Exemplo n.º 1
0
        public void CreateOperation_NoInputOrOutput()
        {
            // Register the test listener
            var testListener = new TestTraceListener();

            using var scopedTraceListener = new ScopedTraceListenerRegister(testListener);

            var fileSystemState = new FileSystemState();
            var readAccessList  = new List <Path>();
            var writeAccessList = new List <Path>();
            var uut             = new OperationGraphGenerator(fileSystemState, readAccessList, writeAccessList);

            uut.CreateOperation(
                "Do Stuff",
                new Path("DoStuff.exe"),
                "do stuff",
                new Path("C:/WorkingDir/"),
                new List <Path>(),
                new List <Path>());

            // Verify expected logs
            Assert.Equal(
                new List <string>()
            {
                "DIAG: Create Operation: Do Stuff",
                "DIAG: Read Access Subset:",
                "DIAG: Write Access Subset:",
            },
                testListener.GetMessages());
        }
Exemplo n.º 2
0
        public void Execute()
        {
            // Register the test systems
            var testListener = new TestTraceListener();

            using (var scopedTraceListener = new ScopedTraceListenerRegister(testListener))
            {
                // Setup the input build state
                var buildState = new MockBuildState();
                var state      = buildState.ActiveState;

                // Set the sdks
                var sdks = new ValueList();
                sdks.Add(new Value(new ValueTable()
                {
                    { "Name", new Value("Roslyn") },
                    {
                        "Properties",
                        new Value(new ValueTable()
                        {
                            { "ToolsRoot", new Value("C:/Roslyn/ToolsRoot/") }
                        })
                    },
                }));

                // Setup parameters table
                var parametersTable = new ValueTable();
                state.Add("Parameters", new Value(parametersTable));
                parametersTable.Add("SDKs", new Value(sdks));
                parametersTable.Add("System", new Value("win32"));
                parametersTable.Add("Architecture", new Value("x64"));

                // Setup build table
                var buildTable = new ValueTable();
                state.Add("Build", new Value(buildTable));

                var factory = new ValueFactory();
                var uut     = new ResolveToolsTask(buildState, factory);

                uut.Execute();

                // Verify expected logs
                Assert.Equal(
                    new List <string>()
                {
                },
                    testListener.GetMessages());

                // Verify build state
                var expectedBuildOperations = new List <BuildOperation>();

                Assert.Equal(
                    expectedBuildOperations,
                    buildState.GetBuildOperations());
            }
        }
Exemplo n.º 3
0
        public void Build_Executable()
        {
            // Register the test systems
            var testListener = new TestTraceListener();

            using (var scopedTraceListener = new ScopedTraceListenerRegister(testListener))
            {
                // Setup the input build state
                var buildState = new MockBuildState();
                var state      = buildState.ActiveState;
                state.Add("PlatformLibraries", new Value(new ValueList()));
                state.Add("PlatformIncludePaths", new Value(new ValueList()));
                state.Add("PlatformLibraryPaths", new Value(new ValueList()));
                state.Add("PlatformPreprocessorDefinitions", new Value(new ValueList()));

                // Setup recipe table
                var buildTable = new ValueTable();
                state.Add("Recipe", new Value(buildTable));
                buildTable.Add("Name", new Value("Program"));

                // Setup parameters table
                var parametersTable = new ValueTable();
                state.Add("Parameters", new Value(parametersTable));
                parametersTable.Add("TargetDirectory", new Value("C:/Target/"));
                parametersTable.Add("PackageDirectory", new Value("C:/PackageRoot/"));
                parametersTable.Add("Compiler", new Value("MOCK"));
                parametersTable.Add("Flavor", new Value("debug"));

                var factory = new ValueFactory();
                var uut     = new RecipeBuildTask(buildState, factory);

                uut.Execute();

                // Verify expected logs
                Assert.Equal(
                    new List <string>()
                {
                },
                    testListener.GetMessages());

                // Verify build state
                var expectedBuildOperations = new List <BuildOperation>();

                Assert.Equal(
                    expectedBuildOperations,
                    buildState.GetBuildOperations());

                // TODO: Verify output build state
            }
        }
Exemplo n.º 4
0
        public void Build_Library_MultipleFiles()
        {
            // Register the test process manager
            var processManager = new MockProcessManager();

            // Register the test listener
            var testListener = new TestTraceListener();

            using (var scopedTraceListener = new ScopedTraceListenerRegister(testListener))
                using (var scopedProcesManager = new ScopedSingleton <IProcessManager>(processManager))
                {
                    // Register the mock compiler
                    var compiler = new Mock.Compiler();

                    // Setup the build arguments
                    var arguments = new BuildArguments();
                    arguments.TargetName          = "Library";
                    arguments.TargetType          = BuildTargetType.Library;
                    arguments.SourceRootDirectory = new Path("C:/source/");
                    arguments.TargetRootDirectory = new Path("C:/target/");
                    arguments.ObjectDirectory     = new Path("obj/");
                    arguments.BinaryDirectory     = new Path("bin/");
                    arguments.SourceFiles         = new List <Path>()
                    {
                        new Path("TestFile1.cs"),
                        new Path("TestFile2.cs"),
                        new Path("TestFile3.cs"),
                    };
                    arguments.OptimizationLevel = BuildOptimizationLevel.Size;
                    arguments.LinkDependencies  = new List <Path>()
                    {
                        new Path("../Other/bin/OtherModule1.mock.a"),
                        new Path("../OtherModule2.mock.a"),
                    };
                    arguments.NullableState = BuildNullableState.Disabled;

                    var uut             = new BuildEngine(compiler);
                    var fileSystemState = new FileSystemState();
                    var readAccessList  = new List <Path>();
                    var writeAccessList = new List <Path>();
                    var buildState      = new BuildState(new ValueTable(), fileSystemState, readAccessList, writeAccessList);
                    var result          = uut.Execute(buildState, arguments);

                    // Verify expected process manager requests
                    Assert.Equal(
                        new List <string>()
                    {
                        "GetCurrentProcessFileName",
                        "GetCurrentProcessFileName",
                        "GetCurrentProcessFileName",
                    },
                        processManager.GetRequests());

                    // Verify expected logs
                    Assert.Equal(
                        new List <string>()
                    {
                    },
                        testListener.GetMessages());

                    // Setup the shared arguments
                    var expectedCompileArguments = new CompileArguments()
                    {
                        Target              = new Path("./bin/Library.mock.dll"),
                        ReferenceTarget     = new Path("./bin/ref/Library.mock.dll"),
                        SourceRootDirectory = new Path("C:/source/"),
                        TargetRootDirectory = new Path("C:/target/"),
                        ObjectDirectory     = new Path("obj/"),
                        SourceFiles         = new List <Path>()
                        {
                            new Path("TestFile1.cs"),
                            new Path("TestFile2.cs"),
                            new Path("TestFile3.cs"),
                        },
                        ReferenceLibraries = new List <Path>()
                        {
                            new Path("../Other/bin/OtherModule1.mock.a"),
                            new Path("../OtherModule2.mock.a"),
                        },
                        NullableState = NullableState.Disabled,
                    };

                    // Verify expected compiler calls
                    Assert.Equal(
                        new List <CompileArguments>()
                    {
                        expectedCompileArguments,
                    },
                        compiler.GetCompileRequests());

                    // Verify build state
                    var expectedBuildOperations = new List <BuildOperation>()
                    {
                        new BuildOperation(
                            "MakeDir [./obj/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./obj/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./obj/"),
                        }),
                        new BuildOperation(
                            "MakeDir [./bin/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./bin/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/"),
                        }),
                        new BuildOperation(
                            "MakeDir [./bin/ref/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./bin/ref/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/ref/"),
                        }),
                        new BuildOperation(
                            "MockCompile: 1",
                            new Path("MockWorkingDirectory"),
                            new Path("MockCompiler.exe"),
                            "Arguments",
                            new List <Path>()
                        {
                            new Path("InputFile.in"),
                        },
                            new List <Path>()
                        {
                            new Path("OutputFile.out"),
                        }),
                    };

                    Assert.Equal(
                        expectedBuildOperations,
                        result.BuildOperations);

                    Assert.Equal(
                        new List <Path>()
                    {
                        new Path("C:/target/bin/ref/Library.mock.dll"),
                    },
                        result.LinkDependencies);

                    Assert.Equal(
                        new List <Path>()
                    {
                        new Path("C:/target/bin/Library.mock.dll"),
                    },
                        result.RuntimeDependencies);

                    Assert.Equal(
                        new Path("C:/target/bin/Library.mock.dll"),
                        result.TargetFile);
                }
        }
Exemplo n.º 5
0
        public void Build_Executable()
        {
            // Register the test process manager
            var processManager = new MockProcessManager();

            // Register the test listener
            var testListener = new TestTraceListener();

            using (var scopedTraceListener = new ScopedTraceListenerRegister(testListener))
                using (var scopedProcesManager = new ScopedSingleton <IProcessManager>(processManager))
                {
                    // Register the mock compiler
                    var compiler = new Mock.Compiler();

                    // Setup the build arguments
                    var arguments = new BuildArguments();
                    arguments.TargetName          = "Program";
                    arguments.TargetType          = BuildTargetType.Executable;
                    arguments.SourceRootDirectory = new Path("C:/source/");
                    arguments.TargetRootDirectory = new Path("C:/target/");
                    arguments.ObjectDirectory     = new Path("obj/");
                    arguments.BinaryDirectory     = new Path("bin/");
                    arguments.SourceFiles         = new List <Path>()
                    {
                        new Path("TestFile.cs"),
                    };
                    arguments.OptimizationLevel = BuildOptimizationLevel.None;
                    arguments.LinkDependencies  = new List <Path>()
                    {
                        new Path("../Other/bin/OtherModule1.mock.a"),
                        new Path("../OtherModule2.mock.a"),
                    };

                    var uut             = new BuildEngine(compiler);
                    var fileSystemState = new FileSystemState();
                    var readAccessList  = new List <Path>();
                    var writeAccessList = new List <Path>();
                    var buildState      = new BuildState(new ValueTable(), fileSystemState, readAccessList, writeAccessList);
                    var result          = uut.Execute(buildState, arguments);

                    // Verify expected process manager requests
                    Assert.Equal(
                        new List <string>()
                    {
                        "GetCurrentProcessFileName",
                        "GetCurrentProcessFileName",
                        "GetCurrentProcessFileName",
                    },
                        processManager.GetRequests());

                    // Verify expected logs
                    Assert.Equal(
                        new List <string>()
                    {
                    },
                        testListener.GetMessages());

                    var expectedCompileArguments = new CompileArguments()
                    {
                        Target              = new Path("./bin/Program.mock.dll"),
                        ReferenceTarget     = new Path("./bin/ref/Program.mock.dll"),
                        TargetType          = LinkTarget.Executable,
                        ObjectDirectory     = new Path("obj/"),
                        SourceRootDirectory = new Path("C:/source/"),
                        TargetRootDirectory = new Path("C:/target/"),
                        SourceFiles         = new List <Path>()
                        {
                            new Path("TestFile.cs"),
                        },
                        ReferenceLibraries = new List <Path>()
                        {
                            new Path("../Other/bin/OtherModule1.mock.a"),
                            new Path("../OtherModule2.mock.a"),
                        },
                        NullableState = NullableState.Enabled,
                    };

                    // Verify expected compiler calls
                    var val       = compiler.GetCompileRequests()[0];
                    var areEqual  = val == expectedCompileArguments;
                    var areEqual2 = val.ObjectDirectory == expectedCompileArguments.ObjectDirectory;
                    Assert.Equal(
                        new List <CompileArguments>()
                    {
                        expectedCompileArguments,
                    },
                        compiler.GetCompileRequests());

                    var expectedBuildOperations = new List <BuildOperation>()
                    {
                        new BuildOperation(
                            "MakeDir [./obj/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./obj/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./obj/"),
                        }),
                        new BuildOperation(
                            "MakeDir [./bin/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./bin/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/"),
                        }),
                        new BuildOperation(
                            "MakeDir [./bin/ref/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./bin/ref/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/ref/"),
                        }),
                        new BuildOperation(
                            "MockCompile: 1",
                            new Path("MockWorkingDirectory"),
                            new Path("MockCompiler.exe"),
                            "Arguments",
                            new List <Path>()
                        {
                            new Path("./InputFile.in"),
                        },
                            new List <Path>()
                        {
                            new Path("./OutputFile.out"),
                        }),
                        new BuildOperation(
                            "WriteFile [./bin/Program.runtimeconfig.json]",
                            new Path("C:/target/"),
                            new Path("./writefile.exe"),
                            @"""./bin/Program.runtimeconfig.json"" ""{
  ""runtimeOptions"": {
    ""tfm"": ""net5.0"",
    ""framework"": {
      ""name"": ""Microsoft.NETCore.App"",
      ""version"": ""5.0.0""
    }
  }
}""",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/Program.runtimeconfig.json"),
                        }),
                    };

                    Assert.Equal(
                        expectedBuildOperations,
                        result.BuildOperations);

                    Assert.Equal(
                        new List <Path>(),
                        result.LinkDependencies);

                    Assert.Equal(
                        new List <Path>()
                    {
                        new Path("C:/target/bin/Program.mock.dll"),
                    },
                        result.RuntimeDependencies);
                }
        }
Exemplo n.º 6
0
        public void Build_Executable()
        {
            // Register the test process manager
            var processManager = new MockProcessManager();

            // Register the test listener
            var testListener = new TestTraceListener();

            using (var scopedTraceListener = new ScopedTraceListenerRegister(testListener))
                using (var scopedProcesManager = new ScopedSingleton <IProcessManager>(processManager))
                {
                    // Setup the input build state
                    var buildState = new MockBuildState();
                    var state      = buildState.ActiveState;

                    // Setup build table
                    var buildTable = new ValueTable();
                    state.Add("Build", new Value(buildTable));
                    buildTable.Add("TargetName", new Value("Program"));
                    buildTable.Add("TargetType", new Value((long)BuildTargetType.Executable));
                    buildTable.Add("SourceRootDirectory", new Value("C:/source/"));
                    buildTable.Add("TargetRootDirectory", new Value("C:/target/"));
                    buildTable.Add("ObjectDirectory", new Value("obj/"));
                    buildTable.Add("BinaryDirectory", new Value("bin/"));
                    buildTable.Add(
                        "Source",
                        new Value(new ValueList()
                    {
                        new Value("TestFile.cs"),
                    }));

                    // Setup parameters table
                    var parametersTable = new ValueTable();
                    state.Add("Parameters", new Value(parametersTable));
                    parametersTable.Add("Architecture", new Value("x64"));
                    parametersTable.Add("Compiler", new Value("MOCK"));

                    // Register the mock compiler
                    var compiler        = new Compiler.Mock.Compiler();
                    var compilerFactory = new Dictionary <string, Func <IValueTable, ICompiler> >();
                    compilerFactory.Add("MOCK", (IValueTable state) => { return(compiler); });

                    var factory = new ValueFactory();
                    var uut     = new BuildTask(buildState, factory, compilerFactory);

                    uut.Execute();

                    // Verify expected process manager requests
                    Assert.Equal(
                        new List <string>()
                    {
                        "GetCurrentProcessFileName",
                        "GetCurrentProcessFileName",
                        "GetCurrentProcessFileName",
                    },
                        processManager.GetRequests());

                    // Verify expected logs
                    Assert.Equal(
                        new List <string>()
                    {
                        "INFO: Build Generate Done"
                    },
                        testListener.GetMessages());

                    var expectedCompileArguments = new CompileArguments()
                    {
                        Target              = new Path("./bin/Program.mock.dll"),
                        ReferenceTarget     = new Path("./bin/ref/Program.mock.dll"),
                        TargetType          = LinkTarget.Executable,
                        SourceRootDirectory = new Path("C:/source/"),
                        TargetRootDirectory = new Path("C:/target/"),
                        ObjectDirectory     = new Path("obj/"),
                        SourceFiles         = new List <Path>()
                        {
                            new Path("TestFile.cs")
                        },
                    };

                    // Verify expected compiler calls
                    Assert.Equal(
                        new List <CompileArguments>()
                    {
                        expectedCompileArguments,
                    },
                        compiler.GetCompileRequests());

                    // Verify build state
                    var expectedBuildOperations = new List <BuildOperation>()
                    {
                        new BuildOperation(
                            "MakeDir [./obj/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./obj/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./obj/"),
                        }),
                        new BuildOperation(
                            "MakeDir [./bin/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./bin/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/"),
                        }),
                        new BuildOperation(
                            "MakeDir [./bin/ref/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./bin/ref/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/ref/"),
                        }),
                        new BuildOperation(
                            "MockCompile: 1",
                            new Path("MockWorkingDirectory"),
                            new Path("MockCompiler.exe"),
                            "Arguments",
                            new List <Path>()
                        {
                            new Path("./InputFile.in"),
                        },
                            new List <Path>()
                        {
                            new Path("./OutputFile.out"),
                        }),
                        new BuildOperation(
                            "WriteFile [./bin/Program.runtimeconfig.json]",
                            new Path("C:/target/"),
                            new Path("./writefile.exe"),
                            @"""./bin/Program.runtimeconfig.json"" ""{
  ""runtimeOptions"": {
    ""tfm"": ""net5.0"",
    ""framework"": {
      ""name"": ""Microsoft.NETCore.App"",
      ""version"": ""5.0.0""
    }
  }
}""",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/Program.runtimeconfig.json"),
                        }),
                    };

                    Assert.Equal(
                        expectedBuildOperations,
                        buildState.GetBuildOperations());
                }
        }
Exemplo n.º 7
0
        public void Build_Library_MultipleFiles()
        {
            // Register the test process manager
            var processManager = new MockProcessManager();

            // Register the test listener
            var testListener = new TestTraceListener();

            using (var scopedTraceListener = new ScopedTraceListenerRegister(testListener))
                using (var scopedProcesManager = new ScopedSingleton <IProcessManager>(processManager))
                {
                    // Setup the input build state
                    var buildState = new MockBuildState();
                    var state      = buildState.ActiveState;

                    // Setup build table
                    var buildTable = new ValueTable();
                    state.Add("Build", new Value(buildTable));
                    buildTable.Add("TargetName", new Value("Library"));
                    buildTable.Add("TargetType", new Value((long)BuildTargetType.Library));
                    buildTable.Add("SourceRootDirectory", new Value("C:/source/"));
                    buildTable.Add("TargetRootDirectory", new Value("C:/target/"));
                    buildTable.Add("ObjectDirectory", new Value("obj/"));
                    buildTable.Add("BinaryDirectory", new Value("bin/"));
                    buildTable.Add("Source", new Value(new ValueList()
                    {
                        new Value("TestFile1.cpp"),
                        new Value("TestFile2.cpp"),
                        new Value("TestFile3.cpp"),
                    }));
                    buildTable.Add("IncludeDirectories", new Value(new ValueList()
                    {
                        new Value("Folder"),
                        new Value("AnotherFolder/Sub"),
                    }));
                    buildTable.Add("ModuleDependencies", new Value(new ValueList()
                    {
                        new Value("../Other/bin/OtherModule1.mock.bmi"),
                        new Value("../OtherModule2.mock.bmi"),
                    }));
                    buildTable.Add("OptimizationLevel", new Value((long)BuildOptimizationLevel.None));

                    // Setup parameters table
                    var parametersTable = new ValueTable();
                    state.Add("Parameters", new Value(parametersTable));
                    parametersTable.Add("Architecture", new Value("x64"));
                    parametersTable.Add("Compiler", new Value("MOCK"));

                    // Register the mock compiler
                    var compiler        = new Compiler.Mock.Compiler();
                    var compilerFactory = new Dictionary <string, Func <IValueTable, ICompiler> >();
                    compilerFactory.Add("MOCK", (IValueTable state) => { return(compiler); });

                    var factory = new ValueFactory();
                    var uut     = new BuildTask(buildState, factory, compilerFactory);

                    uut.Execute();

                    // Verify expected process manager requests
                    Assert.Equal(
                        new List <string>()
                    {
                        "GetCurrentProcessFileName",
                        "GetCurrentProcessFileName",
                        "GetCurrentProcessFileName",
                    },
                        processManager.GetRequests());

                    // Verify expected logs
                    Assert.Equal(
                        new List <string>()
                    {
                        "INFO: Build Generate Done",
                    },
                        testListener.GetMessages());

                    // Setup the shared arguments
                    var expectedCompileArguments = new CompileArguments()
                    {
                        Target              = new Path("./bin/Library.mock.dll"),
                        ReferenceTarget     = new Path("./bin/ref/Library.mock.dll"),
                        SourceRootDirectory = new Path("C:/source/"),
                        TargetRootDirectory = new Path("C:/target/"),
                        ObjectDirectory     = new Path("obj/"),
                        SourceFiles         = new List <Path>()
                        {
                            new Path("TestFile1.cpp"),
                            new Path("TestFile2.cpp"),
                            new Path("TestFile3.cpp"),
                        },
                    };

                    // Verify expected compiler calls
                    Assert.Equal(
                        new List <CompileArguments>()
                    {
                        expectedCompileArguments,
                    },
                        compiler.GetCompileRequests());

                    // Verify build state
                    var expectedBuildOperations = new List <BuildOperation>()
                    {
                        new BuildOperation(
                            "MakeDir [./obj/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./obj/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./obj/"),
                        }),
                        new BuildOperation(
                            "MakeDir [./bin/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./bin/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/"),
                        }),
                        new BuildOperation(
                            "MakeDir [./bin/ref/]",
                            new Path("C:/target/"),
                            new Path("C:/mkdir.exe"),
                            "\"./bin/ref/\"",
                            new List <Path>(),
                            new List <Path>()
                        {
                            new Path("./bin/ref/"),
                        }),
                        new BuildOperation(
                            "MockCompile: 1",
                            new Path("MockWorkingDirectory"),
                            new Path("MockCompiler.exe"),
                            "Arguments",
                            new List <Path>()
                        {
                            new Path("./InputFile.in"),
                        },
                            new List <Path>()
                        {
                            new Path("./OutputFile.out"),
                        }),
                    };

                    Assert.Equal(
                        expectedBuildOperations,
                        buildState.GetBuildOperations());
                }
        }
Exemplo n.º 8
0
        public void BuildGraph_DependencyNodes_FlattenGraph()
        {
            // Register the test listener
            var testListener = new TestTraceListener();

            using var scopedTraceListener = new ScopedTraceListenerRegister(testListener);

            var fileSystemState = new FileSystemState();
            var readAccessList  = new List <Path>()
            {
                new Path("C:/WorkingDir/ReadAccess/"),
                new Path("C:/WorkingDir/WriteAccess/"),
            };
            var writeAccessList = new List <Path>()
            {
                new Path("C:/WorkingDir/WriteAccess/"),
            };
            var uut = new OperationGraphGenerator(fileSystemState, readAccessList, writeAccessList);

            uut.CreateOperation(
                "Do Stuff 1",
                new Path("DoStuff.exe"),
                "do stuff 1",
                new Path("C:/WorkingDir/"),
                new List <Path>()
            {
                new Path("./ReadAccess/ReadFile.txt"),
            },
                new List <Path>()
            {
                new Path("./WriteAccess/WriteFile1.txt"),
            });

            uut.CreateOperation(
                "Do Stuff 2",
                new Path("DoStuff.exe"),
                "do stuff 2",
                new Path("C:/WorkingDir/"),
                new List <Path>()
            {
                new Path("./WriteAccess/WriteFile1.txt"),
            },
                new List <Path>()
            {
                new Path("./WriteAccess/WriteFile2.txt"),
            });

            // Create a third operation that reads the output of the other two
            // The graph builder should flatten these references to be dependent on the single second node that already
            // is dependent on the first node.
            uut.CreateOperation(
                "Do Stuff 3",
                new Path("DoStuff.exe"),
                "do stuff 3",
                new Path("C:/WorkingDir/"),
                new List <Path>()
            {
                new Path("./WriteAccess/WriteFile1.txt"),
                new Path("./WriteAccess/WriteFile2.txt"),
            },
                new List <Path>()
            {
                new Path("./WriteAccess/WriteFile3.txt"),
            });

            var graph = uut.BuildGraph();

            // Verify expected logs
            Assert.Equal(
                new List <string>()
            {
                "DIAG: Create Operation: Do Stuff 1",
                "DIAG: Read Access Subset:",
                "DIAG: C:/WorkingDir/ReadAccess/",
                "DIAG: Write Access Subset:",
                "DIAG: C:/WorkingDir/WriteAccess/",
                "DIAG: Create Operation: Do Stuff 2",
                "DIAG: Read Access Subset:",
                "DIAG: C:/WorkingDir/WriteAccess/",
                "DIAG: Write Access Subset:",
                "DIAG: C:/WorkingDir/WriteAccess/",
                "DIAG: Create Operation: Do Stuff 3",
                "DIAG: Read Access Subset:",
                "DIAG: C:/WorkingDir/WriteAccess/",
                "DIAG: Write Access Subset:",
                "DIAG: C:/WorkingDir/WriteAccess/",
            },
                testListener.GetMessages());

            Assert.Equal(
                new Dictionary <OperationId, OperationInfo>()
            {
                {
                    new OperationId(1),
                    new OperationInfo()
                    {
                        Id      = new OperationId(1),
                        Title   = "Do Stuff 1",
                        Command = new CommandInfo()
                        {
                            Executable       = new Path("DoStuff.exe"),
                            Arguments        = "do stuff 1",
                            WorkingDirectory = new Path("C:/WorkingDir/"),
                        },
                        DeclaredInput = new List <FileId>()
                        {
                            new FileId(1),
                        },
                        DeclaredOutput = new List <FileId>()
                        {
                            new FileId(2),
                        },
                        ReadAccess = new List <FileId>()
                        {
                            new FileId(3),
                        },
                        WriteAccess = new List <FileId>()
                        {
                            new FileId(4),
                        },
                        DependencyCount = 1,
                        Children        = new List <OperationId>()
                        {
                            new OperationId(2),
                        },
                    }
                },
                {
                    new OperationId(2),
                    new OperationInfo()
                    {
                        Id      = new OperationId(2),
                        Title   = "Do Stuff 2",
                        Command = new CommandInfo()
                        {
                            Executable       = new Path("DoStuff.exe"),
                            Arguments        = "do stuff 2",
                            WorkingDirectory = new Path("C:/WorkingDir/"),
                        },
                        DeclaredInput = new List <FileId>()
                        {
                            new FileId(2),
                        },
                        DeclaredOutput = new List <FileId>()
                        {
                            new FileId(5),
                        },
                        ReadAccess = new List <FileId>()
                        {
                            new FileId(4),
                        },
                        WriteAccess = new List <FileId>()
                        {
                            new FileId(4),
                        },
                        DependencyCount = 1,
                        Children        = new List <OperationId>()
                        {
                            new OperationId(3),
                        },
                    }
                },
                {
                    new OperationId(3),
                    new OperationInfo()
                    {
                        Id      = new OperationId(3),
                        Title   = "Do Stuff 3",
                        Command = new CommandInfo()
                        {
                            Executable       = new Path("DoStuff.exe"),
                            Arguments        = "do stuff 3",
                            WorkingDirectory = new Path("C:/WorkingDir/"),
                        },
                        DeclaredInput = new List <FileId>()
                        {
                            new FileId(2), new FileId(5),
                        },
                        DeclaredOutput = new List <FileId>()
                        {
                            new FileId(6),
                        },
                        ReadAccess = new List <FileId>()
                        {
                            new FileId(4),
                        },
                        WriteAccess = new List <FileId>()
                        {
                            new FileId(4),
                        },
                        DependencyCount = 1,
                    }
                },
            },
                graph.GetOperations());
            Assert.Equal(
                new List <OperationId>()
            {
                new OperationId(1),
            },
                graph.GetRootOperationIds());
            Assert.Equal(
                new List <(FileId, Path)>(),
                graph.GetReferencedFiles());
        }
Exemplo n.º 9
0
        public void BuildGraph_SingleNodes()
        {
            // Register the test listener
            var testListener = new TestTraceListener();

            using var scopedTraceListener = new ScopedTraceListenerRegister(testListener);

            var fileSystemState = new FileSystemState();
            var readAccessList  = new List <Path>()
            {
                new Path("C:/WorkingDir/ReadAccess/")
            };
            var writeAccessList = new List <Path>()
            {
                new Path("C:/WorkingDir/WriteAccess/")
            };
            var uut = new OperationGraphGenerator(fileSystemState, readAccessList, writeAccessList);

            uut.CreateOperation(
                "Do Stuff",
                new Path("DoStuff.exe"),
                "do stuff",
                new Path("C:/WorkingDir/"),
                new List <Path>()
            {
                new Path("./ReadAccess/ReadFile.txt"),
            },
                new List <Path>()
            {
                new Path("./WriteAccess/WriteFile.txt"),
            });

            var graph = uut.BuildGraph();

            // Verify expected logs
            Assert.Equal(
                new List <string>()
            {
                "DIAG: Create Operation: Do Stuff",
                "DIAG: Read Access Subset:",
                "DIAG: C:/WorkingDir/ReadAccess/",
                "DIAG: Write Access Subset:",
                "DIAG: C:/WorkingDir/WriteAccess/",
            },
                testListener.GetMessages());

            Assert.Equal(
                new Dictionary <OperationId, OperationInfo>()
            {
                {
                    new OperationId(1),
                    new OperationInfo()
                    {
                        Id      = new OperationId(1),
                        Title   = "Do Stuff",
                        Command = new CommandInfo()
                        {
                            Executable       = new Path("DoStuff.exe"),
                            Arguments        = "do stuff",
                            WorkingDirectory = new Path("C:/WorkingDir/"),
                        },
                        DeclaredInput = new List <FileId>()
                        {
                            new FileId(1),
                        },
                        DeclaredOutput = new List <FileId>()
                        {
                            new FileId(2),
                        },
                        ReadAccess = new List <FileId>()
                        {
                            new FileId(3),
                        },
                        WriteAccess = new List <FileId>()
                        {
                            new FileId(4),
                        },
                        DependencyCount = 1,
                    }
                },
            },
                graph.GetOperations());
            Assert.Equal(
                new List <OperationId>()
            {
                new OperationId(1),
            },
                graph.GetRootOperationIds());
            Assert.Equal(
                new List <(FileId, Path)>(),
                graph.GetReferencedFiles());
        }