void InitializeAndStartBarcodeScanning()
{
ScanSettings settings = ScanSettings.Create();
int[] symbologiesToEnable = new int[] {
Barcode.SymbologyEan13,
Barcode.SymbologyEan8,
Barcode.SymbologyUpca,
Barcode.SymbologyDataMatrix,
Barcode.SymbologyQr,
Barcode.SymbologyCode39,
Barcode.SymbologyCode128,
Barcode.SymbologyInterleaved2Of5,
Barcode.SymbologyUpce
};
foreach (int symbology in symbologiesToEnable)
{
settings.SetSymbologyEnabled(symbology, true);
}
SymbologySettings symSettings = settings.GetSymbologySettings(Barcode.SymbologyCode128);
short[] activeSymbolCounts = new short[] {
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
};
symSettings.SetActiveSymbolCounts(activeSymbolCounts);
barcodePicker = new BarcodePicker(this, settings);
barcodePicker.SetOnScanListener(this);
SetContentView(barcodePicker);
}
protected override void OnCreate(Bundle bundle)
{
base.OnCreate(bundle);
RequestWindowFeature(WindowFeatures.NoTitle);
Window.SetFlags(WindowManagerFlags.Fullscreen, WindowManagerFlags.Fullscreen);
// Set the app key before instantiating the picker.
ScanditLicense.AppKey = appKey;
// The scanning behavior of the barcode picker is configured through scan
// settings. We start with empty scan settings and enable a very generous
// set of symbologies. In your own apps, only enable the symbologies you
// actually need.
ScanSettings settings = ScanSettings.Create();
int[] symbologiesToEnable = new int[] {
Barcode.SymbologyEan13,
Barcode.SymbologyEan8,
Barcode.SymbologyUpca,
Barcode.SymbologyDataMatrix,
Barcode.SymbologyQr,
Barcode.SymbologyCode39,
Barcode.SymbologyCode128,
Barcode.SymbologyInterleaved2Of5,
Barcode.SymbologyUpce
};
for (int sym = 0; sym < symbologiesToEnable.Length; sym++)
{
settings.SetSymbologyEnabled(symbologiesToEnable[sym], true);
}
// Some 1d barcode symbologies allow you to encode variable-length data. By default, the
// Scandit BarcodeScanner SDK only scans barcodes in a certain length range. If your
// application requires scanning of one of these symbologies, and the length is falling
// outside the default range, you may need to adjust the "active symbol counts" for this
// symbology. This is shown in the following few lines of code.
SymbologySettings symSettings = settings.GetSymbologySettings(Barcode.SymbologyCode128);
short[] activeSymbolCounts = new short[] {
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
};
symSettings.SetActiveSymbolCounts(activeSymbolCounts);
// For details on defaults and how to calculate the symbol counts for each symbology, take
// a look at http://docs.scandit.com/stable/c_api/symbologies.html.
picker = new BarcodePicker(this, settings);
// Set listener for the scan event.
picker.SetOnScanListener(this);
// Show the scan user interface
SetContentView(picker);
}
void InitializeAndStartBarcodeScanning()
{
// The scanning behavior of the barcode picker is configured through scan
// settings. We start with empty scan settings and enable a very generous
// set of symbologies. In your own apps, only enable the symbologies you
// actually need.
ScanSettings settings = ScanSettings.Create();
int[] symbologiesToEnable = new int[] {
Barcode.SymbologyEan13,
Barcode.SymbologyEan8,
Barcode.SymbologyUpca,
Barcode.SymbologyDataMatrix,
Barcode.SymbologyQr,
Barcode.SymbologyCode39,
Barcode.SymbologyCode128,
Barcode.SymbologyInterleaved2Of5,
Barcode.SymbologyUpce
};
foreach (int symbology in symbologiesToEnable)
{
settings.SetSymbologyEnabled(symbology, true);
}
// Some 1d barcode symbologies allow you to encode variable-length data. By default, the
// Scandit BarcodeScanner SDK only scans barcodes in a certain length range. If your
// application requires scanning of one of these symbologies, and the length is falling
// outside the default range, you may need to adjust the "active symbol counts" for this
// symbology. This is shown in the following few lines of code.
SymbologySettings symSettings = settings.GetSymbologySettings(Barcode.SymbologyCode128);
short[] activeSymbolCounts = new short[] {
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
};
symSettings.SetActiveSymbolCounts(activeSymbolCounts);
// For details on defaults and how to calculate the symbol counts for each symbology, take
// a look at http://docs.scandit.com/stable/c_api/symbologies.html.
barcodePicker = new BarcodePicker(this, settings);
// Set listener for the scan event.
barcodePicker.SetOnScanListener(this);
// Show the scan user interface
SetContentView(barcodePicker);
}
protected override void OnCreate(Bundle bundle)
{
base.OnCreate(bundle);
RequestWindowFeature(WindowFeatures.NoTitle);
Window.SetFlags(WindowManagerFlags.Fullscreen, WindowManagerFlags.Fullscreen);
ScanditLicense.AppKey = appKey;
ScanSettings settings = ScanSettings.Create();
int[] symbologiesToEnable = new int[] {
Barcode.SymbologyEan13,
Barcode.SymbologyEan8,
Barcode.SymbologyUpca,
Barcode.SymbologyDataMatrix,
Barcode.SymbologyQr,
Barcode.SymbologyCode39,
Barcode.SymbologyCode128,
Barcode.SymbologyInterleaved2Of5,
Barcode.SymbologyUpce
};
for (int sym = 0; sym < symbologiesToEnable.Length; sym++)
{
settings.SetSymbologyEnabled(symbologiesToEnable[sym], true);
}
SymbologySettings symSettings = settings.GetSymbologySettings(Barcode.SymbologyCode128);
short[] activeSymbolCounts = new short[] {
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
};
symSettings.SetActiveSymbolCounts(activeSymbolCounts);
// For details on defaults and how to calculate the symbol counts for each symbology, take
// a look at http://docs.scandit.com/stable/c_api/symbologies.html.
picker = new BarcodePicker(this, settings);
picker.SetOnScanListener(this);
SetContentView(picker);
}
protected override void OnElementChanged(ElementChangedEventArgs <CustomStackLayout> e)
{
base.OnElementChanged(e);
//var test = this as ViewGroup;
if (e.NewElement != null)
{
// Set the app key before instantiating the picker.
ScanditLicense.AppKey = appKey;
// The scanning behavior of the barcode picker is configured through scan
// settings. We start with empty scan settings and enable a very generous
// set of symbologies. In your own apps, only enable the symbologies you
// actually need.
ScanSettings settings = ScanSettings.Create();
int[] symbologiesToEnable = new int[]
{
Barcode.SymbologyEan13,
Barcode.SymbologyEan8,
Barcode.SymbologyUpca,
Barcode.SymbologyDataMatrix,
Barcode.SymbologyQr,
Barcode.SymbologyCode39,
Barcode.SymbologyCode128,
Barcode.SymbologyInterleaved2Of5,
Barcode.SymbologyUpce
};
for (int sym = 0; sym < symbologiesToEnable.Length; sym++)
{
settings.SetSymbologyEnabled(symbologiesToEnable[sym], true);
}
//// Some 1d barcode symbologies allow you to encode variable-length data. By default, the
//// Scandit BarcodeScanner SDK only scans barcodes in a certain length range. If your
//// application requires scanning of one of these symbologies, and the length is falling
//// outside the default range, you may need to adjust the "active symbol counts" for this
//// symbology. This is shown in the following few lines of code.
SymbologySettings symSettings = settings.GetSymbologySettings(Barcode.SymbologyCode128);
short[] activeSymbolCounts = new short[]
{
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
};
symSettings.SetActiveSymbolCounts(activeSymbolCounts);
// For details on defaults and how to calculate the symbol counts for each symbology, take
// a look at http://docs.scandit.com/stable/c_api/symbologies.html.
picker = new BarcodePicker(this.Context, settings);
picker.OverlayView.SetViewfinderDimension(0.5f, 0.9f, 0.5f, 0.9f);
picker.OverlayView.SetTorchEnabled(false);
// Set listener for the scan event.
picker.SetOnScanListener(this);
picker.StartScanning();
//picker.Scan += (sender, args) =>
//{
//};
AddView(picker);
//SetNativeControl(picker);
}
}
