Exemplo n.º 1
0
        internal static SMB1Command GetRenameResponse(SMB1Header header, RenameRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasWriteAccess(session.SecurityContext, request.OldFileName))
                {
                    state.LogToServer(Severity.Verbose, "Rename '{0}{1}' to '{0}{2}' failed. User '{3}' was denied access.", share.Name, request.OldFileName, request.NewFileName, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
                if (!((FileSystemShare)share).HasWriteAccess(session.SecurityContext, request.NewFileName))
                {
                    state.LogToServer(Severity.Verbose, "Rename '{0}{1}' to '{0}{2}' failed. User '{3}' was denied access.", share.Name, request.OldFileName, request.NewFileName, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }

            header.Status = SMB1FileStoreHelper.Rename(share.FileStore, request.OldFileName, request.NewFileName, request.SearchAttributes, session.SecurityContext);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "Rename '{0}{1}' to '{0}{2}' failed. NTStatus: {3}.", share.Name, request.OldFileName, request.NewFileName, header.Status);
                return(new ErrorResponse(request.CommandName));
            }
            state.LogToServer(Severity.Verbose, "Rename: User '{0}' renamed '{1}{2}' to '{1}{3}'.", session.UserName, share.Name, request.OldFileName, request.NewFileName);
            return(new RenameResponse());
        }
Exemplo n.º 2
0
        internal static SMB1Command GetSetInformation2Response(SMB1Header header, SetInformation2Request request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session    session  = state.GetSession(header.UID);
            OpenFileObject openFile = session.GetOpenFileObject(request.FID);

            if (openFile == null)
            {
                state.LogToServer(Severity.Verbose, "Set Information 2 failed. Invalid FID. (UID: {0}, TID: {1}, FID: {2})", header.UID, header.TID, request.FID);
                header.Status = NTStatus.STATUS_SMB_BAD_FID;
                return(new ErrorResponse(request.CommandName));
            }

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasWriteAccess(session.SecurityContext, openFile.Path))
                {
                    state.LogToServer(Severity.Verbose, "Set Information 2 on '{0}{1}' failed. User '{2}' was denied access.", share.Name, openFile.Path, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }

            header.Status = SMB1FileStoreHelper.SetInformation2(share.FileStore, openFile.Handle, request.CreationDateTime, request.LastAccessDateTime, request.LastWriteDateTime);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "Set Information 2 on '{0}{1}' failed. NTStatus: {2}", share.Name, openFile.Path, header.Status);
                return(new ErrorResponse(request.CommandName));
            }

            state.LogToServer(Severity.Verbose, "Set Information 2 on '{0}{1}' succeeded.", share.Name, openFile.Path);
            return(new SetInformation2Response());
        }
Exemplo n.º 3
0
        internal static SMB1Command GetQueryInformationResponse(SMB1Header header, QueryInformationRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);
            string      path    = request.FileName;

            if (!path.StartsWith(@"\"))
            {
                path = @"\" + path;
            }

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasReadAccess(session.SecurityContext, path))
                {
                    state.LogToServer(Severity.Verbose, "Query Information on '{0}{1}' failed. User '{2}' was denied access.", share.Name, path, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }

            FileNetworkOpenInformation fileInfo;

            header.Status = SMB1FileStoreHelper.QueryInformation(out fileInfo, share.FileStore, path, session.SecurityContext);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                return(new ErrorResponse(request.CommandName));
            }

            QueryInformationResponse response = new QueryInformationResponse();

            response.FileAttributes = SMB1FileStoreHelper.GetFileAttributes(fileInfo.FileAttributes);
            response.LastWriteTime  = fileInfo.LastWriteTime;
            response.FileSize       = (uint)Math.Min(UInt32.MaxValue, fileInfo.EndOfFile);
            return(response);
        }
Exemplo n.º 4
0
        internal static SMB1Command GetCheckDirectoryResponse(SMB1Header header, CheckDirectoryRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);
            string      path    = request.DirectoryName;

            if (!path.StartsWith(@"\"))
            {
                path = @"\" + path;
            }

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasReadAccess(session.SecurityContext, path))
                {
                    state.LogToServer(Severity.Verbose, "Check Directory '{0}{1}' failed. User '{2}' was denied access.", share.Name, path, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }

            header.Status = SMB1FileStoreHelper.CheckDirectory(share.FileStore, path, session.SecurityContext);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                return(new ErrorResponse(request.CommandName));
            }

            return(new CheckDirectoryResponse());
        }
Exemplo n.º 5
0
        /// <summary>
        /// There are no secondary response messages.
        /// The client MUST send as many secondary requests as are needed to complete the transfer of the transaction request.
        /// </summary>
        internal static List <SMB1Command> GetNTTransactResponse(SMB1Header header, NTTransactSecondaryRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            ProcessStateObject processState = state.GetProcessState(header.PID);

            if (processState == null)
            {
                throw new InvalidDataException();
            }
            ByteWriter.WriteBytes(processState.TransactionParameters, (int)request.ParameterDisplacement, request.TransParameters);
            ByteWriter.WriteBytes(processState.TransactionData, (int)request.DataDisplacement, request.TransData);
            processState.TransactionParametersReceived += request.TransParameters.Length;
            processState.TransactionDataReceived       += request.TransData.Length;

            if (processState.TransactionParametersReceived < processState.TransactionParameters.Length ||
                processState.TransactionDataReceived < processState.TransactionData.Length)
            {
                return(new List <SMB1Command>());
            }
            else
            {
                // We have a complete command
                state.RemoveProcessState(header.PID);
                return(GetCompleteNTTransactResponse(header, processState.MaxParameterCount, processState.MaxDataCount, (NTTransactSubcommandName)processState.SubcommandID, processState.TransactionSetup, processState.TransactionParameters, processState.TransactionData, share, state));
            }
        }
Exemplo n.º 6
0
 /// <summary>
 /// The client MUST send as many secondary requests as are needed to complete the transfer of the transaction request.
 /// </summary>
 internal static List <SMB1Command> GetNTTransactResponse(SMB1Header header, NTTransactRequest request, ISMBShare share, SMB1ConnectionState state)
 {
     if (request.TransParameters.Length < request.TotalParameterCount ||
         request.TransData.Length < request.TotalDataCount)
     {
         // A secondary transaction request is pending
         ProcessStateObject processState = state.CreateProcessState(header.PID);
         processState.SubcommandID          = (ushort)request.Function;
         processState.MaxParameterCount     = request.MaxParameterCount;
         processState.MaxDataCount          = request.MaxDataCount;
         processState.TransactionSetup      = request.Setup;
         processState.TransactionParameters = new byte[request.TotalParameterCount];
         processState.TransactionData       = new byte[request.TotalDataCount];
         ByteWriter.WriteBytes(processState.TransactionParameters, 0, request.TransParameters);
         ByteWriter.WriteBytes(processState.TransactionData, 0, request.TransData);
         processState.TransactionParametersReceived += request.TransParameters.Length;
         processState.TransactionDataReceived       += request.TransData.Length;
         return(new NTTransactInterimResponse());
     }
     else
     {
         // We have a complete command
         return(GetCompleteNTTransactResponse(header, request.MaxParameterCount, request.MaxDataCount, request.Function, request.Setup, request.TransParameters, request.TransData, share, state));
     }
 }
Exemplo n.º 7
0
        internal static SMB1Command GetFindClose2Response(SMB1Header header, FindClose2Request request, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);

            session.RemoveOpenSearch(request.SearchHandle);
            return(new FindClose2Response());
        }
        internal static void ProcessSubcommand(SMB1Header header, uint timeout, string name, TransactionWaitNamedPipeRequest subcommand, ISMBShare share, SMB1ConnectionState state)
        {
            if (!name.StartsWith(@"\PIPE\", StringComparison.OrdinalIgnoreCase))
            {
                // [MS-CIFS] The name field MUST be set to the name of the pipe being waited for, in the format \PIPE\<pipename>
                state.LogToServer(Severity.Verbose, "TransactWaitNamedPipe failed. Invalid pipe name: {0}.", name);
                header.Status = NTStatus.STATUS_INVALID_SMB;
            }

            string          pipeName        = name.Substring(6);
            PipeWaitRequest pipeWaitRequest = new PipeWaitRequest();

            pipeWaitRequest.Timeout       = timeout;
            pipeWaitRequest.TimeSpecified = true;
            pipeWaitRequest.Name          = pipeName;
            byte[] input = pipeWaitRequest.GetBytes();
            byte[] output;
            header.Status = share.FileStore.DeviceIOControl(null, (uint)IoControlCode.FSCTL_PIPE_WAIT, input, out output, 0);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "TransactWaitNamedPipe failed. Pipe name: {0}. NTStatus: {1}.", pipeName, header.Status);
            }
            else
            {
                state.LogToServer(Severity.Verbose, "TransactWaitNamedPipe succeeded. Pipe name: {0}.", pipeName);
            }
        }
Exemplo n.º 9
0
 private static void PrepareResponseHeader(SMB1Header responseHeader, SMB1Header requestHeader)
 {
     responseHeader.Status = NTStatus.STATUS_SUCCESS;
     responseHeader.Flags  = HeaderFlags.CaseInsensitive | HeaderFlags.CanonicalizedPaths | HeaderFlags.Reply;
     responseHeader.Flags2 = HeaderFlags2.NTStatusCode;
     if ((requestHeader.Flags2 & HeaderFlags2.LongNamesAllowed) > 0)
     {
         responseHeader.Flags2 |= HeaderFlags2.LongNamesAllowed | HeaderFlags2.LongNameUsed;
     }
     if ((requestHeader.Flags2 & HeaderFlags2.ExtendedAttributes) > 0)
     {
         responseHeader.Flags2 |= HeaderFlags2.ExtendedAttributes;
     }
     if ((requestHeader.Flags2 & HeaderFlags2.ExtendedSecurity) > 0)
     {
         responseHeader.Flags2 |= HeaderFlags2.ExtendedSecurity;
     }
     if ((requestHeader.Flags2 & HeaderFlags2.Unicode) > 0)
     {
         responseHeader.Flags2 |= HeaderFlags2.Unicode;
     }
     responseHeader.MID = requestHeader.MID;
     responseHeader.PID = requestHeader.PID;
     responseHeader.UID = requestHeader.UID;
     responseHeader.TID = requestHeader.TID;
 }
Exemplo n.º 10
0
        internal static SMB1Command GetWriteResponse(SMB1Header header, WriteRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session    session  = state.GetSession(header.UID);
            OpenFileObject openFile = session.GetOpenFileObject(request.FID);

            if (openFile == null)
            {
                state.LogToServer(Severity.Verbose, "Write failed. Invalid FID. (UID: {0}, TID: {1}, FID: {2})", header.UID, header.TID, request.FID);
                header.Status = NTStatus.STATUS_INVALID_HANDLE;
                return(new ErrorResponse(request.CommandName));
            }

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasWriteAccess(session.SecurityContext, openFile.Path))
                {
                    state.LogToServer(Severity.Verbose, "Write to '{0}{1}' failed. User '{2}' was denied access.", share.Name, openFile.Path, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }

            int numberOfBytesWritten;

            header.Status = share.FileStore.WriteFile(out numberOfBytesWritten, openFile.Handle, request.WriteOffsetInBytes, request.Data);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "Write to '{0}{1}' failed. NTStatus: {2}. (FID: {3})", share.Name, openFile.Path, header.Status, request.FID);
                return(new ErrorResponse(request.CommandName));
            }
            WriteResponse response = new WriteResponse();

            response.CountOfBytesWritten = (ushort)numberOfBytesWritten;
            return(response);
        }
        internal static TransactionTransactNamedPipeResponse GetSubcommandResponse(SMB1Header header, uint maxDataCount, TransactionTransactNamedPipeRequest subcommand, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session    session  = state.GetSession(header.UID);
            OpenFileObject openFile = session.GetOpenFileObject(subcommand.FID);

            if (openFile == null)
            {
                state.LogToServer(Severity.Verbose, "TransactNamedPipe failed. Invalid FID. (UID: {0}, TID: {1}, FID: {2})", header.UID, header.TID, subcommand.FID);
                header.Status = NTStatus.STATUS_INVALID_HANDLE;
                return(null);
            }

            int maxOutputLength = (int)maxDataCount;

            byte[] output;
            header.Status = share.FileStore.DeviceIOControl(openFile.Handle, (uint)IoControlCode.FSCTL_PIPE_TRANSCEIVE, subcommand.WriteData, out output, maxOutputLength);
            if (header.Status != NTStatus.STATUS_SUCCESS && header.Status != NTStatus.STATUS_BUFFER_OVERFLOW)
            {
                state.LogToServer(Severity.Verbose, "TransactNamedPipe failed. NTStatus: {0}.", header.Status);
                return(null);
            }
            TransactionTransactNamedPipeResponse response = new TransactionTransactNamedPipeResponse();

            response.ReadData = output;
            return(response);
        }
Exemplo n.º 12
0
        internal static SMB1Command GetFlushResponse(SMB1Header header, FlushRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);

            if (request.FID == 0xFFFF)
            {
                // [MS-CIFS] If the FID is 0xFFFF, the Server.Connection.FileOpenTable MUST be scanned for
                // all files that were opened by the PID listed in the request header.
                // The server MUST attempt to flush each Server.Open so listed.
                return(new FlushResponse());
            }

            OpenFileObject openFile = session.GetOpenFileObject(request.FID);

            if (openFile == null)
            {
                state.LogToServer(Severity.Verbose, "Flush failed. Invalid FID. (UID: {0}, TID: {1}, FID: {2})", header.UID, header.TID, request.FID);
                header.Status = NTStatus.STATUS_INVALID_HANDLE;
                return(new ErrorResponse(request.CommandName));
            }
            header.Status = share.FileStore.FlushFileBuffers(openFile.Handle);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "Flush '{0}{1}' failed. NTStatus: {2}. (FID: {3})", share.Name, openFile.Path, header.Status, request.FID);
                return(new ErrorResponse(request.CommandName));
            }
            return(new FlushResponse());
        }
Exemplo n.º 13
0
        internal static SMB1Command GetReadResponse(SMB1Header header, ReadRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session    session  = state.GetSession(header.UID);
            OpenFileObject openFile = session.GetOpenFileObject(request.FID);

            if (openFile == null)
            {
                header.Status = NTStatus.STATUS_INVALID_HANDLE;
                return(null);
            }

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasReadAccess(session.SecurityContext, openFile.Path))
                {
                    state.LogToServer(Severity.Verbose, "Read from '{0}{1}' failed. User '{2}' was denied access.", share.Name, openFile.Path, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }

            byte[] data;
            header.Status = share.FileStore.ReadFile(out data, openFile.Handle, request.ReadOffsetInBytes, request.CountOfBytesToRead);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                return(new ErrorResponse(request.CommandName));
            }

            ReadResponse response = new ReadResponse();

            response.Bytes = data;
            response.CountOfBytesReturned = (ushort)data.Length;
            return(response);
        }
Exemplo n.º 14
0
        internal static NegotiateResponse GetNegotiateResponse(SMB1Header header, NegotiateRequest request, GSSProvider securityProvider, ConnectionState state)
        {
            NegotiateResponse response = new NegotiateResponse();

            response.DialectIndex  = (ushort)request.Dialects.IndexOf(SMBServer.NTLanManagerDialect);
            response.SecurityMode  = SecurityMode.UserSecurityMode | SecurityMode.EncryptPasswords;
            response.MaxMpxCount   = 50;
            response.MaxNumberVcs  = 1;
            response.MaxBufferSize = 16644;
            response.MaxRawSize    = 65536;
            response.Capabilities  = ServerCapabilities.Unicode |
                                     ServerCapabilities.LargeFiles |
                                     ServerCapabilities.NTSMB |
                                     ServerCapabilities.NTStatusCode |
                                     ServerCapabilities.NTFind |
                                     ServerCapabilities.LargeRead |
                                     ServerCapabilities.LargeWrite;
            response.SystemTime     = DateTime.UtcNow;
            response.ServerTimeZone = (short)-TimeZone.CurrentTimeZone.GetUtcOffset(DateTime.Now).TotalMinutes;
            NegotiateMessage negotiateMessage = CreateNegotiateMessage();
            ChallengeMessage challengeMessage;
            NTStatus         status = securityProvider.GetNTLMChallengeMessage(out state.AuthenticationContext, negotiateMessage, out challengeMessage);

            if (status == NTStatus.SEC_I_CONTINUE_NEEDED)
            {
                response.Challenge = challengeMessage.ServerChallenge;
            }
            response.DomainName = String.Empty;
            response.ServerName = String.Empty;

            return(response);
        }
Exemplo n.º 15
0
        /// <summary>
        /// There are no secondary response messages.
        /// The client MUST send as many secondary requests as are needed to complete the transfer of the transaction request.
        /// The server MUST respond to the transaction request as a whole.
        /// </summary>
        internal static List <SMB1Command> GetTransactionResponse(SMB1Header header, TransactionSecondaryRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            ProcessStateObject processState = state.GetProcessState(header.PID);

            if (processState == null)
            {
                throw new InvalidRequestException();
            }
            ByteWriter.WriteBytes(processState.TransactionParameters, request.ParameterDisplacement, request.TransParameters);
            ByteWriter.WriteBytes(processState.TransactionData, request.DataDisplacement, request.TransData);
            processState.TransactionParametersReceived += request.TransParameters.Length;
            processState.TransactionDataReceived       += request.TransData.Length;

            if (processState.TransactionParametersReceived < processState.TransactionParameters.Length ||
                processState.TransactionDataReceived < processState.TransactionData.Length)
            {
                return(new List <SMB1Command>());
            }
            else
            {
                // We have a complete command
                if (request is Transaction2SecondaryRequest)
                {
                    return(GetCompleteTransaction2Response(header, processState.TransactionSetup, processState.TransactionParameters, processState.TransactionData, share, state));
                }
                else
                {
                    return(GetCompleteTransactionResponse(header, processState.Name, processState.TransactionSetup, processState.TransactionParameters, processState.TransactionData, share, state));
                }
            }
        }
Exemplo n.º 16
0
        private static NTTransactIOCTLResponse GetSubcommandResponse(SMB1Header header, NTTransactIOCTLRequest subcommand, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session             session  = state.GetSession(header.UID);
            NTTransactIOCTLResponse response = new NTTransactIOCTLResponse();

            if (subcommand.IsFsctl)
            {
                OpenFileObject openFile = session.GetOpenFileObject(subcommand.FID);
                if (openFile == null)
                {
                    header.Status = NTStatus.STATUS_INVALID_HANDLE;
                    return(null);
                }
                int    maxOutputLength = UInt16.MaxValue;
                byte[] output;
                header.Status = share.FileStore.DeviceIOControl(openFile.Handle, subcommand.FunctionCode, subcommand.Data, out output, maxOutputLength);
                if (header.Status != NTStatus.STATUS_SUCCESS)
                {
                    return(null);
                }

                response.Data = output;
                return(response);
            }
            else
            {
                // [MS-SMB] If the IsFsctl field is set to zero, the server SHOULD fail the request with STATUS_NOT_SUPPORTED
                header.Status = NTStatus.STATUS_NOT_SUPPORTED;
                return(null);
            }
        }
Exemplo n.º 17
0
        internal static List <SMB1Command> GetLockingAndXResponse(SMB1Header header, LockingAndXRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session    session  = state.GetSession(header.UID);
            OpenFileObject openFile = session.GetOpenFileObject(request.FID);

            if (openFile == null)
            {
                state.LogToServer(Severity.Verbose, "Locking failed. Invalid FID. (UID: {0}, TID: {1}, FID: {2})", header.UID, header.TID, request.FID);
                header.Status = NTStatus.STATUS_INVALID_HANDLE;
                return(new ErrorResponse(request.CommandName));
            }

            if ((request.TypeOfLock & LockType.CHANGE_LOCKTYPE) > 0)
            {
                // [MS-CIFS] Windows NT Server does not support the CHANGE_LOCKTYPE flag of TypeOfLock.
                state.LogToServer(Severity.Verbose, "Locking failed. CHANGE_LOCKTYPE is not supported.");
                header.Status = NTStatus.STATUS_NOT_IMPLEMENTED;
                return(new ErrorResponse(request.CommandName));
            }

            if (request.Unlocks.Count == 0 && request.Locks.Count == 0)
            {
                // [MS-CIFS] If NumberOfRequestedUnlocks and NumberOfRequestedLocks are both zero [..] the server MUST NOT send an SMB_COM_LOCKING_ANDX Response.
                return(new List <SMB1Command>());
            }

            // [MS-CIFS] If the CANCEL_LOCK bit is set, Windows NT servers cancel only the first lock request range listed in the lock array.
            for (int lockIndex = 0; lockIndex < request.Unlocks.Count; lockIndex++)
            {
                LockingRange lockingRange = request.Unlocks[lockIndex];
                header.Status = share.FileStore.UnlockFile(openFile.Handle, (long)lockingRange.ByteOffset, (long)lockingRange.LengthInBytes);
                if (header.Status != NTStatus.STATUS_SUCCESS)
                {
                    state.LogToServer(Severity.Verbose, "Locking: Unlocking '{0}{1}' failed. Offset: {2}, Length: {3}. NTStatus: {4}.", share.Name, openFile.Path, lockingRange.ByteOffset, lockingRange.LengthInBytes, header.Status);
                    return(new ErrorResponse(request.CommandName));
                }
                state.LogToServer(Severity.Verbose, "Locking: Unlocking '{0}{1}' succeeded. Offset: {2}, Length: {3}.", share.Name, openFile.Path, lockingRange.ByteOffset, lockingRange.LengthInBytes);
            }

            for (int lockIndex = 0; lockIndex < request.Locks.Count; lockIndex++)
            {
                LockingRange lockingRange  = request.Locks[lockIndex];
                bool         exclusiveLock = (request.TypeOfLock & LockType.SHARED_LOCK) == 0;
                header.Status = share.FileStore.LockFile(openFile.Handle, (long)lockingRange.ByteOffset, (long)lockingRange.LengthInBytes, exclusiveLock);
                if (header.Status != NTStatus.STATUS_SUCCESS)
                {
                    state.LogToServer(Severity.Verbose, "Locking: Locking '{0}{1}' failed. Offset: {2}, Length: {3}. NTStatus: {4}.", share.Name, openFile.Path, lockingRange.ByteOffset, lockingRange.LengthInBytes, header.Status);
                    // [MS-CIFS] This client request is atomic. If the area to be locked is already locked or the
                    // lock request otherwise fails, no other ranges specified in the client request are locked.
                    for (int index = 0; index < lockIndex; index++)
                    {
                        share.FileStore.UnlockFile(openFile.Handle, (long)request.Locks[index].ByteOffset, (long)request.Locks[index].LengthInBytes);
                    }
                    return(new ErrorResponse(request.CommandName));
                }
                state.LogToServer(Severity.Verbose, "Locking: Locking '{0}{1}' succeeded. Offset: {2}, Length: {3}.", share.Name, openFile.Path, lockingRange.ByteOffset, lockingRange.LengthInBytes);
            }

            return(new LockingAndXResponse());
        }
Exemplo n.º 18
0
        internal static Transaction2QueryFSInformationResponse GetSubcommandResponse(SMB1Header header, Transaction2QueryFSInformationRequest subcommand, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasReadAccess(session.SecurityContext, @"\"))
                {
                    state.LogToServer(Severity.Verbose, "QueryFileSystemInformation on '{0}' failed. User '{1}' was denied access.", share.Name, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(null);
                }
            }

            Transaction2QueryFSInformationResponse response = new Transaction2QueryFSInformationResponse();
            QueryFSInformation queryFSInformation;
            NTStatus           queryStatus = SMB1FileStoreHelper.GetFileSystemInformation(out queryFSInformation, share.FileStore, subcommand.InformationLevel);

            if (queryStatus != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "GetFileSystemInformation on '{0}' failed. Information level: {1}, NTStatus: {2}", share.Name, subcommand.InformationLevel, queryStatus);
                header.Status = queryStatus;
                return(null);
            }
            state.LogToServer(Severity.Information, "GetFileSystemInformation on '{0}' succeeded. Information level: {1}", share.Name, subcommand.InformationLevel);
            response.SetQueryFSInformation(queryFSInformation, header.UnicodeFlag);
            return(response);
        }
Exemplo n.º 19
0
        internal static SMB1Command GetTreeDisconnectResponse(SMB1Header header, TreeDisconnectRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);

            session.DisconnectTree(header.TID);
            state.LogToServer(Severity.Information, "Tree Disconnect: User '{0}' disconnected from '{1}' (UID: {2}, TID: {3})", session.UserName, share.Name, header.UID, header.TID);
            return(new TreeDisconnectResponse());
        }
Exemplo n.º 20
0
        internal static List <SMB1Command> GetCompleteNTTransactResponse(SMB1Header header, uint maxParameterCount, uint maxDataCount, NTTransactSubcommandName subcommandName, byte[] requestSetup, byte[] requestParameters, byte[] requestData, ISMBShare share, SMB1ConnectionState state)
        {
            NTTransactSubcommand subcommand;

            try
            {
                subcommand = NTTransactSubcommand.GetSubcommandRequest(subcommandName, requestSetup, requestParameters, requestData, header.UnicodeFlag);
            }
            catch
            {
                // [MS-CIFS] If the Function code is not defined, the server MUST return STATUS_INVALID_SMB.
                header.Status = NTStatus.STATUS_INVALID_SMB;
                return(new ErrorResponse(CommandName.SMB_COM_NT_TRANSACT));
            }
            state.LogToServer(Severity.Verbose, "Received complete SMB_COM_NT_TRANSACT subcommand: {0}", subcommand.SubcommandName);
            NTTransactSubcommand subcommandResponse = null;

            if (subcommand is NTTransactCreateRequest)
            {
                header.Status = NTStatus.STATUS_NOT_IMPLEMENTED;
            }
            else if (subcommand is NTTransactIOCTLRequest)
            {
                subcommandResponse = GetSubcommandResponse(header, maxDataCount, (NTTransactIOCTLRequest)subcommand, share, state);
            }
            else if (subcommand is NTTransactSetSecurityDescriptorRequest)
            {
                subcommandResponse = GetSubcommandResponse(header, (NTTransactSetSecurityDescriptorRequest)subcommand, share, state);
            }
            else if (subcommand is NTTransactNotifyChangeRequest)
            {
                NotifyChangeHelper.ProcessNTTransactNotifyChangeRequest(header, maxParameterCount, (NTTransactNotifyChangeRequest)subcommand, share, state);
                if (header.Status == NTStatus.STATUS_PENDING)
                {
                    return(new List <SMB1Command>());
                }
            }
            else if (subcommand is NTTransactQuerySecurityDescriptorRequest)
            {
                subcommandResponse = GetSubcommandResponse(header, maxDataCount, (NTTransactQuerySecurityDescriptorRequest)subcommand, share, state);
            }
            else
            {
                // [MS-CIFS] If the Function code is defined but not implemented, the server MUST return STATUS_SMB_BAD_COMMAND.
                header.Status = NTStatus.STATUS_SMB_BAD_COMMAND;
            }

            if (subcommandResponse == null)
            {
                return(new ErrorResponse(CommandName.SMB_COM_NT_TRANSACT));
            }

            byte[] responseSetup      = subcommandResponse.GetSetup();
            byte[] responseParameters = subcommandResponse.GetParameters(header.UnicodeFlag);
            byte[] responseData       = subcommandResponse.GetData();
            return(GetNTTransactResponse(responseSetup, responseParameters, responseData, state.MaxBufferSize));
        }
Exemplo n.º 21
0
        internal static SMB1Command GetSessionSetupResponse(SMB1Header header, SessionSetupAndXRequest request, GSSProvider securityProvider, SMB1ConnectionState state)
        {
            SessionSetupAndXResponse response = new SessionSetupAndXResponse();
            // The PrimaryDomain field in the request is used to determine with domain controller should authenticate the user credentials,
            // However, the domain controller itself does not use this field.
            // See: http://msdn.microsoft.com/en-us/library/windows/desktop/aa378749%28v=vs.85%29.aspx
            AuthenticateMessage message = CreateAuthenticateMessage(request.AccountName, request.OEMPassword, request.UnicodePassword);

            header.Status = securityProvider.NTLMAuthenticate(state.AuthenticationContext, message);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Information, "Session Setup: User '{0}' failed authentication (Domain: '{1}', OS: '{2}'), NTStatus: {3}", request.AccountName, request.PrimaryDomain, request.NativeOS, header.Status);
                return(new ErrorResponse(request.CommandName));
            }

            string osVersion = securityProvider.GetContextAttribute(state.AuthenticationContext, GSSAttributeName.OSVersion) as string;

            byte[]      sessionKey  = securityProvider.GetContextAttribute(state.AuthenticationContext, GSSAttributeName.SessionKey) as byte[];
            object      accessToken = securityProvider.GetContextAttribute(state.AuthenticationContext, GSSAttributeName.AccessToken);
            bool?       isGuest     = securityProvider.GetContextAttribute(state.AuthenticationContext, GSSAttributeName.IsGuest) as bool?;
            SMB1Session session;

            if (!isGuest.HasValue || !isGuest.Value)
            {
                state.LogToServer(Severity.Information, "Session Setup: User '{0}' authenticated successfully (Domain: '{1}', Workstation: '{2}', OS version: '{3}').", message.UserName, message.DomainName, message.WorkStation, osVersion);
                session = state.CreateSession(message.UserName, message.WorkStation, sessionKey, accessToken);
            }
            else
            {
                state.LogToServer(Severity.Information, "Session Setup: User '{0}' failed authentication (Domain: '{1}', Workstation: '{2}', OS version: '{3}'), logged in as guest.", message.UserName, message.DomainName, message.WorkStation, osVersion);
                session         = state.CreateSession("Guest", message.WorkStation, sessionKey, accessToken);
                response.Action = SessionSetupAction.SetupGuest;
            }

            if (session == null)
            {
                header.Status = NTStatus.STATUS_TOO_MANY_SESSIONS;
                return(new ErrorResponse(request.CommandName));
            }

            header.UID             = session.UserID;
            response.PrimaryDomain = request.PrimaryDomain;
            if ((request.Capabilities & ServerCapabilities.LargeRead) > 0)
            {
                state.LargeRead = true;
            }
            if ((request.Capabilities & ServerCapabilities.LargeWrite) > 0)
            {
                state.LargeWrite = true;
            }
            response.NativeOS     = String.Empty; // "Windows Server 2003 3790 Service Pack 2"
            response.NativeLanMan = String.Empty; // "Windows Server 2003 5.2"

            return(response);
        }
Exemplo n.º 22
0
        internal static SMB1Command GetReadResponse(SMB1Header header, ReadAndXRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session    session  = state.GetSession(header.UID);
            OpenFileObject openFile = session.GetOpenFileObject(request.FID);

            if (openFile == null)
            {
                state.LogToServer(Severity.Verbose, "Read failed. Invalid FID. (UID: {0}, TID: {1}, FID: {2})", header.UID, header.TID, request.FID);
                header.Status = NTStatus.STATUS_INVALID_HANDLE;
                return(new ErrorResponse(request.CommandName));
            }

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasReadAccess(session.SecurityContext, openFile.Path))
                {
                    state.LogToServer(Severity.Verbose, "Read from '{0}{1}' failed. User '{2}' was denied access.", share.Name, openFile.Path, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }

            uint maxCount = request.MaxCount;

            if ((share is FileSystemShare) && state.LargeRead)
            {
                maxCount = request.MaxCountLarge;
            }
            byte[] data;
            header.Status = share.FileStore.ReadFile(out data, openFile.Handle, (long)request.Offset, (int)maxCount);
            if (header.Status == NTStatus.STATUS_END_OF_FILE)
            {
                // [MS-CIFS] Windows servers set the DataLength field to 0x0000 and return STATUS_SUCCESS.
                // JCIFS expects the same response.
                data          = new byte[0];
                header.Status = NTStatus.STATUS_SUCCESS;
            }
            else if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "Read from '{0}{1}' failed. NTStatus: {2}. (FID: {3})", share.Name, openFile.Path, header.Status, request.FID);
                return(new ErrorResponse(request.CommandName));
            }

            ReadAndXResponse response = new ReadAndXResponse();

            if (share is FileSystemShare)
            {
                // If the client reads from a disk file, this field MUST be set to -1 (0xFFFF)
                response.Available = 0xFFFF;
            }
            response.Data = data;
            return(response);
        }
Exemplo n.º 23
0
        internal static Transaction2SetFileInformationResponse GetSubcommandResponse(SMB1Header header, Transaction2SetFileInformationRequest subcommand, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session    session  = state.GetSession(header.UID);
            OpenFileObject openFile = session.GetOpenFileObject(subcommand.FID);

            if (openFile == null)
            {
                header.Status = NTStatus.STATUS_INVALID_HANDLE;
                return(null);
            }

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasWriteAccess(session.SecurityContext, openFile.Path))
                {
                    state.LogToServer(Severity.Verbose, "SetFileInformation on '{0}{1}' failed. User '{2}' was denied access.", share.Name, openFile.Path, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(null);
                }
            }

            SetInformation information;

            try
            {
                information = SetInformation.GetSetInformation(subcommand.InformationBytes, subcommand.InformationLevel);
            }
            catch (UnsupportedInformationLevelException)
            {
                state.LogToServer(Severity.Verbose, "SetFileInformation on '{0}{1}' failed. Information level: {2}, NTStatus: STATUS_OS2_INVALID_LEVEL", share.Name, openFile.Path, subcommand.InformationLevel);
                header.Status = NTStatus.STATUS_OS2_INVALID_LEVEL;
                return(null);
            }
            catch (Exception)
            {
                state.LogToServer(Severity.Verbose, "SetFileInformation on '{0}{1}' failed. Information level: {2}, NTStatus: STATUS_INVALID_PARAMETER", share.Name, openFile.Path, subcommand.InformationLevel);
                header.Status = NTStatus.STATUS_INVALID_PARAMETER;
                return(null);
            }

            NTStatus status = SMB1FileStoreHelper.SetFileInformation(share.FileStore, openFile.Handle, information);

            if (status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "SetFileInformation on '{0}{1}' failed. Information level: {2}, NTStatus: {3}", share.Name, openFile.Path, subcommand.InformationLevel, status);
                header.Status = status;
                return(null);
            }
            state.LogToServer(Severity.Information, "SetFileInformation on '{0}{1}' succeeded. Information level: {2}", share.Name, openFile.Path, subcommand.InformationLevel);
            Transaction2SetFileInformationResponse response = new Transaction2SetFileInformationResponse();

            return(response);
        }
Exemplo n.º 24
0
        private void ProcessSMB1Message(SMB1Message message, ref ConnectionState state)
        {
            SMB1Header header = new SMB1Header();

            PrepareResponseHeader(header, message.Header);
            List <SMB1Command> responses = new List <SMB1Command>();

            bool isBatchedRequest = (message.Commands.Count > 1);

            foreach (SMB1Command command in message.Commands)
            {
                List <SMB1Command> commandResponses = ProcessSMB1Command(header, command, ref state);
                responses.AddRange(commandResponses);

                if (header.Status != NTStatus.STATUS_SUCCESS)
                {
                    break;
                }
            }

            if (isBatchedRequest)
            {
                if (responses.Count > 0)
                {
                    // The server MUST batch the response into an AndX Response chain.
                    SMB1Message reply = new SMB1Message();
                    reply.Header = header;
                    for (int index = 0; index < responses.Count; index++)
                    {
                        if (reply.Commands.Count == 0 ||
                            reply.Commands[reply.Commands.Count - 1] is SMBAndXCommand)
                        {
                            reply.Commands.Add(responses[index]);
                            responses.RemoveAt(index);
                            index--;
                        }
                        else
                        {
                            break;
                        }
                    }
                    EnqueueMessage(state, reply);
                }
            }

            foreach (SMB1Command response in responses)
            {
                SMB1Message reply = new SMB1Message();
                reply.Header = header;
                reply.Commands.Add(response);
                EnqueueMessage(state, reply);
            }
        }
Exemplo n.º 25
0
        internal static Transaction2SetFSInformationResponse GetSubcommandResponse(SMB1Header header, Transaction2SetFSInformationRequest subcommand, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasWriteAccess(session.SecurityContext, @"\"))
                {
                    state.LogToServer(Severity.Verbose, "SetFileSystemInformation on '{0}' failed. User '{1}' was denied access.", share.Name, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(null);
                }
            }

            if (!subcommand.IsPassthroughInformationLevel)
            {
                state.LogToServer(Severity.Verbose, "SetFileSystemInformation on '{0}' failed. Not a pass-through information level.", share.Name);
                header.Status = NTStatus.STATUS_NOT_SUPPORTED;
                return(null);
            }

            FileSystemInformation fileSystemInfo;

            try
            {
                fileSystemInfo = FileSystemInformation.GetFileSystemInformation(subcommand.InformationBytes, 0, subcommand.FileSystemInformationClass);
            }
            catch (UnsupportedInformationLevelException)
            {
                state.LogToServer(Severity.Verbose, "SetFileSystemInformation on '{0}' failed. Information class: {1}, NTStatus: STATUS_OS2_INVALID_LEVEL.", share.Name, subcommand.FileSystemInformationClass);
                header.Status = NTStatus.STATUS_OS2_INVALID_LEVEL;
                return(null);
            }
            catch (Exception)
            {
                state.LogToServer(Severity.Verbose, "SetFileSystemInformation on '{0}' failed. Information class: {1}, NTStatus: STATUS_INVALID_PARAMETER.", share.Name, subcommand.FileSystemInformationClass);
                header.Status = NTStatus.STATUS_INVALID_PARAMETER;
                return(null);
            }

            NTStatus status = share.FileStore.SetFileSystemInformation(fileSystemInfo);

            if (status != NTStatus.STATUS_SUCCESS)
            {
                state.LogToServer(Severity.Verbose, "SetFileSystemInformation on '{0}' failed. Information class: {1}, NTStatus: {2}.", share.Name, subcommand.FileSystemInformationClass, status);
                header.Status = status;
                return(null);
            }

            state.LogToServer(Severity.Verbose, "SetFileSystemInformation on '{0}' succeeded. Information class: {1}.", share.Name, subcommand.FileSystemInformationClass);
            return(new Transaction2SetFSInformationResponse());
        }
Exemplo n.º 26
0
        internal static SMB1Command GetTreeConnectResponse(SMB1Header header, TreeConnectAndXRequest request, SMB1ConnectionState state, NamedPipeShare services, SMBShareCollection shares)
        {
            SMB1Session          session    = state.GetSession(header.UID);
            bool                 isExtended = (request.Flags & TreeConnectFlags.ExtendedResponse) > 0;
            string               shareName  = ServerPathUtils.GetShareName(request.Path);
            ISMBShare            share;
            ServiceName          serviceName;
            OptionalSupportFlags supportFlags;

            if (String.Equals(shareName, NamedPipeShare.NamedPipeShareName, StringComparison.InvariantCultureIgnoreCase))
            {
                share        = services;
                serviceName  = ServiceName.NamedPipe;
                supportFlags = OptionalSupportFlags.SMB_SUPPORT_SEARCH_BITS | OptionalSupportFlags.SMB_CSC_NO_CACHING;
            }
            else
            {
                share        = shares.GetShareFromName(shareName);
                serviceName  = ServiceName.DiskShare;
                supportFlags = OptionalSupportFlags.SMB_SUPPORT_SEARCH_BITS | OptionalSupportFlags.SMB_CSC_CACHE_MANUAL_REINT;
                if (share == null)
                {
                    header.Status = NTStatus.STATUS_OBJECT_PATH_NOT_FOUND;
                    return(new ErrorResponse(request.CommandName));
                }

                if (!((FileSystemShare)share).HasReadAccess(session.SecurityContext, @"\"))
                {
                    state.LogToServer(Severity.Verbose, "Tree Connect to '{0}' failed. User '{1}' was denied access.", share.Name, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }
            ushort?treeID = session.AddConnectedTree(share);

            if (!treeID.HasValue)
            {
                header.Status = NTStatus.STATUS_INSUFF_SERVER_RESOURCES;
                return(new ErrorResponse(request.CommandName));
            }
            state.LogToServer(Severity.Information, "Tree Connect: User '{0}' connected to '{1}'", session.UserName, share.Name);
            header.TID = treeID.Value;
            if (isExtended)
            {
                return(CreateTreeConnectResponseExtended(serviceName, supportFlags));
            }
            else
            {
                return(CreateTreeConnectResponse(serviceName, supportFlags));
            }
        }
Exemplo n.º 27
0
        internal static Transaction2QueryFSInformationResponse GetSubcommandResponse(SMB1Header header, uint maxDataCount, Transaction2QueryFSInformationRequest subcommand, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session session = state.GetSession(header.UID);

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasReadAccess(session.SecurityContext, @"\"))
                {
                    state.LogToServer(Severity.Verbose, "QueryFileSystemInformation on '{0}' failed. User '{1}' was denied access.", share.Name, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(null);
                }
            }

            Transaction2QueryFSInformationResponse response = new Transaction2QueryFSInformationResponse();

            if (subcommand.IsPassthroughInformationLevel)
            {
                FileSystemInformation fileSystemInfo;
                NTStatus status = share.FileStore.GetFileSystemInformation(out fileSystemInfo, subcommand.FileSystemInformationClass);
                if (status != NTStatus.STATUS_SUCCESS)
                {
                    state.LogToServer(Severity.Verbose, "GetFileSystemInformation on '{0}' failed. Information class: {1}, NTStatus: {2}", share.Name, subcommand.FileSystemInformationClass, status);
                    header.Status = status;
                    return(null);
                }
                state.LogToServer(Severity.Information, "GetFileSystemInformation on '{0}' succeeded. Information class: {1}", share.Name, subcommand.FileSystemInformationClass);
                response.SetFileSystemInformation(fileSystemInfo);
            }
            else
            {
                QueryFSInformation queryFSInformation;
                NTStatus           status = SMB1FileStoreHelper.GetFileSystemInformation(out queryFSInformation, share.FileStore, subcommand.QueryFSInformationLevel);
                if (status != NTStatus.STATUS_SUCCESS)
                {
                    state.LogToServer(Severity.Verbose, "GetFileSystemInformation on '{0}' failed. Information level: {1}, NTStatus: {2}", share.Name, subcommand.QueryFSInformationLevel, status);
                    header.Status = status;
                    return(null);
                }
                state.LogToServer(Severity.Information, "GetFileSystemInformation on '{0}' succeeded. Information level: {1}", share.Name, subcommand.QueryFSInformationLevel);
                response.SetQueryFSInformation(queryFSInformation, header.UnicodeFlag);
            }

            if (response.InformationBytes.Length > maxDataCount)
            {
                header.Status             = NTStatus.STATUS_BUFFER_OVERFLOW;
                response.InformationBytes = ByteReader.ReadBytes(response.InformationBytes, 0, (int)maxDataCount);
            }
            return(response);
        }
Exemplo n.º 28
0
 /// <summary>
 /// May return an empty list
 /// </summary>
 private List <SMB1Command> ProcessSMB1Command(SMB1Header header, SMB1Command command, ref ConnectionState state)
 {
     if (state.Dialect == SMBDialect.NotSet)
     {
         if (command is NegotiateRequest)
         {
             NegotiateRequest request = (NegotiateRequest)command;
             if (request.Dialects.Contains(SMBServer.NTLanManagerDialect))
             {
                 state         = new SMB1ConnectionState(state);
                 state.Dialect = SMBDialect.NTLM012;
                 m_connectionManager.AddConnection(state);
                 if (EnableExtendedSecurity && header.ExtendedSecurityFlag)
                 {
                     return(NegotiateHelper.GetNegotiateResponseExtended(request, m_serverGuid));
                 }
                 else
                 {
                     return(NegotiateHelper.GetNegotiateResponse(header, request, m_securityProvider, state));
                 }
             }
             else
             {
                 return(new NegotiateResponseNotSupported());
             }
         }
         else
         {
             // [MS-CIFS] An SMB_COM_NEGOTIATE exchange MUST be completed before any other SMB messages are sent to the server
             header.Status = NTStatus.STATUS_INVALID_SMB;
             return(new ErrorResponse(command.CommandName));
         }
     }
     else if (command is NegotiateRequest)
     {
         // There MUST be only one SMB_COM_NEGOTIATE exchange per SMB connection.
         // Subsequent SMB_COM_NEGOTIATE requests received by the server MUST be rejected with error responses.
         header.Status = NTStatus.STATUS_INVALID_SMB;
         return(new ErrorResponse(command.CommandName));
     }
     else
     {
         return(ProcessSMB1Command(header, command, (SMB1ConnectionState)state));
     }
 }
Exemplo n.º 29
0
        internal static SMB1Command GetReadResponse(SMB1Header header, ReadAndXRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session    session  = state.GetSession(header.UID);
            OpenFileObject openFile = session.GetOpenFileObject(request.FID);

            if (openFile == null)
            {
                header.Status = NTStatus.STATUS_INVALID_HANDLE;
                return(null);
            }

            if (share is FileSystemShare)
            {
                if (!((FileSystemShare)share).HasReadAccess(session.SecurityContext, openFile.Path))
                {
                    state.LogToServer(Severity.Verbose, "ReadAndX from '{0}{1}' failed. User '{2}' was denied access.", share.Name, openFile.Path, session.UserName);
                    header.Status = NTStatus.STATUS_ACCESS_DENIED;
                    return(new ErrorResponse(request.CommandName));
                }
            }

            uint maxCount = request.MaxCount;

            if ((share is FileSystemShare) && state.LargeRead)
            {
                maxCount = request.MaxCountLarge;
            }
            byte[] data;
            header.Status = share.FileStore.ReadFile(out data, openFile.Handle, (long)request.Offset, (int)maxCount);
            if (header.Status != NTStatus.STATUS_SUCCESS)
            {
                return(new ErrorResponse(request.CommandName));
            }

            ReadAndXResponse response = new ReadAndXResponse();

            if (share is FileSystemShare)
            {
                // If the client reads from a disk file, this field MUST be set to -1 (0xFFFF)
                response.Available = 0xFFFF;
            }
            response.Data = data;
            return(response);
        }
Exemplo n.º 30
0
        internal static void ProcessNTCancelRequest(SMB1Header header, NTCancelRequest request, ISMBShare share, SMB1ConnectionState state)
        {
            SMB1Session      session = state.GetSession(header.UID);
            SMB1AsyncContext context = state.GetAsyncContext(header.UID, header.TID, header.PID, header.MID);

            if (context != null)
            {
                NTStatus       status   = share.FileStore.Cancel(context.IORequest);
                OpenFileObject openFile = session.GetOpenFileObject(context.FileID);
                if (openFile != null)
                {
                    state.LogToServer(Severity.Information, "Cancel: Requested cancel on '{0}{1}', NTStatus: {2}. PID: {3}. MID: {4}.", share.Name, openFile.Path, status, context.PID, context.MID);
                }
                if (status == NTStatus.STATUS_SUCCESS || status == NTStatus.STATUS_CANCELLED)
                {
                    state.RemoveAsyncContext(context);
                }
            }
        }