public static bool Recognization(RoofBase roof)
{
Level level = (Level)_doc.GetElement(roof.get_Parameter(BuiltInParameter.ROOF_BASE_LEVEL_PARAM).AsElementId());
double offset = roof.get_Parameter(BuiltInParameter.ROOF_LEVEL_OFFSET_PARAM).AsDouble();
bool isFound;
_floor = _myLevel.GetFloor(out isFound, level, offset);
--_floor;
if (MyLevel.GetLevelNum() - 2 < _floor || _floor < 0)
{
_abandonWriter.WriteAbandonment(roof, AbandonmentTable.LevelNotFound);
return(false);
}
CompoundStructure cs = roof.RoofType.GetCompoundStructure();
try
{
IList <CompoundStructureLayer> layers = cs.GetLayers();
Material matl = (Material)_doc.GetElement(layers.First().MaterialId);
if (matl.MaterialCategory == _addiInfo.materialTypes[(byte)PGMaterialType.ConcreteTile])
{
_matlIndex = 1;
}
else if (matl.MaterialCategory == _addiInfo.materialTypes[(byte)PGMaterialType.ClayTile])
{
_matlIndex = 2;
}
else
{
_abandonWriter.WriteAbandonment(roof, AbandonmentTable.Roof_MatlOOR);
return(false);
}
}
catch
{
_abandonWriter.WriteAbandonment(roof, AbandonmentTable.Roof_MatlOOR);
return(false);
}
_area = roof.get_Parameter(BuiltInParameter.HOST_AREA_COMPUTED).AsDouble();
return(true);
}
public static HostObject ToRevit(this Panel panel, Document document, Core.Revit.ConvertSettings convertSettings)
{
Geometry.Spatial.Face3D face3D = panel?.GetFace3D();
if (face3D == null)
{
return(null);
}
HostObject result = convertSettings?.GetObject <HostObject>(panel.Guid);
if (result != null)
{
return(result);
}
PanelType panelType = panel.PanelType;
Geometry.Spatial.Vector3D normal = panel.Normal;
HostObjAttributes hostObjAttributes = panel.Construction.ToRevit(document, panelType, normal, convertSettings);
if (hostObjAttributes == null)
{
hostObjAttributes = Analytical.Query.DefaultConstruction(panelType)?.ToRevit(document, panelType, normal, convertSettings); //Default Construction
}
BuiltInParameter[] builtInParameters = null;
if (hostObjAttributes is Autodesk.Revit.DB.WallType)
{
double lowElevation = panel.LowElevation();
Level level = document.LowLevel(lowElevation);
Autodesk.Revit.DB.Wall wall = ToRevit_Wall(face3D, document, (Autodesk.Revit.DB.WallType)hostObjAttributes, level);
if (wall == null)
{
return(result);
}
//List<Curve> curveList = new List<Curve>();
//foreach (Geometry.Spatial.IClosedPlanar3D closedPlanar3D in face3D.GetEdge3Ds())
//{
// if (Geometry.Spatial.Query.Clockwise(closedPlanar3D))
// closedPlanar3D.Reverse();
// List<Line> lines = closedPlanar3D.ToRevit();
// if (lines == null)
// continue;
// curveList.AddRange(lines);
//}
//if (curveList == null || curveList.Count == 0)
// return null;
//double lowElevation = panel.LowElevation();
//Level level = document.LowLevel(lowElevation);
//if (level == null)
// return null;
//Wall wall = Wall.Create(document, curveList, hostObjAttributes.Id, level.Id, false, panel.Normal.ToRevit(false));
Parameter parameter = null;
parameter = wall.get_Parameter(BuiltInParameter.WALL_HEIGHT_TYPE);
if (parameter != null)
{
parameter.Set(ElementId.InvalidElementId);
}
parameter = wall.get_Parameter(BuiltInParameter.WALL_USER_HEIGHT_PARAM);
if (parameter != null)
{
#if Revit2017 || Revit2018 || Revit2019 || Revit2020
double height = UnitUtils.ConvertToInternalUnits((panel.HighElevation() - lowElevation), DisplayUnitType.DUT_METERS);
#else
double height = UnitUtils.ConvertToInternalUnits((panel.HighElevation() - lowElevation), UnitTypeId.Meters);
#endif
parameter.Set(height);
}
#if Revit2017 || Revit2018 || Revit2019 || Revit2020
double levelElevation = UnitUtils.ConvertFromInternalUnits(level.Elevation, DisplayUnitType.DUT_METERS);
#else
double levelElevation = UnitUtils.ConvertFromInternalUnits(level.Elevation, UnitTypeId.Meters);
#endif
if (Math.Abs(lowElevation - levelElevation) > Core.Tolerance.MacroDistance)
{
parameter = wall.get_Parameter(BuiltInParameter.WALL_BASE_OFFSET);
if (parameter != null)
{
#if Revit2017 || Revit2018 || Revit2019 || Revit2020
parameter.Set(UnitUtils.ConvertToInternalUnits(lowElevation - levelElevation, DisplayUnitType.DUT_METERS));
#else
parameter.Set(UnitUtils.ConvertToInternalUnits(lowElevation - levelElevation, UnitTypeId.Meters));
#endif
}
}
builtInParameters = new BuiltInParameter[] { BuiltInParameter.WALL_BASE_CONSTRAINT, BuiltInParameter.WALL_BASE_OFFSET, BuiltInParameter.WALL_HEIGHT_TYPE, BuiltInParameter.WALL_USER_HEIGHT_PARAM, BuiltInParameter.WALL_KEY_REF_PARAM };
result = wall;
}
else if (hostObjAttributes is Autodesk.Revit.DB.FloorType)
{
Geometry.Spatial.IClosedPlanar3D closedPlanar3D_External = face3D.GetExternalEdge3D();
if (!(closedPlanar3D_External is Geometry.Spatial.ICurvable3D))
{
return(null);
}
double elevation = panel.LowElevation();
Level level = document.HighLevel(elevation);
Geometry.Spatial.Plane plane = new Geometry.Spatial.Plane(new Geometry.Spatial.Point3D(0, 0, elevation), Geometry.Spatial.Vector3D.WorldZ);
CurveArray curveArray_Sloped = new CurveArray();
CurveArray curveArray_Plane = new CurveArray();
Geometry.Spatial.IClosedPlanar3D closedPlanar3D = face3D.GetExternalEdge3D();
if (!(closedPlanar3D is Geometry.Spatial.ICurvable3D))
{
return(null);
}
List <Geometry.Spatial.Segment3D> segment3Ds = Geometry.Revit.Query.Segment3Ds(closedPlanar3D);
if (segment3Ds == null || segment3Ds.Count == 0)
{
return(null);
}
foreach (Geometry.Spatial.Segment3D segment3D in segment3Ds)
{
curveArray_Sloped.Append(segment3D.ToRevit_Line());
Geometry.Spatial.Segment3D segment3D_Temp = Geometry.Spatial.Query.Project(plane, segment3D);
if (segment3D_Temp == null)
{
continue;
}
curveArray_Plane.Append(segment3D_Temp.ToRevit_Line());
}
#if Revit2017 || Revit2018 || Revit2019 || Revit2020 || Revit2021
Autodesk.Revit.DB.Floor floor = document.Create.NewFloor(curveArray_Plane, hostObjAttributes as Autodesk.Revit.DB.FloorType, level, false);
#else
CurveLoop curveLoop = new CurveLoop();
foreach (Curve curve in curveArray_Plane)
{
curveLoop.Append(curve);
}
Autodesk.Revit.DB.Floor floor = Autodesk.Revit.DB.Floor.Create(document, new CurveLoop[] { curveLoop }, hostObjAttributes.Id, level.Id);
#endif
if (floor != null)
{
floor.ChangeTypeId(hostObjAttributes.Id);
List <Geometry.Spatial.IClosedPlanar3D> closedPlanar3Ds_Internal = face3D.GetInternalEdge3Ds();
if (closedPlanar3Ds_Internal != null && closedPlanar3Ds_Internal.Count > 0)
{
//Requires to be regenerated before inserting openings
//https://thebuildingcoder.typepad.com/blog/2013/07/create-a-floor-with-an-opening-or-complex-boundary.html
document.Regenerate();
foreach (Geometry.Spatial.IClosedPlanar3D closedPlanar3D_Internal in face3D.GetInternalEdge3Ds())
{
List <Geometry.Spatial.Segment3D> segment3Ds_Internal = Geometry.Revit.Query.Segment3Ds(closedPlanar3D_Internal);
if (segment3Ds_Internal == null || segment3Ds_Internal.Count == 0)
{
continue;
}
curveArray_Plane = new CurveArray();
//foreach (Geometry.Spatial.Segment3D segment3D in segment3Ds)
foreach (Geometry.Spatial.Segment3D segment3D in segment3Ds_Internal)
{
curveArray_Sloped.Append(segment3D.ToRevit_Line());
Geometry.Spatial.Segment3D segment3D_Temp = Geometry.Spatial.Query.Project(plane, segment3D);
if (segment3D_Temp == null)
{
continue;
}
curveArray_Plane.Append(segment3D_Temp.ToRevit_Line());
}
Opening opening = document.Create.NewOpening(floor, curveArray_Plane, true);
}
}
}
if (floor != null)
{
document.Regenerate();
SlabShapeEditor slabShapeEditor = floor.SlabShapeEditor;
if (slabShapeEditor != null)
{
slabShapeEditor.ResetSlabShape();
foreach (Curve curve in curveArray_Sloped)
{
XYZ xYZ = curve.GetEndPoint(0);
slabShapeEditor.DrawPoint(xYZ);
}
}
}
builtInParameters = new BuiltInParameter[] { BuiltInParameter.LEVEL_PARAM };
result = floor;
}
else if (hostObjAttributes is Autodesk.Revit.DB.RoofType)
{
CurveArray curveArray = new CurveArray();
foreach (Geometry.Spatial.IClosedPlanar3D closedPlanar3D in face3D.GetEdge3Ds())
{
List <Geometry.Spatial.Segment3D> segment3Ds = Geometry.Revit.Query.Segment3Ds(closedPlanar3D);
if (segment3Ds == null || segment3Ds.Count == 0)
{
return(null);
}
segment3Ds.ForEach(x => curveArray.Append(x.ToRevit_Line()));
}
Level level = document.HighLevel(panel.LowElevation());
double levelElevation = level.Elevation;
ModelCurveArray modelCurveArray = new ModelCurveArray();
RoofBase roofBase = document.Create.NewFootPrintRoof(curveArray, level, hostObjAttributes as Autodesk.Revit.DB.RoofType, out modelCurveArray);
Parameter parameter = roofBase.get_Parameter(BuiltInParameter.ROOF_UPTO_LEVEL_PARAM);
if (parameter != null)
{
parameter.Set(ElementId.InvalidElementId);
}
SlabShapeEditor slabShapeEditor = roofBase.SlabShapeEditor;
if (slabShapeEditor != null)
{
slabShapeEditor.ResetSlabShape();
foreach (Curve curve in curveArray)
{
XYZ xYZ = curve.GetEndPoint(0);
//if (Math.Abs(xYZ.Z - levelElevation) > Core.Tolerance.MicroDistance)
slabShapeEditor.DrawPoint(xYZ);
}
}
builtInParameters = new BuiltInParameter[] { BuiltInParameter.ROOF_LEVEL_OFFSET_PARAM, BuiltInParameter.ROOF_BASE_LEVEL_PARAM, BuiltInParameter.ROOF_UPTO_LEVEL_PARAM };
result = roofBase;
}
if (result == null)
{
return(null);
}
List <Aperture> apertures = panel.Apertures;
if (apertures != null)
{
if (result is Autodesk.Revit.DB.Wall && ((Autodesk.Revit.DB.Wall)result).WallType.Kind == WallKind.Curtain)
{
}
else
{
foreach (Aperture aperture in apertures)
{
Geometry.Spatial.Plane plane_Aperture = aperture?.PlanarBoundary3D?.Plane;
if (plane_Aperture == null)
{
continue;
}
//bool flipHand = !plane_Panel.AxisX.SameHalf(plane_Aperture.AxisX);
//bool flipFacing = !plane_Panel.Normal.SameHalf(plane_Aperture.Normal);
FamilyInstance failyInstance_Aperture = aperture.ToRevit(document, result, convertSettings);
}
}
}
if (convertSettings.ConvertParameters)
{
Core.Revit.Modify.SetValues(result, panel, builtInParameters);
Core.Revit.Modify.SetValues(result, panel, ActiveSetting.Setting);
Core.Revit.Modify.SetJson(result, panel.ToJObject()?.ToString());
}
//TODO: Implement proper log
//System.IO.File.AppendAllText(@"C:\Users\DengusiakM\Desktop\SAM\2020-04-16 floorbug\LOG.txt", string.Format("{0}\t{1}\t{2}\n", DateTime.Now.ToString(), panel.Guid, panel.Name));
convertSettings?.Add(panel.Guid, result);
return(result);
}
/***************************************************/
/**** Public methods ****/
/***************************************************/
public static RoofBase ToRevitRoofBase(this oM.Physical.Elements.Roof roof, Document document, RevitSettings settings = null, Dictionary <Guid, List <int> > refObjects = null)
{
if (roof == null || roof.Location == null || document == null)
{
return(null);
}
PlanarSurface planarSurface = roof.Location as PlanarSurface;
if (planarSurface == null)
{
return(null);
}
RoofBase roofBase = refObjects.GetValue <RoofBase>(document, roof.BHoM_Guid);
if (roofBase != null)
{
return(roofBase);
}
settings = settings.DefaultIfNull();
RoofType roofType = roof.Construction?.ToRevitElementType(document, new List <BuiltInCategory> {
BuiltInCategory.OST_Roofs
}, settings, refObjects) as RoofType;
if (roofType == null)
{
roofType = roof.ElementType(document, settings);
}
if (roofType == null)
{
Compute.ElementTypeNotFoundWarning(roof);
return(null);
}
Level level = document.LevelBelow(roof.Location, settings);
if (level == null)
{
return(null);
}
double elevation = level.Elevation.ToSI(UnitType.UT_Length);
oM.Geometry.Plane plane = BH.Engine.Geometry.Create.Plane(BH.Engine.Geometry.Create.Point(0, 0, elevation), BH.Engine.Geometry.Create.Vector(0, 0, 1));
ICurve curve = planarSurface.ExternalBoundary.IProject(plane);
CurveArray curveArray = Create.CurveArray(curve.IToRevitCurves());
ModelCurveArray modelCurveArray = new ModelCurveArray();
roofBase = document.Create.NewFootPrintRoof(curveArray, level, roofType, out modelCurveArray);
if (roofBase != null)
{
Parameter parameter = roofBase.get_Parameter(BuiltInParameter.ROOF_UPTO_LEVEL_PARAM);
if (parameter != null)
{
parameter.Set(ElementId.InvalidElementId);
}
List <oM.Geometry.Point> controlPoints = planarSurface.ExternalBoundary.IControlPoints();
if (controlPoints != null && controlPoints.Count > 2)
{
SlabShapeEditor slabShapeEditor = roofBase.SlabShapeEditor;
slabShapeEditor.ResetSlabShape();
foreach (oM.Geometry.Point point in controlPoints)
{
if (Math.Abs(point.Z - plane.Origin.Z) > settings.DistanceTolerance)
{
XYZ xyz = point.ToRevit();
slabShapeEditor.DrawPoint(xyz);
}
}
}
}
roofBase.CheckIfNullPush(roof);
if (roofBase == null)
{
return(null);
}
// Copy parameters from BHoM object to Revit element
roofBase.CopyParameters(roof, settings);
// Update the offset in case the level had been overwritten.
double offset = 0;
if (roofBase.LevelId.IntegerValue != level.Id.IntegerValue)
{
Level newLevel = document.GetElement(roofBase.LevelId) as Level;
offset += (level.ProjectElevation - newLevel.ProjectElevation).ToSI(UnitType.UT_Length);
}
roofBase.SetParameter(BuiltInParameter.ROOF_LEVEL_OFFSET_PARAM, offset);
refObjects.AddOrReplace(roof, roofBase);
return(roofBase);
}
