public void EvalGawk(RCRunner runner, RCClosure closure, RCSymbol symbol, RCLong right)
{
int limit = (int)right[0];
lock (_readWriteLock)
{
Section s = GetSection(symbol);
ReadSpec spec = s._counter.GetReadSpec(symbol, limit, false, true);
Satisfy canSatisfy = s._counter.CanSatisfy(spec);
RCCube result = s._blackboard.Read(spec, s._counter, true, s._blackboard.Count);
if ((spec.SymbolUnlimited && result.Count > 0) ||
(!spec.SymbolUnlimited && result.Count >= symbol.Count * Math.Abs(spec.SymbolLimit)))
{
if (canSatisfy != Satisfy.Yes)
{
throw new Exception();
}
runner.Yield(closure, result);
}
else
{
if (canSatisfy != Satisfy.No)
{
throw new Exception();
}
s._dispatchWaiters.Enqueue(symbol, closure);
}
}
}
public void EvalPage(RCRunner runner, RCClosure closure, RCSymbol symbol, RCLong right)
{
int pageNumber = 0;
if (right.Count > 0)
{
pageNumber = (int)right[0];
}
int pageSize = int.MaxValue;
if (right.Count > 1)
{
pageSize = (int)right[1];
}
// Page lets you access the blackboard by page number and page size, rather than row
// numbers.
// Good for building tools for looking at blackboard contents.
lock (_readWriteLock)
{
Section s = GetSection(symbol);
int skipFirst = pageNumber * pageSize;
int stopAfter = pageSize;
ReadSpec spec = new ReadSpec(s._counter, symbol, skipFirst, stopAfter, false);
RCCube result = s._blackboard.Read(spec, s._counter, true, s._blackboard.Count);
runner.Yield(closure, result);
}
}
public void EvalPeek(RCRunner runner, RCClosure closure, RCSymbol left, RCLong right)
{
int limit = (int)right[0];
lock (_readWriteLock)
{
Section s = GetSection(left);
ReadSpec spec = s._counter.GetReadSpec(left, limit, false, true);
Satisfy canSatisfy = s._counter.CanSatisfy(spec);
RCCube result = s._blackboard.Read(spec, s._counter, true, s._blackboard.Count);
if ((spec.SymbolUnlimited && result.Count > 0) ||
(!spec.SymbolUnlimited && result.Count >= left.Count * Math.Abs(spec.SymbolLimit)))
{
// If dispatch would yield, return lines.
if (canSatisfy != Satisfy.Yes)
{
throw new Exception();
}
runner.Yield(closure, RCBoolean.True);
}
else
{
if (canSatisfy != Satisfy.No)
{
throw new Exception();
}
runner.Yield(closure, RCBoolean.False);
}
}
}
public void EvalSelect(RCRunner runner, RCClosure closure, RCSymbol left, RCCube right)
{
RCLong args = new RCLong(0, 0);
ReadCounter counter = new ReadCounter(right);
ReadSpec spec = new ReadSpec(counter, left, args, 0, false, false, true, false);
RCCube result = right.Read(spec, counter, true, right.Count);
runner.Yield(closure, result);
}
public void Read(RCRunner runner, RCClosure closure, RCSymbol symbol, ReadSpec spec)
{
lock (_readWriteLock)
{
// Make abstract symbols concrete
Section section = GetSection(symbol);
Satisfy canSatisfy = section._counter.CanSatisfy(spec);
RCCube result = section._blackboard.Read(spec,
section._counter,
true,
section._blackboard.Count);
if (spec.SymbolUnlimited)
{
if (result.Count > 0)
{
// Notice the canSatisfy constraints here are less strict.
// If the start point is greater than zero then we have to
// do the full read and then just see if there were enough
// rows to satisfy the constraints.
if (canSatisfy == Satisfy.No)
{
throw new Exception();
}
runner.Yield(closure, result);
}
else
{
if (canSatisfy == Satisfy.Yes)
{
throw new Exception();
}
section._readWaiters.Enqueue(symbol, closure);
}
}
else
{
if (result.Count >= symbol.Count * Math.Abs(spec.SymbolLimit))
{
if (canSatisfy == Satisfy.No)
{
throw new Exception();
}
runner.Yield(closure, result);
}
else
{
if (canSatisfy == Satisfy.Yes)
{
throw new Exception();
}
section._readWaiters.Enqueue(symbol, closure);
}
}
}
}
public void EvalPoll(RCRunner runner, RCClosure closure, RCSymbol symbol, RCLong starts)
{
// Poll is like read but it will never block.
lock (_readWriteLock)
{
Section s = GetSection(symbol);
ReadSpec spec = s._counter.GetReadSpec(symbol, starts, false, true);
RCCube result = s._blackboard.Read(spec, s._counter, true, s._blackboard.Count);
runner.Yield(closure, result);
}
}
public void EvalSnap(RCRunner runner, RCClosure closure, RCSymbol left, RCLong right)
{
// With snap, the read instructions apply to each symbol in a family of symbols.
// Not only to the symbol explcitly noted in the left argument.
lock (_readWriteLock)
{
Section s = GetSection(left);
// This line with the ConcreteSymbols should be added to other operators
// RCSymbol concretes = s._counter.ConcreteSymbols (left, false);
ReadSpec spec = new ReadSpec(s._counter, left, right, -1, false, false, true, false);
// RCCube result = s._blackboard.Read (spec, s._counter, true,
// s._blackboard.Count);
RCCube result = s._blackboard.Read(spec, s._counter, true, s._blackboard.Count);
runner.Yield(closure, result);
}
}
public void EvalThrottle(RCRunner runner, RCClosure closure, RCSymbol symbol, RCLong right)
{
int limit = (int)right[0];
lock (_readWriteLock)
{
Section s = GetSection(symbol);
ReadSpec spec = s._counter.GetReadSpec(symbol, limit, false, true);
Satisfy canSatisfy = s._counter.CanSatisfy(spec);
RCCube result = s._blackboard.Read(spec,
s._counter,
true,
s._blackboard.Count);
if ((spec.SymbolUnlimited && result.Count > 0) ||
(!spec.SymbolUnlimited && result.Count >= symbol.Count * Math.Abs(spec.SymbolLimit)))
{
// If dispatch would yield, suspend.
if (canSatisfy != Satisfy.Yes)
{
throw new Exception();
}
s._throttleWaiters.Enqueue(symbol, closure);
}
else
{
// Return the count of the result set for now.
// wny not just return the whole thing?
// Because I want to write a version of this that can
// know, in near constant time whether dispatch would yield,
// without actually producing a result set.
// That method can be used by dispatch, peek, and throttle.
// So keep the interface locked down.
if (canSatisfy != Satisfy.No)
{
throw new Exception();
}
runner.Yield(closure, new RCLong(result.Lines));
}
}
}
public void EvalDispatch(RCRunner runner, RCClosure closure, RCSymbol symbol, RCLong right)
{
int limit = (int)right[0];
lock (_readWriteLock)
{
Section s = GetSection(symbol);
ReadSpec spec = s._counter.GetReadSpec(symbol, limit, false, true);
Satisfy canSatisfy = s._counter.CanSatisfy(spec);
RCCube result = s._blackboard.Read(spec,
s._counter,
true,
s._blackboard.Count);
if ((spec.SymbolUnlimited && result.Count > 0) ||
(!spec.SymbolUnlimited && result.Count >= symbol.Count * Math.Abs(spec.SymbolLimit)))
{
if (canSatisfy != Satisfy.Yes)
{
throw new Exception();
}
s._counter.Dispatch(s._blackboard, result.AcceptedLines);
runner.Yield(closure, result);
Dictionary <long, RCClosure> throttlers = null;
s._throttleWaiters.GetReadersForSymbol(ref throttlers,
result.AcceptedSymbols);
ContinueWaiters(runner, throttlers);
}
else
{
if (canSatisfy != Satisfy.No)
{
throw new Exception();
}
s._dispatchWaiters.Enqueue(symbol, closure);
}
}
}
