private void button1_Generate_Click(object sender, EventArgs e)
{
if (textBox_SealSpan.Text == "")
{
textBox_SealSpan.Text = "0";
}
//RailwayVehicleModel实例化需要配置5个参数
//70还是60吨车型、生产日期、上次厂修时间、上次段修时间、封存时间
RailwayVehicleModel vehicleModel = new RailwayVehicleModel();
//配置vehicleModel参数 5项
//强制转换，别搞那么复杂
vehicleModel.GenTpSelection = listBox1.SelectedIndex;
vehicleModel.produceDate = dateTimePicker1_Produce.Value.Date;
vehicleModel.previousDepotDate = dateTimePicker1_Dep.Value.Date;
vehicleModel.previousFactoryDate = dateTimePicker2_Fac.Value.Date;
vehicleModel.SealDuration = Convert.ToInt32(textBox_SealSpan.Text);
//需要设置int GenTp, DateTime pre_depDate, DateTime pre_facDate, DateTime produceDate, int SealSpan
RailwayVehicleModel vResult = VehicleData.ReDateProcessKernel(vehicleModel);
if (vResult == null)
{
MessageBox.Show("vResult为null,检查计算Kernel");
return;
}
textBox_NextDep.Text = vResult.vNextDepotDate.ToLongDateString();
textBox1_CurrentTime.Text = vResult.currentDepotDate.ToLongDateString();
textBox_NextFac.Text = vResult.nextFactoryDate.ToLongDateString();
label9.Text = "修程进度：" + vResult.n.ToString();
//进度条显示
ProgressBarScaleDisplay(vResult.GenType, vResult.n);
textBox1_DBG.Text = vResult.warningInfo;
//Dbg("Log:" + DateTime.Now.ToString() + "\r\n" + vResult.nextFactoryDate.ToString());
}
/// <summary>
/// 处理不参加修程修制改革的车型
/// </summary>
/// <param name="vehicle"></param>
/// <returns></returns>
public static RailwayVehicleModel NonDateProcessKernel(RailwayVehicleModel vehicle)
{
vehicle.warningInfo = "暂不处理非修程修制改革车型";
return(vehicle);
}
/// <summary>
/// 修程修制改革车型计算核心
/// </summary>
/// <param name="vehicle"></param>
/// <returns></returns>
public static RailwayVehicleModel ReDateProcessKernel(RailwayVehicleModel vehicle)
{
//需要设置int GenTp,
//DateTime pre_depDate,
//DateTime pre_facDate,
//DateTime produceDate,
//int SealSpan
//计算上次段修距离上次厂修的时间差
//Gate用来储存时间差
int Gate_year = vehicle.previousDepotDate.Year - vehicle.previousFactoryDate.Year;
int Gate_month = vehicle.previousDepotDate.Month - vehicle.previousFactoryDate.Month;
decimal Gate_sum = Gate_year * 12 + Gate_month;
//70t通用
if (vehicle.GenTpSelection == 0)
{
//此时开始判断是否需要加强段修。开始分类,判断特殊情况。
int predictFacDate = vehicle.previousFactoryDate.AddMonths(vehicle.SealDuration).Year + 8;
if ((predictFacDate == 2020 || predictFacDate == 2021) && ((vehicle.previousFactoryDate.Year - vehicle.produceDate.Year) < 2))
{
//GenTp = 2;//70t的特殊情况，需要加强段修.但后面不再需要GenTp此参数，由描述车型更精确的vehicle.GenType替代
vehicle.GenType = RailwayVehicleModel.vehicleGenType.Spc70t;
vehicle.warningInfo += "\r\n70t特殊类型";
}
else
{
vehicle.GenType = RailwayVehicleModel.vehicleGenType.Gen70t;
vehicle.warningInfo += "\r\n70t通用类型";
}
//段修修程为24个月 n为第几次段修
int n = (int)Math.Round(Convert.ToDouble(Gate_sum / 24), MidpointRounding.AwayFromZero);//四舍五入为了减少误差
//判断是否修正过
if (vehicle.previousDepotDate.Date != vehicle.previousFactoryDate.AddMonths(n * 24).Date)
{
vehicle.warningInfo = "\r\n前次段修数据经过修正,之前:" + vehicle.previousDepotDate + ";\r\n修正后：" + vehicle.previousFactoryDate.AddMonths(n * 24);
}
vehicle.previousDepotDate = vehicle.previousFactoryDate.AddMonths(n * 24);
switch (vehicle.GenType)
{
case RailwayVehicleModel.vehicleGenType.Gen70t:
//计算增加修程
//将前n次的24个月+剩下的4-n次的27个月加入到上次厂修 即可求出下次厂修时间
vehicle.nextFactoryDate = vehicle.previousFactoryDate.AddMonths((4 - n) * 27 + n * 24).AddMonths(vehicle.SealDuration);
//拿修正后的段修时间+封存期，判断第n次段修是否在2020-2021修程修制改革时间内
DateTime sealEndTime = vehicle.previousDepotDate.AddMonths(vehicle.SealDuration);
if (sealEndTime.Year == 2020 || sealEndTime.Year == 2021)
{
//在2020-2011期间，则先加两年再加3个月，得到下一次厂修日期
vehicle.currentDepotDate = sealEndTime.AddMonths(24).AddMonths(3); //vehicle.previousDepotDate.AddMonths(vehicle.SealDuration);
vehicle.nextFactoryDate = vehicle.nextFactoryDate.AddMonths(3);
vehicle.vNextDepotDate = vehicle.currentDepotDate.AddMonths(27);
}
else
{
//如果不在2020-2011，则按照正常算
//前面的FactoryDate不用算了
vehicle.currentDepotDate = sealEndTime.AddMonths(27);
vehicle.vNextDepotDate = vehicle.currentDepotDate.AddMonths(27);
}
vehicle.n = n;
break;
case RailwayVehicleModel.vehicleGenType.Spc70t:
//首先判断n是否为3，保险起见
if (n == 3)
{
//第一次做加强段修，不增加修程
//本次为加强段修，下次做厂修
vehicle.nextFactoryDate = vehicle.previousFactoryDate.AddMonths(24 * 5).AddMonths(vehicle.SealDuration);
vehicle.enhanceDepotDate = vehicle.previousFactoryDate.AddYears(8).AddMonths(vehicle.SealDuration);
vehicle.currentDepotDate = vehicle.enhanceDepotDate;
vehicle.vNextDepotDate = vehicle.currentDepotDate.AddMonths(24);
vehicle.n = n;
}
else
{
vehicle = null;
}
break;
default:
vehicle = null;
break;
}
}
//60t通用
else if (vehicle.GenTpSelection == 1)
{
vehicle.GenType = RailwayVehicleModel.vehicleGenType.Gen60t;
//段修修程为18个月 n为第几次段修
int n = (int)Math.Round(Convert.ToDouble(Gate_sum / 18), MidpointRounding.AwayFromZero);//四舍五入为了减少误差
//计算增加修程
//将前n次的18个月+剩下的6-n次的20个月加入到上次厂修 即可求出下次厂修时间
vehicle.nextFactoryDate = vehicle.previousFactoryDate.AddMonths((6 - n) * 20 + n * 18).AddMonths(vehicle.SealDuration);
//修正上次段修时间
if (vehicle.previousDepotDate.Date != vehicle.previousFactoryDate.AddMonths(n * 18).Date)
{
vehicle.warningInfo = "\r\n前次段修数据经过修正,之前:" + vehicle.previousDepotDate + ";\r\n修正后：" + vehicle.previousFactoryDate.AddMonths(n * 18);
}
vehicle.previousDepotDate = vehicle.previousFactoryDate.AddMonths(n * 18);
//密封期
DateTime sealEndTime = vehicle.previousDepotDate.AddMonths(vehicle.SealDuration);
if (sealEndTime.Year == 2020 || sealEndTime.Year == 2021)
{
//在2020-2011期间，则先加两年再加3个月，得到下一次厂修日期
vehicle.currentDepotDate = sealEndTime.AddMonths(18).AddMonths(2);
vehicle.nextFactoryDate = vehicle.nextFactoryDate.AddMonths(2).AddMonths(vehicle.SealDuration);
vehicle.vNextDepotDate = vehicle.currentDepotDate.AddMonths(20);
}
else
{
//如果不在2020-2011，则按照正常算
vehicle.currentDepotDate = vehicle.previousDepotDate.AddMonths(20).AddMonths(vehicle.SealDuration);
vehicle.vNextDepotDate = vehicle.currentDepotDate.AddMonths(20);
}
vehicle.n = n;
vehicle.warningInfo += "\r\n60t通用类型";
}
else//其他车就不用改修程
{
//其他车都是60t的车都是水泥罐之类的，1.5年修一次，5个段修，9年做一次厂修
//其他车暂时不写
vehicle = null;
}
return(vehicle);
}
