public virtual int DoUpgradeProject_CheckOnly(string projectFileName, IVsUpgradeLogger upgradeLogger, out __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS upgradeRequired, out Guid newProjectFactory, out uint upgradeCapabilityFlags)
{
newProjectFactory = GetType().GUID;
var project = ProjectRootElement.Open(projectFileName);
// enable Side-by-Side and CopyBackup support
upgradeCapabilityFlags = (uint)(__VSPPROJECTUPGRADEVIAFACTORYFLAGS.PUVFF_BACKUPSUPPORTED | __VSPPROJECTUPGRADEVIAFACTORYFLAGS.PUVFF_COPYBACKUP | __VSPPROJECTUPGRADEVIAFACTORYFLAGS.PUVFF_SXSBACKUP);
#if FX_ATLEAST_45
if (this.buildEngine.GetLoadedProjects(projectFileName).Count > 0)
{
// project has already been loaded
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_NOREPAIR;
return(VSConstants.S_OK);
}
var projectInspector = new ProjectInspector(projectFileName);
if (projectInspector.IsPoisoned(Site))
{
// poisoned project cannot be opened (does not require upgrade)
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_NOREPAIR;
return(VSConstants.S_OK);
}
#endif
// only upgrade known tool versions.
#if FX_ATLEAST_45
if (string.Equals("4.0", project.ToolsVersion, StringComparison.Ordinal))
{
// For 4.0, we need to take a deeper look. The logic is in
// vsproject\xmake\XMakeConversion\ProjectFileConverter.cs
var projectConverter = new Microsoft.Build.Conversion.ProjectFileConverter();
projectConverter.OldProjectFile = projectFileName;
projectConverter.NewProjectFile = projectFileName;
if (projectConverter.FSharpSpecificConversions(false))
{
upgradeRequired =
projectInspector.IsLikeDev10MinusProject()
? __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_ONEWAYUPGRADE
: __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_SAFEREPAIR;
return(VSConstants.S_OK);
}
else
{
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_NOREPAIR;
return(VSConstants.S_OK);
}
}
else
#endif
if (string.Equals("3.5", project.ToolsVersion, StringComparison.Ordinal) ||
string.Equals("2.0", project.ToolsVersion, StringComparison.Ordinal))
{
// For 3.5 or 2.0, we always need to upgrade.
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_ONEWAYUPGRADE;
return(VSConstants.S_OK);
}
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_NOREPAIR;
return(VSConstants.S_OK);
}
public virtual int DoUpgradeProject_CheckOnly(string projectFileName, IVsUpgradeLogger upgradeLogger, out __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS upgradeRequired, out Guid newProjectFactory, out uint upgradeCapabilityFlags)
{
newProjectFactory = GetType().GUID;
var project = ProjectRootElement.Open(projectFileName);
// enable Side-by-Side and CopyBackup support
upgradeCapabilityFlags = (uint)(__VSPPROJECTUPGRADEVIAFACTORYFLAGS.PUVFF_BACKUPSUPPORTED | __VSPPROJECTUPGRADEVIAFACTORYFLAGS.PUVFF_COPYBACKUP | __VSPPROJECTUPGRADEVIAFACTORYFLAGS.PUVFF_SXSBACKUP);
#if FX_ATLEAST_45
if (this.buildEngine.GetLoadedProjects(projectFileName).Count > 0)
{
// project has already been loaded
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_NOREPAIR;
return VSConstants.S_OK;
}
var projectInspector = new ProjectInspector(projectFileName);
if (projectInspector.IsPoisoned(Site))
{
// poisoned project cannot be opened (does not require upgrade)
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_NOREPAIR;
return VSConstants.S_OK;
}
#endif
// only upgrade known tool versions.
#if FX_ATLEAST_45
if (string.Equals("4.0", project.ToolsVersion, StringComparison.Ordinal))
{
// For 4.0, we need to take a deeper look. The logic is in
// vsproject\xmake\XMakeConversion\ProjectFileConverter.cs
var projectConverter = new Microsoft.Build.Conversion.ProjectFileConverter();
projectConverter.OldProjectFile = projectFileName;
projectConverter.NewProjectFile = projectFileName;
if (projectConverter.FSharpSpecificConversions(false))
{
upgradeRequired =
projectInspector.IsLikeDev10MinusProject()
? __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_ONEWAYUPGRADE
: __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_SAFEREPAIR;
return VSConstants.S_OK;
}
else
{
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_NOREPAIR;
return VSConstants.S_OK;
}
}
else
#endif
if (string.Equals("3.5", project.ToolsVersion, StringComparison.Ordinal)
|| string.Equals("2.0", project.ToolsVersion, StringComparison.Ordinal))
{
// For 3.5 or 2.0, we always need to upgrade.
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_ONEWAYUPGRADE;
return VSConstants.S_OK;
}
upgradeRequired = __VSPPROJECTUPGRADEVIAFACTORYREPAIRFLAGS.VSPUVF_PROJECT_NOREPAIR;
return VSConstants.S_OK;
}
public Container GetContainer()
{
Console.WriteLine("Processing Solution: " + Options.TargetPath);
var stopwatch = Stopwatch.StartNew();
Container solution = new Container();
solution.Name = Options.SolutionName;
solution.SourcePath = Options.TargetPath;
solution.Type = "Solution";
try
{
List <ProjectFile> projectFiles = FindProjectFilesFromSolutionFile(Options.TargetPath, ExcludedProjectTypeGUIDs);
Console.WriteLine("Parsed Solution File");
if (projectFiles.Count > 0)
{
string solutionDirectory = Path.GetDirectoryName(Options.TargetPath);
Console.WriteLine("Solution directory: {0}", solutionDirectory);
var duplicateNames = projectFiles
.GroupBy(project => project.Name)
.Where(group => group.Count() > 1)
.Select(group => group.Key);
var duplicatePaths = projectFiles
.GroupBy(project => project.Path)
.Where(group => group.Count() > 1)
.Select(group => group.Key);
foreach (ProjectFile project in projectFiles)
{
try
{
string projectRelativePath = project.Path;
string projectPath = PathUtil.Combine(solutionDirectory, projectRelativePath);
string projectName = project.Name;
if (duplicateNames.Contains(projectName))
{
Console.WriteLine($"Duplicate project name '{projectName}' found. Using GUID instead.");
projectName = project.GUID;
}
Boolean projectFileExists = false;
try
{
projectFileExists = File.Exists(projectPath);
}
catch (Exception e)
{
Console.WriteLine("Skipping unknown project path: " + projectPath);
continue;
}
if (!projectFileExists)
{
Console.WriteLine("Skipping non-existent project path: " + projectPath);
continue;
}
ProjectInspector projectInspector = new ProjectInspector(new ProjectInspectionOptions(Options)
{
ProjectName = projectName,
TargetPath = projectPath
}, NugetService);
InspectionResult projectResult = projectInspector.Inspect();
if (projectResult != null && projectResult.Containers != null)
{
solution.Children.AddRange(projectResult.Containers);
}
}
catch (Exception ex)
{
Console.WriteLine(ex.ToString());
if (Options.IgnoreFailure)
{
Console.WriteLine("Error inspecting project: {0}", project.Path);
Console.WriteLine("Error inspecting project. Cause: {0}", ex);
}
else
{
throw ex;
}
}
}
}
else
{
Console.WriteLine("No project data found for solution {0}", Options.TargetPath);
}
}
catch (Exception ex)
{
Console.WriteLine(ex.ToString());
if (Options.IgnoreFailure)
{
Console.WriteLine("Error executing Build BOM task. Cause: {0}", ex);
}
else
{
throw ex;
}
}
if (solution != null && solution.Children != null)
{
Console.WriteLine("Found " + solution.Children.Count + " children.");
}
Console.WriteLine("Finished processing solution: " + Options.TargetPath);
Console.WriteLine("Took " + stopwatch.ElapsedMilliseconds + " ms to process.");
return(solution);
}
