private void InitialiseThePipeLine()
{
yahooPipeline = new PipeLine<YahooProjectedPointsMessage>();
yahooPipeline.Register( msg => new LoadPlayerGameMetric( msg ) );
yahooPipeline.Register( msg => new AddYahooPassingPoints( msg ) );
yahooPipeline.Register( msg => new AddYahooRushingPoints( msg ) );
yahooPipeline.Register( msg => new AddYahooReceivingPoints( msg ) );
yahooPipeline.Register( msg => new AddYahooKickingPoints(msg));
}
private void InitialiseThePipeLine()
{
yahooPipeline = new PipeLine <YahooProjectedPointsMessage>();
yahooPipeline.Register(msg => new LoadPlayerGameMetric(msg));
yahooPipeline.Register(msg => new AddYahooPassingPoints(msg));
yahooPipeline.Register(msg => new AddYahooRushingPoints(msg));
yahooPipeline.Register(msg => new AddYahooReceivingPoints(msg));
yahooPipeline.Register(msg => new AddYahooKickingPoints(msg));
}
/// <summary>
/// Reads messages off a queue, deserializes them into the
/// specified type T and invokes registered handlers. Useful when
/// you want to control when messages are processed i.e. at a set
/// time every day, for example.
/// </summary>
public void Receive <T>()
{
GuardAgainstInvalidReadQueue();
GuardAgainstInvalidErrorQueue();
// configure the pipeline for receiving messages
var pipe = new PipeLine <MessageContext>();
pipe.AddAspect(new FailFastAspect <MessageContext>());
pipe.AddAspect(new DiscardAspect <MessageContext>());
pipe.AddAspect(new TransactionAspect <MessageContext>());
pipe.AddAspect(new LoggingAspect <MessageContext>());
pipe.AddAspect(new MoveToErrorQueueAspect <MessageContext>());
pipe.AddAspect(new RemoveFromReadQueueAspect <MessageContext>());
pipe.AddAspect(new RetryAspect <MessageContext>());
pipe.Register(new InvokeUserHandlers <T>());
foreach (Message message in _readQueue.PeekAllMessages())
{
var ctx = new MessageContext {
Message = message, Config = _config, ReadQueue = _readQueue, ErrorQueue = _errorQueue, Handlers = _handlers, OpType = ReceiveOperation, OnStep = LogMessage
};
pipe.Invoke(ctx);
if (ctx.FailFast)
{
break;
}
}
}
/// <summary>
/// Takes a given type T and serializes it to json before
/// wrapping it in an MSMQ message and placing it on a queue.
/// For the lifetime of the bus, if muliple queues are defined then each time Send is invoked:
/// a) if AutoDistributeOnSend is true then a message is placed on the next queue in the list in a round-robin fashion
/// b) otherwise a message is placed on all queues
/// </summary>
public void Send <T>(T dto)
{
GuardAgainstInvalidWriteQueues();
GuardAgainstInvalidErrorQueue();
// configure the pipeline for sending a message
var pipe = new PipeLine <MessageContext>();
pipe.AddAspect(new TransactionAspect <MessageContext>());
pipe.AddAspect(new LoggingAspect <MessageContext>());
pipe.AddAspect(new MoveToErrorQueueAspect <MessageContext>());
pipe.Register(new SendMessage());
if (_config.AutoDistributeOnSend)
{
var message = CreateMsmqMessageFromDto(dto);
var ctx = new MessageContext {
Message = message, Config = _config, WriteQueue = _writeQueues.ElementAt(_nextQueue), ErrorQueue = _errorQueue, OpType = SendOperation, OnStep = LogMessage, OnComplete = SetNextQueueIndex
};
pipe.Invoke(ctx);
}
else
{
foreach (var writeQueue in _writeQueues)
{
var message = CreateMsmqMessageFromDto(dto);
var ctx = new MessageContext {
Message = message, Config = _config, WriteQueue = writeQueue, ErrorQueue = _errorQueue, OpType = SendOperation, OnStep = LogMessage
};
pipe.Invoke(ctx);
}
}
}
/// <summary>
/// Read messages containing the given type T off the defined
/// error queue and moves them to the user defined read queue
/// </summary>
public void ReturnAllErrorMessages()
{
GuardAgainstInvalidReadQueue();
GuardAgainstInvalidErrorQueue();
try
{
// configure the pipeline for return all message to their original queue
var pipe = new PipeLine <MessageContext>();
pipe.AddAspect(new TransactionAspect <MessageContext>());
pipe.AddAspect(new LoggingAspect <MessageContext>());
pipe.Register(new ReturnToSource());
foreach (Message message in _errorQueue.PeekAllMessages())
{
var ctx = new MessageContext {
Message = message, Config = _config, ReadQueue = _readQueue, ErrorQueue = _errorQueue, OpType = ReturnOperation, OnStep = LogMessage
};
pipe.Invoke(ctx);
}
}
catch (Exception ex)
{
throw new BusException($"A problem occurred retreiving messages from the error queue: {ex}");
}
}
/// <summary>
/// Read specific message off the given read queue identified by the messageId parameter and copy it to one or more defined write queues
/// </summary>
/// <param name="messageId"></param>
public void Copy(string messageId)
{
GuardAgainstInvalidReadQueue();
GuardAgainstInvalidWriteQueues();
try
{
// configure the pipeline for copying messages
var pipe = new PipeLine <MessageContext>();
pipe.AddAspect(new TransactionAspect <MessageContext>());
pipe.AddAspect(new LoggingAspect <MessageContext>());
pipe.Register(new CopyMessage());
var message = _readQueue.PeekMessageBy(messageId);
foreach (var queue in _writeQueues)
{
var ctx = new MessageContext {
Message = message, Config = _config, ReadQueue = _readQueue, WriteQueue = queue, OpType = CopyOperation, OnStep = LogMessage
};
pipe.Invoke(ctx);
}
}
catch (Exception ex)
{
throw new BusException($"A problem occurred copying message: {messageId} - error: {ex}");
}
}
/// <summary>
/// Reads messages off a queue as they arrive, deserializes them into the
/// specified type T and invokes registered handlers. This operation is
/// asynchnronous meaning registered handlers will be invoked on the
/// background thread.
/// </summary>
/// <typeparam name="T"></typeparam>
public void ReceiveAsync <T>()
{
GuardAgainstInvalidReadQueue();
GuardAgainstInvalidErrorQueue();
// configure the pipeline for receiving messages
var pipe = new PipeLine <MessageContext>();
pipe.AddAspect(new FailFastAspect <MessageContext>());
pipe.AddAspect(new DiscardAspect <MessageContext>());
pipe.AddAspect(new TransactionAspect <MessageContext>());
pipe.AddAspect(new LoggingAspect <MessageContext>());
pipe.AddAspect(new MoveToErrorQueueAspect <MessageContext>());
pipe.AddAspect(new RemoveFromReadQueueAspect <MessageContext>());
pipe.AddAspect(new RetryAspect <MessageContext>());
pipe.Register(new InvokeUserHandlers <T>());
_readQueue.ReceiveAsync(message => {
var ctx = new MessageContext {
Message = message, Config = _config, ReadQueue = _readQueue, ErrorQueue = _errorQueue, Handlers = _handlers, OpType = ReceiveOperation, OnStep = LogMessage
};
pipe.Invoke(ctx);
if (ctx.FailFast)
{
LogMessage("Invoking StopReceiveAsync because FailFast equals true");
_readQueue.StopReceiveAsync();
}
});
LogMessage("Receiving...");
}
/// <summary>
/// Peek specific message off the given read queue identified by the messageId parameter and return the body as a string
/// </summary>
public string ViewMessageBody(string messageId)
{
GuardAgainstInvalidReadQueue();
try
{
string bodyAsString = string.Empty;
var pipe = new PipeLine <MessageContext>();
pipe.AddAspect(new TransactionAspect <MessageContext>());
pipe.AddAspect(new LoggingAspect <MessageContext>());
pipe.Register(new ViewMessage(s => bodyAsString = s));
var message = _readQueue.PeekMessageBy(messageId);
var ctx = new MessageContext {
Message = message, Config = _config, ReadQueue = _readQueue, OpType = ViewOperation, OnStep = LogMessage
};
ctx.Message.Formatter = new BodyAsStringFormatter();
pipe.Invoke(ctx);
return(bodyAsString);
}
catch (Exception ex)
{
throw new BusException($"A problem occurred viewing message: {messageId} - error: {ex}");
}
}
public void TestMethod1()
{
var loginPipeline = new PipeLine <LogInMessage>();
loginPipeline.Register(new CheckUserSuppliedCredentials());
loginPipeline.Execute(new LogInMessage());
// .Register(new CheckApiKeyIsEnabledForClient(new ClientDetailsDao()))
// .Register(new IsUserLoginAllowed())
// .Register(new ValidateAgainstMembershipApi(new MembershipService()))
// .Register(new GetUserDetails(new UserDetailsDao()));
//.Register(new PublishUserLoggedInEvent(new GetBus()));
}
/// <summary>
/// Takes a given type T and serializes it to json before wrapping it in an MSMQ message and placing it on a queue.
/// For the lifetime of the bus, if muliple queues are defined then each time Send is invoked:
/// a) if a destination has been passed in, send to that queue only
/// b) or if AutoDistributeOnSend is true then a message is placed on the next queue in the list in a round-robin fashion
/// c) otherwise a message is placed on all queues
/// </summary>
public void Send <T>(T dto, string destination = "")
{
GuardAgainstInvalidWriteQueues();
GuardAgainstInvalidErrorQueue();
destination = stripRemoteFrom(destination);
// configure the pipeline for sending a message
var pipe = new PipeLine <MessageContext>();
pipe.AddAspect(new TransactionAspect <MessageContext>());
pipe.AddAspect(new LoggingAspect <MessageContext>());
pipe.AddAspect(new MoveToErrorQueueAspect <MessageContext>());
pipe.Register(new SendMessage());
// if destination passed in override the configured bus, assert that the destination is known and send to it
if (!string.IsNullOrEmpty(destination) && !string.IsNullOrWhiteSpace(destination))
{
GuardAgainstUnknownQueue(destination);
var queue = _writeQueues.First(q => q.FormatName.EndsWith(destination));
var message = CreateMsmqMessageFromDto(dto);
var ctx = new MessageContext {
Message = message, Config = _config, WriteQueue = queue, ErrorQueue = _errorQueue, OpType = SendOperation, OnStep = LogMessage, OnComplete = SetNextQueueIndex
};
pipe.Invoke(ctx);
return;
}
// if applicable, send to the next queue as we carry out load balancing in a round robin fashion
if (_config.AutoDistributeOnSend)
{
var message = CreateMsmqMessageFromDto(dto);
var ctx = new MessageContext {
Message = message, Config = _config, WriteQueue = _writeQueues.ElementAt(_nextQueue), ErrorQueue = _errorQueue, OpType = SendOperation, OnStep = LogMessage, OnComplete = SetNextQueueIndex
};
pipe.Invoke(ctx);
return;
}
// otherwise send the same message to all defined write queues
foreach (var writeQueue in _writeQueues)
{
var message = CreateMsmqMessageFromDto(dto);
var ctx = new MessageContext {
Message = message, Config = _config, WriteQueue = writeQueue, ErrorQueue = _errorQueue, OpType = SendOperation, OnStep = LogMessage
};
pipe.Invoke(ctx);
}
}
/// <summary>
/// Read specific message off the defined error queue and move it to the user defined read queue
/// </summary>
public void ReturnErrorMessage(string id)
{
GuardAgainstInvalidReadQueue();
GuardAgainstInvalidErrorQueue();
try
{
// configure the pipeline for return a message to its original queue
var pipe = new PipeLine <MessageContext>();
pipe.AddAspect(new TransactionAspect <MessageContext>());
pipe.AddAspect(new LoggingAspect <MessageContext>());
pipe.Register(new ReturnToSource());
Message message = _errorQueue.PeekMessageBy(id);
var ctx = new MessageContext {
Message = message, Config = _config, ReadQueue = _readQueue, ErrorQueue = _errorQueue, OpType = ReturnOperation, OnStep = LogMessage
};
pipe.Invoke(ctx);
}
catch (Exception)
{
throw new BusException($"Message with id {id} was not found on the error queue");
}
}
private void InitialiseThePipeLine()
{
pipeline = new PipeLine<PlayerGameProjectionMessage>();
pipeline.Register( msg => new GetGamePrediction( msg ) );
pipeline.Register( msg => new ClearGameMetrics( msg ) );
// this takes most of the time
pipeline.Register( msg => new PullMetricsFromPrediction( msg ) );
pipeline.Register( msg => new SavePlayerGameMetrics( msg ) );
}
