protected override SegmentedList <PointDouble> CreateShape(SegmentedList <PointDouble> tracePoints)
{
RectDouble num5;
PointDouble a = tracePoints[0];
PointDouble b = tracePoints[tracePoints.Count - 1];
PointDouble num3 = new PointDouble(b.X - a.X, b.Y - a.Y);
double num4 = Math.Sqrt((num3.X * num3.X) + (num3.Y * num3.Y));
if ((base.ModifierKeys & Keys.Shift) != Keys.None)
{
PointDouble center = new PointDouble((a.X + b.X) / 2.0, (a.Y + b.Y) / 2.0);
double num7 = num4 / 2.0;
num5 = RectDouble.FromCenter(center, (double)(num7 * 2.0));
}
else
{
num5 = RectDoubleUtil.FromPixelPoints(a, b);
}
PdnGraphicsPath path = new PdnGraphicsPath();
path.AddEllipse(num5.ToGdipRectangleF());
using (Matrix matrix = new Matrix())
{
path.Flatten(matrix, 0.1f);
}
SegmentedList <PointDouble> list = new SegmentedList <PointDouble>(path.PathPoints.Select <PointF, PointDouble>(pt => pt.ToDoublePoint()), 7);
path.Dispose();
return(list);
}
protected override PdnGraphicsPath CreateShapePath(PointF[] points)
{
PointF a = points[0];
PointF b = points[points.Length - 1];
RectangleF rect;
if ((ModifierKeys & Keys.Shift) != 0)
{
PointF dir = new PointF(b.X - a.X, b.Y - a.Y);
float len = (float)Math.Sqrt(dir.X * dir.X + dir.Y * dir.Y);
PointF center = new PointF((a.X + b.X) / 2.0f, (a.Y + b.Y) / 2.0f);
float radius = len / 2.0f;
rect = Utility.RectangleFromCenter(center, radius);
}
else
{
rect = Utility.PointsToRectangle(a, b);
}
if (rect.Width == 0 || rect.Height == 0)
{
return(null);
}
PdnGraphicsPath path = new PdnGraphicsPath();
path.AddEllipse(rect);
path.Flatten(Utility.IdentityMatrix, 0.10f);
double widthPhysical = Math.Abs(rect.Width);
double heightPhysical = Math.Abs(rect.Height);
double areaPhysical = Math.PI * (widthPhysical / 2.0) * (heightPhysical / 2.0);
string numberFormat;
string unitsAbbreviation;
unitsAbbreviation = string.Empty;
numberFormat = "F0";
string unitsString = PdnResources.GetString("MeasurementUnit." + "Pixel" + ".Plural");
string statusText = string.Format(
this.statusTextFormat,
widthPhysical.ToString(numberFormat),
unitsAbbreviation,
heightPhysical.ToString(numberFormat),
unitsAbbreviation,
areaPhysical.ToString(numberFormat),
unitsString);
this.SetStatus(this.ellipseToolIcon, statusText);
return(path);
}
protected override PdnGraphicsPath CreateShapePath(PointF[] points)
{
PointF a = points[0];
PointF b = points[points.Length - 1];
RectangleF rect;
float radius = 10;
if ((ModifierKeys & Keys.Shift) != 0)
{
rect = Utility.PointsToConstrainedRectangle(a, b);
}
else
{
rect = Utility.PointsToRectangle(a, b);
}
PdnGraphicsPath path = this.GetRoundedRect(rect, radius);
path.Flatten();
if (path.PathPoints[0] != path.PathPoints[path.PathPoints.Length - 1])
{
path.AddLine(path.PathPoints[0], path.PathPoints[path.PathPoints.Length - 1]);
path.CloseFigure();
}
string numberFormat;
string unitsAbbreviation;
{
unitsAbbreviation = string.Empty;
numberFormat = "F0";
}
string unitsString = PdnResources.GetString("MeasurementUnit." + "Pixels" + ".Plural");
string statusText = string.Format(
this.statusTextFormat,
rect.Width,
unitsAbbreviation,
rect.Height,
unitsAbbreviation,
"0",
unitsString);
this.SetStatus(this.roundedRectangleToolIcon, statusText);
return(path);
}
protected override List <PointF> CreateShape(List <Point> tracePoints)
{
Point a = tracePoints[0];
Point b = tracePoints[tracePoints.Count - 1];
Point dir = new Point(b.X - a.X, b.Y - a.Y);
float len = (float)Math.Sqrt(dir.X * dir.X + dir.Y * dir.Y);
RectangleF rectF;
if ((ModifierKeys & Keys.Shift) != 0)
{
PointF center = new PointF((float)(a.X + b.X) / 2.0f, (float)(a.Y + b.Y) / 2.0f);
float radius = len / 2;
rectF = Rectangle.Truncate(Utility.RectangleFromCenter(center, radius));
}
else
{
rectF = Utility.PointsToRectangle(a, b);
}
Rectangle rect = Utility.RoundRectangle(rectF);
PdnGraphicsPath path = new PdnGraphicsPath();
path.AddEllipse(rect);
// Avoid asymmetrical circles where the left or right side of the ellipse has a pixel jutting out
using (Matrix m = new Matrix())
{
m.Reset();
m.Translate(-0.5f, -0.5f, MatrixOrder.Append);
path.Transform(m);
}
path.Flatten(Utility.IdentityMatrix, 0.1f);
PointF[] pointsF = path.PathPoints;
path.Dispose();
return(new List <PointF>(pointsF));
}
protected override List<PointF> CreateShape(List<Point> tracePoints)
{
Point a = tracePoints[0];
Point b = tracePoints[tracePoints.Count - 1];
Point dir = new Point(b.X - a.X, b.Y - a.Y);
float len = (float)Math.Sqrt(dir.X * dir.X + dir.Y * dir.Y);
RectangleF rectF;
if ((ModifierKeys & Keys.Shift) != 0)
{
PointF center = new PointF((float)(a.X + b.X) / 2.0f, (float)(a.Y + b.Y) / 2.0f);
float radius = len / 2;
rectF = Rectangle.Truncate(Utility.RectangleFromCenter(center, radius));
}
else
{
rectF = Utility.PointsToRectangle(a, b);
}
Rectangle rect = Utility.RoundRectangle(rectF);
PdnGraphicsPath path = new PdnGraphicsPath();
path.AddEllipse(rect);
// Avoid asymmetrical circles where the left or right side of the ellipse has a pixel jutting out
using (Matrix m = new Matrix())
{
m.Reset();
m.Translate(-0.5f, -0.5f, MatrixOrder.Append);
path.Transform(m);
}
path.Flatten(Utility.IdentityMatrix, 0.1f);
PointF[] pointsF = path.PathPoints;
path.Dispose();
return new List<PointF>(pointsF);
}
protected override PdnGraphicsPath CreateShapePath(PointF[] points)
{
PointF a = points[0];
PointF b = points[points.Length - 1];
RectangleF rect;
if ((ModifierKeys & Keys.Shift) != 0)
{
PointF dir = new PointF(b.X - a.X, b.Y - a.Y);
float len = (float)Math.Sqrt(dir.X * dir.X + dir.Y * dir.Y);
PointF center = new PointF((a.X + b.X) / 2.0f, (a.Y + b.Y) / 2.0f);
float radius = len / 2.0f;
rect = Utility.RectangleFromCenter(center, radius);
}
else
{
rect = Utility.PointsToRectangle(a, b);
}
if (rect.Width == 0 || rect.Height == 0)
{
return null;
}
PdnGraphicsPath path = new PdnGraphicsPath();
path.AddEllipse(rect);
path.Flatten(Utility.IdentityMatrix, 0.10f);
MeasurementUnit units = AppWorkspace.Units;
double widthPhysical = Math.Abs(Document.PixelToPhysicalX(rect.Width, units));
double heightPhysical = Math.Abs(Document.PixelToPhysicalY(rect.Height, units));
double areaPhysical = Math.PI * (widthPhysical / 2.0) * (heightPhysical / 2.0);
string numberFormat;
string unitsAbbreviation;
if (units != MeasurementUnit.Pixel)
{
string unitsAbbreviationName = "MeasurementUnit." + units.ToString() + ".Abbreviation";
unitsAbbreviation = PdnResources.GetString(unitsAbbreviationName);
numberFormat = "F2";
}
else
{
unitsAbbreviation = string.Empty;
numberFormat = "F0";
}
string unitsString = PdnResources.GetString("MeasurementUnit." + units.ToString() + ".Plural");
string statusText = string.Format(
this.statusTextFormat,
widthPhysical.ToString(numberFormat),
unitsAbbreviation,
heightPhysical.ToString(numberFormat),
unitsAbbreviation,
areaPhysical.ToString(numberFormat),
unitsString);
this.SetStatus(this.ellipseToolIcon, statusText);
return path;
}
protected override PdnGraphicsPath CreateShapePath(PointF[] points)
{
if (points.Length >= 4)
{
PdnGraphicsPath path = new PdnGraphicsPath();
switch (this.curveType)
{
default:
case CurveType.Spline:
path.AddCurve(points);
break;
case CurveType.Bezier:
path.AddBezier(points[0], points[1], points[2], points[3]);
break;
}
path.Flatten(Utility.IdentityMatrix, flattenConstant);
return path;
}
else //if (points.Length <= 2)
{
PointF a = points[0];
PointF b = points[points.Length - 1];
if (0 != (ModifierKeys & Keys.Shift) && a != b)
{
ConstrainPoints(ref a, ref b);
}
double angle = -180.0 * Math.Atan2(b.Y - a.Y, b.X - a.X) / Math.PI;
MeasurementUnit units = AppWorkspace.Units;
double offsetXPhysical = Document.PixelToPhysicalX(b.X - a.X, units);
double offsetYPhysical = Document.PixelToPhysicalY(b.Y - a.Y, units);
double offsetLengthPhysical = Math.Sqrt(offsetXPhysical * offsetXPhysical + offsetYPhysical * offsetYPhysical);
string numberFormat;
string unitsAbbreviation;
if (units != MeasurementUnit.Pixel)
{
string unitsAbbreviationName = "MeasurementUnit." + units.ToString() + ".Abbreviation";
unitsAbbreviation = PdnResources.GetString(unitsAbbreviationName);
numberFormat = "F2";
}
else
{
unitsAbbreviation = string.Empty;
numberFormat = "F0";
}
string unitsString = PdnResources.GetString("MeasurementUnit." + units.ToString() + ".Plural");
string statusText = string.Format(
this.statusTextFormat,
offsetXPhysical.ToString(numberFormat),
unitsAbbreviation,
offsetYPhysical.ToString(numberFormat),
unitsAbbreviation,
offsetLengthPhysical.ToString("F2"),
unitsString,
angle.ToString("F2"));
SetStatus(this.lineToolIcon, statusText);
if (a == b)
{
return null;
}
else
{
PdnGraphicsPath path = new PdnGraphicsPath();
PointF[] spline = LineToSpline(a, b, controlPointCount);
path.AddCurve(spline);
path.Flatten(Utility.IdentityMatrix, flattenConstant);
return path;
}
}
}
protected override PdnGraphicsPath CreateShapePath(PointF[] points)
{
if (points.Length >= 4)
{
PdnGraphicsPath path = new PdnGraphicsPath();
switch (this.curveType)
{
default:
case CurveType.Spline:
path.AddCurve(points);
break;
case CurveType.Bezier:
path.AddBezier(points[0], points[1], points[2], points[3]);
break;
}
path.Flatten(Utility.IdentityMatrix, flattenConstant);
return(path);
}
else //if (points.Length <= 2)
{
PointF a = points[0];
PointF b = points[points.Length - 1];
if (0 != (ModifierKeys & Keys.Shift) && a != b)
{
ConstrainPoints(ref a, ref b);
}
double angle = -180.0 * Math.Atan2(b.Y - a.Y, b.X - a.X) / Math.PI;
MeasurementUnit units = AppWorkspace.Units;
double offsetXPhysical = Document.PixelToPhysicalX(b.X - a.X, units);
double offsetYPhysical = Document.PixelToPhysicalY(b.Y - a.Y, units);
double offsetLengthPhysical = Math.Sqrt(offsetXPhysical * offsetXPhysical + offsetYPhysical * offsetYPhysical);
string numberFormat;
string unitsAbbreviation;
if (units != MeasurementUnit.Pixel)
{
string unitsAbbreviationName = "MeasurementUnit." + units.ToString() + ".Abbreviation";
unitsAbbreviation = PdnResources.GetString(unitsAbbreviationName);
numberFormat = "F2";
}
else
{
unitsAbbreviation = string.Empty;
numberFormat = "F0";
}
string unitsString = PdnResources.GetString("MeasurementUnit." + units.ToString() + ".Plural");
string statusText = string.Format(
this.statusTextFormat,
offsetXPhysical.ToString(numberFormat),
unitsAbbreviation,
offsetYPhysical.ToString(numberFormat),
unitsAbbreviation,
offsetLengthPhysical.ToString("F2"),
unitsString,
angle.ToString("F2"));
SetStatus(this.lineToolIcon, statusText);
if (a == b)
{
return(null);
}
else
{
PdnGraphicsPath path = new PdnGraphicsPath();
PointF[] spline = LineToSpline(a, b, controlPointCount);
path.AddCurve(spline);
path.Flatten(Utility.IdentityMatrix, flattenConstant);
return(path);
}
}
}
protected override PdnGraphicsPath CreateShapePath(PointF[] points)
{
PointF a = points[0];
PointF b = points[points.Length - 1];
RectangleF rect;
float radius = 10;
if ((ModifierKeys & Keys.Shift) != 0)
{
rect = Utility.PointsToConstrainedRectangle(a, b);
}
else
{
rect = Utility.PointsToRectangle(a, b);
}
PdnGraphicsPath path = this.GetRoundedRect(rect, radius);
path.Flatten();
if (path.PathPoints[0] != path.PathPoints[path.PathPoints.Length - 1])
{
path.AddLine(path.PathPoints[0], path.PathPoints[path.PathPoints.Length - 1]);
path.CloseFigure();
}
MeasurementUnit units = AppWorkspace.Units;
double widthPhysical = Math.Abs(Document.PixelToPhysicalX(rect.Width, units));
double heightPhysical = Math.Abs(Document.PixelToPhysicalY(rect.Height, units));
double areaPhysical = widthPhysical * heightPhysical;
string numberFormat;
string unitsAbbreviation;
if (units != MeasurementUnit.Pixel)
{
string unitsAbbreviationName = "MeasurementUnit." + units.ToString() + ".Abbreviation";
unitsAbbreviation = PdnResources.GetString(unitsAbbreviationName);
numberFormat = "F2";
}
else
{
unitsAbbreviation = string.Empty;
numberFormat = "F0";
}
string unitsString = PdnResources.GetString("MeasurementUnit." + units.ToString() + ".Plural");
string statusText = string.Format(
this.statusTextFormat,
widthPhysical.ToString(numberFormat),
unitsAbbreviation,
heightPhysical.ToString(numberFormat),
unitsAbbreviation,
areaPhysical.ToString(numberFormat),
unitsString);
this.SetStatus(this.roundedRectangleToolIcon, statusText);
return(path);
}
