Exemplo n.º 1
0
        internal void Draw
        (
            PdfContents Contents,
            double DrawRectX,
            double DrawRectY,
            double DrawRectWidth,
            double DrawRectHeight,
            ContentAlignment Alignment = (ContentAlignment)0
        )
        {
            // save drawing rectangle in user coordinates
            this.DrawRectX      = DrawRectX;
            this.DrawRectY      = DrawRectY;
            this.DrawRectWidth  = DrawRectWidth;
            this.DrawRectHeight = DrawRectHeight;

            // test arguments
            if (DrawRectWidth == 0 && DrawRectHeight == 0 || DrawRectWidth == 0 && PathBBoxWidth != 0 || DrawRectHeight == 0 && PathBBoxHeight != 0)
            {
                throw new ApplicationException("DrawWPFPath: Drawing rectangle is empty");
            }

            // set transformation matrix
            SetTransformation(Alignment);

            // clip
            if (Stroking == null && NonStroking == null)
            {
                // build clipping path
                BuildPath(Contents, FillRule == FillRule.EvenOdd ? PaintOp.ClipPathEor : PaintOp.ClipPathWnr);
                return;
            }

            // paint operator
            PaintOp PaintOperator;

            // brush is defined as shading
            if (NonStroking != null && (NonStroking.GetType() == typeof(SysMedia.LinearGradientBrush) || NonStroking.GetType() == typeof(SysMedia.RadialGradientBrush) ||
                                        NonStroking.GetType() == typeof(PdfAxialShading) || NonStroking.GetType() == typeof(PdfRadialShading)))
            {
                // save graphics state
                Contents.SaveGraphicsState();

                // build clipping path
                BuildPath(Contents, FillRule == FillRule.EvenOdd ? PaintOp.ClipPathEor : PaintOp.ClipPathWnr);

                // set bland mode
                if (BlendMode != BlendMode.Normal)
                {
                    Contents.SetBlendMode(BlendMode);
                }

                // set opacity
                Contents.SetAlphaNonStroking(BrushOpacity);

                // draw linera gradient brush shading bounded by clip path
                if (NonStroking.GetType() == typeof(SysMedia.LinearGradientBrush))
                {
                    PdfAxialShading AxialShading = new PdfAxialShading(Contents.Document, (SysMedia.LinearGradientBrush)NonStroking);
                    AxialShading.SetBoundingBox(DrawRectX, DrawRectY, DrawRectWidth, DrawRectHeight);
                    Contents.DrawShading(AxialShading);
                }

                // draw axial shading bounded by clip path
                else if (NonStroking.GetType() == typeof(PdfAxialShading))
                {
                    ((PdfAxialShading)NonStroking).SetBoundingBox(DrawRectX, DrawRectY, DrawRectWidth, DrawRectHeight);
                    Contents.DrawShading((PdfAxialShading)NonStroking);
                }

                // draw radial gradient brush shading bounded by clip path
                else if (NonStroking.GetType() == typeof(SysMedia.RadialGradientBrush))
                {
                    PdfRadialShading RadialShading = new PdfRadialShading(Contents.Document, (SysMedia.RadialGradientBrush)NonStroking);
                    RadialShading.SetBoundingBox(DrawRectX, DrawRectY, DrawRectWidth, DrawRectHeight);
                    Contents.DrawShading(RadialShading);
                }

                // draw radial shading bounded by clip path
                else
                {
                    ((PdfRadialShading)NonStroking).SetBoundingBox(DrawRectX, DrawRectY, DrawRectWidth, DrawRectHeight);
                    Contents.DrawShading((PdfRadialShading)NonStroking);
                }

                // remove clipping path
                Contents.RestoreGraphicsState();

                // no pen defined
                if (Stroking == null)
                {
                    return;
                }

                // pen is defined
                PaintOperator = PaintOp.Stroke;
            }

            // set paint operator for all other cases (no shading)
            else
            {
                // we have pen and no brush
                if (NonStroking == null)
                {
                    PaintOperator = PaintOp.Stroke;
                }
                // we have brush but no pen
                else if (Stroking == null)
                {
                    PaintOperator = FillRule == FillRule.EvenOdd ? PaintOp.FillEor : PaintOp.Fill;
                }
                // we have brush and pen
                else
                {
                    PaintOperator = FillRule == FillRule.EvenOdd ? PaintOp.CloseFillStrokeEor: PaintOp.CloseFillStroke;
                }
            }

            // save graphics state
            Contents.SaveGraphicsState();

            // set bland mode
            if (BlendMode != BlendMode.Normal)
            {
                Contents.SetBlendMode(BlendMode);
            }

            // stroking (pen) is defined
            if (Stroking != null)
            {
                if (Stroking.GetType() == typeof(Color))
                {
                    // pen color
                    Contents.SetColorStroking((Color)Stroking);

                    // set opacity
                    if (PenOpacity != 1.0)
                    {
                        Contents.SetAlphaStroking(PenOpacity);
                    }

                    // pen width
                    if (PenWidth >= 0)
                    {
                        Contents.SetLineWidth(PenWidth);
                    }

                    // line cap
                    if (LineCap != (PdfLineCap)(-1))
                    {
                        Contents.SetLineCap(LineCap);
                    }

                    // line join
                    if (LineJoin != (PdfLineJoin)(-1))
                    {
                        Contents.SetLineJoin(LineJoin);
                    }

                    // Miter
                    if (MiterLimit != -1)
                    {
                        Contents.SetMiterLimit(MiterLimit);
                    }

                    // line is made of dashes
                    if (DashArray != null)
                    {
                        Contents.SetDashLine(DashArray, DashPhase);
                    }
                }

                else if (Stroking.GetType() == typeof(SysMedia.Pen))
                {
                    // media pen short cut
                    SysMedia.Pen Pen = (SysMedia.Pen)Stroking;

                    // media brush shortcut
                    SysMedia.SolidColorBrush Brush = (SysMedia.SolidColorBrush)Pen.Brush;

                    // media pen color short cut
                    SysMedia.Color PenColor = Brush.Color;

                    // pen color
                    Contents.SetColorStroking(Color.FromArgb(PenColor.R, PenColor.G, PenColor.B));

                    // pen opacity
                    if (PenColor.A != 255 || Brush.Opacity != 1.0)
                    {
                        Contents.SetAlphaStroking((PenColor.A / 255.0) * Brush.Opacity);
                    }

                    // pen thickness converted to user units
                    double Thickness = Pen.Thickness * Math.Max(Math.Abs(ScaleX), Math.Abs(ScaleY));
                    Contents.SetLineWidth(Thickness);

                    // line cap
                    // Note: PDF line cap is the same for start and end. We will ignore EndLineCap
                    // Triangle line cap will be round
                    switch (Pen.StartLineCap)
                    {
                    case SysMedia.PenLineCap.Flat: Contents.SetLineCap(PdfLineCap.Butt); break;

                    case SysMedia.PenLineCap.Square: Contents.SetLineCap(PdfLineCap.Square); break;

                    default: Contents.SetLineCap(PdfLineCap.Round); break;
                    }

                    // line join
                    switch (Pen.LineJoin)
                    {
                    case SysMedia.PenLineJoin.Bevel: Contents.SetLineJoin(PdfLineJoin.Bevel); break;

                    case SysMedia.PenLineJoin.Miter: Contents.SetLineJoin(PdfLineJoin.Miter); break;

                    default: Contents.SetLineJoin(PdfLineJoin.Round); break;
                    }

                    // Miter
                    Contents.SetMiterLimit(Pen.MiterLimit);

                    // dash pattern
                    if (Pen.DashStyle.Dashes.Count > 0)
                    {
                        int      End          = Pen.DashStyle.Dashes.Count;
                        double[] PenDashArray = new double[End];
                        for (int Index = 0; Index < End; Index++)
                        {
                            PenDashArray[Index] = Thickness * Pen.DashStyle.Dashes[Index];
                        }
                        Contents.SetDashLine(PenDashArray, Thickness * Pen.DashStyle.Offset);
                    }
                }
            }

            // non-stroking (brush) is defined
            // note shading brush was handled above
            if (NonStroking != null)
            {
                // set opacity
                if (BrushOpacity != 1.0)
                {
                    Contents.SetAlphaNonStroking(BrushOpacity);
                }

                // brush color
                if (NonStroking.GetType() == typeof(Color))
                {
                    Contents.SetColorNonStroking((Color)NonStroking);
                }

                else if (NonStroking.GetType() == typeof(PdfTilingPattern))
                {
                    Contents.SetPatternNonStroking((PdfTilingPattern)NonStroking);
                }
            }

            // build path
            BuildPath(Contents, PaintOperator);

            // restore graphics state
            Contents.RestoreGraphicsState();
            return;
        }
Exemplo n.º 2
0
        ////////////////////////////////////////////////////////////////////
        // Draw example of order form
        ////////////////////////////////////////////////////////////////////

        private void DrawBookOrderForm()
        {
            // Define constants to make the code readable
            const Double Left       = 4.35;
            const Double Top        = 4.65;
            const Double Bottom     = 1.1;
            const Double Right      = 7.4;
            const Double FontSize   = 9.0;
            const Double MarginHor  = 0.04;
            const Double MarginVer  = 0.04;
            const Double FrameWidth = 0.015;
            const Double GridWidth  = 0.01;

            // column widths
            Double ColWidthPrice = ArialNormal.TextWidth(FontSize, "9999.99") + 2.0 * MarginHor;
            Double ColWidthQty   = ArialNormal.TextWidth(FontSize, "Qty") + 2.0 * MarginHor;
            Double ColWidthDesc  = Right - Left - FrameWidth - 3 * GridWidth - 2 * ColWidthPrice - ColWidthQty;

            // define table
            PdfTable Table = new PdfTable(Page, Contents, ArialNormal, FontSize);

            Table.TableArea = new PdfRectangle(Left, Bottom, Right, Top);
            Table.SetColumnWidth(new Double[] { ColWidthDesc, ColWidthPrice, ColWidthQty, ColWidthPrice });

            // define borders
            Table.Borders.SetAllBorders(FrameWidth, GridWidth);

            // margin
            PdfRectangle Margin = new PdfRectangle(MarginHor, MarginVer);

            // default header style
            Table.DefaultHeaderStyle.Margin          = Margin;
            Table.DefaultHeaderStyle.BackgroundColor = Color.FromArgb(255, 196, 255);
            Table.DefaultHeaderStyle.Alignment       = ContentAlignment.MiddleRight;

            // private header style for description
            Table.Header[0].Style           = Table.HeaderStyle;
            Table.Header[0].Style.Alignment = ContentAlignment.MiddleLeft;

            // table heading
            Table.Header[0].Value = "Description";
            Table.Header[1].Value = "Price";
            Table.Header[2].Value = "Qty";
            Table.Header[3].Value = "Total";

            // default style
            Table.DefaultCellStyle.Margin = Margin;

            // description column style
            Table.Cell[0].Style = Table.CellStyle;
            Table.Cell[0].Style.MultiLineText = true;

            // qty column style
            Table.Cell[2].Style           = Table.CellStyle;
            Table.Cell[2].Style.Alignment = ContentAlignment.BottomRight;

            Table.DefaultCellStyle.Format    = "#,##0.00";
            Table.DefaultCellStyle.Alignment = ContentAlignment.BottomRight;

            Contents.DrawText(ArialBold, FontSize, 0.5 * (Left + Right), Top + MarginVer + Table.DefaultCellStyle.FontDescent,
                              TextJustify.Center, DrawStyle.Normal, Color.Purple, "Example of PdfTable support");

            // reset order total
            Double Total = 0;

            // loop for all items in the order
            // Order class is a atabase simulation for this example
            foreach (Order Book in Order.OrderList)
            {
                Table.Cell[0].Value = Book.Title + ". By: " + Book.Authors;
                Table.Cell[1].Value = Book.Price;
                Table.Cell[2].Value = Book.Qty;
                Table.Cell[3].Value = Book.Total;
                Table.DrawRow();

                // accumulate total
                Total += Book.Total;
            }
            Table.Close();

            // save graphics state
            Contents.SaveGraphicsState();

            // form line width 0.01"
            Contents.SetLineWidth(FrameWidth);
            Contents.SetLineCap(PdfLineCap.Square);

            // draw total before tax
            Double[] ColumnPosition = Table.ColumnPosition;
            Double   TotalDesc      = ColumnPosition[3] - MarginHor;
            Double   TotalValue     = ColumnPosition[4] - MarginHor;
            Double   PosY           = Table.RowTopPosition - 2.0 * MarginVer - Table.DefaultCellStyle.FontAscent;

            Contents.DrawText(ArialNormal, FontSize, TotalDesc, PosY, TextJustify.Right, "Total before tax");
            Contents.DrawText(ArialNormal, FontSize, TotalValue, PosY, TextJustify.Right, Total.ToString("#.00"));

            // draw tax (Ontario Canada HST)
            PosY -= Table.DefaultCellStyle.FontLineSpacing;
            Contents.DrawText(ArialNormal, FontSize, TotalDesc, PosY, TextJustify.Right, "Tax (13%)");
            Double Tax = Math.Round(0.13 * Total, 2, MidpointRounding.AwayFromZero);

            Contents.DrawText(ArialNormal, FontSize, TotalValue, PosY, TextJustify.Right, Tax.ToString("#.00"));

            // draw total line
            PosY -= Table.DefaultCellStyle.FontDescent + 0.5 * MarginVer;
            Contents.DrawLine(ColumnPosition[3], PosY, ColumnPosition[4], PosY);

            // draw final total
            PosY -= Table.DefaultCellStyle.FontAscent + 0.5 * MarginVer;
            Contents.DrawText(ArialNormal, FontSize, TotalDesc, PosY, TextJustify.Right, "Total payable");
            Total += Tax;
            Contents.DrawText(ArialNormal, FontSize, TotalValue, PosY, TextJustify.Right, Total.ToString("#.00"));

            PosY -= Table.DefaultCellStyle.FontDescent + MarginVer;
            Contents.DrawLine(ColumnPosition[0], Table.RowTopPosition, ColumnPosition[0], PosY);
            Contents.DrawLine(ColumnPosition[0], PosY, ColumnPosition[4], PosY);
            Contents.DrawLine(ColumnPosition[4], Table.RowTopPosition, ColumnPosition[4], PosY);

            // restore graphics state
            Contents.RestoreGraphicsState();
            return;
        }