private static Reinforcement[] CreateReinfObjs(RhinoDoc doc, ObjRef[] objects, int layerIndex, string mName,
double diam)
{
List <Reinforcement> reinfList = new List <Reinforcement>();
foreach (ObjRef obj in objects)
{
if (obj.Point() == null)
{
continue; //Checks that object is a point
}
Point3d point = obj.Point().Location;
Reinforcement reinf = new Reinforcement(ProjectPlugIn.Instance.CurrentBeam)
{
Material = new SteelMaterial(mName, SteelType.Reinforcement, ProjectPlugIn.Instance.CurrentBeam),
Centroid = point,
Diameter = diam
};
reinfList.Add(reinf);
ObjectAttributes attr = new ObjectAttributes();
attr.UserData.Add(reinf);
attr.SetUserString("Name", "Reinforcement");
attr.SetUserString("infType", "Reinforcement");
attr.LayerIndex = layerIndex;
doc.Objects.ModifyAttributes(obj, attr, true);
}
return(reinfList.ToArray());
}
//This method saves the useraddributes into the outlineCurve
private static GeometryLarge DrawAndSaveUserAttr(Brep brep, RhinoDoc doc, MaterialType mType, string mName)
{
ObjectAttributes attr = new ObjectAttributes();
attr.SetUserString("Name", Enum.GetName(typeof(MaterialType), mType));
List <Layer> layers = (from layer in doc.Layers
where layer.Name == Enum.GetName(typeof(MaterialType), mType)
select layer).ToList <Rhino.DocObjects.Layer>();
if (layers.Count == 0 || (layers.Count == 1 && layers[0].IsDeleted))
{
attr.LayerIndex = createLayer(doc, mType);
}
else if (layers.Count == 1)
{
attr.LayerIndex = layers[0].LayerIndex;
//layers[0].IsLocked = true;
layers[0].CommitChanges();
}
else
{
RhinoApp.WriteLine("More than one layer with name Concrete excists. Remove one of them."); return(null);
}
GeometryLarge seg = new GeometryLarge(mType, mName, brep);
attr.UserData.Add(seg);
doc.Objects.AddBrep(brep, attr);
return(seg);
}
private void Bake(List <SmSatellite> sats)
{
Rhino.DocObjects.Tables.ObjectTable ot = Rhino.RhinoDoc.ActiveDoc.Objects;
// Bake Earth
double scale = SpaceMonkeyCoreViewModel.Instance.ScaleFactor;
Sphere earth = new Sphere(new Point3d(0, 0, 0), 6378.137 * scale);
ot.AddSphere(earth);
foreach (SmSatellite s in sats)
{
Point3d pt = SatToPoint(s);
ObjectAttributes attr = new ObjectAttributes();
attr.SetUserString(nameof(SmSatellite.SatId), s.SatId.ToString());
attr.SetUserString(nameof(SmSatellite.SatName), s.SatName);
attr.SetUserString(nameof(SmSatellite.IntDesignator), s.IntDesignator);
attr.SetUserString(nameof(SmSatellite.LaunchDate), s.LaunchDate);
attr.SetUserString(nameof(SmSatellite.SatLat), s.SatLat.ToString());
attr.SetUserString(nameof(SmSatellite.SatLng), s.SatLng.ToString());
attr.SetUserString(nameof(SmSatellite.SatAlt), s.SatAlt.ToString());
ot.AddPoint(pt, attr);
}
foreach (var view in Rhino.RhinoDoc.ActiveDoc.Views)
{
view.Redraw();
}
}
//This method saves the useraddributes into the outlineCurve
private static GeometryLarge DrawAndSaveUserAttr(Brep brep, List <Curve> baseCurves, RhinoDoc doc, MaterialType mType, string mName)
{
ObjectAttributes attr = new ObjectAttributes();
attr.SetUserString("Name", Enum.GetName(typeof(MaterialType), mType));
attr.SetUserString("infType", "GeometryLarge");
GetLayerIndex(mType, ref attr);
GeometryLarge seg = new GeometryLarge(mType, mName, brep, ProjectPlugIn.Instance.CurrentBeam)
{
BaseCurves = baseCurves
};
attr.UserData.Add(seg);
Guid guid = doc.Objects.AddBrep(brep);
doc.Objects.ModifyAttributes(guid, attr, true);
//doc.Objects.AddBrep(brep, attr);
return(seg);
}
private void BakeLine()
{
RhinoDoc activeDoc = RhinoDoc.ActiveDoc;
var parentLayerNames = new[] { "Column", "Girder", "Post", "Beam", "Brace", "Slab", "Wall" };
Color[] layerColors = { Color.Red, Color.Green, Color.Aquamarine, Color.LightCoral, Color.MediumPurple, Color.DarkGray, Color.CornflowerBlue };
GeometryBaker.MakeParentLayers(activeDoc, parentLayerNames, layerColors);
Dictionary <string, string>[][] infoArray = Utils.TagUtils.GetAllSectionInfoArray(_stBridge.StbModel.StbMembers, _stBridge.StbModel.StbSections);
foreach ((GH_Structure <GH_Line> lines, int i) in _lineList.Select((frameBrep, index) => (frameBrep, index)))
{
Layer parentLayer = activeDoc.Layers.FindName(parentLayerNames[i]);
int parentIndex = parentLayer.Index;
Guid parentId = parentLayer.Id;
foreach ((Line line, int bIndex) in lines.Select((geometry, bIndex) => (geometry.Value, bIndex)))
{
var objAttr = new ObjectAttributes();
if (i < 5)
{
Dictionary <string, string>[] infos = infoArray[i];
Dictionary <string, string> info = infos[bIndex];
foreach (KeyValuePair <string, string> pair in info)
{
objAttr.SetUserString(pair.Key, pair.Value);
}
var layer = new Layer {
Name = info["name"], ParentLayerId = parentId, Color = layerColors[i]
};
int layerIndex = activeDoc.Layers.Add(layer);
if (layerIndex == -1)
{
layer = activeDoc.Layers.FindName(info["name"]);
layerIndex = layer.Index;
}
objAttr.LayerIndex = layerIndex;
}
else
{
objAttr.LayerIndex = parentIndex;
}
activeDoc.Objects.AddLine(line, objAttr);
}
}
}
//this method draws the curves and saves the useraddributes into them
private void DrawAndSaveUserAttr(List <Brep> breps, RhinoDoc doc, RhinoObject obj)
{
//TODO not a fully correctly implemented geometry large initialization
GeometryLarge seg = new GeometryLarge(MaterialType.Concrete, "C30/37", breps[0]);
foreach (Brep brep in breps)
{
seg.GeometrySegments.Add(new GeometrySegment(brep, seg.Material));
}
ObjectAttributes attr = new ObjectAttributes();
attr.SetUserString("Name", "Concrete");
List <Layer> layers = (from layer in doc.Layers
where layer.Name == "Concrete"
select layer).ToList <Rhino.DocObjects.Layer>();;
if (layers.Count == 0 || (layers.Count == 1 && layers[0].IsDeleted))
{
Color color = Color.FromArgb(170, 170, 170);
doc.Layers.Add("Concrete", color);
int index = doc.Layers.Find("Concrete", true);
Layer layer = doc.Layers[index];
//layer.IsLocked = true;
attr.LayerIndex = index;
layer.CommitChanges();
}
else if (layers.Count == 1)
{
attr.LayerIndex = layers[0].LayerIndex;
//layers[0].IsLocked = true;
layers[0].CommitChanges();
}
else
{
RhinoApp.WriteLine("More than one layer with name Concrete excists. Remove one of them."); return;
}
attr.UserData.Add(seg);
doc.Objects.ModifyAttributes(obj, attr, true);
}
/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
string dir = ""; DA.GetData("directoryname", ref dir);
string bname = ""; DA.GetData("beamfilename", ref bname); string cname = ""; DA.GetData("columnfilename", ref cname); string seclistname = ""; DA.GetData("sectionlistname", ref seclistname);
if (seclistname == "none" | seclistname == "None")
{
seclistname = "";
}
var secuserstring = "断面"; DA.GetData("userstring(sec)", ref secuserstring);
var secname = new List <string>(); int nsec = 0; var sec_No = new List <int>();
var layerlist = new List <string>(); var layerindex = new List <int>(); var read_or_write = 0;//0ならsectionlistを新たに作る，1なら既存のリストを使う
var linetexts = new List <string>(); var userstrings = new List <string>(); var uservalues = new List <List <string> >();
if (dir == "default")
{
dir = Directory.GetCurrentDirectory();
}
var doc = RhinoDoc.ActiveDoc;
var objs = new List <Guid>(); var lines = new List <Line>(); var xyz = new List <Point3d>();
StreamWriter w = new StreamWriter(@dir + "/temp", false); StreamReader r;
if (seclistname != "")
{
if (File.Exists(@dir + "/" + seclistname))
{
read_or_write = 1;
}
else
{
w.Close(); w = new StreamWriter(@dir + "/" + seclistname, false);
}
}
if (seclistname != "" && read_or_write == 0)
{
w.WriteLine("No.,TYPE,P1,P2,P3,P4");
}
else if (seclistname != "" && read_or_write == 1)
{
r = new StreamReader(@dir + "/" + seclistname);
int k = 0;
while (!r.EndOfStream)
{
string line = r.ReadLine(); linetexts.Add(line); // CSVファイルの一行を読み込む
string[] values = line.Split(','); // 読み込んだ一行をカンマ毎に分けて配列に格納する
if (k != 0)
{
var type = values[1]; var p1 = values[2].ToString(); var p2 = values[3].ToString(); var p3 = values[4].ToString(); var p4 = values[5].ToString();
string sec = type + "-" + p1 + "x" + p2 + "x" + p3 + "x" + p4;
secname.Add(sec);
nsec += 1;
}
k += 1;
}
r.Close();
w.Close(); w = new StreamWriter(@dir + "/" + seclistname, true); //追記用
}
int check = 0; //最初の追加かどうかのflag(追記するsection.csvの一番最初に改行を入れるため)
if (bname != "") //0:Level,1:Family_Name,2:FamilyType_Name,3:Start_PointX,4:Start_PointY,5:Start_PointZ,6:End_PointX,7:End_PointY,8:End_PointZ,9:bf,10:d,11:kr,12:tf,13:tw,14:mat,15:angle,16:joint,17:Lby,18:Lbz
{
var filename = dir + "/" + bname;
StreamReader sr = new StreamReader(@filename);// 読み込みたいCSVファイルのパスを指定して開く, System.Text.Encoding.GetEncoding("shift_jis")
int k = 0;
while (!sr.EndOfStream)
{
string line = sr.ReadLine(); // CSVファイルの一行を読み込む
string[] values = line.Split(','); // 読み込んだ一行をカンマ毎に分けて配列に格納する
if (k != 0)
{
var r1 = new Point3d(double.Parse(values[3]) / 1000.0, double.Parse(values[4]) / 1000.0, double.Parse(values[5]) / 1000.0);
var r2 = new Point3d(double.Parse(values[6]) / 1000.0, double.Parse(values[7]) / 1000.0, double.Parse(values[8]) / 1000.0);
lines.Add(new Line(r1, r2));
if (values[1].Contains("角形") == true)
{
var s1 = (double.Parse(values[9]) / 1000.0).ToString(); var s2 = (double.Parse(values[10]) / 1000.0).ToString(); var s3 = (double.Parse(values[11]) / 1000.0).ToString(); var s4 = (double.Parse(values[12]) / 1000.0).ToString();
string sec = "□-" + s1 + "x" + s2 + "x" + s3 + "x" + s4;
if (secname.Contains(sec) == false)
{
secname.Add(sec); if (read_or_write == 1 && check == 0)
{
w.WriteLine(""); check += 1;
}
if (seclistname != "")
{
var text = nsec.ToString() + ",□," + s1 + "," + s2 + "," + s3 + "," + s4; w.WriteLine(text); linetexts.Add(text);
}
nsec += 1;
}
sec_No.Add(secname.IndexOf(sec));
}
else if (values[1].Contains("H") == true)
{
var s1 = (double.Parse(values[9]) / 1000.0).ToString(); var s2 = (double.Parse(values[10]) / 1000.0).ToString(); var s3 = (double.Parse(values[11]) / 1000.0).ToString(); var s4 = (double.Parse(values[12]) / 1000.0).ToString();
var sec = "H-" + s1 + "x" + s2 + "x" + s3 + "x" + s4;
if (secname.Contains(sec) == false)
{
secname.Add(sec); if (read_or_write == 1 && check == 0)
{
w.WriteLine(""); check += 1;
}
if (seclistname != "")
{
var text = nsec.ToString() + ",H," + s1 + "," + s2 + "," + s3 + "," + s4; w.WriteLine(text); linetexts.Add(text);
}
nsec += 1;
}
sec_No.Add(secname.IndexOf(sec));
}
if (layerlist.Contains(values[0]) == false)
{
layerlist.Add(values[0]);
}
layerindex.Add(layerlist.IndexOf(values[0]));
var uservalue = new List <string>();
for (int i = 13; i < values.Length; i++)
{
if (i == 17 || i == 18)
{
uservalue.Add((double.Parse(values[i]) / 1000.0).ToString());
}
else
{
uservalue.Add(values[i]);
}
}
uservalues.Add(uservalue);
}
else
{
if (values.Length >= 14)
{
for (int i = 13; i < values.Length; i++)
{
userstrings.Add(values[i]);
}
}
}
k += 1;
}
}
if (cname != "")
{
var filename = dir + "/" + cname;
StreamReader sr = new StreamReader(@filename);// 読み込みたいCSVファイルのパスを指定して開く, System.Text.Encoding.GetEncoding("shift_jis")
int k = 0;
while (!sr.EndOfStream)
{
string line = sr.ReadLine(); // CSVファイルの一行を読み込む
string[] values = line.Split(','); // 読み込んだ一行をカンマ毎に分けて配列に格納する
if (k != 0)
{
var r1 = new Point3d(double.Parse(values[3]) / 1000.0, double.Parse(values[4]) / 1000.0, double.Parse(values[5]) / 1000.0);
var r2 = new Point3d(double.Parse(values[6]) / 1000.0, double.Parse(values[7]) / 1000.0, double.Parse(values[8]) / 1000.0);
lines.Add(new Line(r1, r2));
if (values[1].Contains("角形") == true)
{
var s1 = (double.Parse(values[9]) / 1000.0).ToString(); var s2 = (double.Parse(values[10]) / 1000.0).ToString(); var s3 = (double.Parse(values[11]) / 1000.0).ToString(); var s4 = (double.Parse(values[12]) / 1000.0).ToString();
string sec = "□-" + s1 + "x" + s2 + "x" + s3 + "x" + s4;
if (secname.Contains(sec) == false)
{
secname.Add(sec); if (read_or_write == 1 && check == 0)
{
w.WriteLine(""); check += 1;
}
if (seclistname != "")
{
var text = nsec.ToString() + ",□," + s1 + "," + s2 + "," + s3 + "," + s4; w.WriteLine(text); linetexts.Add(text);
}
nsec += 1;
}
sec_No.Add(secname.IndexOf(sec));
}
else if (values[1].Contains("H") == true)
{
var s1 = (double.Parse(values[9]) / 1000.0).ToString(); var s2 = (double.Parse(values[10]) / 1000.0).ToString(); var s3 = (double.Parse(values[11]) / 1000.0).ToString(); var s4 = (double.Parse(values[12]) / 1000.0).ToString();
var sec = "H-" + s1 + "x" + s2 + "x" + s3 + "x" + s4;
if (secname.Contains(sec) == false)
{
secname.Add(sec); if (read_or_write == 1 && check == 0)
{
w.WriteLine(""); check += 1;
}
if (seclistname != "")
{
var text = nsec.ToString() + ",H," + s1 + "," + s2 + "," + s3 + "," + s4; w.WriteLine(text); linetexts.Add(text);
}
nsec += 1;
}
sec_No.Add(secname.IndexOf(sec));
}
if (layerlist.Contains(values[0]) == false)
{
layerlist.Add(values[0]);
}
layerindex.Add(layerlist.IndexOf(values[0]));
var uservalue = new List <string>();
for (int i = 13; i < values.Length; i++)
{
if (i == 17 || i == 18)
{
uservalue.Add((double.Parse(values[i]) / 1000.0).ToString());
}
else
{
uservalue.Add(values[i]);
}
}
uservalues.Add(uservalue);
}
k += 1;
}
}
w.Close();
//最後の改行を削除///////////////////////////////////////////////////////////////////////////////
w = new StreamWriter(@dir + "/" + seclistname, false); w.Write("No.,TYPE,P1,P2,P3,P4");
for (int i = 1; i < linetexts.Count; i++)
{
w.Write(Environment.NewLine + linetexts[i]);
}
w.Close();
/////////////////////////////////////////////////////////////////////////////////////////////////
DA.SetDataList("lines", lines); DA.SetDataList("layers", layerlist);
if (on_off == 1)
{
for (int i = 0; i < layerlist.Count; i++)
{
doc.Layers.Add(layerlist[i], Color.Black);
} //レイヤ生成
for (int e = 0; e < lines.Count; e++) //節点生成
{
var r1 = lines[e].From; var r2 = lines[e].To; var l1 = 10.0; var l2 = 10.0;
for (int i = 0; i < xyz.Count; i++)
{
l1 = Math.Min(l1, (xyz[i] - r1).Length);
}
if (l1 > 5e-3)
{
xyz.Add(r1);
}
for (int i = 0; i < xyz.Count; i++)
{
l2 = Math.Min(l2, (xyz[i] - r2).Length);
}
if (l2 > 5e-3)
{
xyz.Add(r2);
}
}
for (int e = 0; e < lines.Count; e++)//交差判定を行い交差部で要素分割する
{
var r1 = lines[e].From; var r2 = lines[e].To; var l0 = r2 - r1; var rc = new List <Point3d>(); var sec = sec_No[e];
var att = new ObjectAttributes();
att.SetUserString(secuserstring, sec.ToString());
for (int i = 0; i < userstrings.Count; i++)
{
if (uservalues[e][i] != "" && uservalues[e][i] != "rigid")
{
att.SetUserString(userstrings[i], uservalues[e][i]);
}
}
att.LayerIndex = layerindex[e] + 1;
for (int i = 0; i < xyz.Count; i++)
{
var l1 = xyz[i] - r1;
if (l1.Length > 5e-3 && (r2 - xyz[i]).Length > 5e-3)//線分上に節点がいるかどうかチェック
{
if ((l0 / l0.Length - l1 / l1.Length).Length < 1e-5 && l0.Length - l1.Length > 5e-3)
{
rc.Add(xyz[i]);
}
}
}
if (rc.Count != 0)
{
var llist = new List <double>();
for (int i = 0; i < rc.Count; i++)
{
llist.Add((rc[i] - r1).Length);
}
int[] idx = Enumerable.Range(0, rc.Count).ToArray <int>();//r1とr2の間の点のソート
Array.Sort <int>(idx, (a, b) => llist[a].CompareTo(llist[b]));
var obj = doc.Objects.AddLine(r1, rc[idx[0]], att);
for (int i = 0; i < idx.Length - 1; i++)
{
obj = doc.Objects.AddLine(rc[idx[i]], rc[idx[i + 1]], att);
}
obj = doc.Objects.AddLine(rc[idx[idx.Length - 1]], r2, att);
}
else
{
var obj = doc.Objects.AddLine(r1, r2, att);
}
}
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
const Rhino.DocObjects.ObjectType geometryFilter = Rhino.DocObjects.ObjectType.Point;
Rhino.Input.Custom.GetObject go = new Rhino.Input.Custom.GetObject();
go.SetCommandPrompt("Pick all the points that you want to change to reinforcement.");
go.GeometryFilter = geometryFilter;
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
bool bHavePreselectedObjects = false;
for (;;)
{
Rhino.Input.GetResult res = go.GetMultiple(1, 0);
/*
* if (res == Rhino.Input.GetResult.Option)
* {
* go.EnablePreSelect(false, true);
* continue;
* }
* else if (res != Rhino.Input.GetResult.Option)
* {
* return Rhino.Commands.Result.Cancel;
* }
*/
if (go.ObjectsWerePreselected)
{
bHavePreselectedObjects = true;
go.EnablePreSelect(false, true);
continue;
}
break;
}
List <Point3d> points = new List <Point3d>();
if (bHavePreselectedObjects)
{
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (null != rhinoObject)
{
rhinoObject.Select(false);
}
}
doc.Views.Redraw();
}
int layerIndex = getLayerIndex(doc, "Reinforcement");
doc.Layers[layerIndex].Color = Color.Black;
if (layerIndex == 999)
{
return(Result.Failure);
}
ObjRef[] objects = go.Objects();
foreach (ObjRef obj in objects)
{
Point3d point = obj.Point().Location;
//TODO add the functionality how to assign different steel materials.
Reinforcement reinf = new Reinforcement(ProjectPlugIn.Instance.CurrentBeam)
{
Material = new SteelMaterial("B500B", SteelType.Reinforcement, ProjectPlugIn.Instance.CurrentBeam),
Centroid = point,
Diameter = 8
};
ObjectAttributes attr = new ObjectAttributes();
attr.UserData.Add(reinf);
attr.SetUserString("Name", "Reinforcement");
attr.LayerIndex = layerIndex;
//Unused code to create a hatch around the point
/*
* doc.Objects.AddCurve(reinf.OutLine,attr);
* ObjectAttributes attrHatch = new ObjectAttributes();
* attrHatch.LayerIndex = layerIndex;
* doc.Objects.AddHatch(reinf.Hatch, attrHatch);
*/
doc.Objects.ModifyAttributes(obj, attr, true);
}
return(Result.Success);
}
