IProvider IProviderFactory.Create(string providerName)
{
if (providerName.ToLower() == "googleprovider")
{
return((IProvider)_dependencyResolver.GetService(typeof(GoogleProvider)));
}
if (providerName.ToLower() == "yahooprovider")
{
return((IProvider)_dependencyResolver.GetService(typeof(YahooProvider)));
}
return(null);
}
public void GetService_returns_null_when_type_not_registered()
{
var kernel = new StandardKernel();
var resolver = new NinjectDependencyResolver(kernel);
var result = resolver.GetService(typeof (IDateTime));
Assert.IsNull(result);
}
public void InitializeTest()
{
var dependencyResolver = new NinjectDependencyResolver(new string[] { "Infrastructure.Tests" });
ILogger logger = null;
logger = dependencyResolver.GetService <ILogger>(LoggerType.File.ToString());
Assert.IsInstanceOf <FileLogger>(logger);
}
public void GetService_returns_instance_when_registered()
{
var kernel = new StandardKernel();
var resolver = new NinjectDependencyResolver(kernel);
kernel.Bind<IDateTime>().To<DateTimeAdapter>();
var result = resolver.GetService(typeof(IDateTime));
Assert.That(result, Is.TypeOf<DateTimeAdapter>());
}
public void GetService_returns_null_when_type_not_registered()
{
var kernel = new StandardKernel();
var resolver = new NinjectDependencyResolver(kernel);
var result = resolver.GetService(typeof(IDateTime));
Assert.IsNull(result);
}
public NCcodeList ImportFromFileTest()
{
string testpath = System.Environment.CurrentDirectory + @"\TestFiles\WRONG_NC";
NinjectDependencyResolver dd = new NinjectDependencyResolver();
NCcodeList ncls = new NCcodeList((IDBInfo)dd.GetService(typeof(IDBInfo)));
ncls.ImportFromFile(testpath);
Assert.AreNotEqual(ncls.NCList.Count(), 0);
return(ncls);
}
public void GetService_returns_instance_when_registered()
{
var kernel = new StandardKernel();
var resolver = new NinjectDependencyResolver(kernel);
kernel.Bind <IDateTime>().To <DateTimeAdapter>();
var result = resolver.GetService(typeof(IDateTime));
Assert.That(result, Is.TypeOf <DateTimeAdapter>());
}
private IUserService CreateUserService()
{
var serviceBag = (IServiceBag)resolver.GetService(typeof(IServiceBag));
return(serviceBag.UserService);
}
public void GetService_BindingDefined_ShouldReturnDefined()
{
Assert.IsInstanceOf <Class1>(_resolver.GetService(typeof(Intf1)));
}
private void button1_Click(object sender, EventArgs e)
{
//pointCoord test = new pointCoord("X;500");
string outputfolder = Program.InfoPath + productList1.listBox1.SelectedItem.ToString() + "\\NC\\COUPON\\";
localMethod.creatDir(outputfolder);
foreach (var cc in controlList.Values)
{
List <string> sb = new List <string>();
if (cc[1].ForeColor == Color.ForestGreen)
{
//获取试片文本
string coupontext = cc[0].Text;
var cptmp = coupontext.Split('/');
//获取试片编号
var cpmarkls = from dd in coupondt.AsEnumerable()
where dd["试片1"].ToString() == "C1-" + cptmp[0] && dd["试片2"].ToString() == "C1-" + cptmp[1]
select new {
cpno = dd["组合编号"].ToString(),
progUUID = dd["程序段编号"].ToString(),
progID = dd["ID"].ToString()
};
string cpmark;
if (cpmarkls.Count() > 0)
{
cpmark = cpmarkls.First().cpno;
}
else
{
cpmark = "NEW";
}
//选择“对号” 的tag
string mark = cc[1].Tag.ToString();
string folderpath = Program.InfoPath + "SAMPLE\\COUPON\\TAB\\" + mark + "\\";
pointCoordList ptls = new pointCoordList();
pointCoordList[] couponModel = new pointCoordList[3] {
new pointCoordList(folderpath + mark + "_upper.tab"),
new pointCoordList(folderpath + mark + "_lower.tab"),
new pointCoordList(folderpath + mark + "_middle.tab")
};
//判断一共有几种紧固件c[2]-c[4]
var fstcontrol = cc.Skip(2);
var fstlist = from ff in fstcontrol
where ff.Text != ""
select ff.Text;
foreach (string fstname in fstlist)
{
string fstnamemark = fstname;
//判断加工代码
string Mcode;
if (fstname.Contains("B020600"))
{
Mcode = "M62";
fstnamemark = fstname.Split('-')[0];
}
else
{
Mcode = "M60";
}
//Read the enter/out NC codes
string progfolder = Program.InfoPath + @"SAMPLE\COUPON\TAB\ENTER\";
Func <string, NCcodeList> openNCfile = delegate(string name)
{
//Type dd = typeof(NCcodeList);
//NCcodeList obj = (NCcodeList)dd.Assembly.CreateInstance(dd.FullName);
NinjectDependencyResolver dd = new NinjectDependencyResolver();
NCcodeList obj = new NCcodeList((IDBInfo)dd.GetService(typeof(IDBInfo)));
obj.ImportFromFile(progfolder + name);
obj.NCList.RemoveRange(0, 2);
obj.NCList.RemoveRange(obj.NCList.Count - 2, 2);
return(obj);
};
string beginProg;
string enterProg;
string outProg;
string endProg;
List <string> beginNC;
List <string> enterNC;
List <string> outNC;
List <string> endNC;
if (mark.Contains("left"))
{
beginProg = "M98 P3601";
beginNC = openNCfile("BEGIN_LEFT").NCList;
enterProg = "M98 P3602";
enterNC = openNCfile("ENTER_LEFT").NCList;
outProg = "M98 P3603";
outNC = openNCfile("OUT_LEFT").NCList;
endProg = "M98 P3604";
endNC = openNCfile("END_LEFT").NCList;
}
else
{
beginProg = "M98 P3701";
beginNC = openNCfile("BEGIN_RIGHT").NCList;
enterProg = "M98 P3702";
enterNC = openNCfile("ENTER_RIGHT").NCList;
outProg = "M98 P3703";
outNC = openNCfile("OUT_RIGHT").NCList;
endProg = "M98 P3704";
endNC = openNCfile("END_RIGHT").NCList;
}
string progID;
var cpmarkls2 = cpmarkls.Where(x => x.progUUID.Contains(fstnamemark));
if (cpmarkls2.Count() > 0)
{
progID = cpmarkls2.First().progID;
}
else
{
progID = "NEW";
}
// sb.Add("%");
string Ocode = "O" + productList1.listBox1.SelectedItem.ToString().Split('_')[1].Substring(3, 4) + progID.PadLeft(2, '0') + cpmark.Substring(1).PadLeft(2, '0');
string filename = progID + "_" + cpmark + "_" + fstname + "_" + cptmp[0] + "_" + cptmp[1] + "_" + mark.ToUpper();
sb.Add("(MSG, START COUPON TEST:" + filename + ")");
////下铆头降到最低
//sb.Add("M53");
////所有传感器关闭
//sb.Add("M51");
//// 取消传感器补偿清除传感器在点位模式下创建的坐标补偿
//sb.Add("M26");
////取消视觉修正补偿清除视觉修正导致的XY坐标补偿
//sb.Add("M35");
//进入程序代码
//校准工装用的代码
sb.Add("(MSG, IF YOU ARE AT INSPECTION LOCATION THEN IGNORE NEXT STATEMENT)");
sb.Add("(MSG, BEGIN ENTER)");
sb.AddRange(beginNC);
sb.AddRange(enterNC);
sb.Add("(MSG, END ENTER)");
//获取换刀用的T代码
sb.Add("M56" + fstenerT[fstname]);
//更换钻头工位
sb.Add("M83T0");
//更换上铆头工位
sb.Add("M83T100");
//准备注胶循环
sb.Add("M83T100");
//试片上升
sb.Add(couponModel[0][0].Offset("Z;40;W;40;").ToString());
//处理Upper 及Lower位置
//取得第一个点并校准
sb.Add("M34T1");
sb.Add(couponModel[0][0].ToString());
sb.Add("M51");
sb.Add("M50T00");
sb.Add("M39");
sb.Add("M31");
//下铆头上升
sb.Add("M57T300");
//校准通过(该位置无紧固件)则进行铆接
sb.Add(Mcode);
for (int i = 1; i < 21; i++)
{
sb.Add("M34T1");
sb.Add(couponModel[0][i].ToString());
sb.Add("M39");
sb.Add("M31");
sb.Add(Mcode);
}
//下铆头下降
sb.Add("M57T4000");
//试片下降
sb.Add("(MSG, COUPON FIXTURE WILL GO UP AND MOVE TO NEXT LINE TO INSTALL FASTERNERS)");
sb.Add(couponModel[0][20].Offset("Z;40;W;40;").ToString());
//进行lower铆接
//添加走回工装校准点校准的脚本
//板子上升
sb.Add(couponModel[1][0].Offset("Z;40;W;40;").ToString());
//取得第一个点并校准
sb.Add("M34T1");
sb.Add(couponModel[1][0].ToString());
sb.Add("M51");
sb.Add("M50T00");
sb.Add("M39");
sb.Add("M31");
//下铆头上升
sb.Add("M57T300");
//校准通过(该位置无紧固件)则进行铆接
sb.Add(Mcode);
for (int i = 1; i < 21; i++)
{
sb.Add("M34T1");
sb.Add(couponModel[1][i].ToString());
sb.Add("M39");
sb.Add("M31");
sb.Add(Mcode);
}
sb.Add("(MSG, START DRILL HOLES ON COUPONS)");
//开始钻孔操作
Mcode = "M61";
//下铆头下降
sb.Add("M57T4000");
//试片下降
sb.Add("(MSG, COUPON FIXTURE WILL GO UP AND MOVE TO NEXT LINE TO INSTALL FASTERNERS)");
sb.Add(couponModel[1][20].Offset("Z;40;W;40;").ToString());
sb.Add(couponModel[2][0].Offset("Z;40;W;40;").ToString());
//取得第一个点并校准
sb.Add("M34T1");
sb.Add(couponModel[2][0].ToString());
sb.Add("M51");
sb.Add("M50T00");
sb.Add("M39");
sb.Add("M31");
//下铆头上升
sb.Add("M57T300");
//校准通过(该位置无紧固件)则进行加工
sb.Add(Mcode);
for (int i = 1; i < 21; i++)
{
sb.Add("M34T1");
sb.Add(couponModel[2][i].ToString());
sb.Add("M39");
sb.Add("M31");
sb.Add(Mcode);
}
//下铆头下降
sb.Add("M57T4000");
//试片降低
sb.Add(couponModel[2][20].Offset("Z;40;W;40;").ToString());
sb.Add("(MSG, END COUPON TEST:" + filename + ")");
sb.Add("(MSG, NOW OUT THE FIXTURE)");
sb.AddRange(outNC);
sb.Add("(MSG, IF YOU WANT TO CONTINUE COUPON TEST THEN SKIP NEXT STATEMENT)");
sb.AddRange(endNC);
// sb.Add("%");
//输出文件至目录
int m = 0;
var outputNC = sb.ConvertAll(x => "N" + ((++m) * 2).ToString() + " " + x);
outputNC.Insert(0, "%");
outputNC.Insert(1, Ocode);
outputNC.Insert(outputNC.Count - 1, "%");
outputNC.WriteFile(outputfolder + filename);
}
}
}
//复制进出程序至输出目录
List <FileInfo> en = new List <FileInfo>();
en.WalkTree(Program.InfoPath + @"SAMPLE\COUPON\TAB\ENTER\", false);
en.copyto(outputfolder);
System.Diagnostics.Process.Start("explorer.exe", outputfolder);
}