public static void SessionSetupRequest(
ModelConnectionId connectionId,
ModelSessionId sessionId,
ModelSessionId previousSessionId,
ModelSigned signed,
ModelFlags flags,
ModelUser user,
ModelAllowReauthentication ReAuthentication)
{
VerifyConnection(connectionId);
Condition.IsNull(ConnectionList[connectionId].Request);
#region Combinations
Combination.NWise(1, connectionId, sessionId, previousSessionId, signed, flags, user);
#endregion
#region Other contraints
// Do not estabilish 2nd session if no session exist yet
Condition.IfThen(GlobalSessionTable.Count == 0,
sessionId != ModelSessionId.AlternativeSessionId &&
user == ModelUser.DefaultUser);
// Do not establish new session if there's one in the requested connection
Condition.IfThen(ConnectionList[connectionId].Session != null, sessionId != ModelSessionId.ZeroSessionId);
// Do not establish new session if 2 sessions exist
Condition.IfThen(GlobalSessionTable.Count == 2, sessionId != ModelSessionId.ZeroSessionId);
// Do not set previousSessionId to session1 if currently establish session1
Condition.IfThen(GlobalSessionTable.Count == 0 &&
sessionId == ModelSessionId.ZeroSessionId,
previousSessionId != ModelSessionId.MainSessionId);
// If session id is zero, it's the same that the binding flag is set or not.
Condition.IfThen(sessionId == ModelSessionId.ZeroSessionId, flags == ModelFlags.NotBinding);
// Restrict the condition to no session exist yet as we only simulate one session in this Model
Condition.IsNull(ConnectionList[connectionId].Session);
// If we need to skip SessionSetup when it's re-auth an existing one
if (ReAuthentication == ModelAllowReauthentication.NotAllowReauthentication)
{
Condition.IsTrue(ConnectionList[connectionId].Session == null ||
ConnectionList[connectionId].Session.State != ModelSessionState.Valid);
}
#endregion
ConnectionList[connectionId].Request = new ModelSessionSetupRequest(
connectionId,
sessionId,
previousSessionId,
signed == ModelSigned.SignFlagSet,
flags,
user);
}
public void SessionSetupRequest(
ModelConnectionId connectionId,
ModelSessionId sessionId,
ModelSessionId previousSessionId,
ModelSigned signed,
ModelFlags flags,
ModelUser user,
ModelAllowReauthentication ReAuthentication)
{
ulong adapterSessionId;
ulong adapterPreviousSessionId;
Packet_Header_Flags_Values headerFlags;
SESSION_SETUP_Request_Flags sessionSetupFlags;
AccountCredential credential;
#region sessionId
if (sessionTable.ContainsKey(sessionId))
{
adapterSessionId = sessionTable[sessionId];
// For sessionId is 0 which indicates session creation
// assign a new one
if (sessionId == ModelSessionId.ZeroSessionId)
{
if (!sessionTable.ContainsKey(ModelSessionId.MainSessionId))
{
sessionId = ModelSessionId.MainSessionId;
}
else if (!sessionTable.ContainsKey(ModelSessionId.AlternativeSessionId))
{
sessionId = ModelSessionId.AlternativeSessionId;
}
}
}
else
{
Random r = new Random();
adapterSessionId = (ulong)r.Next(1, int.MaxValue);
}
Site.Log.Add(
LogEntryKind.Debug,
"ModelSessionId: {0}, AdapterSessionId: 0x{1:x8}",
sessionId, adapterSessionId);
#endregion
#region previousSessionId
if (sessionTable.ContainsKey(previousSessionId))
{
adapterPreviousSessionId = sessionTable[previousSessionId];
}
else
{
Random r = new Random();
adapterPreviousSessionId = (ulong)r.Next(1, int.MaxValue);
}
Site.Log.Add(
LogEntryKind.Debug,
"ModelSessionId: {0}, adapterPreviousSessionId: 0x{1:x8}",
sessionId, adapterPreviousSessionId);
#endregion
#region isSigned
headerFlags = (signed == ModelSigned.SignFlagSet) ? Packet_Header_Flags_Values.FLAGS_SIGNED : Packet_Header_Flags_Values.NONE;
#endregion
#region flags
switch (flags)
{
case ModelFlags.Binding:
{
sessionSetupFlags = SESSION_SETUP_Request_Flags.SESSION_FLAG_BINDING;
break;
}
case ModelFlags.NotBinding:
{
sessionSetupFlags = SESSION_SETUP_Request_Flags.NONE;
break;
}
default:
throw new ArgumentException("flags");
}
#endregion
#region user
switch (user)
{
case ModelUser.DefaultUser:
{
credential = testConfig.AccountCredential;
break;
}
case ModelUser.DiffUser:
{
credential = testConfig.NonAdminAccountCredential;
break;
}
default:
throw new ArgumentException("user");
}
#endregion
#region MultipleChannel
// Multiple Channel only takes affect when Connection.Dialect belongs to the SMB 3.x dialect family
bool isMultipleChannelSupported = sessionMgmtConfig.IsMultiChannelCapable && ModelUtility.IsSmb3xFamily(connectionList[connectionId].Dialect);
#endregion
PrintCurrentSessionTable("Before SessionSetup Request");
#region Send Request
uint status;
SESSION_SETUP_Response? sessionSetupResponse = null;
string serverName = testConfig.SutComputerName;
SecurityPackageType securityPackageType = testConfig.DefaultSecurityPackage;
bool useServerGssToken = testConfig.UseServerGssToken;
// Use desired explored sessionId
ulong oldSessionId = connectionList[connectionId].SessionId;
connectionList[connectionId].SessionId = adapterSessionId;
// alternative connection and never session setup
if (connectionId == ModelConnectionId.AlternativeConnection
&& sessionId == ModelSessionId.MainSessionId
&& connectionList[connectionId].SessionKey == null
&& connectionList.ContainsKey(ModelConnectionId.MainConnection))
{
connectionList[connectionId].GenerateCryptoKeys(testConfig.SendSignedRequest, false, connectionList[ModelConnectionId.MainConnection], true);
}
status = connectionList[connectionId].SessionSetup(
headerFlags,
sessionSetupFlags,
adapterPreviousSessionId,
securityPackageType,
serverName,
credential,
useServerGssToken,
isMultipleChannelSupported,
(header, response) =>
{
sessionSetupResponse = response;
});
if (status != Smb2Status.STATUS_SUCCESS
&& status != Smb2Status.STATUS_MORE_PROCESSING_REQUIRED)
{
// Restore original sessionId if request failed
connectionList[connectionId].SessionId = oldSessionId;
}
#endregion
// Insert session to session table
if (!sessionTable.ContainsKey(sessionId)
&& (status == Smb2Status.STATUS_SUCCESS
|| status == Smb2Status.STATUS_MORE_PROCESSING_REQUIRED))
{
sessionTable.Add(sessionId, connectionList[connectionId].SessionId);
}
PrintCurrentSessionTable("After SessionSetup Request");
SessionSetupResponse((ModelSmb2Status)status, connectionId, sessionMgmtConfig);
}
public void SessionSetupRequest(
ModelConnectionId connectionId,
ModelSessionId sessionId,
ModelSessionId previousSessionId,
ModelSigned signed,
ModelFlags flags,
ModelUser user,
ModelAllowReauthentication ReAuthentication)
{
ulong adapterSessionId;
ulong adapterPreviousSessionId;
Packet_Header_Flags_Values headerFlags;
SESSION_SETUP_Request_Flags sessionSetupFlags;
AccountCredential credential;
#region sessionId
if (sessionTable.ContainsKey(sessionId))
{
adapterSessionId = sessionTable[sessionId];
// For sessionId is 0 which indicates session creation
// assign a new one
if (sessionId == ModelSessionId.ZeroSessionId)
{
if (!sessionTable.ContainsKey(ModelSessionId.MainSessionId))
{
sessionId = ModelSessionId.MainSessionId;
}
else if (!sessionTable.ContainsKey(ModelSessionId.AlternativeSessionId))
{
sessionId = ModelSessionId.AlternativeSessionId;
}
}
}
else
{
Random r = new Random();
adapterSessionId = (ulong)r.Next(1, int.MaxValue);
}
Site.Log.Add(
LogEntryKind.Debug,
"ModelSessionId: {0}, AdapterSessionId: 0x{1:x8}",
sessionId, adapterSessionId);
#endregion
#region previousSessionId
if (sessionTable.ContainsKey(previousSessionId))
{
adapterPreviousSessionId = sessionTable[previousSessionId];
}
else
{
Random r = new Random();
adapterPreviousSessionId = (ulong)r.Next(1, int.MaxValue);
}
Site.Log.Add(
LogEntryKind.Debug,
"ModelSessionId: {0}, adapterPreviousSessionId: 0x{1:x8}",
sessionId, adapterPreviousSessionId);
#endregion
#region isSigned
headerFlags = (signed == ModelSigned.SignFlagSet) ? Packet_Header_Flags_Values.FLAGS_SIGNED : Packet_Header_Flags_Values.NONE;
#endregion
#region flags
switch (flags)
{
case ModelFlags.Binding:
{
sessionSetupFlags = SESSION_SETUP_Request_Flags.SESSION_FLAG_BINDING;
break;
}
case ModelFlags.NotBinding:
{
sessionSetupFlags = SESSION_SETUP_Request_Flags.NONE;
break;
}
default:
throw new ArgumentException("flags");
}
#endregion
#region user
switch (user)
{
case ModelUser.DefaultUser:
{
credential = testConfig.AccountCredential;
break;
}
case ModelUser.DiffUser:
{
credential = testConfig.NonAdminAccountCredential;
break;
}
default:
throw new ArgumentException("user");
}
#endregion
#region MultipleChannel
// Multiple Channel only takes affect when Connection.Dialect belongs to the SMB 3.x dialect family
bool isMultipleChannelSupported = sessionMgmtConfig.IsMultiChannelCapable && ModelUtility.IsSmb3xFamily(connectionList[connectionId].Dialect);
#endregion
PrintCurrentSessionTable("Before SessionSetup Request");
#region Send Request
uint status;
SESSION_SETUP_Response?sessionSetupResponse = null;
string serverName = testConfig.SutComputerName;
SecurityPackageType securityPackageType = testConfig.DefaultSecurityPackage;
bool useServerGssToken = testConfig.UseServerGssToken;
// Use desired explored sessionId
ulong oldSessionId = connectionList[connectionId].SessionId;
connectionList[connectionId].SessionId = adapterSessionId;
// alternative connection and never session setup
if (connectionId == ModelConnectionId.AlternativeConnection &&
sessionId == ModelSessionId.MainSessionId &&
connectionList[connectionId].SessionKey == null &&
connectionList.ContainsKey(ModelConnectionId.MainConnection))
{
connectionList[connectionId].GenerateCryptoKeys(testConfig.SendSignedRequest, false, connectionList[ModelConnectionId.MainConnection], true);
}
status = connectionList[connectionId].SessionSetup(
headerFlags,
sessionSetupFlags,
adapterPreviousSessionId,
securityPackageType,
serverName,
credential,
useServerGssToken,
isMultipleChannelSupported,
(header, response) =>
{
sessionSetupResponse = response;
});
if (status != Smb2Status.STATUS_SUCCESS &&
status != Smb2Status.STATUS_MORE_PROCESSING_REQUIRED)
{
// Restore original sessionId if request failed
connectionList[connectionId].SessionId = oldSessionId;
}
#endregion
// Insert session to session table
if (!sessionTable.ContainsKey(sessionId) &&
(status == Smb2Status.STATUS_SUCCESS ||
status == Smb2Status.STATUS_MORE_PROCESSING_REQUIRED))
{
sessionTable.Add(sessionId, connectionList[connectionId].SessionId);
}
PrintCurrentSessionTable("After SessionSetup Request");
SessionSetupResponse((ModelSmb2Status)status, connectionId, sessionMgmtConfig);
}
