public JointAxis(SldWorks swApp, AssemblyDoc asm, StorageModel swData, string path, Joint current, int index, RobotModel robot)
{
this.swApp = swApp;
this.asmDoc = asm;
this.modelDoc = (ModelDoc2)asm;
this.swData = swData;
this.path = path;
this.owner = current;
this.robot = robot;
this.AxisIndex = index;
if (EffortLimit == 0)
{
this.EffortLimit = 1;
}
if (this.VelocityLimit == 0)
{
this.VelocityLimit = 1;
}
if (Axis != null)
{
CalcAxisVectors();
//CalcLimits(null);
}
if (index == 2)
{
IsContinuous = true;
}
}
public DocumentEventHandler(ModelDoc2 modDoc, SwAddin addin)
{
Document = modDoc;
UserAddin = addin;
SwApp = UserAddin.SwApp;
OpenModelViews = new Hashtable();
}
public DocumentEventHandler(ModelDoc2 modDoc, SwAddin addin)
{
document = modDoc;
userAddin = addin;
iSwApp = (ISldWorks)userAddin.SwApp;
openModelViews = new Hashtable();
}
public AssemblyEventHandler(ModelDoc2 modDoc, SwAddin addin)
: base(modDoc, addin)
{
doc = (AssemblyDoc)document;
swModel = modDoc;
swAddin = addin;
}
internal static void AddModelToList(SwAddin mSwAddin, ModelDoc2 newModel)
{
List<ModelDoc2> fM = null;
string xNameOfAss = mSwAddin.GetXNameForAssembly(false, Path.GetFileNameWithoutExtension(mSwAddin.SwModel.GetPathName()));
#region Проверка на наличие модели,которая была удалена
var checkList = new List<ModelDoc2>();
if (!DictionaryListMdb.ContainsKey(xNameOfAss))
DictionaryListMdb.Add(xNameOfAss, new List<ModelDoc2>());
foreach (var m in DictionaryListMdb[xNameOfAss])
{
try
{
m.GetPathName();
checkList.Add(m);
}
catch (COMException)
{
continue;
}
}
#endregion
if (!checkList.Contains(newModel))
CheckMdbForDecors(mSwAddin, newModel, checkList, null, fM);
DictionaryListMdb[xNameOfAss] = checkList;
}
/// <summary>
/// Sets the current robot that is linked to this page
/// </summary>
/// <param name="robot">robot to be used</param>
/// <param name="model">model to be used</param>
public void setRobot(RobotModel robot, ModelDoc2 model)
{
this.robot = robot;
robotName.Text = robot.Name;
string[] configurations = model.GetConfigurationNames();
IncludeFRCfieldBox.Visible = PluginSettings.UseFRCsim;
if (PluginSettings.UseFRCsim)
{
switch (robot.FRCfield)
{
case 2014:
FRC2014FieldButton.Checked = true;
break;
case 2015:
FRC2015FieldButton.Checked = true;
break;
default:
NoFieldButton.Checked = true;
break;
}
}
if (robot.ExportType == 0)
SDFExportTypeButton.Checked = true;
else
URDFExportTypeButton.Checked = true;
}
public frmFullPrice(ModelDoc2 model)
{
InitializeComponent();
CurrentState = State.ErrorsHide;
this.model = model;
}
public frmCopyProject(SwAddin swAdd,ISldWorks iswApp,ModelDoc2 rootModel,string openFile)
{
_swAdd = swAdd;
_iswApp = iswApp;
_swModelDoc = rootModel;
_openFile = openFile;
InitializeComponent();
WarningLabel.Text = string.Empty;
}
public KitchenModule(ModelDoc2 _rootModel, Component2 _swRootComponent, SwAddin _swAddin, ModelDoc2 _swModel)
{
RootModel = _rootModel;
swRootComponent = _swRootComponent;
measure = RootModel.Extension.CreateMeasure();
swAddin = _swAddin;
swModel = _swModel;
rootName = Path.GetFileNameWithoutExtension(RootModel.GetPathName());
}
public FrmReplaceComponents(SwAddin swAddin, Component2[] selComps)
{
InitializeComponent();
_mSwAddin = swAddin;
_mSelComps = selComps;
_swModel = (ModelDoc2)_mSwAddin.SwApp.ActiveDoc;
Show();
}
public void TestLoadSWComponentsList(string modelName)
{
ModelDoc2 doc = OpenSWDocument(modelName);
AssemblyDoc assyDoc = (AssemblyDoc)doc;
LinkNode baseNode = Serialization.LoadBaseNodeFromModel(SwApp, doc, out bool abortProcess);
Assert.False(abortProcess);
List <Component2> components = Common.LoadSWComponents(doc, baseNode.Link.SWComponentPIDs);
Assert.Equal(baseNode.Link.SWComponentPIDs.Count, components.Count);
SwApp.CloseAllDocuments(true);
}
public void TestSaveSWComponentsList(string modelName)
{
ModelDoc2 doc = OpenSWDocument(modelName);
AssemblyDoc assyDoc = (AssemblyDoc)doc;
object[] componentObjs = assyDoc.GetComponents(false);
List <Component2> components = componentObjs.Cast <Component2>().ToList();
List <byte[]> pids = Common.SaveSWComponents(doc, components);
Assert.Equal(pids.Count, components.Count);
SwApp.CloseAllDocuments(true);
}
/// <summary>
/// Creates a new Specific Joint object
/// </summary>
/// <param name="joint">The joint that this joint is in</param>
/// <param name="path">The storage path for this joint</param>
protected JointSpecifics(Joint joint, string path)
{
this.robot = RobotInfo.Robot;
this.joint = joint;
this.swApp = RobotInfo.SwApp;
this.modelDoc = RobotInfo.ModelDoc;
this.swData = RobotInfo.SwData;
this.path = path;
OriginValues = new OriginPoint();
if(OriginPt != null)
OriginValues.Point = GetPointFromEntity(OriginPt);
}
/// <summary>
/// 获取当前激活文档的文件名
/// </summary>
/// <returns></returns>
public static string GetActiveDocName()
{
StartSW();
ModelDoc2 swDoc = swApp.ActiveDoc;
if (swDoc == null)
{
return("error");
}
string fileName = swDoc.GetPathName();
return(fileName);
}
public void OpenInExplorer()
{
ModelDoc2 swModel = iSwApp.ActiveDoc;
string swModelPath = swModel.GetPathName();
swModelPath = "/select, " + swModelPath;
System.Diagnostics.Process Process = new System.Diagnostics.Process();
Process.StartInfo.UseShellExecute = true;
Process.StartInfo.FileName = @"explorer";
Process.StartInfo.Arguments = swModelPath;
Process.Start();
}
private void btnPack_Click(object sender, EventArgs e)
{
ISldWorks swApp = Utility.ConnectToSolidWorks();
ModelDoc2 swModel = swApp.ActiveDoc;
//CopySolidworksFile(txtFrom.Text, txtTo.Text, "", "");
progressBarCopy.Value = 5;
CopySolidworksFile(txtFrom.Text, txtTo.Text);
progressBarCopy.Value = 100;
MessageBox.Show("操作完成");
progressBarCopy.Value = 0;
}
private void createPart()
{
swDoc = null;
int longstatus = 0;
swDoc = ((ModelDoc2)(sldApp.NewDocument("C:\\ProgramData\\SOLIDWORKS\\SOLIDWORKS 2016\\templates\\Part.prtdot", 0, 0, 0)));
sldApp.ActivateDoc2("Part2", false, ref longstatus);
swDoc = ((ModelDoc2)(sldApp.ActiveDoc));
ModelView myModeview = null;
myModeview = ((ModelView)(swDoc.ActiveView));
myModeview.FrameState = ((int)(swWindowState_e.swWindowMaximized));
}
public void AttachEventsToAllDocuments()
{
ModelDoc2 modDoc = (ModelDoc2)iSwApp.GetFirstDocument();
while (modDoc != null)
{
if (!openDocs.Contains(modDoc))
{
AttachModelDocEventHandler(modDoc);
}
modDoc = (ModelDoc2)modDoc.GetNext();
}
}
/// <summary>
/// 模型打包
/// </summary>
/// <param name="suffix">后缀</param>
/// <param name="swApp">SW程序</param>
/// <param name="modelPath">模型地址</param>
/// <param name="itemPath">目标地址</param>
/// <returns></returns>
public static string PackAndGoFunc(string suffix, SldWorks swApp, string modelPath, string itemPath)
{
swApp.CommandInProgress = true;
int warnings = 0;
int errors = 0;
ModelDoc2 swModelDoc = default(ModelDoc2);
ModelDocExtension swModelDocExt = default(ModelDocExtension);
PackAndGo swPackAndGo = default(PackAndGo);
//打开需要pack的模型
swModelDoc = (ModelDoc2)swApp.OpenDoc6(modelPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
swModelDocExt = (ModelDocExtension)swModelDoc.Extension;
swPackAndGo = (PackAndGo)swModelDocExt.GetPackAndGo();
// Get number of documents in assembly
//namesCount = swPackAndGo.GetDocumentNamesCount();
//Debug.Print(" Number of model documents: " + namesCount);
// Include any drawings, SOLIDWORKS Simulation results, and SOLIDWORKS Toolbox components
swPackAndGo.IncludeDrawings = false;
swPackAndGo.IncludeSimulationResults = false;
swPackAndGo.IncludeToolboxComponents = false;
// Set folder where to save the files,目标存放地址
swPackAndGo.SetSaveToName(true, itemPath);
//将文件展开到一个文件夹内，不要原始模型的文件夹结构
// Flatten the Pack and Go folder structure; save all files to the root directory
swPackAndGo.FlattenToSingleFolder = true;
// Add a prefix and suffix to the filenames
//swPackAndGo.AddPrefix = "SW_";添加后缀
swPackAndGo.AddSuffix = "_" + suffix;
try
{
// Pack and Go，执行PackAndGo
swModelDocExt.SavePackAndGo(swPackAndGo);
}
catch (Exception ex)
{
throw new Exception("PackandGo过程中出现异常：" + ex.Message);
}
finally
{
swApp.CloseDoc(swModelDoc.GetTitle());
swModelDoc = null;
swApp.CommandInProgress = false;//及时关闭外部命令调用，否则影响SolidWorks的使用
}
string modelPathName = modelPath.Substring(modelPath.LastIndexOf(@"\") + 1);
//返回packandgo后模型的地址
return(itemPath + @"\" + modelPathName.Substring(0, modelPathName.LastIndexOf(".")) + "_" + suffix + ".sldasm");
}
private void button1_Click(object sender, EventArgs e)
{
if (pictureBox1.Image != null)
{
pictureBox1.Image.Dispose();
pictureBox1.Image = null;
pictureBox1.Load();
pictureBox1.Update();
}
SldWorks sw = new SldWorks();
sw.Visible = true;
int err = 0, war = 0;
ModelDoc2 swModel = sw.OpenDoc6(Application.StartupPath + "\\cylinder.sldprt", 1, 0, "", ref err, ref war);
double[] props = swModel.GetMassProperties();
textBox1.Text = props[5].ToString();
IRayTraceRenderer swRayTraceRenderer = sw.GetRayTraceRenderer(1);
if (swRayTraceRenderer == null)
{
int fileerror = sw.LoadAddIn("PhotoView 360");
swRayTraceRenderer = sw.IGetRayTraceRenderer(1);
}
RayTraceRendererOptions swRayTraceRenderOptions = swRayTraceRenderer.RayTraceRendererOptions;
textBox2.Clear();
textBox2.Text += "Current rendering values";
textBox2.Text += System.Environment.NewLine + "ImageWidth = " + (swRayTraceRenderOptions.ImageWidth);
textBox2.Text += System.Environment.NewLine + "ImageFormat = " + (swRayTraceRenderOptions.ImageFormat);
textBox2.Text += System.Environment.NewLine + "ImageHeight = " + (swRayTraceRenderOptions.ImageHeight);
textBox2.Text += System.Environment.NewLine + "PreviewRenderQuality = " + (swRayTraceRenderOptions.PreviewRenderQuality);
textBox2.Text += System.Environment.NewLine + "FinalRenderQuality = " + (swRayTraceRenderOptions.FinalRenderQuality);
textBox2.Text += System.Environment.NewLine + "BloomEnabled = " + (swRayTraceRenderOptions.BloomEnabled);
textBox2.Text += System.Environment.NewLine + "BloomThreshold = " + (swRayTraceRenderOptions.BloomThreshold);
textBox2.Text += System.Environment.NewLine + "BloomRadius = " + (swRayTraceRenderOptions.BloomRadius);
textBox2.Text += System.Environment.NewLine + "ContourEnabled = " + (swRayTraceRenderOptions.ContourEnabled);
textBox2.Text += System.Environment.NewLine + "ShadedContour = " + (swRayTraceRenderOptions.ShadedContour);
textBox2.Text += System.Environment.NewLine + "ContourLineThickness = " + (swRayTraceRenderOptions.ContourLineThickness);
textBox2.Text += System.Environment.NewLine + "ContourLineColor = " + (swRayTraceRenderOptions.ContourLineColor);
bool status = swRayTraceRenderer.RenderToFile(Application.StartupPath + "./lter_1.jpg", 0, 0);
status = swRayTraceRenderer.CloseRayTraceRender();
pictureBox1.Load(Application.StartupPath + "./lter_1.jpg");
}
private void ExportButtonClick(object sender, EventArgs e)
{
swModelDoc = swApp.ActiveDoc;
swModelDocExt = swModelDoc.Extension;
swAssDoc = swApp.ActiveDoc as AssemblyDoc;
swFeat = (Feature)swModelDoc.FirstFeature();
swFeatMgr = (FeatureManager)swModelDoc.FeatureManager;
while ((swFeat != null))
{
sFeatType = swFeat.GetTypeName();
if (sFeatType == "CommentsFolder")
{
swCommentFolder = (CommentFolder)swFeat.GetSpecificFeature2();
nbrComments = swCommentFolder.GetCommentCount();
vComments = (object[])swCommentFolder.GetComments();
for (i = 0; i <= (nbrComments - 1); i++)
{
swComment = (Comment)vComments[i];
string name = swComment.Name;
Component2 comp = swAssDoc.GetComponentByName(name);
swModelDocExt.SelectByID2(comp.GetSelectByIDString(), "COMPONENT", 0, 0, 0, false, 0, null, 0);
swAssDoc.HideComponent();
}
for (i = 0; i <= (nbrComments - 1); i++)
{
swComment = (Comment)vComments[i];
string name = swComment.Name;
Component2 comp = swAssDoc.GetComponentByName(name);
swModelDocExt.SelectByID2(comp.GetSelectByIDString(), "COMPONENT", 0, 0, 0, false, 0, null, 0);
swAssDoc.ShowComponent();
swModelDocExt.SetUserPreferenceString((int)swUserPreferenceStringValue_e.swFileSaveAsCoordinateSystem, (int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, "CoordinateSystem");
swModelDocExt.SaveAs("C:/Users/Izmar/Documents/vmpc_models/jan2018/stlexport/" + swComment.Text + ".STL", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, 0, ref errors, ref warnings);
swAssDoc.HideComponent();
}
for (i = 0; i <= (nbrComments - 1); i++)
{
swComment = (Comment)vComments[i];
string name = swComment.Name;
Component2 comp = swAssDoc.GetComponentByName(name);
swModelDocExt.SelectByID2(comp.GetSelectByIDString(), "COMPONENT", 0, 0, 0, false, 0, null, 0);
swAssDoc.ShowComponent();
}
}
// Get next feature in FeatureManager design tree
swFeat = (Feature)swFeat.GetNextFeature();
}
}
//Finds the selected components and returns them, used when pulling the items from the selection box because it would be too hard
// for SolidWorks to allow you to access the selectionbox components directly.
public static void getSelectedComponents(ModelDoc2 model, List<Component2> Components, int Mark = -1)
{
SelectionMgr selectionManager = model.SelectionManager;
Components.Clear();
for (int i = 0; i < selectionManager.GetSelectedObjectCount2(Mark); i++)
{
object obj = selectionManager.GetSelectedObject6(i + 1, Mark);
Component2 comp = (Component2)obj;
if (comp != null)
{
Components.Add(comp);
}
}
}
//Except for an exclusionary list, this shows all the components
public static void showAllComponents(ModelDoc2 model, List<string> hiddenComponents)
{
AssemblyDoc assyDoc = (AssemblyDoc)model;
List<Component2> componentsToShow = new List<Component2>();
object[] varComps = assyDoc.GetComponents(false);
foreach (Component2 comp in varComps)
{
if (!hiddenComponents.Contains(comp.Name2))
{
componentsToShow.Add(comp);
}
}
showComponents(model, componentsToShow);
}
public void ClearProps(ModelDoc2 md)
{
CustomPropertyManager glP = md.Extension.get_CustomPropertyManager(string.Empty);
int res;
for (int i = 1; i <= Properties.Settings.Default.RevLimit; i++)
{
res = glP.Delete2("REVISION " + (char)(i + 65));
res = glP.Delete2("ECO " + i.ToString());
res = glP.Delete2("DESCRIPTION " + i.ToString());
res = glP.Delete2("LIST " + i.ToString());
res = glP.Delete2("DATE " + i.ToString());
}
}
public static List <object> GetSelectedFaces(SldWorks swApplication, ModelDoc2 swModel)
{
swModel = swApplication.ActiveDoc;
var swSafeEntityList = new List <object>();
var modelType = swModel.GetTitle();
var documentType = (swDocumentTypes_e)swModel.GetType();
if (documentType == swDocumentTypes_e.swDocPART)
{
var myPartDoc = (PartDoc)swModel;
Array myBodyVar = myPartDoc.GetBodies2((int)swBodyType_e.swAllBodies, true);
int myBodyCount = 0;
for (myBodyCount = myBodyVar.GetLowerBound(0); myBodyCount <= myBodyVar.GetUpperBound(0); myBodyCount++)
{
var myBodyComparison = (Body2)myBodyVar.GetValue(myBodyCount);
var swFace = (Face2)myBodyComparison.GetFirstFace();
while (swFace != null)
{
var idNode = swFace.GetHashCode();
swFace.SetFaceId(idNode);
swFace = swFace.GetNextFace();
}
}
var mySelManager = (SelectionMgr)swModel.SelectionManager;
var selectionCount = mySelManager.GetSelectedObjectCount2(-1);
//swApplication.SendMsgToUser("Numero oggetti selezionati " + selectionCount.ToString());
for (int i = 0; i < selectionCount; i++)
{
var myFace = (Face2)mySelManager.GetSelectedObject6(i + 1, -1);
// var idNode = myFace.GetHashCode();
// myFace.SetFaceId(idNode);
var swEntity = ((Entity)myFace).GetSafeEntity();
var swSafeEntity = (Entity)swEntity.GetSafeEntity();
swSafeEntityList.Add(swSafeEntity);
}
}
//var listFace = new List<Face2>();
//swApplication.SendMsgToUser("Lista facce " + listFace.Count.ToString());
//foreach (Face2 face2 in listFace)
//{
// swApplication.SendMsgToUser("Id: " + face2.GetFaceId().ToString());
//}
//ColorFace.KLColorFace(listFace, swApplication);
return(swSafeEntityList);
}
private void Window_KeyDown(object sender, KeyEventArgs e)
{
if (e.Key == Key.Escape)
{
this.Close();
}
else if (e.Key == Key.S && e.KeyboardDevice.IsKeyDown(Key.LeftCtrl))
{
SaveAll();
}
else if (e.Key == Key.F5)
{
SwModel = (ModelDoc2)SwApp.ActiveDoc;
if (SwModel != null)
{
if (((int)SwModel.GetType() != (int)swDocumentTypes_e.swDocPART) && ((int)SwModel.GetType() != (int)swDocumentTypes_e.swDocASSEMBLY))
{
MessageBox.Show("当前文件不是零件或装配体文件！");
Environment.Exit(0);
}
}
else
{
MessageBox.Show("请打开零件或装配体文件！");
Environment.Exit(0);
}
SwConfigMgr = SwModel.ConfigurationManager;
SwModelExt = SwModel.Extension;
SwCustPropMgr = SwModelExt.get_CustomPropertyManager("");
string[] configNames = null;
configNames = (string[])SwModel.GetConfigurationNames();
CboxConfigName.Items.Clear();
for (int i = 0; i < configNames.Length; i++)
{
CboxConfigName.Items.Add(configNames[i]);
if (configNames[i].Contains(SwConfigMgr.ActiveConfiguration.Name))
{
CboxConfigName.Text = SwConfigMgr.ActiveConfiguration.Name;
}
}
DatePickerDesignDate.SelectedDate = DateTime.Today;
TextColorReset();
TextBlock.Text = "已成功连接到SolidWorks文件! 按F5重新载入!";
}
}
private void traverse(Component2 comp)
{
object[] childrens = comp.GetChildren();
foreach (Component2 child in childrens)
{
traverse(child);
}
ModelDoc2 mdocChild = comp.GetModelDoc2();
if (mdocChild.GetType() == 1)
{
// Bezeichnung kann über 2 Möglichkeiten erfolgen
// Dateiname (mit GetFileName wird nur der Dateiname aus einem Dateipfad extrahiert
string entry = System.IO.Path.GetFileName(comp.GetPathName());
// oder
string entry2 = comp.Name2;
//entfernen der 2 hinteren Zeichen im String
entry2 = entry2.Remove(entry2.Length - 2);
int Row = 0;
// überprüfen, ob aktueller Eintrag bereits vorhanden ist, wenn ja Zeilen-Index speichern
for (int i = 2; i < index; i++)
{
if ((string)exlSheet.Cells[i, 3].Value2 == entry)
{
Row = i;
}
}
// wenn Zeilen Index gesetzt wurde, Wert für Anzahl aus Zeile lesen und um 1 erhöhen
// erhöhten Wert in Zelle schreiben
if (Row > 0)
{
double newCount = (double)exlSheet.Cells[Row, 1].Value2 + 1;
exlSheet.Cells[Row, 1] = newCount;
}
else
{
// Wenn ZeilenIndex nicht gesetzt wurde, neuen Dateipfad
exlSheet.Cells[index, 1] = 1;
exlSheet.Cells[index, 2] = "Stück";
exlSheet.Cells[index, 3] = entry;
lb_output.Items.Add(entry);
index++;
}
}
}
public ModelDoc2 OpenSwAssembly(string path)
{
ModelDoc2 swModel = default(ModelDoc2);
DocumentSpecification swDocSpecification = default(DocumentSpecification);
string[] componentsArray = new string[1];
object[] components = null;
string name = null;
int errors = 0;
int warnings = 0;
//Set the specifications
swDocSpecification = (DocumentSpecification)app.GetOpenDocSpec(path);
componentsArray[0] = "food bowl-1@bowl and chute";
components = (object[])componentsArray;
swDocSpecification.ComponentList = components;
swDocSpecification.Selective = true;
name = swDocSpecification.FileName;
swDocSpecification.DocumentType = (int)swDocumentTypes_e.swDocASSEMBLY;
swDocSpecification.DisplayState = "Default_Display State-1";
swDocSpecification.UseLightWeightDefault = false;
swDocSpecification.LightWeight = true;
swDocSpecification.Silent = true;
swDocSpecification.IgnoreHiddenComponents = true;
//Open the assembly document as per the specifications
swModel = (ModelDoc2)app.OpenDoc7(swDocSpecification);
errors = swDocSpecification.Error;
warnings = swDocSpecification.Warning;
Debugger.Break();
if (errors > 0)
{
throw new Exception("Error while opening Solidworks assembly");
}
if (warnings > 0)
{
System.Diagnostics.Debug.WriteLine("Warning while opening Soliworks assembly");
}
activeModel = swModel;
return(swModel);
}
public SWglTFModel ConvertToglTFModel(ModelDoc2 swModel, out ErrorType errors)
{
SWglTFModel model = null;
errors = ErrorType.DoNotKnow;
ProgressStatus_event(0.01, "开始读取", ErrorType.NoErros);
swDocumentTypes_e ModelType = (swDocumentTypes_e)swModel.GetType();
switch (ModelType)
{
case swDocumentTypes_e.swDocNONE:
errors = ErrorType.NoPartOrAssemblyDocument;
return(null);
case swDocumentTypes_e.swDocPART:
ProgressStatus_event(0.02, "读取零件信息", ErrorType.NoErros);
model = ConvertPartToglTF(swModel);
ProgressStatus_event(0.5, "读取零件信息完成", ErrorType.NoErros);
break;
case swDocumentTypes_e.swDocASSEMBLY:
ProgressStatus_event(0.02, "读取装配体信息", ErrorType.NoErros);
model = ConvertAssemblyToglTF(swModel);
ProgressStatus_event(0.5, "读取装配体信息完成", ErrorType.NoErros);
break;
case swDocumentTypes_e.swDocDRAWING:
errors = ErrorType.NoPartOrAssemblyDocument;
return(null);
case swDocumentTypes_e.swDocSDM:
errors = ErrorType.NoPartOrAssemblyDocument;
return(null);
case swDocumentTypes_e.swDocLAYOUT:
errors = ErrorType.NoPartOrAssemblyDocument;
return(null);
case swDocumentTypes_e.swDocIMPORTED_PART:
break;
case swDocumentTypes_e.swDocIMPORTED_ASSEMBLY:
break;
}
if (model == null)
{
errors = ErrorType.DoNotKnow;
}
return(model);
}
public void TestSerializeToString(string modelName)
{
ModelDoc2 doc = OpenSWDocument(modelName);
LinkNode baseNode = Serialization.LoadBaseNodeFromModel(SwApp, doc, out bool error);
Xunit.Assert.False(error);
PrivateType serialization = new PrivateType(typeof(Serialization));
string newData = (string)serialization.InvokeStatic(
"SerializeToString", new object[] { baseNode });
Xunit.Assert.NotNull(newData);
Xunit.Assert.NotEmpty(newData);
}
//Selects components from a list.
public static void selectComponents(ModelDoc2 model, List<Component2> components, bool clearSelection = true, int mark = -1)
{
if (clearSelection)
{
model.ClearSelection2(true);
}
SelectionMgr manager = model.SelectionManager;
SelectData data = manager.CreateSelectData();
data.Mark = mark;
foreach (Component2 component in components)
{
component.Select4(true, data, false);
}
}
public void TestLoadSWComponentsLinkNode(string modelName)
{
ModelDoc2 doc = OpenSWDocument(modelName);
AssemblyDoc assyDoc = (AssemblyDoc)doc;
LinkNode baseNode = Serialization.LoadBaseNodeFromModel(SwApp, doc, out bool abortProcess);
Assert.False(abortProcess);
List <string> problemLinks = new List <string>();
Common.LoadSWComponents(doc, baseNode, problemLinks);
Assert.Empty(problemLinks);
SwApp.CloseAllDocuments(true);
}
//Converts SW component references to PIDs
public static List <byte[]> SaveSWComponents(ModelDoc2 model, List <Component2> components)
{
List <byte[]> PIDs = new List <byte[]>();
foreach (Component2 component in components)
{
byte[] PID = SaveSWComponent(model, component);
if (PID != null)
{
PIDs.Add(PID);
}
}
return(PIDs);
}
public static bool IsSheetMetal(this ModelDoc2 model)
{
if (model is PartDoc == false)
{
return(false);
}
if (model.HasFlatPattern() == false)
{
return(false);
}
return(true);
}
// Строит или изменяет модель
public void Build()
{
InitAndRunSwApp();
// имена размеров в документе полумуфты
string fingerParameter1 = "fingers@Круговой массив1";
string fingerParameter2 = "fingers@Круговой массив2";
string nomianalDiameterParameter = "nominalDiameter@Эскиз1";
// имя полумуфты в сборке (имя компонента верхнего уровня)
string assemblyPolumuftaName = "Полумуфта-1";
// Менеджер выделения, выбора
SelectionMgr swSelMgr = (SelectionMgr)swModel.SelectionManager;
// удалить выделение
swModel.ClearSelection2(true);
Component2 swComp = assembly.GetComponentByName(assemblyPolumuftaName);
// выбрать полумуфту, не добавлять к выбранным, дата?, показать всплывающее кокшко
swComp.Select4(false, null, false);
int info = 0;
// начать изменение полумуфты
assembly.EditPart2(false, false, ref info);
// получить редактируемую модель
ModelDoc2 polumufta = (ModelDoc2)assembly.GetEditTarget();
// установка изменяемых параметров для всех конфигураций
polumufta.Parameter(fingerParameter1).SetSystemValue3(
countFingers,
(int)swSetValueInConfiguration_e.swSetValue_InAllConfigurations
);
polumufta.Parameter(fingerParameter2).SetSystemValue3(
countFingers,
(int)swSetValueInConfiguration_e.swSetValue_InAllConfigurations
);
polumufta.Parameter(nomianalDiameterParameter).SetSystemValue3(
nominalDiameter,
(int)swSetValueInConfiguration_e.swSetValue_InAllConfigurations
);
// ??
bool retVal = polumufta.EditSuppress2();
//Debug.Assert(retVal);
// ??
assembly.EditAssembly();
swModel.EditRebuild3();
swModel.ForceRebuild3(false);
swModel.ViewZoomtofit2();
}
public static byte[] ModelToBytes(ModelDoc2 model)
{
try
{
string fileName = model.GetTitle() + ".SLDPRT";
if (model.GetPathName() == null || model.GetPathName().Length == 0)
{
MessageBox.Show("Please, save model before adding!", "Search 3d Models", MessageBoxButtons.OK);
MessageBox.Show("Model in DB will be with with name, that was in 'Model Name' input box!", "Attention!", MessageBoxButtons.OK);
bool boolstatus = model.Save3((int)swSaveAsOptions_e.swSaveAsOptions_SaveReferenced, 0, 0);
}
string sourcePath = model.GetPathName();
string targetPath;
if (GetModelsFolder() == null || GetModelsFolder().Length == 0)
{
string myDocuments = System.Environment.GetFolderPath(System.Environment.SpecialFolder.MyDocuments);
targetPath = myDocuments + @"\Search3DModels\Temp\";
}
else
{
targetPath = GetModelsFolder() + @"\Temp\";
}
string destinationFile = System.IO.Path.Combine(targetPath, fileName);
if (!System.IO.Directory.Exists(targetPath))
{
System.IO.Directory.CreateDirectory(targetPath);
}
System.IO.File.Copy(sourcePath, destinationFile, true);
FileStream fs = new FileStream(destinationFile, FileMode.Open, FileAccess.Read);
byte[] modelInBytes = new byte[fs.Length];
fs.Read(modelInBytes, 0, System.Convert.ToInt32(fs.Length));
fs.Close();
Directory.Delete(targetPath, true);
return(modelInBytes);
}
catch (Exception exp)
{
MessageBox.Show(exp.StackTrace, "modelToBytes()", MessageBoxButtons.OK);
}
return(null);
}
private static void LerBOM(BomTableAnnotation swBomTable, ModelDoc2 swModel)
{
TableAnnotation tabela = (TableAnnotation)swBomTable;
long coluna = tabela.ColumnCount;
long linha = tabela.RowCount;
listaDeCodigos.Add(Path.GetFileNameWithoutExtension(swModel.GetPathName()) + ";");
for (int i = 0; i < linha - 1; i++)
{
listaDeCodigos.Add((tabela.Text[i, 1] + ";" + tabela.Text[i, 5]));
}
listaDeCodigos.Add(";");
}
public SwDrawing(ModelDoc2 drawModel) //Инициализация из класса модели
{
_drawModel = drawModel;
if (_drawModel.GetType() == (int)DocType)
{
_swApp = SwProcess.swApp;
_swDraw = (DrawingDoc)_drawModel;
Debug.Print("SwDrawing initialised");
}
else
{
throw new System.TypeLoadException("Модель не является чертежом");
}
}
public static void AddAll(SldWorks swApp, ModelDoc2 parentDoc, List <KeyValuePair <string, string> > properties)
{
swApp.ActivateDoc(parentDoc.GetTitle());
var configuration = ((Configuration)parentDoc.GetActiveConfiguration()).Name;
MessageBox.Show("configuration - " + configuration);
var swCustProp = parentDoc.Extension.CustomPropertyManager[configuration];
foreach (var property in properties)
{
MessageBox.Show(property.Key + " - " + property.Value, "Свойство для добавления");
AddProperty(swCustProp, property);
}
}
public void makeDimensions(ModelDoc2 swModel)
{
foreach (string[] list in pack)
{
swModel.ClearSelection2(true);
for (int i = 6; i < list.Length; i++)
{
SmartTools.SelectByID(swModel, list[i]);
}
swModel.AddDimension2(Convert.ToDouble(list[3]), Convert.ToDouble(list[4]), Convert.ToDouble(list[5]));
}
}
public void makeBindings(ModelDoc2 swModel)
{
foreach (string[] list in pack)
{
swModel.ClearSelection2(true);
for (int i = 1; i < list.Length; i++)
{
SmartTools.SelectByID(swModel, list[i]);
}
swModel.SketchAddConstraints(list[0]);
}
}
static public List <ColumnNameEditPropTable> ListColumnToEditProp(ModelDoc2 swModel)
{
var columnRow = new List <ColumnNameEditPropTable>();
object[] configNamesDll = swModel.GetConfigurationNames();
foreach (string configName in configNamesDll)
{
Configuration swConf = swModel.GetConfigurationByName(configName);
if (swConf.IsDerived() == false)
{
var customPropMan = swModel.Extension.CustomPropertyManager[configName];
var valOut = "";
var number = "";
var description = "";
var matName = "";
var thickness = "";
var codFb = "";
customPropMan.Get4("Обозначение", true, out valOut, out number);
customPropMan.Get4("Наименование", true, out valOut, out description);
customPropMan.Get4("Код_ФБ", true, out valOut, out codFb);
customPropMan.Get4("Материал_Таблица", true, out valOut, out matName);
customPropMan.Get4("Толщина листового металла", true, out valOut, out thickness);
var columnNameClass = new ColumnNameEditPropTable();
if (configName == "00")
{
columnNameClass.ColumnNumber = number;
}
else
{
columnNameClass.ColumnNumber = "-" + configName;
}
columnNameClass.ColumnConfig = configName;
columnNameClass.ColumnDescription = description;
columnNameClass.ColumnThickness = thickness;
columnNameClass.CodFb = codFb;
columnNameClass.ColumnMatName = matName.Replace("$PRPSHEET:\"Толщина листового металла\"", thickness);
columnRow.Add(columnNameClass);
}
}
return(columnRow);
}
public void TestLoadSWComponent(string modelName, byte[] pid)
{
ModelDoc2 doc = OpenSWDocument(modelName);
AssemblyDoc assyDoc = (AssemblyDoc)doc;
LinkNode baseNode = Serialization.LoadBaseNodeFromModel(SwApp, doc, out bool abortProcess);
Assert.False(abortProcess);
baseNode.Link.SWMainComponentPID = baseNode.Link.SWComponentPIDs[0];
Component2 component = Common.LoadSWComponent(doc, baseNode.Link.SWMainComponentPID);
Assert.NotNull(component);
SwApp.CloseAllDocuments(true);
}
public void TestGetCountLink(string modelName, int expected)
{
ModelDoc2 doc = OpenSWDocument(modelName);
AssemblyDoc assyDoc = (AssemblyDoc)doc;
LinkNode baseNode = Serialization.LoadBaseNodeFromModel(SwApp, doc, out bool abortProcess);
Assert.False(abortProcess);
Link baseLink = baseNode.GetLink();
Assert.Equal(expected, Common.GetCount(baseLink));
SwApp.CloseAllDocuments(true);
}
public static void Actualization(ModelDoc2 model, SwAddin _mSwAddin)
{
Component2 _swSelectedComponent = model.ConfigurationManager.ActiveConfiguration.GetRootComponent3(true);
OleDbCommand cm;
OleDbDataReader rd;
OleDbConnection oleDb;
if (!_mSwAddin.OpenModelDatabase(model, out oleDb))
return;
cm = new OleDbCommand("SELECT * FROM faners ORDER BY FanerName ", oleDb);
rd = cm.ExecuteReader();
List<Faner> faners = new List<Faner>();
while (rd.Read())
{
if (rd["FanerType"] as string != null)
{
faners.Add(new Faner((string)rd["FanerName"], (string)rd["FanerType"], (string)rd["DecorGroup"]));
}
else
{
faners.Add(new Faner((string)rd["FanerName"], string.Empty, (string)rd["DecorGroup"]));
}
}
rd.Close();
Feature feature;
foreach (var faner in faners)
{
string suffix = faner.FanerName.Substring(faner.FanerName.Length - 2, 2);
feature = FindEdge(_swSelectedComponent, faner.AxFanerName);
if (feature != null)
{
if (feature.IsSuppressed())
{
_mSwAddin.SetModelProperty(model, "Faner" + suffix, "", swCustomInfoType_e.swCustomInfoText, string.Empty, true);
_mSwAddin.SetModelProperty(model, "colorFaner" + suffix, "", swCustomInfoType_e.swCustomInfoText, string.Empty, true);
}
else
{
string fieldValue = model.GetCustomInfoValue(string.Empty, "Faner" + suffix);
if (fieldValue == string.Empty)
{
string msgText = "Для данной детали: " + model.GetPathName() + " кромка Faner" + suffix + " в модели не соответствует свойствам файла сборки. Данная кромка не будет импортирована в программу Покупки! Чтобы исправить эту ошибку используйте опцию \"MrDoors - Отделка кромки\"";
MessageBox.Show(msgText, @"MrDoors", MessageBoxButtons.OK);
}
}
}
}
}
public FrmEdge(SwAddin swAddin)
{
InitializeComponent();
_mSwAddin = swAddin;
_swModel = (ModelDoc2)_mSwAddin.SwApp.ActiveDoc;
_swSelMgr = (SelectionMgr)_swModel.SelectionManager;
_swAsmDoc = (AssemblyDoc)_swModel;
_swAsmDoc.NewSelectionNotify += NewSelection;
pbEdge11.Image = null;
pbEdge12.Image = null;
pbEdge21.Image = null;
pbEdge22.Image = null;
NewSelection();
Show();
}
public AssemblyContext(string assemblyPath)
{
//var sw = Activator.GetObject(Type.GetTypeFromProgID("SldWorks.Application")) as SldWorks;
//var sw = (SldWorks)System.Runtime.InteropServices.Marshal.GetActiveObject("SldWorks.Application");
sw = new SldWorks();
sw.Visible = true;
workingFolder = Path.GetDirectoryName(assemblyPath);
sw.SetCurrentWorkingDirectory(workingFolder);
var filePath = assemblyPath;
doc = sw.OpenDoc6(filePath,
(int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "",
ref error, ref warning);
drag = (DragOperator)((AssemblyDoc)doc).GetDragOperator();
math = (MathUtility)sw.GetMathUtility();
}
/// <summary>
/// Constructs a new IJointAxis
/// </summary>
/// <param name="path">Path to this joint's storage</param>
/// <param name="current">The joint that this axis is contained in</param>
public IJointAxis(string path, Joint current)
{
this.swApp = RobotInfo.SwApp;
this.modelDoc = RobotInfo.ModelDoc;
this.swData = RobotInfo.SwData;
this.path = path;
this.owner = current;
this.robot = RobotInfo.Robot;
if (EffortLimit == 0)
{
this.EffortLimit = 1;
}
if (Axis != null)
{
CalcAxisVector();
}
mathUtil = (MathUtility)swApp.GetMathUtility();
}
public FrmSetParameters(SwAddin swAddin)
{
InitializeComponent();
bitmap = Properties.Resources.Brush;
tabMain.AutoSize = true;
KeyDown += FormKeyDown;
_mSwAddin = swAddin;
_swModel = (ModelDoc2)_mSwAddin.SwApp.ActiveDoc;
_swSelMgr = (SelectionMgr)_swModel.SelectionManager;
_swAsmDoc = (AssemblyDoc)_swModel;
_swAsmDoc.NewSelectionNotify += NewSelection;
_swAsmDoc.AddItemNotify += AddNewItem;
tabMain.Selected += TabMainTabSelected;
tabMain.SelectedIndexChanged += TabMainSelectedIndexChanged;
if (!Properties.Settings.Default.SetParentWindow)
TopMost = true;
Show();
NewSelection();
}
/// <summary>
/// Creates a StorageModel for reading and writing data on the given Model
/// </summary>
/// <param name="model">Model to read and write data keys from</param>
public StorageModel(ModelDoc2 model)
{
this.model = model;
data = new Dictionary<string, LinkedList<IAttribute>>();
//storedDoubles = new Dictionary<string,List<double>>();
storedObjects = new Dictionary<string,object>();
//storedStrings = new Dictionary<string,List<string>>();
Feature feat = model.FirstFeature(); //Start scan of robot attribute's sub-features
IAttribute attr;
nextID = 0;
int id;
string path;
int stopindex;
LinkedList<IAttribute> newlist;
while (feat != null) //Scan robot attribute's sub-features
{
if (feat.GetTypeName().Equals("Attribute"))
{
attr = (IAttribute)feat.GetSpecificFeature2();
if (attr.GetName().StartsWith("gsim"))
{
stopindex = attr.GetName().IndexOf("_");
id = Convert.ToInt32(attr.GetName().Substring(4, stopindex-4));
if (id >= nextID)
nextID = id + 1;
path = ((IParameter)attr.GetParameter("name")).GetStringValue();
if (!data.ContainsKey(path))
{
newlist = new LinkedList<IAttribute>();
newlist.AddLast(attr);
data.Add(path, newlist);
}
else
data[path].AddLast(attr);
}
}
feat = feat.GetNextFeature();
}
}
//Selects the components of a link. Helps highlight when the associated node is selected from the tree
public static void selectComponents(ModelDoc2 model, link Link, bool clearSelection, int mark = -1)
{
if (clearSelection)
{
model.ClearSelection2(true);
}
SelectionMgr manager = model.SelectionManager;
SelectData data = manager.CreateSelectData();
data.Mark = mark;
if (Link.SWComponent != null)
{
Link.SWComponent.Select4(true, data, false);
}
else
{
selectComponents(model, Link.SWcomponents, false);
}
foreach (link child in Link.Children)
{
selectComponents(model, child, false, mark);
}
}
public AssemblyExportForm(ISldWorks iSwApp, LinkNode node)
{
InitializeComponent();
swApp = iSwApp;
BaseNode = node;
ActiveSWModel = swApp.ActiveDoc;
Exporter = new URDFExporter(iSwApp);
AutoUpdatingForm = false;
jointBoxes = new Control[] {
textBox_joint_name, comboBox_axis, comboBox_joint_type,
textBox_axis_x, textBox_axis_y, textBox_axis_z,
textBox_joint_x, textBox_joint_y, textBox_joint_z, textBox_joint_pitch, textBox_joint_roll, textBox_joint_yaw,
textBox_limit_lower, textBox_limit_upper, textBox_limit_effort, textBox_limit_velocity,
textBox_damping, textBox_friction,
textBox_calibration_falling, textBox_calibration_rising,
textBox_soft_lower, textBox_soft_upper, textBox_k_position, textBox_k_velocity
};
linkBoxes = new Control[] {
textBox_inertial_origin_x, textBox_inertial_origin_y, textBox_inertial_origin_z, textBox_inertial_origin_roll, textBox_inertial_origin_pitch, textBox_inertial_origin_yaw,
textBox_visual_origin_x, textBox_visual_origin_y, textBox_visual_origin_z, textBox_visual_origin_roll, textBox_visual_origin_pitch, textBox_visual_origin_yaw,
textBox_collision_origin_x, textBox_collision_origin_y, textBox_collision_origin_z, textBox_collision_origin_roll, textBox_collision_origin_pitch, textBox_collision_origin_yaw,
textBox_ixx, textBox_ixy, textBox_ixz, textBox_iyy, textBox_iyz, textBox_izz,
textBox_mass,
domainUpDown_red, domainUpDown_green, domainUpDown_blue, domainUpDown_alpha,
comboBox_materials,
textBox_texture
};
saveConfigurationAttributeDef = iSwApp.DefineAttribute("URDF Export Configuration");
int Options = 0;
saveConfigurationAttributeDef.AddParameter("data", (int)swParamType_e.swParamTypeString, 0, Options);
saveConfigurationAttributeDef.AddParameter("name", (int)swParamType_e.swParamTypeString, 0, Options);
saveConfigurationAttributeDef.AddParameter("date", (int)swParamType_e.swParamTypeString, 0, Options);
saveConfigurationAttributeDef.AddParameter("exporterVersion", (int)swParamType_e.swParamTypeDouble, 1.0, Options);
saveConfigurationAttributeDef.Register();
}
/// <summary>
/// Creates a new joint
/// </summary>
/// <param name="path">Path to this joint in the StorageModel</param>
/// <param name="owner">The Link that owns this joint (child Link in the joint)</param>
public Joint(string path, Link parent, Link child)
{
this.swApp = RobotInfo.SwApp;
this.asmDoc = RobotInfo.AssemDoc;
this.modelDoc = RobotInfo.ModelDoc;
this.swData = RobotInfo.SwData;
this.path = path;
this.robot = RobotInfo.Robot;
this.Parent = parent;
Parent.ChildJoints.Add(this);
this.Child = child;
this.Selected = false;
this.Type = JointFactory.DefaultJointType;
RobotInfo.WriteToLogFile("Getting Joint Specifics (Joint)");
jointSpecifics = JointFactory.GetSpecificJoint(Type,path,this);
RobotInfo.WriteToLogFile("Successfully created Joint Specifics (Joint)");
if (swData.GetDouble(path) == 0)
{
swData.SetDouble(path, 1);
}
}
// This creates a Link from a Part ModelDoc. It basically just extracts the material properties and saves them to the appropriate fields.
public link createLinkFromPartModel(ModelDoc2 swModel)
{
link Link = new link();
Link.name = swModel.GetTitle();
Link.isFixedFrame = false;
Link.Visual = new visual();
Link.Inertial = new inertial();
Link.Collision = new collision();
//Get link properties from SolidWorks part
IMassProperty swMass = swModel.Extension.CreateMassProperty();
Link.Inertial.Mass.value = swMass.Mass;
double[] moment = swMass.GetMomentOfInertia((int)swMassPropertyMoment_e.swMassPropertyMomentAboutCenterOfMass); // returned as double with values [Lxx, Lxy, Lxz, Lyx, Lyy, Lyz, Lzx, Lzy, Lzz]
Link.Inertial.Inertia.setMomentMatrix(moment);
double[] centerOfMass = swMass.CenterOfMass;
Link.Inertial.Origin.xyz = centerOfMass;
Link.Inertial.Origin.rpy = new double[3] { 0, 0, 0 };
// Will this ever not be zeros?
Link.Visual.Origin.xyz = new double[3] { 0, 0, 0 };
Link.Visual.Origin.rpy = new double[3] { 0, 0, 0 };
Link.Collision.Origin.xyz = new double[3] { 0, 0, 0 };
Link.Collision.Origin.rpy = new double[3] { 0, 0, 0 };
// [ R, G, B, Ambient, Diffuse, Specular, Shininess, Transparency, Emission ]
double[] values = swModel.MaterialPropertyValues;
Link.Visual.Material.Color.Red = values[0];
Link.Visual.Material.Color.Green = values[1];
Link.Visual.Material.Color.Blue = values[2];
Link.Visual.Material.Color.Alpha = 1.0 - values[7];
Link.Visual.Material.name = "material_" + Link.name;
return Link;
}
public PartEventHandler(ModelDoc2 modDoc, SwAddin addin)
: base(modDoc, addin)
{
doc = (PartDoc)document;
}
public DrawingEventHandler(ModelDoc2 modDoc, SwAddin addin)
: base(modDoc, addin)
{
doc = (DrawingDoc)document;
}
/// <summary>
/// Creates a new robot editor proptery manager page that allows the user to select robot frame-of-reference objects.
/// </summary>
/// <param name="robot">Active robot model</param>
/// <param name="document">Active assembly document</param>
/// <param name="swApp">Solidworks application environment</param>
public RobotPMPage(RobotModel robot, AssemblyDoc document, SldWorks swApp)
{
//Validate parameters
if (robot == null)
throw new ProgramErrorException("Tried to create a JointPMPage with a null robot model.");
if (document == null)
throw new ProgramErrorException("Tried to create a JointPMPage with a null assembly document.");
if (swApp == null)
throw new ProgramErrorException("Tried to create a JointPMPage with a null solidworks application interface.");
//Initialize fields
this.robot = robot;
this.swApp = swApp;
mathUtil = ((IMathUtility)swApp.GetMathUtility());
//AssemblyDoc inherits ModelDoc2 but the relationship dosn't carry through the COM interface
//Having two fields prevents having to cast half of the time
modelDoc = (ModelDoc2)document;
assemblyDoc = document;
//Setup the page, its controls and their visual layout
SetupPage();
}
private void InitTableData()
{
md = (ModelDoc2)DrawingPropertySet.SwApp.ActiveDoc;
mde = md.Extension;
fracdisp = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
//int den = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearFractionDenominator,
// (int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
decs = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalPlaces,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
decd = mde.GetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified);
try {
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, (int)swFractionDisplay_e.swDECIMAL);
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalPlaces,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, 3);
mde.SetUserPreferenceInteger((int)swUserPreferenceIntegerValue_e.swUnitsLinearDecimalDisplay,
(int)swUserPreferenceOption_e.swDetailingNoOptionSpecified, 3);
md.ForceRebuild3(false);
table = new swTableType.swTableType((DrawingPropertySet.SwApp.ActiveDoc as ModelDoc2),
Redbrick.MasterHashes);
} catch (NullReferenceException nre) {
if (_swApp != null) {
Redbrick.InsertBOM(_swApp);
InitTableData();
} else {
throw new NullReferenceException(@"No table found.");
}
} catch (Exception e) {
RedbrickErr.ErrMsg em = new RedbrickErr.ErrMsg(e);
em.ShowDialog();
Close();
} finally {
//
}
}
public static void Create(ISldWorks app, ModelDoc2 mainModel)
{
string drawingTemplate = app.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplateDrawing);
ModelDoc2 designProject = app.NewDocument(drawingTemplate, (int)swDwgPaperSizes_e.swDwgPaperBsize, 0, 0);
DrawingDoc designProjectDrawing = (DrawingDoc)designProject;
int errors = 0;
app.ActivateDoc2(designProject.GetTitle(), false, ref errors);
designProjectDrawing.SetupSheet5("", (int)swDwgPaperSizes_e.swDwgPapersUserDefined, (int)swDwgTemplates_e.swDwgTemplateCustom, 1, 100, false, "a4 - iso.slddrt", 0.297, 0.21, "", true);
var h = designProjectDrawing.CreateDrawViewFromModelView3(mainModel.GetPathName(), "*Изометрия", 0.1, 0.2, 0);
List<OrderComponentData> orderData = new List<OrderComponentData>();
object[] allComponents = ((AssemblyDoc)mainModel).GetComponents(true);
foreach (Component2 component in allComponents)
{
ModelDoc2 currentModel = component.GetModelDoc2();
string ip = GetCustomPropertyValue(currentModel, "IsProduct");
if (ip == "Yes")
{
orderData.Add(
new OrderComponentData()
{
Article = GetCustomPropertyValue(currentModel, "Articul"),
Name = GetCustomPropertyValue(currentModel, "Part_Name_spec"),
Width = GetCustomPropertyValue(currentModel, "Size1_spec"),
Depth = GetCustomPropertyValue(currentModel, "Size2_spec"),
Height = GetCustomPropertyValue(currentModel, "Size3_spec"),
Color1 = GetCustomPropertyValue(currentModel, "Color1"),
Color2 = GetCustomPropertyValue(currentModel, "Color2"),
Color3 = GetCustomPropertyValue(currentModel, "Color3"),
Color4 = GetCustomPropertyValue(currentModel, "Color4"),
Color5 = GetCustomPropertyValue(currentModel, "Color5"),
Color6 = GetCustomPropertyValue(currentModel, "Color6"),
Color7 = GetCustomPropertyValue(currentModel, "Color7")
});
}
}
TableAnnotation table = designProjectDrawing.InsertTableAnnotation(0.01, 0.15, (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_TopLeft, orderData.Count + 1, 14);
table.BorderLineWeight = 0;
table.GridLineWeight = 0;
#region Заполнение заголовков колонок таблицы
table.set_Text(0, 0, "Поз.");
table.set_Text(0, 1, "Артикул");
table.set_Text(0, 2, "Наименование изделия");
table.set_Text(0, 3, "Ширина");
table.set_Text(0, 4, "Глубина");
table.set_Text(0, 5, "Высота");
table.set_Text(0, 6, "Цвет 1");
table.set_Text(0, 7, "Цвет 2");
table.set_Text(0, 8, "Цвет 3");
table.set_Text(0, 9, "Цвет 4");
table.set_Text(0, 10, "Цвет 5");
table.set_Text(0, 11, "Цвет 6");
table.set_Text(0, 12, "Цвет 7");
table.set_Text(0, 13, "Кол-во");
#endregion
int i = 1;
foreach (OrderComponentData productData in orderData)
{
table.set_Text(i, 0, i.ToString());
table.set_Text(i, 1, productData.Article);
table.set_Text(i, 2, productData.Name);
table.set_Text(i, 3, productData.Width);
table.set_Text(i, 4, productData.Depth);
table.set_Text(i, 5, productData.Height);
table.set_Text(i, 6, productData.Color1);
table.set_Text(i, 7, productData.Color2);
table.set_Text(i, 8, productData.Color3);
table.set_Text(i, 9, productData.Color4);
table.set_Text(i, 10, productData.Color5);
table.set_Text(i, 11, productData.Color6);
table.set_Text(i, 12, productData.Color7);
i++;
}
table.SetColumnWidth(0, 0.013, (int)swTableRowColSizeChangeBehavior_e.swTableRowColChange_TableSizeCanChange);
table.SetColumnWidth(1, 0.025, (int)swTableRowColSizeChangeBehavior_e.swTableRowColChange_TableSizeCanChange);
table.SetColumnWidth(2, 0.07, (int)swTableRowColSizeChangeBehavior_e.swTableRowColChange_TableSizeCanChange);
for (int j = 3; j < 14; j++)
{
table.SetColumnWidth(j, 0.02, (int)swTableRowColSizeChangeBehavior_e.swTableRowColChange_TableSizeCanChange);
}
designProject.ViewZoomtofit2();
}
public static string GetCustomPropertyValue(ModelDoc2 model, string propertyName)
{
CustomPropertyManager propertyManager = model.Extension.get_CustomPropertyManager(string.Empty);
string value = string.Empty;
string resolvedValue = string.Empty;
propertyManager.Get4(propertyName, false, out value, out resolvedValue);
return resolvedValue;
}