public override Result Open()
{
modbus.Open();
return(new Result {
IsSuccess = modbus.IsOpen()
});
}
public void Connection()
{
busRtuClient?.Close();
busRtuClient = new ModbusRtu(Station);
busRtuClient.AddressStartWithZero = true;
busRtuClient.IsStringReverse = false;
try
{
busRtuClient.SerialPortInni(sp =>
{
sp.PortName = serialPort.PortName;
sp.BaudRate = serialPort.BaudRate;
sp.DataBits = serialPort.DataBits;
sp.StopBits = serialPort.StopBits;
sp.Parity = serialPort.Parity;
});
busRtuClient.Open();
IsConnected = true;
}
catch (TimeoutException ex)
{
EventscadaException?.Invoke(this.GetType().Name, ex.Message);
}
}
private void button1_Click(object sender, EventArgs e)
{
if (!int.TryParse(textBox2.Text, out int baudRate))
{
MessageBox.Show(DemoUtils.BaudRateInputWrong);
return;
}
if (!int.TryParse(textBox16.Text, out int dataBits))
{
MessageBox.Show(DemoUtils.DataBitsInputWrong);
return;
}
if (!int.TryParse(textBox17.Text, out int stopBits))
{
MessageBox.Show(DemoUtils.StopBitInputWrong);
return;
}
if (!byte.TryParse(textBox15.Text, out byte station))
{
MessageBox.Show("Station input wrong！");
return;
}
busRtuClient?.Close( );
busRtuClient = new ModbusRtu(station);
busRtuClient.AddressStartWithZero = checkBox1.Checked;
ComboBox2_SelectedIndexChanged(null, new EventArgs( ));
busRtuClient.IsStringReverse = checkBox3.Checked;
try
{
busRtuClient.SerialPortInni(sp =>
{
sp.PortName = comboBox3.Text;
sp.BaudRate = baudRate;
sp.DataBits = dataBits;
sp.StopBits = stopBits == 0 ? System.IO.Ports.StopBits.None : (stopBits == 1 ? System.IO.Ports.StopBits.One : System.IO.Ports.StopBits.Two);
sp.Parity = comboBox1.SelectedIndex == 0 ? System.IO.Ports.Parity.None : (comboBox1.SelectedIndex == 1 ? System.IO.Ports.Parity.Odd : System.IO.Ports.Parity.Even);
});
busRtuClient.RtsEnable = checkBox5.Checked;
busRtuClient.Open( );
button2.Enabled = true;
button1.Enabled = false;
panel2.Enabled = true;
userControlReadWriteOp1.SetReadWriteNet(busRtuClient, "100", false);
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public CameraController(VM_MSConfig msConfig)
{
Config = msConfig;
busRtuClient?.Close();
busRtuClient = new ModbusRtu(Config.Station);
busRtuClient.AddressStartWithZero = Config.DDFlag;
busRtuClient.IsStringReverse = Config.ComFlag;
try
{
busRtuClient.SerialPortInni(sp =>
{
sp.PortName = Config.Com;
sp.BaudRate = Config.BaudRate;
sp.DataBits = Config.DataBits;
sp.StopBits = Config.StopBits == 0 ? System.IO.Ports.StopBits.None : (Config.StopBits == 1 ? System.IO.Ports.StopBits.One : System.IO.Ports.StopBits.Two);
sp.Parity = Config.Parity == 0 ? System.IO.Ports.Parity.None : (Config.Parity == 1 ? System.IO.Ports.Parity.Odd : System.IO.Ports.Parity.Even);
});
busRtuClient.Open();
LogHelper.WriteInfoLog("busRtuClient Open Succeed！");
}
catch (Exception ex)
{
LogHelper.WriteInfoLog(ex.Message);
}
}
public void connect()
{
if (!int.TryParse(config.botelv, out int baudRate))
{
MessageBox.Show(DemoUtils.BaudRateInputWrong);
return;
}
if (!int.TryParse(config.shujuwei, out int dataBits))
{
MessageBox.Show(DemoUtils.DataBitsInputWrong);
return;
}
if (!int.TryParse(config.tingzhiwei, out int stopBits))
{
MessageBox.Show(DemoUtils.StopBitInputWrong);
return;
}
if (!byte.TryParse(config.zhanhao, out byte station))
{
MessageBox.Show("Station input wrong！");
return;
}
busRtuClient?.Close();
busRtuClient = new ModbusRtu(station);
busRtuClient.AddressStartWithZero = config.dataFromZero;
busRtuClient.IsStringReverse = config.stringReverse;
try
{
busRtuClient.SerialPortInni(sp =>
{
sp.PortName = config.COM_Name;
sp.BaudRate = baudRate;
sp.DataBits = dataBits;
sp.StopBits = stopBits == 0 ? System.IO.Ports.StopBits.None : (stopBits == 1 ? System.IO.Ports.StopBits.One : System.IO.Ports.StopBits.Two);
sp.Parity = config.checkInfo == 0 ? System.IO.Ports.Parity.None : (config.checkInfo == 1 ? System.IO.Ports.Parity.Odd : System.IO.Ports.Parity.Even);
});
busRtuClient.Open();
// button2.Enabled = true;
// button1.Enabled = false;
//panel2.Enabled = true;
//userControlCurve1.ReadWriteNet = busRtuClient;
}
catch (Exception ex)
{
MessageBox.Show("串口打开失败!!");
MessageBox.Show(ex.Message);
}
}
private void btnCom_Click(object sender, EventArgs e)
{
if (IsOpen)
{
try
{
busRtuClient.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message, "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
btnCom.Text = "打开串口";
picComStatus.BackgroundImage = Properties.Resources.redlight;
IsOpen = false;
}
else
{
busRtuClient?.Close();
busRtuClient = new ModbusRtu();
busRtuClient.AddressStartWithZero = checkBox1.Checked;
ComboBox2_SelectedIndexChanged(null, new EventArgs());
busRtuClient.IsStringReverse = checkBox3.Checked;
try
{
busRtuClient.SerialPortInni(sp =>
{
sp.PortName = drpComList.SelectedItem.ToString();;
sp.BaudRate = Convert.ToInt32(drpBaudRate.SelectedItem.ToString());
sp.DataBits = Convert.ToInt32(drpDataBits.SelectedItem.ToString());
sp.StopBits = (StopBits)Convert.ToInt32(drpStopBits.SelectedItem.ToString());
sp.Parity = (Parity)Convert.ToInt32(drpParity.SelectedIndex.ToString());
});
busRtuClient.Open();
btnCom.Text = "关闭串口";
picComStatus.BackgroundImage = Properties.Resources.greenlight;
}
catch (Exception ex)
{
btnCom.Text = "打开串口";
picComStatus.BackgroundImage = Properties.Resources.redlight;
MessageBox.Show(ex.Message);
}
IsOpen = true;
}
// busRtuClient?.Close();
}
private void button1_Click(object sender, EventArgs e)
{
if (!int.TryParse(textBox2.Text, out int baudRate))
{
MessageBox.Show("波特率输入错误！");
return;
}
if (!int.TryParse(textBox16.Text, out int dataBits))
{
MessageBox.Show("数据位输入错误！");
return;
}
if (!int.TryParse(textBox17.Text, out int stopBits))
{
MessageBox.Show("停止位输入错误！");
return;
}
if (!byte.TryParse(textBox15.Text, out byte station))
{
MessageBox.Show("站号输入不正确！");
return;
}
busRtuClient?.Close( );
busRtuClient = new ModbusRtu(station);
busRtuClient.AddressStartWithZero = checkBox1.Checked;
busRtuClient.IsMultiWordReverse = checkBox2.Checked;
busRtuClient.IsStringReverse = checkBox3.Checked;
try
{
busRtuClient.SerialPortInni(sp =>
{
sp.PortName = textBox1.Text;
sp.BaudRate = baudRate;
sp.DataBits = dataBits;
sp.StopBits = stopBits == 0 ? System.IO.Ports.StopBits.None : (stopBits == 1 ? System.IO.Ports.StopBits.One : System.IO.Ports.StopBits.Two);
sp.Parity = comboBox1.SelectedIndex == 0 ? System.IO.Ports.Parity.None : (comboBox1.SelectedIndex == 1 ? System.IO.Ports.Parity.Odd : System.IO.Ports.Parity.Even);
});
busRtuClient.Open( );
button2.Enabled = true;
button1.Enabled = false;
panel2.Enabled = true;
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
protected override bool Connect()
{
try
{
_modbusDevice.SerialPortInni(sp =>
{
sp.PortName = Port;
sp.StopBits = StopBits.One;
sp.DataBits = DataBit;
sp.BaudRate = BaudRate;
sp.Parity = parity;
});
try
{
_modbusDevice.Close();
}
catch { }
_modbusDevice.Open();
if (_modbusDevice.IsOpen())
{
LOG.Info($"Connect to ModbusRtu device [{SourceName}] success.");
return(true);
}
else
{
LOG.Info($"Connect to ModbusRtu device [{SourceName}] failed.");
return(false);
}
}
catch (Exception ex)
{
LOG.Error($"Connect to ModbusRtu device [{SourceName}] Exception:{ex.Message}");
return(false);
}
}
public void ModbusRtuUnitTest( )
{
ModbusRtu modbus = new ModbusRtu(1);
modbus.SerialPortInni("COM2", 9600);
try
{
modbus.Open( );
}
catch
{
Console.WriteLine("无法连接modbus，将跳过单元测试。等待网络正常时，再进行测试");
return;
}
// 开始单元测试，从coil类型开始测试
string address = "1200";
bool[] boolTmp = new bool[] { true, true, false, true, false, true, false };
Assert.IsTrue(modbus.WriteCoil(address, true).IsSuccess);
Assert.IsTrue(modbus.ReadCoil(address).Content == true);
Assert.IsTrue(modbus.WriteCoil(address, boolTmp).IsSuccess);
bool[] readBool = modbus.ReadCoil(address, (ushort)boolTmp.Length).Content;
for (int i = 0; i < boolTmp.Length; i++)
{
Assert.IsTrue(readBool[i] == boolTmp[i]);
}
address = "300";
// short类型
Assert.IsTrue(modbus.Write(address, (short)12345).IsSuccess);
Assert.IsTrue(modbus.ReadInt16(address).Content == 12345);
short[] shortTmp = new short[] { 123, 423, -124, 5313, 2361 };
Assert.IsTrue(modbus.Write(address, shortTmp).IsSuccess);
short[] readShort = modbus.ReadInt16(address, (ushort)shortTmp.Length).Content;
for (int i = 0; i < readShort.Length; i++)
{
Assert.IsTrue(readShort[i] == shortTmp[i]);
}
// ushort类型
Assert.IsTrue(modbus.Write(address, (ushort)51234).IsSuccess);
Assert.IsTrue(modbus.ReadUInt16(address).Content == 51234);
ushort[] ushortTmp = new ushort[] { 5, 231, 12354, 5313, 12352 };
Assert.IsTrue(modbus.Write(address, ushortTmp).IsSuccess);
ushort[] readUShort = modbus.ReadUInt16(address, (ushort)ushortTmp.Length).Content;
for (int i = 0; i < ushortTmp.Length; i++)
{
Assert.IsTrue(readUShort[i] == ushortTmp[i]);
}
// int类型
Assert.IsTrue(modbus.Write(address, 12342323).IsSuccess);
Assert.IsTrue(modbus.ReadInt32(address).Content == 12342323);
int[] intTmp = new int[] { 123812512, 123534, 976124, -1286742 };
Assert.IsTrue(modbus.Write(address, intTmp).IsSuccess);
int[] readint = modbus.ReadInt32(address, (ushort)intTmp.Length).Content;
for (int i = 0; i < intTmp.Length; i++)
{
Assert.IsTrue(readint[i] == intTmp[i]);
}
// uint类型
Assert.IsTrue(modbus.Write(address, (uint)416123237).IsSuccess);
Assert.IsTrue(modbus.ReadUInt32(address).Content == (uint)416123237);
uint[] uintTmp = new uint[] { 81623123, 91712749, 91273123, 123, 21242, 5324 };
Assert.IsTrue(modbus.Write(address, uintTmp).IsSuccess);
uint[] readuint = modbus.ReadUInt32(address, (ushort)uintTmp.Length).Content;
for (int i = 0; i < uintTmp.Length; i++)
{
Assert.IsTrue(readuint[i] == uintTmp[i]);
}
// float类型
Assert.IsTrue(modbus.Write(address, 123.45f).IsSuccess);
Assert.IsTrue(modbus.ReadFloat(address).Content == 123.45f);
float[] floatTmp = new float[] { 123, 5343, 1.45f, 563.3f, 586.2f };
Assert.IsTrue(modbus.Write(address, floatTmp).IsSuccess);
float[] readFloat = modbus.ReadFloat(address, (ushort)floatTmp.Length).Content;
for (int i = 0; i < readFloat.Length; i++)
{
Assert.IsTrue(floatTmp[i] == readFloat[i]);
}
// double类型
Assert.IsTrue(modbus.Write(address, 1234.5434d).IsSuccess);
Assert.IsTrue(modbus.ReadDouble(address).Content == 1234.5434d);
double[] doubleTmp = new double[] { 1.4213d, 1223d, 452.5342d, 231.3443d };
Assert.IsTrue(modbus.Write(address, doubleTmp).IsSuccess);
double[] readDouble = modbus.ReadDouble(address, (ushort)doubleTmp.Length).Content;
for (int i = 0; i < doubleTmp.Length; i++)
{
Assert.IsTrue(readDouble[i] == doubleTmp[i]);
}
// long类型
Assert.IsTrue(modbus.Write(address, 123617231235123L).IsSuccess);
Assert.IsTrue(modbus.ReadInt64(address).Content == 123617231235123L);
long[] longTmp = new long[] { 12312313123L, 1234L, 412323812368L, 1237182361238123 };
Assert.IsTrue(modbus.Write(address, longTmp).IsSuccess);
long[] readLong = modbus.ReadInt64(address, (ushort)longTmp.Length).Content;
for (int i = 0; i < longTmp.Length; i++)
{
Assert.IsTrue(readLong[i] == longTmp[i]);
}
// ulong类型
Assert.IsTrue(modbus.Write(address, 1283823681236123UL).IsSuccess);
Assert.IsTrue(modbus.ReadUInt64(address).Content == 1283823681236123UL);
ulong[] ulongTmp = new ulong[] { 21316UL, 1231239127323UL, 1238612361283123UL };
Assert.IsTrue(modbus.Write(address, ulongTmp).IsSuccess);
ulong[] readULong = modbus.ReadUInt64(address, (ushort)ulongTmp.Length).Content;
for (int i = 0; i < readULong.Length; i++)
{
Assert.IsTrue(readULong[i] == ulongTmp[i]);
}
// string类型
Assert.IsTrue(modbus.Write(address, "123123").IsSuccess);
Assert.IsTrue(modbus.ReadString(address, 3).Content == "123123");
// byte类型
byte[] byteTmp = new byte[] { 0x4F, 0x12, 0x72, 0xA7, 0x54, 0xB8 };
Assert.IsTrue(modbus.Write(address, byteTmp).IsSuccess);
Assert.IsTrue(SoftBasic.IsTwoBytesEquel(modbus.Read(address, 3).Content, byteTmp));
modbus.Close( );
}
//MudbusRTU设备初始化
void DoInitMudbusRtu(LD.Config.PlcTypeItem item)
{
// 连接
byte station;
if (!byte.TryParse(item.Station, out station))
{
MessageBox.Show(string.Format("station {0} input is wrong！", item.Station));
return;
}
int baudRate;
if (!int.TryParse(item.BaudRate.ToString(), out baudRate))
{
MessageBox.Show(string.Format("baudRate {0} input wrong！", item.BaudRate));
return;
}
int dataBits;
if (!int.TryParse(item.DataBits.ToString(), out dataBits))
{
MessageBox.Show(string.Format("dataBits {0} input wrong！", item.DataBits));
return;
}
int stopBits;
if (!int.TryParse(item.StopBits.ToString(), out stopBits))
{
MessageBox.Show(string.Format("stopBits {0} input wrong！", item.StopBits));
return;
}
ModbusRtu busRtuClient = new ModbusRtu(station);
busRtuClient.AddressStartWithZero = item.AddressStartWithZero;
if (busRtuClient != null)
{
busRtuClient.DataFormat = item.DataFormat;
}
busRtuClient.IsStringReverse = item.IsStringReverse;
busRtuClient.SerialPortInni(sp =>
{
sp.PortName = item.PortName;
sp.BaudRate = baudRate;
sp.DataBits = dataBits;
sp.StopBits = stopBits == 0 ? StopBits.None : (stopBits == 1 ? StopBits.One : StopBits.Two);
sp.Parity = item.Parity;
});
item.Tag = busRtuClient;
busRtuClient.Open();
if (busRtuClient.IsOpen())
{
item.IsConnected = true;
//Plcs.Add(item.DevName, busRtuClient);
}
else
{
item.IsConnected = false;
}
}
private void Form1_Load(object sender, EventArgs e)
{
try
{
//温度压力串口配置
busRtuClient.SerialPortInni(sp =>
{
port4();
#region 温度串口配置
//sp.PortName = "COM6";
//sp.BaudRate = 9600;
//sp.DataBits = 8;
//sp.StopBits = System.IO.Ports.StopBits.One;
//sp.Parity = System.IO.Ports.Parity.None;
#endregion
DateTimeThreadFunction = new ThreadStart(DateTimeTimer);
DateTimeThreadClass = new Thread(DateTimeThreadFunction);
DateTimeThreadClass.Start();
});
//打开串口
busRtuClient.Open();
}
catch (Exception ex)
{
Common.LogHandler.WriteLog("温度压力串口获取失败");
}
try
{
PressureValue();
}
catch (Exception)
{
Common.LogHandler.WriteLog("压力值获取失败");
throw;
}
//电压端口
try
{
Modbus_dianya.SerialPortInni(sp =>
{
port6();
#region 电压串口配置
//sp.PortName = "COM6";
//sp.BaudRate = 2400;
//sp.DataBits = 8;
//sp.StopBits = System.IO.Ports.StopBits.One;
//sp.Parity = System.IO.Ports.Parity.Even;
#endregion
});
Modbus_dianya.Open();
try
{
VoltageValue();
}
catch (Exception)
{
Common.LogHandler.WriteLog("电压值获取失败");
}
}
catch (Exception ex)
{
Common.LogHandler.WriteLog("电压串口获取失败");
}
}