public override void Initialise(Document doc)
{
Application.DocumentManager.MdiActiveDocument = doc;
using (DocumentLock issueDocumentLock = doc.LockDocument())
using (Transaction trans = doc.TransactionManager.StartTransaction())
{
LayoutSheetController controller = new LayoutSheetController(_logger, doc.Database, _settings);
LayoutSheet newSheet = controller.AddLayout("000 - PFA", PaperSize.A1Landscape);
newSheet.TitleBlock.DrawingNumber = "000";
newSheet.TitleBlock.Revision = "P1";
newSheet.TitleBlock.ProjectNumber = ParentController.ProjectNumber;
newSheet.TitleBlock.Project = ParentController.ProjectName;
newSheet.TitleBlock.Client = ParentController.Client;
newSheet.TitleBlock.Title = "Preliminary Foundation Assessment";
newSheet.TitleBlock.DrawnBy = "DRA";
newSheet.TitleBlock.Date = DateTime.Now.ToString("MMMM yy");
ViewportDrawingObject viewport = newSheet.DrawingArea.AddFullViewport();
BlockReference conceptFoundations = this.ParentController.GetXref <FoundationXrefDrawingType>().AddToDrawingAsXref(doc);
viewport.FocusOn(_settings, conceptFoundations.GeometricExtents);
controller.RemoveDefaultLayouts();
trans.Commit();
}
}
public AnimationCurve curve; //動畫曲線
//建構子
public LayoutSettingEventArgs(LayoutSheet data, int visibleCount, UnityEngine.Vector2 spacing, AnimationCurve ac)
{
layoutData = data;
visibleElementCount = visibleCount;
elementSpacing = spacing;
curve = ac;
}
//---------------------------------------------------------------------------------------------------------------------------------------------
//追加並自動計算UI布局資料
//[param] sc = 捲軸長度 , vc = 可視圖格長度 , es = 圖格間隔 , sh = 捲軸高度 , isApply = 是否套用
public LayoutSheet CalculateLayoutData(int sc, int vc, Vector2 es, float sh, bool isApply)
{
if (panelRect == null)
{
panelRect = ScrollManager.Instance.scrollHolder.GetComponent <RectTransform>();
}
if (panelLg == null)
{
panelLg = ScrollManager.Instance.scrollHolder.GetComponent <HorizontalLayoutGroup>();
}
LayoutSheet _data = new LayoutSheet(sc, vc, es, sh);
float _pw = panelRect.rect.width; //面板區域寬度
float _ph = panelRect.rect.height; //面板區域高度
float _pl = panelLg.padding.left; //面板間隔(左)
float _pr = panelLg.padding.right; //面板間隔(右)
float _pb = panelLg.padding.bottom; //面板間隔(下)
float _pt = panelLg.padding.top; //面板間隔(上)
float _ps = panelLg.spacing; //面板中間間隔寬度
Vector2 _ld = ScrollManager.Instance.anchor_leftDown.position; //面板左下角位置
Vector2 _ru = ScrollManager.Instance.anchor_rightUp.position; //面板右上角位置
//計算捲軸寬度
float scrollWidth = (_pw - _pl - _pr - ((sc - 1) * _ps)) / sc;
//計算圖格尺寸
float _esz_x = scrollWidth - (es.x * 2);
float _esz_y = (sh - (es.y * (vc + 1))) / vc;
Vector2 elementSize = new Vector2(_esz_x, _esz_y);
//計算圖格位置陣列
float leftDownPos_x = (((_ru.x - _ld.x) * (_pl + es.x + (_esz_x / 2))) / _pw) + _ld.x; //左下圖格位置(X軸)
float leftDownPos_y = (((_ru.y - _ld.y) * (_pb + es.y + (_esz_y / 2))) / _ph) + _ld.y; //左下圖格位置(Y軸)
Vector2 leftDownPos = new Vector2(leftDownPos_x, leftDownPos_y);
float rightUpPos_x = (((_ld.x - _ru.x) * (_pr + es.x + (_esz_x / 2))) / _pw) + _ru.x; //右上圖格位置(X軸)
float rightUpPos_y = (((_ld.y - _ru.y) * (_pt + es.y + (_esz_y / 2))) / _ph) + _ru.y; //右上圖格位置(Y軸)
Vector2 rightUpPos = new Vector2(rightUpPos_x, rightUpPos_y);
//套用計算結果
_data.scrollWidth = scrollWidth;
_data.elementSize = elementSize;
_data.elementPos_leftDown = leftDownPos;
_data.elementPos_rightUp = rightUpPos;
if (isApply)
{
ApplyData = _data;
}
return(_data);
}
//(協程)UI布局設定
//[param] originData = 原資料 , newData = 欲套用資料 , duration = 動畫時間
public IEnumerator Cor_SetUILayout(LayoutSheet originData, LayoutSheet newData, float duration = 0)
{
float _scrollLength = elementChain.Count * (newData.elementSize.y + newData.ElementSpacing.y);
float _handleAreaHeight = _scrollLength - (newData.ScrollHeight - newData.ElementSpacing.y);
if (duration <= 0 || !this.gameObject.activeSelf) //無動畫
{
elementHolder.spacing = newData.ElementSpacing; //設定圖格間隔
elementHolder.cellSize = newData.elementSize; //設定圖格尺寸
sliderHandleArea.offsetMax = new Vector2(sliderHandleArea.offsetMax.x, newData.ElementSpacing.y); //設定捲軸滾動區域位移量
}
else //有動畫
{
Vector2 _sizeTarget = invalidAnimation ? new Vector2(0, newData.elementSize.y) : newData.elementSize;
Sequence sq_layoutVariation = DOTween.Sequence()
.OnStart(() =>
{
elementHolder.spacing = originData.ElementSpacing; //圖格間隔初始化
elementHolder.cellSize = originData.elementSize; //圖格尺寸初始化
})
.Append(DOTween.To(() => elementHolder.spacing, (x) => elementHolder.spacing = x, newData.ElementSpacing, duration))
.Join(DOTween.To(() => elementHolder.cellSize, (x) => elementHolder.cellSize = x, _sizeTarget, duration))
.Join(DOTween.To(() => sliderHandleArea.offsetMax, (x) => sliderHandleArea.offsetMax = x, new Vector2(sliderHandleArea.offsetMax.x, newData.ElementSpacing.y), duration))
.SetEase(Ease.Unset);
yield return(sq_layoutVariation.WaitForCompletion());
}
sliderHandleArea.sizeDelta = new Vector2(sliderHandleArea.sizeDelta.x, _handleAreaHeight);
//重設圖格碰撞體大小
for (int i = 0; i < elementChain.Count; i++)
{
elementChain[i].SetColliderSize(newData.elementSize);
}
if (invalidAnimation) //無效化動畫執行中
{
yield return(tween_invalid.WaitForCompletion()); //等待無效化動畫執行完畢
invalidAnimation = false;
this.gameObject.SetActive(false); //隱藏物件
}
}
public void SpsDoc(int n_str, string text, string dat, int n_doc)
{
IKompasDocument doc = appl.Documents.Open(path[n_doc], true, false);// Получаем интерфейс активного документа 2D в API7
ksSpcDocument DocS = (ksSpcDocument)kompas.SpcActiveDocument();
ksStamp stamp = DocS.GetStamp();
stamp.ksOpenStamp();
//_______________________________________
LayoutSheets _ls = doc.LayoutSheets;
LayoutSheet LS = _ls.ItemByNumber[1];
var q = _ls.ItemByNumber[1].Stamp;
IStamp isamp = LS.Stamp;
IText qq = isamp.Text[10];
Console.WriteLine("Есть ли руковод ------------- " + qq.Str);
//________________________________________
stamp.ksColumnNumber(120);
ksTextItemParam itemParam = (ksTextItemParam)kompas.GetParamStruct((short)StructType2DEnum.ko_TextItemParam);
if (itemParam != null)
{
itemParam.Init();
ksTextItemFont itemFont = (ksTextItemFont)itemParam.GetItemFont();
if (itemFont != null)
{
itemFont.SetBitVectorValue(ldefin2d.NEW_LINE, true);
itemFont.fontName = "Staccato222 BT";
itemParam.s = "44444";
stamp.ksTextLine(itemParam);
}
}
stamp.ksCloseStamp();
}
public TitleResponse TestReadingTitleBlockResident(string layoutName)
{
using (Transaction trans =
Application.DocumentManager.MdiActiveDocument.TransactionManager.StartTransaction())
{
Layout target = Application.DocumentManager.MdiActiveDocument.Database.GetLayout(layoutName);
LayoutSheet layoutSheet = new LayoutSheet(null, target);
TitleResponse response = new TitleResponse()
{
Title = layoutSheet.TitleBlock.Title,
Client = layoutSheet.TitleBlock.Client,
Project = layoutSheet.TitleBlock.Project,
DrawingNumber = layoutSheet.TitleBlock.DrawingNumber,
ProjectNumber = layoutSheet.TitleBlock.ProjectNumber,
Revision = layoutSheet.TitleBlock.Revision,
};
return(response);
}
}
public void Doc2D(int n_str, int n_str_dat, string text, string dat, int n_doc, bool ruk = false)
{
IKompasDocument doc = appl.Documents.Open(path[n_doc], true, false);// Получаем интерфейс активного документа 2D в API7
ksDocument2D docD = (ksDocument2D)kompas.ActiveDocument2D();
ksStamp stamp = (ksStamp)docD.GetStamp();
Console.WriteLine("функция Doc2D ");
stamp.ksOpenStamp();
//_____________________________________________________________
LayoutSheets _ls = doc.LayoutSheets;
LayoutSheet LS = _ls.ItemByNumber[1];
IStamp isamp = LS.Stamp;
IText qq = isamp.Text[10];
Console.WriteLine("Есть ли руководитель ------------- " + qq.Str);
//_____________________________________________________________
stamp.ksColumnNumber(n_str);
ksTextItemParam itemParam = (ksTextItemParam)kompas.GetParamStruct((short)StructType2DEnum.ko_TextItemParam);
if (itemParam != null)
{
itemParam.Init();
ksTextItemFont itemFont = (ksTextItemFont)itemParam.GetItemFont();
if (itemFont != null)
{
itemFont.SetBitVectorValue(ldefin2d.NEW_LINE, true);
itemParam.s = text;
docD.ksTextLine(itemParam);
}
}
stamp.ksColumnNumber(n_str_dat);
if (itemParam != null)
{
itemParam.Init();
ksTextItemFont itemFont = (ksTextItemFont)itemParam.GetItemFont();
if (itemFont != null)
{
itemFont.SetBitVectorValue(ldefin2d.NEW_LINE, true);
itemParam.s = dat;
docD.ksTextLine(itemParam);
}
}
if (ruk == true)
{
stamp.ksColumnNumber(123);
if (itemParam != null)
{
itemParam.Init();
ksTextItemFont itemFont = (ksTextItemFont)itemParam.GetItemFont();
if (itemFont != null)
{
itemFont.SetBitVectorValue(ldefin2d.NEW_LINE, true);
itemParam.s = textBox2.Text;
docD.ksTextLine(itemParam);
}
}
stamp.ksColumnNumber(133);
if (itemParam != null)
{
itemParam.Init();
ksTextItemFont itemFont = (ksTextItemFont)itemParam.GetItemFont();
if (itemFont != null)
{
itemFont.SetBitVectorValue(ldefin2d.NEW_LINE, true);
itemParam.s = dat;
docD.ksTextLine(itemParam);
}
}
}
stamp.ksCloseStamp();
//doc.Close(0); //Закрыть документ
}
//設置捲軸區域(協程)
//[param] scrollCount = 捲軸數量, visibleCount = 可視圖格數量, elementChainGroup = 各捲軸圖格鍊, isAnimation = 是否啟用動畫
private IEnumerator Cor_SetScrollAreaLayout(int scrollCount, int visibleCount, Vector2 spacing, List <List <ElementImageType> > elementChainGroup, bool isAnimation, LotteryLineSetting lineSetting = null)
{
//判斷UI介面是否重新調整
RectTransform panelRect = scrollHolder.GetComponent <RectTransform>();
HorizontalLayoutGroup panelLg = scrollHolder.GetComponent <HorizontalLayoutGroup>();
float scrollHeight = panelRect.rect.height - panelLg.padding.top - panelLg.padding.bottom; //取得捲軸區域高度
//設定更新前後布局資料
LayoutSheet originData = new LayoutSheet(0, 0, Vector2.zero, 0); //改變前布局資料
LayoutSheet newData = new LayoutSheet(0, 0, Vector2.zero, 0); //新的布局資料
bool isLayoutReset = false; //布局參數是否重置
bool _isAnimation = isAnimation; //布局更新啟用動畫
if (layoutData.ApplyData == null) //初始化的狀況
{
isLayoutReset = true;
_isAnimation = false; //初始化時強制不使用動畫
}
else if (layoutData.ApplyData.MatchTest(scrollCount, visibleCount, spacing, scrollHeight) == false) //更新參數的狀況
{
isLayoutReset = true;
originData = layoutData.ApplyData;
}
if (isLayoutReset)
{
layoutData.CalculateLayoutData(scrollCount, visibleCount, spacing, scrollHeight, true); //如果有改變則套用新的參數資料
}
newData = layoutData.ApplyData;
//設定捲軸數量
if (isLayoutReset)
{
this.scrollCount = scrollCount; //校正Editor參數
//重新設定捲軸數量
SetScrollCount(_isAnimation);
}
//設定捲軸圖格鍊
if (elementChainGroup == null) //不指定圖格鍊時
{
for (int i = 0; i < scrollGroup.Count; i++)
{
if ((scrollGroup[i].elementChain == null || scrollGroup[i].elementChain.Count == 0) && defaultElementChain != null) //若捲軸沒有設定圖格鍊, 則套用預設圖格鍊
{
scrollGroup[i].SetElementChain(defaultElementChain, visibleCount);
}
if (isLayoutReset) //重新調整布局
{
scrollGroup[i].SetElementChain(null, visibleCount); //若可視圖格長度有變動, 則捲軸的尾部也會跟著變動
}
}
}
else //有指定圖格鍊時
{
if (elementChainGroup.Count != scrollCount)
{
throw new System.Exception("[ERROR]圖格鍊數量與捲軸數量不符");
}
for (int i = 0; i < scrollGroup.Count; i++) //設定各捲軸的圖格鍊
{
scrollGroup[i].SetElementChain(elementChainGroup[i], visibleCount);
}
}
//設置位置偵測器
SetPostionSensor(layoutData.ApplyData.elementPos_leftDown, layoutData.ApplyData.elementPos_rightUp, scrollCount, visibleCount);
//中獎線重新設置
LotteryLineManager.Instance.SettingInitialize(lineSetting);
//設定可視圖格數&調整UI
if (isLayoutReset)
{
this.visibleElementCount = visibleCount; //校正Editor參數
this.elementSpacing = spacing; //校正Editor參數
for (int i = 0; i < scrollGroup.Count; i++)
{
if (_isAnimation) //有動畫
{
if ((previousSpinResult != null && previousSpinResult.Count > 0) && (originData.VisibleCount != newData.VisibleCount)) //若拉霸結果有儲存紀錄, 且可視圖格數量有改變, 則將slider.value設為0(拉至最下方), 以防動畫演示出現Bug
{
List <ElementImageType> _nowElements = new List <ElementImageType>(); //該捲軸目前的顯示圖格
for (int j = 0; j < previousSpinResult.Count; j++)
{
if ((int)previousSpinResult[j].coordinate.x == i)
{
_nowElements.Add(previousSpinResult[j].elementType); //將目前顯示圖格中X軸(列號)符合的項目加入列表
}
}
scrollGroup[i].ResetScrollPosition(_nowElements, visibleCount); //重置捲軸
}
if (i == scrollGroup.Count - 1) //等待最後一個捲軸的動畫撥放完成
{
yield return(StartCoroutine(scrollGroup[i].Cor_SetUILayout(originData, newData, layoutAnimationDuration)));
}
else
{
StartCoroutine(scrollGroup[i].Cor_SetUILayout(originData, newData, layoutAnimationDuration));
}
}
else
{
StartCoroutine(scrollGroup[i].Cor_SetUILayout(null, layoutData.ApplyData)); //無動畫
}
}
}
yield return(null);
}
public void START()
{
int stolb = 1; // A - B - C - D //Cells(5, 3) = C5
int stroka = 1; // 1-2-3
int nomer_Sps = 1;
spec_stroka[] Spisok_dok = new spec_stroka[1500];
//for (int i1 = 0; i1 <1000;i1++)
//{
// Sps[i1] = new spec_stroka();
//}
Console.WriteLine("Количество документов = " + path.Count);
for (int i = 0; i < path.Count; i++)
{
IKompasDocument doc = appl.Documents.Open(path[i], false, false);// Получаем интерфейс активного документа 2D в API7
Console.WriteLine("Получение спецификации из документа № - " + Convert.ToInt32(i + 1));
SpecificationDescription Specification_Descriptions = doc.SpecificationDescriptions.Active;
if (Specification_Descriptions != null)
{
ISpecificationCommentObjects SpcObjects = Specification_Descriptions.CommentObjects;
ISpecificationBaseObjects SpcObjectsBase = Specification_Descriptions.BaseObjects;
//Console.WriteLine(" ВСПОМОГАТЕЛЬНЫЕ объекты " + SpcObjects.Count);
//Console.WriteLine(" Базовые объекты " + SpcObjectsBase.Count);
int kol_com = SpcObjects.Count;
int kol_base = SpcObjectsBase.Count;
if (kol_com == 0 & kol_base > 0)
{
tip_obj_base = true;
num = kol_base;
}
if (kol_base == 0 & kol_com > 0)
{
tip_obj_base = false;
num = kol_com;
}
ISpecificationObject Specification_Object;
ISpecificationColumns Specification_Columns;
ISpecificationColumn Specification_Column;
// Начало блока вспомагательных объктов
for (int SD = 0; SD < num; SD++)
{
Console.WriteLine("----- Строка " + (SD + 1) + " ---- ");
Console.WriteLine("");
//var ww = SpcObjects[SD];
if (!tip_obj_base)
{
ISpecificationCommentObject obj = SpcObjects[SD];
var OBJ = obj;
ISpecificationColumns oC = obj.Columns;
int qq = obj.Section;
Console.WriteLine("!!!!СЕКЦИЯ " + (qq) + " !!!!!");
Specification_Object = obj;
nomer_razdela = qq;
//5 - документация 10 - комплексы 15 - сборочные единицы 20 - детали 25 - стандартные изделия 30 - прочие изделия 35 - материалы 40 - комплекты
}
else
{
ISpecificationBaseObject obj_base = SpcObjectsBase[SD];
var OBJ = obj_base;
ISpecificationColumns oC = obj_base.Columns;
int qq = obj_base.Section;
Console.WriteLine("!!!!СЕКЦИЯ " + (qq) + " !!!!!");
Specification_Object = obj_base;
nomer_razdela_base = qq;
}
if (((nomer_razdela == 5) | (nomer_razdela_base == 5)) & (i != 0))
{
Console.WriteLine("----------------Пропуск раздела документация-------------------");
continue;
}
else
{
Sps[nomer_Sps] = new spec_stroka();
Sps[nomer_Sps].doc_name = ObrezFileName(path[i]);
Sps[nomer_Sps].sortir = false;
if (nomer_razdela == 5 | nomer_razdela_base == 5)
{
Sps[nomer_Sps].tip_stroki = "CБ";
Console.WriteLine("----------------Запись раздела документация ГЛАВНОГО ДОКУМЕНТА-------------------");
}
if (nomer_razdela == 15 | nomer_razdela_base == 15)
{
Sps[nomer_Sps].tip_stroki = "CБ";
}
if (nomer_razdela == 25 | nomer_razdela_base == 25)
{
Sps[nomer_Sps].tip_stroki = "СТ";
}
if (nomer_razdela == 30 | nomer_razdela_base == 30)
{
Sps[nomer_Sps].tip_stroki = "П";
}
if (nomer_razdela == 35 | nomer_razdela_base == 35)
{
Sps[nomer_Sps].tip_stroki = "М";
}
Specification_Columns = Specification_Object.Columns;
for (int bCol = 0; bCol < Specification_Columns.Count; bCol++)
{
Specification_Column = Specification_Columns[bCol];
var st = Specification_Column.Text.Str;
Console.WriteLine("Столбец " + (bCol + 1) + " - " + st);
//Заполнение ///////////////////////////////////// ///////////////////////////
//sheet.Cells[stroka, stolb] = st;
if (nomer_razdela == 20 | nomer_razdela_base == 20)
{
if (bCol == 0)
{
if (st != "БЧ")
{
Sps[nomer_Sps].tip_stroki = "Д";
}
else
{
Sps[nomer_Sps].tip_stroki = "БЧ";
}
}
}
switch (bCol)
{
case 0:
Sps[nomer_Sps].format = st;
break;
case 2:
Sps[nomer_Sps].poz = st;
break;
case 3:
//Sps[nomer_Sps].obozn = st;
Sps[nomer_Sps].obozn = ObrezSB(st);
break;
case 4:
//Sps[nomer_Sps].naimen = st;
if (nomer_razdela == 5 | nomer_razdela_base == 5)
{
Sps[nomer_Sps].naimen = textBox4.Text;
}
else
{
Sps[nomer_Sps].naimen = Regex.Replace(st, @"[ \n]", " ");
}
break;
case 5:
Sps[nomer_Sps].kol = st;
break;
case 6:
Sps[nomer_Sps].prim = st;
break;
}
//stolb += 1;
}
Console.WriteLine("----- Конец cтроки ---- ");
// stolb = 1;
//stroka += 1;
nomer_Sps += 1;
nomer_razdela = 0;
nomer_razdela_base = 0;
}
}
if (doc != null)
{
doc.Close(0); //Закрыть документ
}
}
else
{
Console.WriteLine("Пропущен документ (документ не спецификации, и не на чертеже)");
if (doc != null)
{
ksDocument2D docD = (ksDocument2D)kompas.ActiveDocument2D();
ksStamp stamp = (ksStamp)docD.GetStamp();
LayoutSheets _ls = doc.LayoutSheets;
LayoutSheet LS = _ls.ItemByNumber[1];
IStamp isamp = LS.Stamp;
IText qq = isamp.Text[3];
IText ww = isamp.Text[2];
Console.WriteLine("ШТАМП Материал ------------- " + qq.Str);
Console.WriteLine("ШТАМП Обозначение ------------- " + ww.Str);
Sps[nomer_Sps] = new spec_stroka();
Sps[nomer_Sps].doc_name = ObrezFileName(path[i]);
Sps[nomer_Sps].obozn = ww.Str;
Sps[nomer_Sps].tip_stroki = "Материал из детали";
Sps[nomer_Sps].material = qq.Str;
Sps[nomer_Sps].sortir = false;
nomer_Sps += 1;
doc.Close(0); //Закрыть документ
}
}
doc.Close(0);
Console.WriteLine("");
Console.WriteLine("-Проверка-");
}
////////////////////////////////////////////////////////////////////////////////////////
//sheet.Columns["D:D"].ColumnWidth = 16.0;
// sheet.Columns["E:E"].ColumnWidth = 25.0;
try
{
//ex.Application.ActiveWorkbook.SaveAs("D:\\1111111111111111111.xlsx", Type.Missing,
// Type.Missing, Type.Missing, Type.Missing, Type.Missing, Excel.XlSaveAsAccessMode.xlNoChange,
//Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
}
catch
{
MessageBox.Show("Сперва закройте БазуНСИ");
}
///////////////////////////////////////////
/*
*
* workBook = null;
* sheet = null;
* //ex.Quit();
* ex = null;
* GC.Collect();
*
*/
for (int i2 = 0; i2 < 1500; i2++)
{
if (Sps[i2] != null)
{
if (Sps[i2].sortir != null)
{
Sps[i2].GetInfoSst();
}
}
}
}