//------------------------------------------------------------------------------
//Callback Name: apply_cb
//------------------------------------------------------------------------------
public int apply_cb()
{
int errorCode = 0;
try
{
//---- Enter your callback code here -----
Session.UndoMarkId markId = Session.GetSession().SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "删除电极");
ElectrodeModel ele = new ElectrodeModel();
NXOpen.Assemblies.Component eleComp = this.selection_Ele.GetSelectedObjects()[0] as NXOpen.Assemblies.Component;
Part elePart = eleComp.Prototype as Part;
ele.GetModelForPart(elePart);
int ok = theUI.NXMessageBox.Show("删除", NXOpen.NXMessageBox.DialogType.Question, elePart.Name + "电极是否删除");
if (ok == 1)
{
string path = elePart.FullPath;
elePart.Close(NXOpen.BasePart.CloseWholeTree.False, NXOpen.BasePart.CloseModified.UseResponses, null);
AssmbliesUtils.DeleteComponent(eleComp);
LayerUtils.MoveDisplayableObject(ele.EleInfo.EleNumber + 10, LayerUtils.GetAllObjectsOnLayer(ele.EleInfo.EleNumber + 100));
if (File.Exists(path))
{
File.Delete(path);
}
}
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
errorCode = 1;
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
return(errorCode);
}
private void GetBoundingBox()
{
Point3d centerPt = new Point3d();
Point3d disPt = new Point3d();
Part workPart = Session.GetSession().Parts.Work;
List <Body> bodys = new List <Body>();
// NXOpen.Assemblies.Component ct = AssmbliesUtils.GetPartComp(workPart, part)[0];
foreach (NXOpen.Assemblies.Component ct in AssmbliesUtils.GetPartComp(workPart, part))
{
if (!ct.IsSuppressed)
{
foreach (Body body in this.part.Bodies.ToArray())
{
bodys.Add(AssmbliesUtils.GetNXObjectOfOcc(ct.Tag, body.Tag) as Body);
}
}
}
Matrix4 invers = workMatr.GetInversMatrix();
CartesianCoordinateSystem csys = BoundingBoxUtils.CreateCoordinateSystem(workMatr, invers);//坐标
BoundingBoxUtils.GetBoundingBoxInLocal(bodys.ToArray(), csys, workMatr, ref centerPt, ref disPt);
LayerUtils.MoveDisplayableObject(201, bodys.ToArray());
this.CenterPt = centerPt;
this.DisPt = disPt;
}
public bool DeleteBuilder()
{
Part workPart = Session.GetSession().Parts.Work;
List <NXOpen.Assemblies.Component> eleCom = GetEleAllComponent();
ElectrodeModel eleModel = new ElectrodeModel(elePart);
int eleNumber = eleModel.Info.AllInfo.Name.EleNumber;
string path = elePart.FullPath;
if (eleCom != null)
{
Part work = GetEleWorkPart(eleCom);
if (work != null)
{
PartUtils.SetPartDisplay(work);
NXObject[] objs = LayerUtils.GetAllObjectsOnLayer(eleNumber + 100);
LayerUtils.MoveDisplayableObject(eleNumber + 10, objs);
}
PartUtils.SetPartDisplay(workPart);
Part elePart = eleCom[0].Prototype as Part;
AssmbliesUtils.DeleteComponent(eleCom.ToArray());
elePart.Close(BasePart.CloseWholeTree.False, BasePart.CloseModified.CloseModified, null);
if (File.Exists(path))
{
File.Delete(path);
}
return(true);
}
return(false);
}
private void SetLayer(int layer)
{
List <Body> eleBy = model.GetEleBody();
if (eleBy.Count > 0)
{
LayerUtils.MoveDisplayableObject(layer, eleBy.ToArray());
}
List <Body> workpieceBody = model.GetWorkpieceBody();
if (workpieceBody.Count > 0)
{
LayerUtils.MoveDisplayableObject(layer, workpieceBody.ToArray());
}
List <Line> xLine = model.GetXLine();
if (xLine.Count > 0)
{
LayerUtils.MoveDisplayableObject(layer, xLine.ToArray());
}
List <Line> yLine = model.GetYLine();
if (yLine.Count > 0)
{
LayerUtils.MoveDisplayableObject(layer, yLine.ToArray());
}
}
/// <summary>
/// 更新图纸
/// </summary>
public void UpdateDrawing()
{
string dwgName = eleModel.Info.AllInfo.Name.EleName + "_dwg";
string path = eleModel.WorkpieceDirectoryPath + dwgName + ".prt";
if (!File.Exists(path))
{
return;
}
Part dwg = null;
foreach (Part part in Session.GetSession().Parts)
{
if (part.Name.ToUpper().Equals(dwgName.ToUpper()))
{
dwg = part;
break;
}
}
if (dwg == null)
{
if (File.Exists(path))
{
dwg = PartUtils.OpenPartFile(path);
}
}
if (dwg != null)
{
newAllInfo.SetAttribute(dwg);
string temp = newAllInfo.Preparetion.Preparation[0].ToString() + "*" + newAllInfo.Preparetion.Preparation[1].ToString() + "*" + newAllInfo.Preparetion.Preparation[2].ToString();
AttributeUtils.AttributeOperation("StrPre", temp, dwg);
if (!oldAllInfo.Pitch.IsEquals(newAllInfo.Pitch))
{
PartUtils.SetPartDisplay(dwg);
LayerUtils.MoveDisplayableObject(201, GetDrawingBody(dwg).ToArray());
foreach (NXOpen.Drawings.DrawingSheet sh in dwg.DrawingSheets)
{
Basic.DrawingUtils.UpdateViews(sh);
}
}
if (!oldAllInfo.Preparetion.IsEquals(newAllInfo.Preparetion))
{
foreach (NXOpen.Drawings.DrawingSheet sh in dwg.DrawingSheets)
{
Basic.DrawingUtils.UpdateViews(sh);
}
}
newAllInfo.SetAttribute(dwg);
PartUtils.SetPartDisplay(asm);
}
}
/// <summary>
///检查体
/// </summary>
/// <returns></returns>
public BodyInfo GetBodyInfoForInterference(bool extract, out List <string> err)
{
err = new List <string>();
List <Face> dischargeFace = new List <Face>();
List <Face> temp = new List <Face>();
List <Body> bodys = new List <Body>();
try
{
AnalysisUtils.SetInterferenceOutFace(this.eleBody, this.toolBody, out temp, out bodys);
}
catch (NXException ex)
{
err.Add("干涉检查错误！" + ex.Message);
}
if (bodys.Count > 0)
{
LayerUtils.MoveDisplayableObject(252, bodys.ToArray());
if (extract)
{
this.eleBody.Color = 186;
}
err.Add("电极头有过切，请检查！");
}
dischargeFace = temp.Where(a => a.GetBody().Equals((this.eleBody))).Distinct().ToList(); //过滤电极面
List <Face> tt = temp.Where(a => a.GetBody().Equals((this.toolBody))).Distinct().ToList();
List <Face> faces = new List <Face>();
foreach (Face fe in dischargeFace)
{
FaceData data1 = FaceUtils.AskFaceData(fe);
foreach (Face fa in tt)
{
FaceData fd = FaceUtils.AskFaceData(fa);
if (UMathUtils.SelfDis(data1.Dir) == 0)
{
if (data1.FaceType == fd.FaceType && data1.IntNorm == -fd.IntNorm)
{
faces.Add(fe);
break;
}
}
else
{
double anlge = UMathUtils.Angle(data1.Dir, fd.Dir);
if (data1.FaceType == fd.FaceType && data1.IntNorm == -fd.IntNorm && UMathUtils.IsEqual(anlge, Math.PI))
{
faces.Add(fe);
break;
}
}
}
}
if (extract)
{
ExtractFace(this.toolBody, faces.ToArray());
}
BodyInfo info = new BodyInfo(eleBody, faces);
info.SetAttribute(csys, matr);
return(info);
}