public void Execute(string[] args)
{
try
{
if (IntExtensions.TryParseEx(args[0], out int address))
{
if (IntExtensions.TryParseEx(args[1], out int value))
{
m_Proc.WriteMemory(address, value);
m_Terminal.PrintString("\t" + args[0] + " = " + args[1] + '\n');
}
else if (FloatExtensions.TryParseEx(args[1], out float fVal))
{
m_Proc.WriteFloatToMemory(address, fVal);
m_Terminal.PrintString("\t" + args[0] + " = " + args[1] + '\n');
}
else
{
m_Terminal.PrintString(args[1] + " was not a valid 32 bit value.\n");
}
}
else
{
m_Terminal.PrintString(args[0] + " was not a valid 32 bit integer.\n");
}
}
catch (Exception ex)
{
m_Terminal.PrintString(ex.Message + '\n');
}
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
// we expect two arguments. if not, throw an ArgumentException
if (args.Length != 2)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 2, received " + args.Length + '.');
}
string rs1 = args[0].Trim();
string immediateStr = args[1].Trim();
int immediate = 0;
if (!IntExtensions.TryParseEx(immediateStr, out immediate))
{
throw new ArgumentException("auipc - argument 2 was non-integer immediate value.");
}
int rs1Reg = RegisterMap.GetNumericRegisterValue(rs1);
// shift this such that
int bitShiftedImm = immediate << 12;
int instruction = 0;
instruction |= bitShiftedImm;
instruction |= (rs1Reg << 7);
instruction |= 0x17;
var inList = new List <int>();
inList.Add(instruction);
return(inList);
}
/// <summary>
/// Takes an argument (e.g. 4(x9)) and parameterizes it into the offset component
/// and its numeric register ID.
/// </summary>
/// <param name="trimmedArgToken">The token to parameterize, with whitespace trimmed on both left/right sides.</param>
/// <returns>A parameterized register/offset structure.</returns>
public static ParameterizedInstructionArg ParameterizeArgument(string trimmedArgToken)
{
string[] parameterizedArgs = trimmedArgToken.Split(new[] { '(', ')' }, StringSplitOptions.RemoveEmptyEntries).Apply((str) => str.Trim()).ToArray();
// we should expect one or two arguments.
if (parameterizedArgs.Length != 1 && parameterizedArgs.Length != 2)
{
throw new ArgumentException(trimmedArgToken + " was not in a valid format.");
}
ParameterizedInstructionArg retVal = default(ParameterizedInstructionArg);
// if we have one argument, assume its the register name, and that the offset is 0.
if (parameterizedArgs.Length == 1)
{
int registerId = RegisterMap.GetNumericRegisterValue(parameterizedArgs[0]);
retVal = new ParameterizedInstructionArg(0, registerId);
}
else
{
bool isValidOffset = IntExtensions.TryParseEx(parameterizedArgs[0], out short offsetVal) && ((offsetVal & 0xF000) == 0);
if (!isValidOffset)
{
throw new ArgumentException(parameterizedArgs[0] + " is not a valid 12-bit offset.");
}
int registerId = RegisterMap.GetNumericRegisterValue(parameterizedArgs[1]);
retVal = new ParameterizedInstructionArg(offsetVal, registerId);
}
return(retVal);
}
public void Execute(string[] args)
{
try
{
string fmtString = args[1];
if (fmtString.Contains("\""))
{
fmtString = fmtString.Replace("\"", string.Empty);
}
fmtString = fmtString.Trim();
if (IntExtensions.TryParseEx(args[0], out int iValue))
{
int readData = m_Proc.ReadMemory(iValue);
m_Terminal.PrintString("\t" + args[0] + " = " + readData.ToString(fmtString) + '\n');
}
else
{
m_Terminal.PrintString(args[0] + " was not a valid 32 bit integer.\n");
}
}
catch (Exception ex)
{
m_Terminal.PrintString(ex.Message + '\n');
}
}
/// <summary>
/// Adds a half element to the object file.
/// </summary>
/// <param name="objFile">The object file to add to.</param>
/// <param name="fullText">The full text of the assembly line.</param>
/// <param name="declarationToken">The token specifying the declaration of the size parameter.</param>
private void AddShortElementToFile(BasicObjectFile objFile, string fullText, string declarationToken)
{
// find the token directly after the size directive
int substrBeginIdx = fullText.IndexOf(declarationToken) + declarationToken.Length;
string arguments = fullText.Substring(substrBeginIdx);
// split by commas.
string[] tokenizedArgs = arguments.Split(new[] { ',' });
tokenizedArgs = tokenizedArgs.Apply((str) => str.Trim()).ToArray();
// iterate through each element in the "array".
foreach (string token in tokenizedArgs)
{
// if it contains a ':' character, then this itself is an array of the initialized token.
if (token.Contains(':'))
{
string[] subtokens = token.Split(new[] { ':' }).Apply((str) => str.Trim()).ToArray();
if (subtokens.Length == 2)
{
int numElems = int.Parse(subtokens[1]);
// this syntax is wonky; we're trying to parse literal char elements
// as well as normal bytes here.
if (!IntExtensions.TryParseEx(subtokens[0], out short elemToAdd))
{
// see if we can resolve the string as a symbol.
Symbol sym = m_SymTbl.GetSymbol(subtokens[0]);
elemToAdd = (short)sym.Address;
}
for (int i = 0; i < numElems; ++i)
{
objFile.AddDataElement(elemToAdd);
}
}
else
{
throw new ArgumentException("Expected size parameter after ':' token.");
}
}
else
{
// otherwise, it should just be an element (without any size modifiers).
// just parse it and add it.
if (!IntExtensions.TryParseEx(token, out short elemToAdd))
{
// see if we can resolve the string as a symbol.
Symbol sym = m_SymTbl.GetSymbol(token);
elemToAdd = (short)sym.Address;
}
objFile.AddDataElement(elemToAdd);
}
}
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
// we expect three arguments. if not, throw an ArgumentException
if (args.Length != 3)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 3, received " + args.Length + '.');
}
string rd = args[0].Trim();
string rs1 = args[1].Trim();
string rs2 = args[2].Trim();
IEnumerable <int> returnVal = null;
int instruction = 0;
int rdReg = RegisterMap.GetNumericRegisterValue(rd);
int rs1Reg = RegisterMap.GetNumericRegisterValue(rs1);
int rs2Reg = 0;
try
{
rs2Reg = RegisterMap.GetNumericRegisterValue(rs2);
List <int> instructionList = new List <int>();
instruction |= (rs2Reg << 20);
instruction |= (rs1Reg << 15);
instruction |= (0x7 << 12);
instruction |= (rdReg << 7);
instruction |= 0x33;
instructionList.Add(instruction);
returnVal = instructionList;
}
catch (ArgumentException)
{
// try to parse the string as a number; maybe the user meant andi?
short immediate = 0;
bool isShort = IntExtensions.TryParseEx(rs2, out immediate);
if (isShort)
{
var immediateParser = new AndiProcessor();
returnVal = immediateParser.GenerateCodeForInstruction(address, args);
}
else
{
// otherwise, this is garbage; rethrow the value.
throw;
}
}
return(returnVal);
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
// we expect three arguments. if not, throw an ArgumentException
if (args.Length != 3)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 3, received " + args.Length + '.');
}
IEnumerable <int> returnVal = null;
int rdReg = RegisterMap.GetNumericRegisterValue(args[0]);
int rs1Reg = RegisterMap.GetNumericRegisterValue(args[1]);
int shiftAmt = 0;
bool isValidImmediate = IntExtensions.TryParseEx(args[2], out shiftAmt);
// ensure our shift amount is 5 bits or less.
isValidImmediate = isValidImmediate && ((shiftAmt & 0xFFFFFFE0) == 0);
var instructionList = new List <int>();
if (isValidImmediate)
{
int instruction = 0;
instruction |= (0x1 << 30);
instruction |= (shiftAmt << 20);
instruction |= (rs1Reg << 15);
instruction |= (0x5 << 12);
instruction |= (rdReg << 7);
instruction |= 0x13;
instructionList.Add(instruction);
returnVal = instructionList;
}
else
{
// otherwise, emit three instructions. load the upper 20 bits of the immediate into the destination register,
// bitwise-or it with the remaining 12 bits, and then shift the target register by the destination register.
var luiProc = new LuiProcessor();
instructionList.AddRange(luiProc.GenerateCodeForInstruction(address, new string[] { args[0], (shiftAmt >> 12).ToString() }));
int orImmVal = shiftAmt & 0xFFF;
var oriProc = new OriProcessor();
instructionList.AddRange(oriProc.GenerateCodeForInstruction(address, new string[] { args[0], orImmVal.ToString() }));
var sraProc = new SraProcessor();
instructionList.AddRange(sraProc.GenerateCodeForInstruction(address, new string[] { args[0], args[1], args[0] }));
}
return(returnVal);
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
if (args.Length != 3)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 3, received " + args.Length + '.');
}
IEnumerable <int> returnVal = null;
int instruction = 0;
int rdReg = RegisterMap.GetNumericRegisterValue(args[0]);
int rs1Reg = RegisterMap.GetNumericRegisterValue(args[1]);
int rs2Reg = 0;
try
{
rs2Reg = RegisterMap.GetNumericRegisterValue(args[2]);
List <int> instructionList = new List <int>();
instruction |= (rs2Reg << 20);
instruction |= (rs1Reg << 15);
// or opcode/funt3/funct7 = 0x33/0x6/0x0
instruction |= (0x6 << 12);
instruction |= (rdReg << 7);
instruction |= 0x33;
instructionList.Add(instruction);
returnVal = instructionList;
}
catch (ArgumentException)
{
// try parsing as ori instruction
int immediate = 0;
bool isShort = IntExtensions.TryParseEx(args[2], out immediate);
if (isShort)
{
var immediateParser = new OriProcessor();
returnVal = immediateParser.GenerateCodeForInstruction(address, args);
}
else
{
throw;
}
}
return(returnVal);
}
public void Execute(string[] args)
{
if (!IntExtensions.TryParseEx(args[0], out int pgmCounter))
{
// if the argument was not a program counter arg, try to find the source line.
string srcData = args[0];
string[] splitData = srcData.Split(':');
if (splitData.Length == 2)
{
for (int i = 0; i < 2; ++i)
{
splitData[i] = splitData[i].Trim();
}
int srcLineNum = int.Parse(splitData[1]);
bool found = false;
foreach (var srcLine in m_SrcData.Values)
{
if (srcLine.SourceFilePath == splitData[0] && srcLine.SourceLineNumber == srcLineNum)
{
pgmCounter = srcLine.ProgramCounterLocation;
found = true;
break;
}
}
if (!found)
{
m_Terminal.PrintString("Could not attach breakpoint to line " + srcLineNum + " of file " + splitData[0] + '\n');
}
}
}
if (m_SrcData.ContainsKey(pgmCounter))
{
m_Exec.SetBreakpoint(pgmCounter);
m_Terminal.PrintString("Successfully attached breakpoint to source address 0x" + pgmCounter.ToString("x8") + '\n');
}
else
{
m_Terminal.PrintString("Could not attach breakpoint to given source address.\n");
}
}
public void Execute(string[] args)
{
try
{
if (IntExtensions.TryParseEx(args[0], out int iValue))
{
int readData = m_Proc.ReadMemory(iValue);
m_Terminal.PrintString("\t" + args[0] + " = " + readData + '\n');
}
else
{
m_Terminal.PrintString(args[0] + " was not a valid 32 bit integer.\n");
}
}
catch (Exception ex)
{
m_Terminal.PrintString(ex.Message + '\n');
}
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
// we expect three arguments. if not, throw an ArgumentException
if (args.Length != 3)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 3, received " + args.Length + '.');
}
int rdReg = RegisterMap.GetNumericRegisterValue(args[0]);
int rs1Reg = RegisterMap.GetNumericRegisterValue(args[1]);
uint immVal = 0;
bool isValidImmediate = IntExtensions.TryParseEx(args[2], out immVal);
// this is okay, as we expect an unsigned value.
isValidImmediate = isValidImmediate && ((immVal & 0xFFFFF000) == 0);
var instructionList = new List <int>();
if (isValidImmediate)
{
int instruction = GenerateUnexpandedInstruction(immVal, rs1Reg, rdReg);
instructionList.Add(instruction);
}
else
{
// otherwise, emit three instructions. load the upper 20 bits of the immediate into the destination register,
// bitwise-or it with the remaining 12 bits, and then use sltu (the s-type).
var luiProc = new LuiProcessor();
instructionList.AddRange(luiProc.GenerateCodeForInstruction(address, new string[] { args[0], (immVal >> 12).ToString() }));
uint orImmVal = immVal & 0xFFF;
var oriProc = new OriProcessor();
instructionList.AddRange(oriProc.GenerateCodeForInstruction(address, new string[] { args[0], orImmVal.ToString() }));
var sltuProc = new SltuProcessor();
instructionList.AddRange(sltuProc.GenerateCodeForInstruction(address, new string[] { args[0], args[1], args[0] }));
}
return(instructionList);
}
public void Execute(string[] args)
{
try
{
string regName = args[0];
if (IntExtensions.TryParseEx(args[1], out int iValue))
{
if (RegisterMap.IsNamedIntegerRegister(regName))
{
int regIdx = RegisterMap.GetNumericRegisterValue(regName);
m_Registers.UserIntRegisters[regIdx].Value = iValue;
m_Terminal.PrintString("\t" + regName + " = " + iValue + '\n');
}
else
{
throw new ParseException(regName + " was not a valid register name.");
}
}
else if (FloatExtensions.TryParseEx(args[1], out float fValue))
{
if (RegisterMap.IsNamedFloatingPointRegister(regName))
{
int regIdx = RegisterMap.GetNumericFloatingPointRegisterValue(regName);
m_Registers.UserFloatingPointRegisters[regIdx].Value = fValue;
m_Terminal.PrintString("\t" + regName + " = " + fValue + '\n');
}
else
{
throw new ParseException(regName + " was not a valid register name.");
}
}
else
{
throw new ParseException(args[1] + " was not a valid 32-bit value");
}
}
catch (Exception ex)
{
m_Terminal.PrintString(ex.Message + '\n');
}
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
// we expect three arguments. if not, throw an ArgumentException
if (args.Length != 3)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 3, received " + args.Length + '.');
}
int rdReg = RegisterMap.GetNumericRegisterValue(args[0]);
int rs1Reg = RegisterMap.GetNumericRegisterValue(args[1]);
int immVal = 0;
bool isValidImmediate = IntExtensions.TryParseEx(args[2], out immVal);
if (isValidImmediate)
{
var instructionList = new List <int>();
// if the immediate is greater than 12 bits, use
// an auipc instruction.
if (!IsValidTwelveBitSignedImmediate(immVal))
{
var auipcHelper = new AuipcProcessor();
IEnumerable <int> auipcInstructions =
auipcHelper.GenerateCodeForInstruction(address, new string[] { args[1], (immVal >> 12).ToString() });
instructionList.AddRange(auipcInstructions);
}
int instruction = 0;
instruction |= (immVal << 20);
instruction |= (rs1Reg << 15);
instruction |= (rdReg << 7);
instruction |= 0x67;
instructionList.Add(instruction);
return(instructionList);
}
else
{
throw new ArgumentException("Immediate was not a valid 32-bit integer.");
}
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
// we expect three arguments. if not, throw an ArgumentException
if (args.Length != 3)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 3, received " + args.Length + '.');
}
int rdReg = RegisterMap.GetNumericRegisterValue(args[0]);
int rs1Reg = RegisterMap.GetNumericRegisterValue(args[1]);
int immVal = 0;
bool isValidImmediate = IntExtensions.TryParseEx(args[2], out immVal);
if (isValidImmediate)
{
var instructionList = default(List <int>);
// see if this is a valid 12 bit immediate.
// if it is greater, treat this as a pseudo instruction and generate
// underlying code to support it. otherwise, use the real andi instruction.
if (!IsValidTwelveBitSignedImmediate(immVal))
{
instructionList = GenerateExpandedInstruction(address, immVal, args);
}
else
{
instructionList = new List <int>();
int instruction = GenerateUnexpandedInstruction(immVal, rs1Reg, rdReg);
instructionList.Add(instruction);
}
return(instructionList);
}
else
{
throw new ArgumentException(args[2] + " is not a valid immediate value.");
}
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
// we expect three arguments. if not, throw an ArgumentException
if (args.Length != 3)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 3, received " + args.Length + '.');
}
int rdReg = RegisterMap.GetNumericRegisterValue(args[0]);
int rs1Reg = RegisterMap.GetNumericRegisterValue(args[1]);
int immVal = 0;
bool isValidImmediate = IntExtensions.TryParseEx(args[2], out immVal);
if (isValidImmediate)
{
var instructionList = default(List <int>);
// if the mask is greater not zero, this would indicate that there are bits beyond the 11th bit offset.
// help the user by generating equivalent s-type instructions
if (!IsValidTwelveBitSignedImmediate(immVal))
{
instructionList = GenerateExpandedInstruction(address, immVal, args);
}
else
{
instructionList = new List <int>();
int instruction = GenerateUnexpandedInstruction(immVal, rs1Reg, rdReg);
instructionList.Add(instruction);
}
return(instructionList);
}
else
{
throw new ArgumentException(args[2] + " is not a valid immediate value.");
}
}
/// <summary>
/// Adds a byte element to the object file.
/// </summary>
/// <param name="objFile">The object file to add to.</param>
/// <param name="fullText">The full text of the assembly line.</param>
/// <param name="declarationToken">The token specifying the declaration of the size parameter.</param>
private void AddByteElementToFile(BasicObjectFile objFile, string fullText, string declarationToken)
{
// find the token directly after the size directive
int substrBeginIdx = fullText.IndexOf(declarationToken) + declarationToken.Length;
string arguments = fullText.Substring(substrBeginIdx);
// split by commas.
string[] tokenizedArgs = arguments.Split(new[] { ',' });
tokenizedArgs = tokenizedArgs.Apply((str) => str.Trim()).ToArray();
// iterate through each element in the "array".
foreach (string token in tokenizedArgs)
{
// if it contains a ':' character, then this itself is an array of the initialized token.
if (token.Contains(':'))
{
string[] subtokens = token.Split(new[] { ':' }).Apply((str) => str.Trim()).ToArray();
if (subtokens.Length == 2)
{
int numElems = int.Parse(subtokens[1]);
// first, try to get the value as a byte.
if (!IntExtensions.TryParseEx(subtokens[0], out byte byteElem))
{
// if we fail, then try parsing the character as a literal.
if (!StringUtils.TryParseCharacterLiteralAsByte(subtokens[0], out byteElem))
{
// as a fallback, see if we can resolve the string as a symbol.
Symbol sym = m_SymTbl.GetSymbol(subtokens[0]);
byteElem = (byte)sym.Address;
}
}
for (int i = 0; i < numElems; ++i)
{
objFile.AddDataElement(byteElem);
}
}
else
{
throw new ArgumentException("Expected size parameter after ':' token.");
}
}
else
{
// otherwise, it should just be an element (without any size modifiers).
// just parse it and add it.
// first, try to get the value as a byte.
if (!IntExtensions.TryParseEx(token, out byte byteElem))
{
// if we fail, then try parsing the character as a literal.
if (!StringUtils.TryParseCharacterLiteralAsByte(token, out byteElem))
{
// as a fallback, see if we can resolve the string as a symbol.
Symbol sym = m_SymTbl.GetSymbol(token);
byteElem = (byte)sym.Address;
}
}
objFile.AddDataElement(byteElem);
}
}
}
/// <summary>
/// Parses an instruction and generates the binary code for it.
/// </summary>
/// <param name="address">The address of the instruction being parsed in the .text segment.</param>
/// <param name="args">An array containing the arguments of the instruction.</param>
/// <returns>One or more 32-bit integers representing this instruction. If this interface is implemented
/// for a pseudo-instruction, this may return more than one instruction value.</returns>
public override IEnumerable <int> GenerateCodeForInstruction(int address, string[] args)
{
// we expect two arguments. if not, throw an ArgumentException
if (args.Length != 2)
{
throw new ArgumentException("Invalid number of arguments provided. Expected 2, received " + args.Length + '.');
}
int rdReg = RegisterMap.GetNumericRegisterValue(args[0]);
#if DEBUG
int targetAddress = 0;
if (SymbolTable.ContainsSymbol(args[1]))
{
Symbol symbolLabel = SymbolTable.GetSymbol(args[1]);
targetAddress = symbolLabel.Address;
}
else if (!IntExtensions.TryParseEx(args[1], out targetAddress))
{
throw new ArgumentException(args[1] + " was not a symbol name or valid 32-bit address.");
}
var instructionList = new List <int>();
// the offset is doubled implicitly by the processor, so halve it here.
int offset = (targetAddress - address);
// this should rarely happen, but if the halved immediate exceeds the 21 bit boundary,
// error out and notify the user.
if ((Math.Abs(offset / 2) & 0xFFE00000) != 0)
{
throw new ArgumentException("jal - the offset between the address of \"0x" + targetAddress.ToString("X") + "\"" +
" and this instruction address (0x" +
address.ToString("X") + ") exceeds the 21 bit immediate limit. Use jalr instead.");
}
#else
Symbol symbolLabel = SymbolTable.GetSymbol(args[1]);
var instructionList = new List <int>();
// the offset is doubled implicitly by the processor, so halve it here.
int offset = (symbolLabel.Address - address);
// this should rarely happen, but if the halved immediate exceeds the 21 bit boundary,
// error out and notify the user.
if ((Math.Abs(offset / 2) & 0xFFE00000) != 0)
{
throw new ArgumentException("jal - the offset between the address of \"" + symbolLabel.LabelName + "\"" +
" (0x" + symbolLabel.Address.ToString("X") + " and this instruction address (0x" +
address.ToString("X") + ") exceeds the 21 bit immediate limit. Use jalr instead.");
}
#endif
int instruction = 0;
// get the twentieth bit offset (21st bit) of the offset value
// and shift it to the 31st bit offset.
instruction |= ((offset & 0x100000) << 11);
// get the 10-1 bit offsets and shift that range to the 30-20 offset.
instruction |= ((offset & 0x7FE) << 20);
// get the 11th bit offset and shift it to offset 20.
instruction |= ((offset & 0x800) << 9);
// get the 19-12 bit offsets and shift them to position 18-11
instruction |= ((offset & 0xFF000));
// shift the rd register value up to offset 11-7
instruction |= (rdReg << 7);
instruction |= 0x6F;
instructionList.Add(instruction);
return(instructionList);
}