//clone an instrument
private void InstrumentContextCloneBtn_ItemClick(object sender, RoutedEventArgs routedEventArgs)
{
var inst = (Instrument)InstrumentsGrid.SelectedItem;
var window = new AddInstrumentManuallyWindow(inst);
window.ShowDialog();
if (window.InstrumentAdded)
{
Instruments.Add(window.TheInstrument);
}
window.Close();
}
//show the interactive brokers add instrument window
private void AddInstrumentIBBtn_ItemClick(object sender, RoutedEventArgs routedEventArgs)
{
var window = new AddInstrumentInteractiveBrokersWindow();
if (window.ViewModel != null && window.ViewModel.AddedInstruments != null)
{
foreach (Instrument i in window.ViewModel.AddedInstruments)
{
Instruments.Add(i);
}
window.Close();
}
}
//show the Quandl add instrument window
private void AddInstrumentQuandlBtn_OnClick(object sender, RoutedEventArgs e)
{
var window = new AddInstrumentQuandlWindow();
if (window.AddedInstruments != null)
{
foreach (Instrument i in window.AddedInstruments)
{
Instruments.Add(i);
}
window.Close();
}
}
private void AddInstrumentIb()
{
var window = new Windows.AddInstrumentInteractiveBrokersWindow();
if (window.ViewModel?.AddedInstruments != null)
{
foreach (Instrument i in window.ViewModel.AddedInstruments)
{
Instruments.Add(i);
}
window.Close();
}
}
//show the FRED add instrument window
private void AddInstrumentFredBtn_OnClick(object sender, RoutedEventArgs e)
{
using (var context = new MyDBContext())
{
var window = new AddInstrumentFredWindow(context);
if (window.AddedInstruments != null)
{
foreach (Instrument i in window.AddedInstruments)
{
Instruments.Add(i);
}
window.Close();
}
}
}
public void AddInstance(Instrument instrument, InstrumentStrategy strategy)
{
strategy.Instrument = instrument;
strategy.Instruments.Add(instrument);
strategy.Portfolio.GetOrCreatePosition(instrument);
strategy.raiseEvents = true;
strategy.SetRawDataProvider(this.rawDataProvider);
strategy.SetRawExecutionProvider(this.rawExecutionProvider);
InsertStrategy(strategy);
if (Instruments.GetById(instrument.Id) == null)
{
Instruments.Add(instrument);
}
strategy.Status = StrategyStatus.Running;
strategy.OnStrategyInit();
strategy.OnStrategyStart();
}
private void Search(int page = 1)
{
Instruments.Clear();
int count = 0;
var foundInstruments = QuandlUtils.FindInstruments(SymbolTextBox.Text, out count, page);
foreach (var i in foundInstruments)
{
i.Datasource = _thisDS;
i.DatasourceID = _thisDS.ID;
i.Multiplier = 1;
Instruments.Add(i);
}
StatusLabel.Content = count + " contracts found";
CurrentPageTextBox.Text = page.ToString();
}
async Task ExecuteLoadItemsCommand()
{
IsBusy = true;
try
{
Instruments.Clear();
var instruments = await InstrumentDataStore.GetItemsAsync(true);
foreach (var instrument in instruments)
{
Instruments.Add(instrument);
}
}
catch (Exception ex)
{
Debug.WriteLine(ex);
}
finally
{
IsBusy = false;
}
}
public void Add(Strategy strategy)
{
this.list_1.Add(strategy);
strategy.Portfolio.Parent = Portfolio;
foreach (Instrument current in strategy.Instruments)
{
List <Strategy> list;
if (this.idArray_3[current.Id] == null)
{
list = new List <Strategy>();
this.idArray_3[current.Id] = list;
}
else
{
list = this.idArray_3[current.Id];
}
list.Add(strategy);
if (!Instruments.Contains(current))
{
Instruments.Add(current);
}
}
}
public DecelerationHardware()
{
// YAG laser
yag = new MiniliteLaser();
// add the boards
Boards.Add("daq", "/dev2");
Boards.Add("pg", "/dev1");
Boards.Add("usbDev", "/dev3");
Boards.Add("PXI6", "/PXI1Slot6");
Boards.Add("PXI4", "/PXI1Slot4");
string pgBoard = (string)Boards["pg"];
string usbBoard = (string)Boards["usbDev"];
string daqBoard = (string)Boards["daq"];
string PXIBoard = (string)Boards["PXI6"];
string TCLBoard = (string)Boards["PXI4"];
Instruments.Add("synth", new HP8673BSynth("GPIB0::19::INSTR"));
Instruments.Add("counter", new HP5350BCounter("GPIB0::14::INSTR"));
//VCO lock
AddAnalogOutputChannel("VCO_Out", PXIBoard + "/ao12", 0.0, 10.0);
// add things to the info
Info.Add("PGClockLine", Boards["pg"] + "/PFI2");
Info.Add("PatternGeneratorBoard", pgBoard);
Info.Add("PGType", "dedicated");
//TCL Lockable lasers
Info.Add("TCLLockableLasers", new string[] { "laser", "laser2" });
Info.Add("TCLPhotodiodes", new string[] { "cavity", "master", "p1", "p2" }); // THE FIRST TWO MUST BE CAVITY AND MASTER PHOTODIODE!!!!
Info.Add("TCL_Slave_Voltage_Limit_Upper", 10.0); //volts: Laser control
Info.Add("TCL_Slave_Voltage_Limit_Lower", -10.0); //volts: Laser control
Info.Add("TCL_Default_Gain", 0.01);
Info.Add("TCL_Default_VoltageToLaser", 0.0);
Info.Add("TCL_MAX_INPUT_VOLTAGE", 10.0);
// Some matching up for TCL
Info.Add("laser", "p1");
Info.Add("laser2", "p2");
// the analog triggers
Info.Add("analogTrigger0", (string)Boards["daq"] + "/PFI0"); // pin 10
Info.Add("analogTrigger1", (string)Boards["daq"] + "/PFI1"); // pin 11
Info.Add("TCLTrigger", (string)Boards["PXI4"] + "/PFI0");
//Info.Add("analogTrigger2", (string)Boards["usbDev"] + "/PFI0"); //Pin 29
Info.Add("analogTrigger3", (string)Boards["daq"] + "/PFI6"); //Pin 5 - breakout 31
//distance information
Info.Add("sourceToDetect", 0.81); //in m
Info.Add("sourceToSoftwareDecelerator", 0.12); //in m
//information about the molecule
Info.Add("molecule", "caf");
Info.Add("moleculeMass", 58.961); // this is 40CaF in atomic mass units
Info.Add("moleculeRotationalConstant", 1.02675E10); //in Hz
Info.Add("moleculeDipoleMoment", 15400.0); //in Hz/(V/m)
//information about the decelerator
//These settings for WF
Info.Add("deceleratorStructure", DecelerationConfig.DecelerationExperiment.SwitchStructure.V_H); //Vertical first
Info.Add("deceleratorLensSpacing", 0.006);
Info.Add("deceleratorFieldMap", "RodLayout3_EonAxis.dat");
Info.Add("mapPoints", 121);
Info.Add("mapStartPoint", 0.0);
Info.Add("mapResolution", 0.0001);
// These settings for AG
// Info.Add("deceleratorStructure", DecelerationConfig.DecelerationExperiment.SwitchStructure.H_V); //Horizontal first
// Info.Add("deceleratorLensSpacing", 0.024);
// Info.Add("deceleratorFieldMap", "Section1v1_onAxisFieldTemplate.dat");
// Info.Add("mapPoints", 481);
// Info.Add("mapStartPoint", 0.0);
// Info.Add("mapResolution", 0.0001);
//Here are constants for 174YbF for future reference
//Info.Add("molecule", "ybf");
//Info.Add("moleculeMass", 192.937); // this is 174YbF in atomic mass units
//Info.Add("moleculeRotationalConstant", 7.2338E9); //in Hz
//Info.Add("moleculeDipoleMoment", 19700.0); //in Hz/(V/m)
// map the digital channels
AddDigitalOutputChannel("valve", pgBoard, 0, 6);
AddDigitalOutputChannel("flash", pgBoard, 0, 0); //Changed from pg board P.0.5 because that appears to have died mysteriously (line dead in ribbon cable?) TEW 06/04/09
AddDigitalOutputChannel("q", pgBoard, 0, 2);
AddDigitalOutputChannel("detector", pgBoard, 3, 7);
AddDigitalOutputChannel("detectorprime", pgBoard, 3, 6);
AddDigitalOutputChannel("aom", pgBoard, 2, 1); //Same channel as "ttl2" as used by the AomLevelControlPlugin. Now commented out.
AddDigitalOutputChannel("decelhplus", pgBoard, 1, 0); //Pin 16
AddDigitalOutputChannel("decelhminus", pgBoard, 1, 1); //Pin 17
AddDigitalOutputChannel("decelvplus", pgBoard, 1, 2); //Pin 51
AddDigitalOutputChannel("decelvminus", pgBoard, 1, 3); //Pin 52
AddDigitalOutputChannel("cavityTriggerOut", usbBoard, 0, 1); //Pin 18
//AddDigitalOutputChannel("ttl1", pgBoard, 2, 2); //Pin 58 Used to be used with AomLevelControlPlugin.
//AddDigitalOutputChannel("ttl2", pgBoard, 2, 1); //Pin 57
// AddDigitalOutputChannel("ttlSwitch", pgBoard, 1, 3); // This is the output that the pg
// will switch if it's switch scanning.
// map the analog channels
AddAnalogInputChannel("pmt", daqBoard + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("pmt2", daqBoard + "/ai8", AITerminalConfiguration.Rse);
AddAnalogInputChannel("longcavity", daqBoard + "/ai3", AITerminalConfiguration.Rse);
AddAnalogInputChannel("refcavity", daqBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("lockcavity", daqBoard + "/ai2", AITerminalConfiguration.Rse);
AddAnalogInputChannel("master", TCLBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("p1", TCLBoard + "/ai3", AITerminalConfiguration.Rse);
AddAnalogInputChannel("cavity", TCLBoard + "/ai2", AITerminalConfiguration.Rse);
AddAnalogInputChannel("p2", TCLBoard + "/ai0", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("laser", PXIBoard + "/ao13");
//AddAnalogOutputChannel("cavity", daqBoard + "/ao0");
// AddAnalogOutputChannel("cavity", PXIBoard + "/ao5");
AddAnalogOutputChannel("laser2", PXIBoard + "/ao25");
AddAnalogOutputChannel("laser3", PXIBoard + "/ao31");
AddAnalogOutputChannel("rampfb", PXIBoard + "/ao19");
AddAnalogOutputChannel("highvoltage", daqBoard + "/ao1");// hardwareController has "highvoltage" hardwired into it and so needs to see this ao, otherwise it crashes. Need to fix this.
// map the counter channels
AddCounterChannel("pmt", daqBoard + "/ctr0");
AddCounterChannel("sample clock", daqBoard + "/ctr1");
}
private void StartLoad()
{
try
{
IsConnected = _bitmexApiSocketService.Connect();
}
catch (Exception e)
{
MessageBox.Show(e.Message);
}
if (IsConnected)
{
_bitmexApiSocketService.Subscribe(BitmetSocketSubscriptions.CreateInstrumentSubsription(
message =>
{
foreach (var instrumentDto in message.Data)
{
lock (_syncObj)
{
var existing = Instruments.FirstOrDefault(a => a.Symbol == instrumentDto.Symbol);
if (existing != null && message.Action == BitmexActions.Update)
{
Mapper.Map <InstrumentDto, InstrumentModel>(instrumentDto, existing);
}
else if (message.Action != BitmexActions.Partial && message.Action != BitmexActions.Delete)
{
Instruments.Add(Mapper.Map <InstrumentDto, InstrumentModel>(instrumentDto));
}
}
}
}));
_bitmexApiSocketService.Subscribe(BitmetSocketSubscriptions.CreateOrderSubsription(
message =>
{
foreach (var order in message.Data)
{
lock (_syncObjOrders)
{
var existing = OrderUpdates.FirstOrDefault(a => a.OrderId == order.OrderId);
if (existing != null && message.Action == BitmexActions.Update)
{
Mapper.Map <OrderDto, OrderUpdateModel>(order, existing);
}
else if (message.Action != BitmexActions.Partial && message.Action != BitmexActions.Delete)
{
OrderUpdates.Add(Mapper.Map <OrderDto, OrderUpdateModel>(order));
}
}
OnPropertyChanged(nameof(OrderUpdates));
}
}));
_bitmexApiSocketService.Subscribe(BitmetSocketSubscriptions.CreateOrderBook10Subsription(
message =>
{
foreach (var dto in message.Data)
{
if (dto.Symbol != "XBTUSD")
{
continue;
}
lock (_syncObjOrderBook10)
{
OrderBook10 = dto.Asks.Select(a =>
new OrderBookModel {
Direction = "Sell", Price = a[0], Size = a[1]
})
.Union(dto.Asks.Select(a =>
new OrderBookModel {
Direction = "Buy", Price = a[0], Size = a[1]
})).ToList();
}
OnPropertyChanged(nameof(OrderBook10));
}
}));
_bitmexApiSocketService.Subscribe(BitmetSocketSubscriptions.CreateOrderBookL2Subsription(
message =>
{
foreach (var dto in message.Data)
{
if (dto.Symbol != "XBTUSD")
{
continue;
}
lock (_syncObjOrderBookL2)
{
if (message.Action == BitmexActions.Insert || message.Action == BitmexActions.Partial)
{
OrderBookL2.Add(Mapper.Map <OrderBookDto, OrderBookModel>(dto));
}
if (message.Action == BitmexActions.Delete)
{
var existing = OrderBookL2.FirstOrDefault(a => a.Id == dto.Id);
if (existing != null)
{
OrderBookL2.Remove(existing);
}
}
if (message.Action == BitmexActions.Update)
{
var existing = OrderBookL2.FirstOrDefault(a => a.Id == dto.Id);
if (existing == null)
{
OrderBookL2.Add(Mapper.Map <OrderBookDto, OrderBookModel>(dto));
}
else
{
Mapper.Map <OrderBookDto, OrderBookModel>(dto, existing);
}
}
}
OnPropertyChanged(nameof(OrderBook10));
}
}));
}
}
public SympatheticHardware()
{
// YAG laser
yag = new QuantaRayLaser();
// add the boards
Boards.Add("daq", "/dev2");
Boards.Add("pg", "/dev1");
Boards.Add("usbDAQ2", "/dev3");
Boards.Add("TCLAIBoard", "/dev4");
//Boards.Add("usbDAQ1", "/dev4");
string pgBoard = (string)Boards["pg"];
string daqBoard = (string)Boards["daq"];
string usbDAQ1 = (string)Boards["usbDAQ1"];
string usbDAQ2 = (string)Boards["usbDAQ2"];
string TCLBoard = (string)Boards["TCLAIBoard"];
// add things to the info
Info.Add("PGClockLine", Boards["pg"] + "/PFI2");
Info.Add("PatternGeneratorBoard", pgBoard);
Info.Add("PGType", "dedicated");
// the analog triggers
Info.Add("analogTrigger0", (string)Boards["daq"] + "/PFI0"); //DAQ Pin 11
Info.Add("analogTrigger1", (string)Boards["daq"] + "/PFI1"); //DAQ Pin 10
//Info.Add("analogTrigger2", (string)Boards["daq"] + "/PFI5"); //DAQ Pin 6
//Info.Add("analogTrigger2", (string)Boards["usbDAQ2"] + "/PFI0");
Info.Add("analogTrigger2", TCLBoard + "/PFI0");
//Info.Add("analogTrigger2", (string)Boards["daq"] + "/PFI1"); //DAQ Pin 10
//distance information
Info.Add("sourceToDetect", 0.787);
Info.Add("sourceToSoftwareDecelerator", 0.123);
//information about the molecule
Info.Add("moleculeMass", 8.024); //this is 7LiH in amu
Info.Add("moleculeRotationalConstant", 2.22545E11); //in Hz
Info.Add("moleculeDipoleMoment", 29600.0); //in Hz/(V/m)
//information about the decelerator
Info.Add("deceleratorStructure", DecelerationConfig.DecelerationExperiment.SwitchStructure.H_V); //Horizontal first
Info.Add("deceleratorLensSpacing", 0.006);
Info.Add("deceleratorFieldMap", "RodLayout3_EonAxis.dat");
Info.Add("mapPoints", 121);
Info.Add("mapStartPoint", 0.0);
Info.Add("mapResolution", 0.0001);
//TCL Lockable lasers
Info.Add("TCLLockableLasers", new string[] { "laser" });
Info.Add("TCLPhotodiodes", new string[] { "cavity", "master", "p1" }); // THE FIRST TWO MUST BE CAVITY AND MASTER PHOTODIODE!!!!
Info.Add("TCL_Slave_Voltage_Limit_Upper", 10.0); //volts: Laser control
Info.Add("TCL_Slave_Voltage_Limit_Lower", -10.0); //volts: Laser control
Info.Add("TCL_Default_Gain", 0.5);
Info.Add("TCL_Default_VoltageToLaser", 0.0);
Info.Add("TCL_MAX_INPUT_VOLTAGE", 10.0);
// map the GPIB instruments
Instruments.Add("microwave", new EIP578Synth("GPIB0::19::INSTR"));
Instruments.Add("agilent", new Agilent33250Synth("GPIB0::10::INSTR"));
Instruments.Add("gigatronics", new Gigatronics7100Synth("GPIB0::6::INSTR"));
// map the digital channels
// these channels are to be part of the "PatternList" and shoud all be on the low half of the board
AddDigitalOutputChannel("valve", pgBoard, 0, 0); //Pin 10
AddDigitalOutputChannel("flash", pgBoard, 0, 1); //Pin 44
AddDigitalOutputChannel("valve2", pgBoard, 0, 1);
AddDigitalOutputChannel("discharge", pgBoard, 0, 3);
AddDigitalOutputChannel("q", pgBoard, 0, 2); //Pin 45
AddDigitalOutputChannel("detector", pgBoard, 0, 7); //Pin 15
AddDigitalOutputChannel("detectorprime", pgBoard, 1, 7); //Pin 22
// AddDigitalOutputChannel("fig", pgBoard, 3, 1); //Pin 63
AddDigitalOutputChannel("aom", pgBoard, 0, 4); //Pin 13
AddDigitalOutputChannel("flash2", pgBoard, 0, 5); //Pin 47
AddDigitalOutputChannel("q2", pgBoard, 0, 6); //Pin 48
AddDigitalOutputChannel("cavityTriggerOut", usbDAQ2, 0, 1); //Pin 17
// the following are the decelerator channels for the burst
AddDigitalOutputChannel("decelhplus", pgBoard, 1, 0); //Pin 16
AddDigitalOutputChannel("decelhminus", pgBoard, 1, 1); //Pin 17
AddDigitalOutputChannel("decelvplus", pgBoard, 1, 2); //Pin 51
AddDigitalOutputChannel("decelvminus", pgBoard, 1, 3); //Pin 52
AddDigitalOutputChannel("SynthTrigger", pgBoard, 0, 3); //Pin 48
// these channels are to be switched "manually" and should all be on the high half of the board
// the following set of switches are used to enable or disable the burst
AddDigitalOutputChannel("hplusBurstEnable", pgBoard, 2, 0);
AddDigitalOutputChannel("hminusBurstEnable", pgBoard, 3, 4);
AddDigitalOutputChannel("vplusBurstEnable", pgBoard, 2, 2);
AddDigitalOutputChannel("vminusBurstEnable", pgBoard, 2, 3);
// the following set of switches are used for dc on or off
AddDigitalOutputChannel("hplusdc", pgBoard, 2, 4);
AddDigitalOutputChannel("hminusdc", pgBoard, 2, 5);
AddDigitalOutputChannel("vplusdc", pgBoard, 2, 6);
AddDigitalOutputChannel("vminusdc", pgBoard, 3, 3);
// map the analog input channels
AddAnalogInputChannel("pmt", daqBoard + "/ai0", AITerminalConfiguration.Rse); //Pin 68
//AddAnalogInputChannel("p1", daqBoard + "/ai7", AITerminalConfiguration.Rse);//Pin 57
//AddAnalogInputChannel("p2", daqBoard + "/ai14", AITerminalConfiguration.Rse);//Pin 58
//AddAnalogInputChannel("cavityVoltageRead", daqBoard + "/ai12", AITerminalConfiguration.Rse); //Pin 61
//AddAnalogInputChannel("p1", usbDAQ2 + "/ai0", AITerminalConfiguration.Rse);//Pin 2
//AddAnalogInputChannel("p2", usbDAQ2 + "/ai1", AITerminalConfiguration.Rse);//Pin 5
//AddAnalogInputChannel("cavityVoltageRead", usbDAQ2 + "/ai2", AITerminalConfiguration.Rse); //Pin 8
AddAnalogInputChannel("p1", TCLBoard + "/ai0", AITerminalConfiguration.Rse); //Pin 2
AddAnalogInputChannel("p2", TCLBoard + "/ai1", AITerminalConfiguration.Rse); //Pin 5
AddAnalogInputChannel("cavityVoltageRead", TCLBoard + "/ai2", AITerminalConfiguration.Rse); //Pin 8
AddAnalogInputChannel("lockcavity", daqBoard + "/ai1", AITerminalConfiguration.Rse); //Pin 33
AddAnalogInputChannel("probepower", daqBoard + "/ai9", AITerminalConfiguration.Rse); //Pin 66
//AddAnalogInputChannel("refcavity", daqBoard + "/ai2", AITerminalConfiguration.Rse); //Pin 65
AddAnalogInputChannel("pressureP1", daqBoard + "/ai2", AITerminalConfiguration.Rse); //Pin 65
AddAnalogInputChannel("fig", daqBoard + "/ai5", AITerminalConfiguration.Rse); //Pin 60
AddAnalogInputChannel("atomSourcePressure1", usbDAQ1 + "/ai0", AITerminalConfiguration.Differential); //ai0+ is pin 2, ai0- is pin 3
AddAnalogInputChannel("atomSourcePressure2", usbDAQ1 + "/ai1", AITerminalConfiguration.Differential); //ai1+ is pin 5, ai1- is pin 6
//map the analog output channels
AddAnalogOutputChannel("laser", daqBoard + "/ao0"); // Pin 22
// AddAnalogOutputChannel("dyelaser", daqBoard + "/ao1",-5,5); // Pin 21
AddAnalogOutputChannel("highvoltage", daqBoard + "/ao1"); // Note - this is just here because a channel called "highvoltage" has been hard-wired into DecelerationHardwareControl - this needs to be rectified
AddAnalogOutputChannel("cavity", daqBoard + "/ao1"); // Pin 21
//AddAnalogOutputChannel("cavity", usbDAQ2 + "/ao0"); // Pin 14
// map the counter channels
AddCounterChannel("pmt", daqBoard + "/ctr0"); //Source is pin 37, gate is pin 3, out is pin 2
AddCounterChannel("sample clock", daqBoard + "/ctr1"); //Source is pin 42, gate is pin 41, out is pin 40
}
public EDMHardware()
{
// add the boards
Boards.Add("daq", "/dev1");
Boards.Add("pg", "/dev2");
Boards.Add("counter", "/dev3");
Boards.Add("usbDAQ1", "/dev4");
Boards.Add("analogIn", "/dev5");
Boards.Add("usbDAQ2", "/dev6");
Boards.Add("usbDAQ3", "/dev7");
Boards.Add("usbDAQ4", "/dev9");
string pgBoard = (string)Boards["pg"];
string daqBoard = (string)Boards["daq"];
string counterBoard = (string)Boards["counter"];
string usbDAQ1 = (string)Boards["usbDAQ1"];
string analogIn = (string)Boards["analogIn"];
string usbDAQ2 = (string)Boards["usbDAQ2"];
string usbDAQ3 = (string)Boards["usbDAQ3"];
string usbDAQ4 = (string)Boards["usbDAQ4"];
// add things to the info
// the analog triggers
Info.Add("analogTrigger0", (string)Boards["analogIn"] + "/PFI0");
Info.Add("analogTrigger1", (string)Boards["analogIn"] + "/PFI1");
Info.Add("sourceToDetect", 1.3);
Info.Add("moleculeMass", 193.0);
Info.Add("phaseLockControlMethod", "synth");
Info.Add("PGClockLine", Boards["pg"] + "/PFI2");
Info.Add("PatternGeneratorBoard", pgBoard);
Info.Add("PGType", "dedicated");
// YAG laser
yag = new BrilliantLaser("ASRL1::INSTR");
// add the GPIB instruments
Instruments.Add("green", new HP8657ASynth("GPIB0::7::INSTR"));
Instruments.Add("red", new HP3325BSynth("GPIB0::12::INSTR"));
Instruments.Add("4861", new ICS4861A("GPIB0::4::INSTR"));
Instruments.Add("bCurrentMeter", new HP34401A("GPIB0::22::INSTR"));
Instruments.Add("rfCounter", new Agilent53131A("GPIB0::3::INSTR"));
Instruments.Add("rfPower", new HP438A("GPIB0::13::INSTR"));
// map the digital channels
// these channels are generally switched by the pattern generator
// they're all in the lower half of the pg
AddDigitalOutputChannel("valve", pgBoard, 0, 0);
AddDigitalOutputChannel("flash", pgBoard, 0, 1);
AddDigitalOutputChannel("q", pgBoard, 0, 2);
AddDigitalOutputChannel("detector", pgBoard, 0, 3);
AddDigitalOutputChannel("detectorprime", pgBoard, 1, 2); // this trigger is for switch scanning
// see ModulatedAnalogShotGatherer.cs
// for details.
AddDigitalOutputChannel("rfSwitch", pgBoard, 0, 4);
AddDigitalOutputChannel("fmSelect", pgBoard, 1, 0); // This line selects which fm voltage is
// sent to the synth.
AddDigitalOutputChannel("attenuatorSelect", pgBoard, 0, 5); // This line selects the attenuator voltage
// sent to the voltage-controlled attenuator.
AddDigitalOutputChannel("piFlip", pgBoard, 1, 1);
AddDigitalOutputChannel("ttlSwitch", pgBoard, 1, 3); // This is the output that the pg
// will switch if it's switch scanning.
AddDigitalOutputChannel("scramblerEnable", pgBoard, 1, 4);
// these channel are usually software switched - they should not be in
// the lower half of the pattern generator
AddDigitalOutputChannel("b", pgBoard, 2, 0);
AddDigitalOutputChannel("notB", pgBoard, 2, 1);
AddDigitalOutputChannel("db", pgBoard, 2, 2);
AddDigitalOutputChannel("notDB", pgBoard, 2, 3);
// AddDigitalOutputChannel("notEOnOff", pgBoard, 2, 4); // this line seems to be broken on our pg board
// AddDigitalOutputChannel("eOnOff", pgBoard, 2, 5); // this and the above are not used now we have analog E control
AddDigitalOutputChannel("targetStepper", pgBoard, 2, 5);
AddDigitalOutputChannel("ePol", pgBoard, 2, 6);
AddDigitalOutputChannel("notEPol", pgBoard, 2, 7);
AddDigitalOutputChannel("eBleed", pgBoard, 3, 0);
AddDigitalOutputChannel("piFlipEnable", pgBoard, 3, 1);
AddDigitalOutputChannel("notPIFlipEnable", pgBoard, 3, 5);
AddDigitalOutputChannel("pumpShutter", pgBoard, 3, 3);
AddDigitalOutputChannel("probeShutter", pgBoard, 3, 4);
AddDigitalOutputChannel("argonShutter", pgBoard, 3, 2);// (3,6) & (3,7) are dead.
// map the analog channels
// These channels are on the daq board. Used mainly for diagnostic purposes.
// On no account should they switch during the edm acquisition pattern.
AddAnalogInputChannel("iodine", daqBoard + "/ai2", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("cavity", daqBoard + "/ai3", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("probePD", daqBoard + "/ai4", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("pumpPD", daqBoard + "/ai5", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("northLeakage", daqBoard + "/ai6", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("southLeakage", daqBoard + "/ai7", AITerminalConfiguration.Nrse);
// Used ai10,11 & 12 over 6,7 & 8 for miniFluxgates, because ai8, 9 have an isolated ground.
AddAnalogInputChannel("miniFlux1", daqBoard + "/ai10", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("miniFlux2", daqBoard + "/ai11", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("miniFlux3", daqBoard + "/ai12", AITerminalConfiguration.Nrse);
// high quality analog inputs (will be) on the S-series analog in board
AddAnalogInputChannel("top", analogIn + "/ai0", AITerminalConfiguration.Differential);
AddAnalogInputChannel("norm", analogIn + "/ai1", AITerminalConfiguration.Differential);
AddAnalogInputChannel("magnetometer", analogIn + "/ai2", AITerminalConfiguration.Differential);
AddAnalogInputChannel("gnd", analogIn + "/ai3", AITerminalConfiguration.Differential);
AddAnalogInputChannel("battery", analogIn + "/ai4", AITerminalConfiguration.Differential);
AddAnalogInputChannel("piMonitor", analogIn + "/ai5", AITerminalConfiguration.Differential);
AddAnalogOutputChannel("phaseScramblerVoltage", daqBoard + "/ao0");
AddAnalogOutputChannel("b", daqBoard + "/ao1");
// rf rack control
//AddAnalogInputChannel("rfPower", usbDAQ1 + "/ai0", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("rf1Attenuator", usbDAQ1 + "/ao0", 0, 5);
AddAnalogOutputChannel("rf2Attenuator", usbDAQ1 + "/ao1", 0, 5);
AddAnalogOutputChannel("rf1FM", usbDAQ2 + "/ao0", 0, 5);
AddAnalogOutputChannel("rf2FM", usbDAQ2 + "/ao1", 0, 5);
// E field control and monitoring
AddAnalogInputChannel("cPlusMonitor", usbDAQ3 + "/ai1", AITerminalConfiguration.Differential);
AddAnalogInputChannel("cMinusMonitor", usbDAQ3 + "/ai2", AITerminalConfiguration.Differential);
AddAnalogOutputChannel("cPlus", usbDAQ3 + "/ao0", -5, 0);
AddAnalogOutputChannel("cMinus", usbDAQ3 + "/ao1", 0, 5);
// B field control
AddAnalogOutputChannel("steppingBBias", usbDAQ4 + "/ao0", 0, 5);
// FL control
AddAnalogOutputChannel("flPZT", usbDAQ4 + "/ao1", 0, 5);
// map the counter channels
AddCounterChannel("phaseLockOscillator", counterBoard + "/ctr7");
AddCounterChannel("phaseLockReference", counterBoard + "/pfi10");
//AddCounterChannel("northLeakage", counterBoard +"/ctr0");
//AddCounterChannel("southLeakage", counterBoard +"/ctr1");
}
public PXIEDMHardwareNormal()
{
// add the boards
Boards.Add("daq", "/PXI1Slot18");
Boards.Add("pg", "/PXI1Slot10");
Boards.Add("counter", "/PXI1Slot3");
Boards.Add("aoBoard", "/PXI1Slot4");
// this drives the rf attenuators
Boards.Add("usbDAQ1", "/Dev2");
Boards.Add("analogIn", "/PXI1Slot2");
Boards.Add("usbDAQ2", "/dev1");
Boards.Add("usbDAQ3", "/dev4");
Boards.Add("usbDAQ4", "/dev3");
Boards.Add("tclBoard", "/PXI1Slot9");
string pgBoard = (string)Boards["pg"];
string daqBoard = (string)Boards["daq"];
string counterBoard = (string)Boards["counter"];
string aoBoard = (string)Boards["aoBoard"];
string usbDAQ1 = (string)Boards["usbDAQ1"];
string analogIn = (string)Boards["analogIn"];
string usbDAQ2 = (string)Boards["usbDAQ2"];
string usbDAQ3 = (string)Boards["usbDAQ3"];
string usbDAQ4 = (string)Boards["usbDAQ4"];
string tclBoard = (string)Boards["tclBoard"];
// add things to the info
// the analog triggers
Info.Add("analogTrigger0", (string)Boards["analogIn"] + "/PFI0");
Info.Add("analogTrigger1", (string)Boards["analogIn"] + "/PFI1");
Info.Add("sourceToDetect", 1.3);
Info.Add("moleculeMass", 193.0);
Info.Add("phaseLockControlMethod", "synth");
Info.Add("PGClockLine", pgBoard + "/PFI4"); //Mapped to PFI2 on 6533 connector
Info.Add("PatternGeneratorBoard", pgBoard);
Info.Add("PGType", "dedicated");
// rf counter switch control seq``
Info.Add("IodineFreqMon", new bool[] { false, false }); // IN 1
Info.Add("pumpAOMFreqMon", new bool[] { false, true }); // IN 2
Info.Add("FLModulationFreqMon", new bool[] { true, false }); // IN 3
Info.Add("PGTrigger", pgBoard + "/PFI5"); //Mapped to PFI7 on 6533 connector
// YAG laser
yag = new BrilliantLaser("ASRL2::INSTR");
// add the GPIB/RS232 instruments
Instruments.Add("green", new HP8657ASynth("GPIB0::7::INSTR"));
Instruments.Add("red", new HP3325BSynth("GPIB0::12::INSTR"));
Instruments.Add("4861", new ICS4861A("GPIB0::4::INSTR"));
Instruments.Add("bCurrentMeter", new HP34401A("GPIB0::22::INSTR"));
Instruments.Add("rfCounter", new Agilent53131A("GPIB0::3::INSTR"));
//Instruments.Add("rfCounter2", new Agilent53131A("GPIB0::5::INSTR"));
Instruments.Add("rfPower", new HP438A("GPIB0::13::INSTR"));
Instruments.Add("BfieldController", new SerialDAQ("ASRL12::INSTR"));
Instruments.Add("rfCounter2", new SerialAgilent53131A("ASRL8::INSTR"));
Instruments.Add("probePolControl", new SerialMotorControllerBCD("ASRL5::INSTR"));
Instruments.Add("pumpPolControl", new SerialMotorControllerBCD("ASRL3::INSTR"));
// map the digital channels
// these channels are generally switched by the pattern generator
// they're all in the lower half of the pg
AddDigitalOutputChannel("valve", pgBoard, 0, 0);
AddDigitalOutputChannel("flash", pgBoard, 0, 1);
AddDigitalOutputChannel("q", pgBoard, 0, 2);
AddDigitalOutputChannel("detector", pgBoard, 0, 3);
AddDigitalOutputChannel("detectorprime", pgBoard, 1, 2); // this trigger is for switch scanning
// see ModulatedAnalogShotGatherer.cs
// for details.
AddDigitalOutputChannel("rfSwitch", pgBoard, 0, 4);
AddDigitalOutputChannel("fmSelect", pgBoard, 1, 0); // This line selects which fm voltage is
// sent to the synth.
AddDigitalOutputChannel("attenuatorSelect", pgBoard, 0, 5); // This line selects the attenuator voltage
// sent to the voltage-controlled attenuator.
AddDigitalOutputChannel("piFlip", pgBoard, 1, 1);
AddDigitalOutputChannel("ttlSwitch", pgBoard, 1, 3); // This is the output that the pg
// will switch if it's switch scanning.
AddDigitalOutputChannel("scramblerEnable", pgBoard, 1, 4);
//RF Counter Control (single pole 4 throw)
//AddDigitalOutputChannel("rfCountSwBit1", pgBoard, 3, 5);
//AddDigitalOutputChannel("rfCountSwBit2", pgBoard, 3, 6);
// new rf amp blanking
AddDigitalOutputChannel("rfAmpBlanking", pgBoard, 1, 5);
// these channel are usually software switched - they should not be in
// the lower half of the pattern generator
AddDigitalOutputChannel("b", pgBoard, 2, 0);
AddDigitalOutputChannel("notB", pgBoard, 2, 1);
AddDigitalOutputChannel("db", pgBoard, 2, 2);
AddDigitalOutputChannel("notDB", pgBoard, 2, 3);
// AddDigitalOutputChannel("notEOnOff", pgBoard, 2, 4); // this line seems to be broken on our pg board
// AddDigitalOutputChannel("eOnOff", pgBoard, 2, 5); // this and the above are not used now we have analog E control
AddDigitalOutputChannel("targetStepper", pgBoard, 2, 5);
AddDigitalOutputChannel("ePol", pgBoard, 2, 6);
AddDigitalOutputChannel("notEPol", pgBoard, 2, 7);
AddDigitalOutputChannel("eBleed", pgBoard, 3, 0);
AddDigitalOutputChannel("piFlipEnable", pgBoard, 3, 1);
AddDigitalOutputChannel("notPIFlipEnable", pgBoard, 3, 5);
AddDigitalOutputChannel("pumpShutter", pgBoard, 3, 3);
AddDigitalOutputChannel("probeShutter", pgBoard, 3, 4);
AddDigitalOutputChannel("argonShutter", pgBoard, 3, 2);
//I2 Lock Control
AddDigitalOutputChannel("I2PropSwitch", pgBoard, 2, 4);
AddDigitalOutputChannel("I2IntSwitch", pgBoard, 3, 6);
AddDigitalOutputChannel("fibreAmpEnable", aoBoard, 0, 0);
// Map the digital input channels
AddDigitalInputChannel("fibreAmpMasterErr", aoBoard, 0, 1);
AddDigitalInputChannel("fibreAmpSeedErr", aoBoard, 0, 2);
AddDigitalInputChannel("fibreAmpBackFeflectErr", aoBoard, 0, 3);
AddDigitalInputChannel("fibreAmpTempErr", aoBoard, 0, 4);
AddDigitalInputChannel("fibreAmpPowerSupplyErr", aoBoard, 0, 5);
// map the analog channels
// These channels are on the daq board. Used mainly for diagnostic purposes.
// On no account should they switch during the edm acquisition pattern.
AddAnalogInputChannel("diodeLaserCurrent", daqBoard + "/ai0", AITerminalConfiguration.Differential);
AddAnalogInputChannel("iodine", daqBoard + "/ai2", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("cavity", daqBoard + "/ai3", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("probePD", daqBoard + "/ai4", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("pumpPD", daqBoard + "/ai5", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("northLeakage", daqBoard + "/ai6", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("southLeakage", daqBoard + "/ai7", AITerminalConfiguration.Nrse);
// Used ai13,11 & 12 over 6,7 & 8 for miniFluxgates, because ai8, 9 have an isolated ground.
AddAnalogInputChannel("miniFlux1", daqBoard + "/ai13", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("miniFlux2", daqBoard + "/ai11", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("miniFlux3", daqBoard + "/ai12", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("piMonitor", daqBoard + "/ai10", AITerminalConfiguration.Nrse);
//AddAnalogInputChannel("diodeLaserRefCavity", daqBoard + "/ai13", AITerminalConfiguration.Nrse);
// Don't use ai10, cross talk with other channels on this line
// high quality analog inputs (will be) on the S-series analog in board
AddAnalogInputChannel("top", analogIn + "/ai0", AITerminalConfiguration.Differential);
AddAnalogInputChannel("norm", analogIn + "/ai1", AITerminalConfiguration.Differential);
AddAnalogInputChannel("magnetometer", analogIn + "/ai2", AITerminalConfiguration.Differential);
AddAnalogInputChannel("gnd", analogIn + "/ai3", AITerminalConfiguration.Differential);
AddAnalogInputChannel("battery", analogIn + "/ai4", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("piMonitor", analogIn + "/ai5", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("bFieldCurrentMonitor", analogIn + "/ai6", AITerminalConfiguration.Differential);
AddAnalogInputChannel("reflectedrf1Amplitude", analogIn + "/ai5", AITerminalConfiguration.Differential);
AddAnalogInputChannel("reflectedrf2Amplitude", analogIn + "/ai6", AITerminalConfiguration.Differential);
AddAnalogInputChannel("rfCurrent", analogIn + "/ai7 ", AITerminalConfiguration.Differential);
AddAnalogOutputChannel("phaseScramblerVoltage", aoBoard + "/ao0");
AddAnalogOutputChannel("b", aoBoard + "/ao1");
// rf rack control
//AddAnalogInputChannel("rfPower", usbDAQ1 + "/ai0", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("rf1Attenuator", usbDAQ1 + "/ao0", 0, 5);
AddAnalogOutputChannel("rf2Attenuator", usbDAQ1 + "/ao1", 0, 5);
AddAnalogOutputChannel("rf1FM", usbDAQ2 + "/ao0", 0, 5);
AddAnalogOutputChannel("rf2FM", usbDAQ2 + "/ao1", 0, 5);
// E field control and monitoring
AddAnalogInputChannel("cPlusMonitor", usbDAQ3 + "/ai1", AITerminalConfiguration.Differential);
AddAnalogInputChannel("cMinusMonitor", usbDAQ3 + "/ai2", AITerminalConfiguration.Differential);
AddAnalogOutputChannel("cPlus", usbDAQ3 + "/ao0", 0, 10);
AddAnalogOutputChannel("cMinus", usbDAQ3 + "/ao1", 0, 10);
// B field control
//AddAnalogOutputChannel("steppingBBias", usbDAQ4 + "/ao0", 0, 5);
// map the counter channels
AddCounterChannel("phaseLockOscillator", counterBoard + "/ctr7");
AddCounterChannel("phaseLockReference", counterBoard + "/pfi10");
//AddCounterChannel("northLeakage", counterBoard + "/ctr0");
//AddCounterChannel("southLeakage", counterBoard + "/ctr1");
//TCL Lockable lasers
//Info.Add("TCLLockableLasers", new string[][] { new string[] { "flPZT2" }, /*new string[] { "flPZT2Temp" },*/ new string[] { "fibreAOM", "flPZT2Temp" } });
Info.Add("TCLLockableLasers", new string[] { "flPZT2" }); //, new string[] { "flPZT2Temp" }, new string[] { "fibreAOM"} });
Info.Add("TCLPhotodiodes", new string[] { "transCavV", "master", "p1" }); // THE FIRST TWO MUST BE CAVITY AND MASTER PHOTODIODE!!!!
Info.Add("TCL_Slave_Voltage_Limit_Upper", 10.0); //volts: Laser control
Info.Add("TCL_Slave_Voltage_Limit_Lower", 0.0); //volts: Laser control
Info.Add("TCL_Default_Gain", -1.1);
//Info.Add("TCL_Default_ScanPoints", 250);
Info.Add("TCL_Default_VoltageToLaser", 2.5);
Info.Add("TCL_Default_VoltageToDependent", 1.0);
// Some matching up for TCL
Info.Add("flPZT2", "p1");
Info.Add("flPZT2Temp", "p1");
//Info.Add("fibreAOM", "p1");
Info.Add("TCLTrigger", tclBoard + "/PFI0");
Info.Add("TCL_MAX_INPUT_VOLTAGE", 10.0);
AddAnalogInputChannel("transCavV", tclBoard + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("master", tclBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("p1", tclBoard + "/ai2", AITerminalConfiguration.Rse);
// Laser control
//AddAnalogOutputChannel("flPZT", usbDAQ4 + "/ao1", 0, 5);
AddAnalogOutputChannel("flPZT", aoBoard + "/ao7", 0, 10);
AddAnalogOutputChannel("flPZT2", aoBoard + "/ao2", 0, 10);
AddAnalogOutputChannel("fibreAmpPwr", aoBoard + "/ao3");
//AddAnalogOutputChannel("pumpAOM", aoBoard + "/ao4", 0, 10);
AddAnalogOutputChannel("pumpAOM", usbDAQ4 + "/ao0", 0, 5);
//AddAnalogOutputChannel("flPZT2Temp", aoBoard + "/ao5", 0, 4); //voltage must not exceed 4V for Koheras laser
//AddAnalogOutputChannel("flPZT2Cur", aoBoard + "/ao6", 0, 5); //voltage must not exceed 5V for Koheras laser
//AddAnalogOutputChannel("fibreAOM", usbDAQ4 + "/ao1", 0, 5);
AddAnalogOutputChannel("rampfb", aoBoard + "/ao4", -10, 10);
AddAnalogOutputChannel("I2LockBias", aoBoard + "/ao5", 0, 5);
}
public PXIEDMHardware()
{
// add the boards
Boards.Add("daq", "/PXI1Slot18");
Boards.Add("pg", "/PXI1Slot10");
Boards.Add("doBoard", "/PXI1Slot11");
Boards.Add("analogIn2", "/PXI1Slot17");
Boards.Add("counter", "/PXI1Slot16");
Boards.Add("aoBoard", "/PXI1Slot2");
// this drives the rf attenuators
Boards.Add("usbDAQ1", "/Dev2");
Boards.Add("analogIn", "/PXI1Slot15");
Boards.Add("usbDAQ2", "/Dev4");
Boards.Add("usbDAQ3", "/Dev1");
Boards.Add("usbDAQ4", "/Dev3");
//Boards.Add("tclBoardPump", "/PXI1Slot17");
//Boards.Add("tclBoardProbe", "/PXI1Slot9");
string rfAWG = (string)Boards["rfAWG"];
string pgBoard = (string)Boards["pg"];
string daqBoard = (string)Boards["daq"];
string analogIn2 = (string)Boards["analogIn2"];
string counterBoard = (string)Boards["counter"];
string aoBoard = (string)Boards["aoBoard"];
string usbDAQ1 = (string)Boards["usbDAQ1"];
string analogIn = (string)Boards["analogIn"];
string usbDAQ2 = (string)Boards["usbDAQ2"];
string usbDAQ3 = (string)Boards["usbDAQ3"];
string usbDAQ4 = (string)Boards["usbDAQ4"];
string doBoard = (string)Boards["doBoard"];
//string tclBoardPump = (string)Boards["tclBoardPump"];
//string tclBoardProbe = (string)Boards["tclBoardProbe"];
// add things to the info
// the analog triggers
Info.Add("analogTrigger0", (string)Boards["analogIn"] + "/PFI0");
Info.Add("analogTrigger1", (string)Boards["analogIn"] + "/PFI1");
Info.Add("sourceToDetect", 1.3);
Info.Add("moleculeMass", 193.0);
Info.Add("machineLengthRatio", 3.842);
Info.Add("defaultGate", new double[] { 2190, 80 });
Info.Add("phaseLockControlMethod", "synth");
Info.Add("PGClockLine", pgBoard + "/PFI4"); //Mapped to PFI2 on 6533 connector
Info.Add("PatternGeneratorBoard", pgBoard);
Info.Add("PGType", "dedicated");
// rf counter switch control seq``
Info.Add("IodineFreqMon", new bool[] { false, false }); // IN 1
Info.Add("pumpAOMFreqMon", new bool[] { false, true }); // IN 2
Info.Add("FLModulationFreqMon", new bool[] { true, false }); // IN 3
Info.Add("PGTrigger", pgBoard + "/PFI5"); //Mapped to PFI7 on 6533 connector
// YAG laser
yag = new BrilliantLaser("ASRL13::INSTR");
// add the GPIB/RS232/USB instruments
Instruments.Add("green", new HP8657ASynth("GPIB0::7::INSTR"));
//Instruments.Add("gigatronix", new Gigatronics7100Synth("GPIB0::19::INSTR"));
Instruments.Add("red", new HP3325BSynth("ASRL12::INSTR"));
Instruments.Add("4861", new ICS4861A("GPIB0::4::INSTR"));
Instruments.Add("bCurrentMeter", new HP34401A("GPIB0::12::INSTR"));
Instruments.Add("rfCounter", new Agilent53131A("GPIB0::3::INSTR"));
//Instruments.Add("rfCounter2", new Agilent53131A("GPIB0::5::INSTR"));
Instruments.Add("rfPower", new HP438A("GPIB0::13::INSTR"));
Instruments.Add("BfieldController", new SerialDAQ("ASRL19::INSTR"));
Instruments.Add("rfCounter2", new SerialAgilent53131A("ASRL17::INSTR"));
Instruments.Add("probePolControl", new SerialMotorControllerBCD("ASRL8::INSTR"));
Instruments.Add("pumpPolControl", new SerialMotorControllerBCD("ASRL11::INSTR"));
Instruments.Add("anapico", new AnapicoSynth("USB0::1003::45055::321-028100000-0168::0::INSTR")); //old anapico 1 channel
Instruments.Add("anapicoSYN420", new AnapicoSynth("USB0::0x03EB::0xAFFF::322-03A100005-0539::INSTR")); // new 2 channel anapico
Instruments.Add("rfAWG", new NIPXI5670("PXI1Slot4"));
// map the digital channels
// these channels are generally switched by the pattern generator
// they're all in the lower half of the pg
AddDigitalOutputChannel("valve", pgBoard, 0, 0);
AddDigitalOutputChannel("flash", pgBoard, 0, 1);
AddDigitalOutputChannel("q", pgBoard, 0, 2);
AddDigitalOutputChannel("detector", pgBoard, 0, 3);
AddDigitalOutputChannel("detectorprime", pgBoard, 1, 2); // this trigger is for switch scanning
// see ModulatedAnalogShotGatherer.cs
// for details.
AddDigitalOutputChannel("rfSwitch", pgBoard, 0, 4);
AddDigitalOutputChannel("fmSelect", pgBoard, 1, 0); // This line selects which fm voltage is
// sent to the synth.
AddDigitalOutputChannel("attenuatorSelect", pgBoard, 0, 5); // This line selects the attenuator voltage
// sent to the voltage-controlled attenuator.
AddDigitalOutputChannel("piFlip", pgBoard, 1, 1);
//AddDigitalOutputChannel("ttlSwitch", pgBoard, 1, 3); // This is the output that the pg
// will switch if it's switch scanning.
AddDigitalOutputChannel("ttlSwitch", pgBoard, 3, 5); // This is the output that the pg
AddDigitalOutputChannel("scramblerEnable", pgBoard, 1, 4);
//RF Counter Control (single pole 4 throw)
//AddDigitalOutputChannel("rfCountSwBit1", pgBoard, 3, 5);
//AddDigitalOutputChannel("rfCountSwBit2", pgBoard, 3, 6);
// new rf amp blanking
AddDigitalOutputChannel("rfAmpBlanking", pgBoard, 1, 5);
AddDigitalOutputChannel("mwEnable", pgBoard, 3, 3);
AddDigitalOutputChannel("mwSelectPumpChannel", pgBoard, 3, 6);
AddDigitalOutputChannel("mwSelectTopProbeChannel", pgBoard, 3, 2);
AddDigitalOutputChannel("mwSelectBottomProbeChannel", pgBoard, 2, 4);
AddDigitalOutputChannel("pumprfSwitch", pgBoard, 3, 4);
// rf awg test
AddDigitalOutputChannel("rfAWGTestTrigger", doBoard, 0, 1);
// these channel are usually software switched - they are on the AO board
AddDigitalOutputChannel("b", aoBoard, 0, 0);
AddDigitalOutputChannel("notB", aoBoard, 0, 1);
AddDigitalOutputChannel("db", aoBoard, 0, 2);
AddDigitalOutputChannel("notDB", aoBoard, 0, 3);
AddDigitalOutputChannel("piFlipEnable", aoBoard, 0, 4);
AddDigitalOutputChannel("notPIFlipEnable", aoBoard, 0, 5); //not connected to anything
AddDigitalOutputChannel("mwSwitching", aoBoard, 0, 6);
// these digitial outputs are switched slowly during the pattern
AddDigitalOutputChannel("ePol", usbDAQ4, 0, 4);
AddDigitalOutputChannel("notEPol", usbDAQ4, 0, 5);
AddDigitalOutputChannel("eBleed", usbDAQ4, 0, 6);
AddDigitalOutputChannel("eSwitching", usbDAQ4, 0, 7);
// these digitial outputs are are not switched during the pattern
AddDigitalOutputChannel("argonShutter", usbDAQ4, 0, 0);
AddDigitalOutputChannel("patternTTL", usbDAQ4, 0, 2);
AddDigitalOutputChannel("rfPowerAndFreqSelectSwitch", usbDAQ4, 0, 3);
AddDigitalOutputChannel("targetStepper", usbDAQ4, 0, 1);;
// map the analog channels
// These channels are on the daq board. Used mainly for diagnostic purposes.
AddAnalogInputChannel("iodine", daqBoard + "/ai2", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("valveMonVoltage", daqBoard + "/ai4", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("cavity", daqBoard + "/ai3", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("topPD", daqBoard + "/ai3", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("bottomPD", daqBoard + "/ai5", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("northLeakage", daqBoard + "/ai6", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("southLeakage", daqBoard + "/ai7", AITerminalConfiguration.Nrse);
//AddAnalogInputChannel("northLeakage", usbDAQ4 + "/ai0", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("southLeakage", usbDAQ4 + "/ai1", AITerminalConfiguration.Rse);
// Used ai13,11 & 12 over 6,7 & 8 for miniFluxgates, because ai8, 9 have an isolated ground.
AddAnalogInputChannel("miniFlux1", daqBoard + "/ai13", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("miniFlux2", daqBoard + "/ai11", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("miniFlux3", daqBoard + "/ai12", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("ground", daqBoard + "/ai14", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("piMonitor", daqBoard + "/ai10", AITerminalConfiguration.Nrse);
//AddAnalogInputChannel("diodeLaserRefCavity", daqBoard + "/ai13", AITerminalConfiguration.Nrse);
// Don't use ai10, cross talk with other channels on this line
// high quality analog inputs (will be) on the S-series analog in board
// The last number in AddAnalogInputChannel is an optional calibration which turns VuS and MHz
AddAnalogInputChannel("topProbe", analogIn + "/ai0", AITerminalConfiguration.Differential, 0.1);
AddAnalogInputChannel("bottomProbe", analogIn + "/ai1", AITerminalConfiguration.Differential, 0.02);
AddAnalogInputChannel("magnetometer", analogIn + "/ai2", AITerminalConfiguration.Differential);
AddAnalogInputChannel("gnd", analogIn + "/ai3", AITerminalConfiguration.Differential);
AddAnalogInputChannel("battery", analogIn + "/ai4", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("piMonitor", analogIn + "/ai5", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("bFieldCurrentMonitor", analogIn + "/ai6", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("reflectedrf1Amplitude", analogIn + "/ai5", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("reflectedrf2Amplitude", analogIn + "/ai6", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("rfCurrent", analogIn + "/ai7 ", AITerminalConfiguration.Differential);
AddAnalogInputChannel("middlePenningGauge", daqBoard + "/ai15", AITerminalConfiguration.Rse); //nothing is connected here; only here bc hardware controller needs it to build
//temp inputs used for magnetic noise diagnosis in test shield, cables are labelled "00EW"
AddAnalogInputChannel("quSpinFS_Y", analogIn + "/ai5", AITerminalConfiguration.Differential);
AddAnalogInputChannel("quSpinFS_Z", analogIn + "/ai6", AITerminalConfiguration.Differential);
//mag inputs for quspins inside the chamber
AddAnalogInputChannel("quSpinFV_Y", analogIn2 + "/ai2", AITerminalConfiguration.Differential);
AddAnalogInputChannel("quSpinFV_Z", analogIn2 + "/ai3", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinB0_Y", analogIn2 + "/ai2", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinB0_Z", analogIn2 + "/ai3", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinEV_Y", analogIn + "/ai6", AITerminalConfiguration.Differential);
AddAnalogInputChannel("quSpinEV_Z", analogIn2 + "/ai1", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinEW_Y", analogIn + "/ai5", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinEW_Z", analogIn + "/ai7", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinEX_Y", analogIn2 + "/ai4", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinEX_Z", analogIn2 + "/ai5", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinEU_Y", analogIn2 + "/ai6", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("quSpinEU_Z", analogIn2 + "/ai7", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("battery2", analogIn2 + "/ai7", AITerminalConfiguration.Differential);//temp move to have battery on both DAQs to monitor
//AddAnalogInputChannel("Bart200_Z", analogIn + "/ai5", AITerminalConfiguration.Differential);//this was stolen from penning gauge monitor
//AddAnalogInputChannel("Bart200_X", daqBoard + "/ai3", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("Bart200_Y", daqBoard + "/ai15", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("Bart200_Z", daqBoard + "/ai5", AITerminalConfiguration.Rse);//stolen from pump and probe mon pds, which are legacy so can be replaced anyway
//This analog input is broken, we assign this as a dummy so we don't break the rest of the code
AddAnalogInputChannel("laserPowerMeter", analogIn2 + "/ai0", AITerminalConfiguration.Differential);
AddAnalogOutputChannel("phaseScramblerVoltage", aoBoard + "/ao10");
AddAnalogOutputChannel("bScan", aoBoard + "/ao2");
//Coherent 899 dye laser ctrl voltage
AddAnalogOutputChannel("Coherent899ControlVoltage", aoBoard + "/ao12", -5, 5);
// B field control
//AddAnalogOutputChannel("steppingBBias", usbDAQ4 + "/ao0", 0, 5);
// Add B field stepping box bias analog output to this board for now (B field controller is not connected to anything!)
AddAnalogOutputChannel("steppingBBias", aoBoard + "/ao8", -10, 10);
// rf rack control
//AddAnalogInputChannel("rfPower", usbDAQ1 + "/ai0", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("rf1Attenuator", usbDAQ1 + "/ao0", 0, 5);
AddAnalogOutputChannel("rf2Attenuator", usbDAQ1 + "/ao1", 0, 5);
AddAnalogOutputChannel("rf1FM", usbDAQ2 + "/ao0", 0, 5);
AddAnalogOutputChannel("rf2FM", usbDAQ2 + "/ao1", 0, 5);
//Source control
AddAnalogOutputChannel("valveCtrlVoltage", aoBoard + "/ao14", 0, 8);
// E field control and monitoring
AddAnalogInputChannel("cPlusMonitor", usbDAQ3 + "/ai1", AITerminalConfiguration.Differential);
AddAnalogInputChannel("cMinusMonitor", usbDAQ3 + "/ai2", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("cPlusMonitor", daqBoard + "/ai0", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("cMinusMonitor", daqBoard + "/ai1", AITerminalConfiguration.Differential);
AddAnalogOutputChannel("cPlus", usbDAQ3 + "/ao1", 0, 10);
AddAnalogOutputChannel("cMinus", usbDAQ3 + "/ao0", 0, 10); //Use these two lines for the applied kilovolts supply which provides 1kV/V
//AddAnalogOutputChannel("cPlus", usbDAQ3 + "/ao1", 0,3.5);//these last two are for use with the bertan HV supply which requires 0 to -5V control voltage for 0 to +15kV output on the positive box
//AddAnalogOutputChannel("cMinus", usbDAQ3 + "/ao0", -3.5,0);
// map the counter channels
AddCounterChannel("phaseLockOscillator", counterBoard + "/ctr7");
AddCounterChannel("phaseLockReference", counterBoard + "/pfi10");
//AddCounterChannel("northLeakage", counterBoard + "/ctr0");
//AddCounterChannel("southLeakage", counterBoard + "/ctr1");
// Cavity inputs for the cavity that controls the Pump lasers
//AddAnalogInputChannel("PumpCavityRampVoltage", tclBoardPump + "/ai8", AITerminalConfiguration.Rse); //tick
//AddAnalogInputChannel("Pumpmaster", tclBoardPump + "/ai1", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("Pumpp1", tclBoardPump + "/ai2", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("Pumpp2", tclBoardPump + "/ai3", AITerminalConfiguration.Rse);
// Lasers locked to pump cavity
//AddAnalogOutputChannel("KeopsysDiodeLaser", tclBoardPump + "/ao2", -4, 4); //tick
//AddAnalogOutputChannel("MenloPZT", tclBoardPump + "/ao0", 0, 10); //tick
// Length stabilisation for pump cavity
//AddAnalogOutputChannel("PumpCavityLengthVoltage", tclBoardPump + "/ao1", -10, 10); //tick
//TCL configuration for pump cavity
//TCLConfig tcl1 = new TCLConfig("Pump Cavity");
//tcl1.AddLaser("MenloPZT", "Pumpp1");
//tcl1.AddLaser("KeopsysDiodeLaser", "Pumpp2");
//tcl1.Trigger = tclBoardPump + "/PFI0";
//tcl1.Cavity = "PumpCavityRampVoltage";
//tcl1.MasterLaser = "Pumpmaster";
//tcl1.Ramp = "PumpCavityLengthVoltage";
//tcl1.TCPChannel = 1190;
//tcl1.AnalogSampleRate = 61250;
//tcl1.DefaultScanPoints = 500;
//tcl1.MaximumNLMFSteps = 20;
//tcl1.PointsToConsiderEitherSideOfPeakInFWHMs = 2.5;
//tcl1.TriggerOnRisingEdge = false;
//tcl1.AddFSRCalibration("MenloPZT", 3.84);
//tcl1.AddFSRCalibration("KeopsysDiodeLaser", 3.84);
//tcl1.AddDefaultGain("Master", 0.3);
//tcl1.AddDefaultGain("MenloPZT", -0.2);
//tcl1.AddDefaultGain("KeopsysDiodeLaser", 4);
//Info.Add("PumpCavity", tcl1);
//Info.Add("DefaultCavity", tcl1);
// Probe cavity inputs
//AddAnalogInputChannel("ProbeRampVoltage", tclBoardProbe + "/ai0", AITerminalConfiguration.Rse); //tick
//AddAnalogInputChannel("Probemaster", tclBoardProbe + "/ai1", AITerminalConfiguration.Rse); //tick
//AddAnalogInputChannel("Probep1", tclBoardProbe + "/ai2", AITerminalConfiguration.Rse); //tick
// Lasers locked to Probe cavity
//AddAnalogOutputChannel("TopticaSHGPZT", tclBoardProbe + "/ao0", -4, 4); //tick
//AddAnalogOutputChannel("ProbeCavityLengthVoltage", tclBoardProbe + "/ao1", -10, 10); //tick
// TCL configuration for Probe cavity
//TCLConfig tcl2 = new TCLConfig("Probe Cavity");
//tcl2.AddLaser("TopticaSHGPZT", "Probep1");
//tcl2.Trigger = tclBoardProbe + "/PFI0";
//tcl2.Cavity = "ProbeRampVoltage";
//tcl2.MasterLaser = "Probemaster";
//tcl2.Ramp = "ProbeCavityLengthVoltage";
//tcl2.TCPChannel = 1191;
//tcl2.AnalogSampleRate = 61250/2;
//tcl2.DefaultScanPoints = 250;
//tcl2.MaximumNLMFSteps = 20;
//tcl2.PointsToConsiderEitherSideOfPeakInFWHMs = 12;
//tcl2.AddFSRCalibration("TopticaSHGPZT", 3.84);
//tcl2.TriggerOnRisingEdge = false;
//tcl2.AddDefaultGain("Master", 0.4);
//tcl2.AddDefaultGain("TopticaSHGPZT", 0.04);
//Info.Add("ProbeCavity", tcl2);
//Info.Add("DefaultCavity", tcl2);
//probe AOM control
AddAnalogOutputChannel("probeAOM", aoBoard + "/ao29", 0, 10);
AddAnalogOutputChannel("probeAOMamp", aoBoard + "/ao28", 0, 10);
//Obselete Laser control
AddAnalogOutputChannel("pumpAOM", aoBoard + "/ao20", 0, 10);
AddAnalogOutputChannel("fibreAmpPwr", aoBoard + "/ao3");
AddAnalogOutputChannel("I2LockBias", aoBoard + "/ao5", 0, 5);
//Microwave Control Channels
AddAnalogOutputChannel("uWaveDCFM", aoBoard + "/ao11", -2.5, 2.5);
//AddAnalogOutputChannel("uWaveMixerV", aoBoard + "/ao12", 0, 10);
AddAnalogOutputChannel("pumpMixerV", aoBoard + "/ao19", 0, 5);
AddAnalogOutputChannel("bottomProbeMixerV", aoBoard + "/ao24", 0, 5);
AddAnalogOutputChannel("topProbeMixerV", aoBoard + "/ao25", 0, 5);
//RF control Channels
AddAnalogOutputChannel("VCO161Amp", aoBoard + "/ao13", 0, 10);
AddAnalogOutputChannel("VCO161Freq", aoBoard + "/ao14", 0, 10);
AddAnalogOutputChannel("VCO30Amp", aoBoard + "/ao15", 0, 10);
AddAnalogOutputChannel("VCO30Freq", aoBoard + "/ao16", 0, 10);
AddAnalogOutputChannel("VCO155Amp", aoBoard + "/ao17", 0, 10);
AddAnalogOutputChannel("VCO155Freq", aoBoard + "/ao18", 0, 10);
}
public BufferClassicHardware()
{
// add the boards
Boards.Add("daq", "/DAQ_PXIe_6363");
Boards.Add("pg", "/PG_PXIe_6535");
Boards.Add("tcl", "/TCL_PXI_6229");
Boards.Add("UEDMHardwareController", "/UEDM_Hardware_Controller_PXI_6229");
string daqBoard = (string)Boards["daq"];
string pgBoard = (string)Boards["pg"];
string TCLBoard = (string)Boards["tcl"];
string UEDMHardwareControllerBoard = (string)Boards["UEDMHardwareController"];
// map the digital channels of the "pg" card
AddDigitalOutputChannel("q", pgBoard, 0, 0); //Pin 10
AddDigitalOutputChannel("aom", pgBoard, 1, 1); //
AddDigitalOutputChannel("aom2", pgBoard, 1, 2); //
AddDigitalOutputChannel("shutter1", pgBoard, 1, 3); //
AddDigitalOutputChannel("shutter2", pgBoard, 1, 4); //
AddDigitalOutputChannel("flash", pgBoard, 0, 2); //Pin 45
AddDigitalOutputChannel("chirpTrigger", pgBoard, 0, 3);
//(0,3) pin 12 is unconnected
//AddDigitalOutputChannel("heatersS1TriggerDigitalOutputTask", pgBoard, 1, 6);// Pin 21, used to be "shutterTrig1" (triggers camera for on-shots (not wired up))
//AddDigitalOutputChannel("heatersS2TriggerDigitalOutputTask", pgBoard, 1, 7);// Pin 22, used to be "shutterTrig2" (triggers camera for off-shots (not wired up))
AddDigitalOutputChannel("probe", pgBoard, 0, 1); //Pin 44 previously connected to aom (not wired up)
AddDigitalOutputChannel("valve", pgBoard, 0, 6); //
AddDigitalOutputChannel("detector", pgBoard, 1, 0); //Pin 16 (onShot)from pg to daq
AddDigitalOutputChannel("detectorprime", pgBoard, 0, 7); //Pin 15 (OffShot)from pg to daq
//digital output P 0.6 wired up, not used (Pin 48)
// map the digital channels of the "daq" card
// this is the digital output from the daq board that the TTlSwitchPlugin wil switch
AddDigitalOutputChannel("digitalSwitchChannel", daqBoard, 0, 0);//enable for camera
//AddDigitalOutputChannel("cryoTriggerDigitalOutputTask", daqBoard, 0, 0);// cryo cooler digital logic
// add things to the info
// the analog triggers
Info.Add("analogTrigger0", daqBoard + "/PFI0");
Info.Add("analogTrigger1", daqBoard + "/PFI1");
Info.Add("phaseLockControlMethod", "analog");
Info.Add("PGClockLine", Boards["pg"] + "/PFI4");
Info.Add("PatternGeneratorBoard", pgBoard);
Info.Add("PGType", "dedicated");
// external triggering control
Info.Add("PGTrigger", pgBoard + "/PFI1"); //Mapped to PFI7 on 6533 connector
// map the analog input channels for "daq" card
AddAnalogInputChannel("Temp1", daqBoard + "/ai0", AITerminalConfiguration.Rse); //Pin 31
AddAnalogInputChannel("pressureGauge_beamline", daqBoard + "/ai1", AITerminalConfiguration.Rse); //Pin 31. Used to be "Temp2"
AddAnalogInputChannel("TempRef", daqBoard + "/ai2", AITerminalConfiguration.Rse); //Pin 66
//AddAnalogInputChannel("pressureGauge_source", daqBoard + "/ai3", AITerminalConfiguration.Rse);//Pin 33 pressure reading at the moment
AddAnalogInputChannel("detector1", daqBoard + "/ai4", AITerminalConfiguration.Rse); //Pin 68
AddAnalogInputChannel("detector2", daqBoard + "/ai5", AITerminalConfiguration.Rse); //Pin
AddAnalogInputChannel("detector3", daqBoard + "/ai6", AITerminalConfiguration.Rse); //Pin 34
AddAnalogInputChannel("cavitylong", daqBoard + "/ai7", AITerminalConfiguration.Rse); //Pin 28
//AddAnalogInputChannel("cellTemperatureMonitor", daqBoard + "/ai8", AITerminalConfiguration.Rse);//Pin 60 used to be "cavityshort"
// map the analog output channels for "daq" card
AddAnalogOutputChannel("IRrampfb", daqBoard + "/ao0"); //Pin 22
AddAnalogOutputChannel("v2laser", daqBoard + "/ao1"); //pin 21
// map the analog input channels for the "UEDMHardwareControllerBoard" card
AddAnalogInputChannel("cellTemperatureMonitor", UEDMHardwareControllerBoard + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("S1TemperatureMonitor", UEDMHardwareControllerBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("S2TemperatureMonitor", UEDMHardwareControllerBoard + "/ai2", AITerminalConfiguration.Rse);
AddAnalogInputChannel("SF6TemperatureMonitor", UEDMHardwareControllerBoard + "/ai3", AITerminalConfiguration.Rse);
AddAnalogInputChannel("pressureGaugeSource", UEDMHardwareControllerBoard + "/ai4", AITerminalConfiguration.Rse);
AddAnalogInputChannel("pressureGaugeBeamline", UEDMHardwareControllerBoard + "/ai5", AITerminalConfiguration.Rse);
AddAnalogInputChannel("AI11", UEDMHardwareControllerBoard + "/ai11", AITerminalConfiguration.Rse);
AddAnalogInputChannel("AI12", UEDMHardwareControllerBoard + "/ai12", AITerminalConfiguration.Rse);
AddAnalogInputChannel("AI13", UEDMHardwareControllerBoard + "/ai13", AITerminalConfiguration.Rse);
AddAnalogInputChannel("AI14", UEDMHardwareControllerBoard + "/ai14", AITerminalConfiguration.Rse);
AddAnalogInputChannel("AI15", UEDMHardwareControllerBoard + "/ai15", AITerminalConfiguration.Rse);
// map the digital channels of the "UEDMHardwareControllerBoard" card
AddDigitalOutputChannel("Port00", UEDMHardwareControllerBoard, 0, 0);
AddDigitalOutputChannel("Port01", UEDMHardwareControllerBoard, 0, 1);
AddDigitalOutputChannel("Port02", UEDMHardwareControllerBoard, 0, 2);
AddDigitalOutputChannel("Port03", UEDMHardwareControllerBoard, 0, 3);
AddDigitalOutputChannel("heatersS2TriggerDigitalOutputTask", UEDMHardwareControllerBoard, 0, 4);
AddDigitalOutputChannel("heatersS1TriggerDigitalOutputTask", UEDMHardwareControllerBoard, 0, 5);
// map the analog output channels for the "UEDMHardwareControllerBoard" card
//AddAnalogOutputChannel("laser", Unnamed + "/ao0");
//AddAnalogOutputChannel("phaseLockAnalogOutput", Unnamed + "/ao1")
// map the digital channels of the "UEDMHardwareControllerBoard" card
//AddDigitalOutputChannel("cryoTriggerDigitalOutputTask", UEDMHardwareControllerBoard, 0, 0);// cryo cooler digital logic
// map the analog input channels for the "tcl" card
AddAnalogInputChannel("VISmaster", TCLBoard + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("VIScavityRampMonitor", TCLBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("VISp1_v1laser", TCLBoard + "/ai2", AITerminalConfiguration.Rse);
AddAnalogInputChannel("VISp2_probelaser", TCLBoard + "/ai3", AITerminalConfiguration.Rse);
AddAnalogInputChannel("VISp3_v0laser", TCLBoard + "/ai4", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("xxx", TCLBoard + "/ai5", AITerminalConfiguration.Rse); unused
//AddAnalogInputChannel("xxx", TCLBoard + "/ai6", AITerminalConfiguration.Rse); unused
//AddAnalogInputChannel("xxx", TCLBoard + "/ai7", AITerminalConfiguration.Rse); unused
//AddAnalogInputChannel("xxx", TCLBoard + "/ai8", AITerminalConfiguration.Rse); unused
//AddAnalogInputChannel("xxx", TCLBoard + "/ai9", AITerminalConfiguration.Rse); unused
AddAnalogInputChannel("IRp1_v2laser", TCLBoard + "/ai10", AITerminalConfiguration.Rse);
AddAnalogInputChannel("IRmaster", TCLBoard + "/ai11", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("xxx", TCLBoard + "/ai16", AITerminalConfiguration.Rse); unused
//AddAnalogInputChannel("xxx", TCLBoard + "/ai17", AITerminalConfiguration.Rse); unused
//AddAnalogInputChannel("xxx", TCLBoard + "/ai18", AITerminalConfiguration.Rse); unused
//AddAnalogInputChannel("xxx", TCLBoard + "/ai19", AITerminalConfiguration.Rse); unused
//AddAnalogInputChannel("xxx", TCLBoard + "/ai20", AITerminalConfiguration.Rse); unused
// map the analog output channels for the tcl card
AddAnalogOutputChannel("VISrampfb", TCLBoard + "/ao0");
AddAnalogOutputChannel("v1laser", TCLBoard + "/ao1");
AddAnalogOutputChannel("probelaser", TCLBoard + "/ao2", 0, 10);
AddAnalogOutputChannel("v0laser", TCLBoard + "/ao3", 0, 10);
// add the GPIB/RS232/USB instruments
Instruments.Add("tempController", new LakeShore336TemperatureController("ASRL3::INSTR"));
Instruments.Add("neonFlowController", new FlowControllerMKSPR4000B("ASRL4::INSTR"));
// TCL, we can now put many cavities in a single instance of TCL (thanks to Luke)
// multiple cavities share a single ramp (BaseRamp analog input) + trigger
// Hardware limitation that all read photodiode/ramp signals must share the same hardware card (hardware configured triggered read)
TCLConfig tclConfig = new TCLConfig("TCL");
tclConfig.Trigger = TCLBoard + "/PFI0";
tclConfig.BaseRamp = "VIScavityRampMonitor";
tclConfig.TCPChannel = 1190;
tclConfig.DefaultScanPoints = 1000;
tclConfig.AnalogSampleRate = 15000;
tclConfig.SlaveVoltageLowerLimit = 0.0;
tclConfig.SlaveVoltageUpperLimit = 10.0;
tclConfig.PointsToConsiderEitherSideOfPeakInFWHMs = 4;
tclConfig.MaximumNLMFSteps = 20;
string VISCavity = "VISCavity";
tclConfig.AddCavity(VISCavity);
tclConfig.Cavities[VISCavity].RampOffset = "VISrampfb";
tclConfig.Cavities[VISCavity].MasterLaser = "VISmaster";
tclConfig.Cavities[VISCavity].AddDefaultGain("VISmaster", 0.2);
tclConfig.Cavities[VISCavity].AddSlaveLaser("v1laser", "VISp1_v1laser");
tclConfig.Cavities[VISCavity].AddDefaultGain("v1laser", 0.2);
tclConfig.Cavities[VISCavity].AddFSRCalibration("v1laser", 3.84);
tclConfig.Cavities[VISCavity].AddSlaveLaser("probelaser", "VISp2_probelaser");
tclConfig.Cavities[VISCavity].AddDefaultGain("probelaser", 0.2);
tclConfig.Cavities[VISCavity].AddFSRCalibration("probelaser", 3.84);
tclConfig.Cavities[VISCavity].AddSlaveLaser("v0laser", "VISp3_v0laser");
tclConfig.Cavities[VISCavity].AddDefaultGain("v0laser", 0.2);
tclConfig.Cavities[VISCavity].AddFSRCalibration("v0laser", 3.84);
string IRCavity = "IRCavity";
tclConfig.AddCavity(IRCavity);
tclConfig.Cavities[IRCavity].RampOffset = "IRrampfb";
tclConfig.Cavities[IRCavity].MasterLaser = "IRmaster";
tclConfig.Cavities[IRCavity].AddDefaultGain("IRmaster", 0.2);
tclConfig.Cavities[IRCavity].AddSlaveLaser("v2laser", "IRp1_v2laser");
tclConfig.Cavities[IRCavity].AddDefaultGain("v2laser", 0.2);
tclConfig.Cavities[IRCavity].AddFSRCalibration("v2laser", 3.84);
Info.Add("TCLConfig", tclConfig);
Info.Add("DefaultCavity", tclConfig);
//These need to be activated for the phase lock
//AddCounterChannel("phaseLockOscillator", daqBoard + "/ctr0"); //This should be the source pin of a counter PFI 8
//AddCounterChannel("phaseLockReference", daqBoard + "/PFI9"); //This should be the gate pin of the same counter - need to check it's name
}
public MoleculeMOTHardware()
{
//Boards
string digitalPatternBoardName = "digitalPattern";
string digitalPatternBoardAddress = "/Dev1";
Boards.Add(digitalPatternBoardName, digitalPatternBoardAddress);
string analogPatternBoardName = "analogPattern";
string analogPatternBoardAddress = "/PXI1Slot2"; //7
Boards.Add(analogPatternBoardName, analogPatternBoardAddress);
string tclBoard1Name = "tclBoard1";
string tclBoard1Address = "/PXI1Slot3";
Boards.Add(tclBoard1Name, tclBoard1Address);
string tclBoard2Name = "tclBoard2";
string tclBoard2Address = "/PXI1Slot8";
Boards.Add(tclBoard2Name, tclBoard2Address);
string tclBoard3Name = "tclBoard3";
string tclBoard3Address = "/PXI1Slot6";
Boards.Add(tclBoard3Name, tclBoard3Address);
string usbBoard1Name = "usbBoard1";
string usbBoard1Address = "/Dev2";
Boards.Add(usbBoard1Name, usbBoard1Address);
string usbBoard2Name = "usbBoard2";
string usbBoard2Address = "/Dev3";
Boards.Add(usbBoard2Name, usbBoard2Address);
string digitalPatternBoardName2 = "digitalPattern2";
string digitalPatternBoardAddress2 = "/PXI1Slot4";
Boards.Add(digitalPatternBoardName2, digitalPatternBoardAddress2);
// Channel Declarations
AddAnalogInputChannel("ramp", tclBoard1Address + "/ai4", AITerminalConfiguration.Rse);
// Hamish
AddAnalogInputChannel("v00PD", tclBoard1Address + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("v10PD", tclBoard1Address + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("bXPD", tclBoard1Address + "/ai2", AITerminalConfiguration.Rse);
AddDigitalInputChannel("bXLockBlockFlag", tclBoard1Address, 0, 0);
AddDigitalInputChannel("v00LockBlockFlag", tclBoard1Address, 0, 1);
AddAnalogInputChannel("refPDHamish", tclBoard1Address + "/ai3", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("v00Lock", tclBoard1Address + "/ao0");
AddAnalogOutputChannel("v10Lock", tclBoard1Address + "/ao1");
AddAnalogOutputChannel("bXLock", tclBoard3Address + "/ao2");
AddAnalogOutputChannel("cavityLockHamish", tclBoard3Address + "/ao3");
// Carlos
AddAnalogInputChannel("v21PD", tclBoard1Address + "/ai5", AITerminalConfiguration.Rse);
AddAnalogInputChannel("v32PD", tclBoard1Address + "/ai6", AITerminalConfiguration.Rse);
AddAnalogInputChannel("refPDCarlos", tclBoard1Address + "/ai7", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("v21Lock", tclBoard2Address + "/ao0");
AddAnalogOutputChannel("v32Lock", usbBoard1Address + "/ao0", 0, 5);
AddAnalogOutputChannel("cavityLockCarlos", tclBoard2Address + "/ao1");
// Digital Pattern
AddDigitalOutputChannel("flashLamp", digitalPatternBoardAddress, 0, 0);
AddDigitalOutputChannel("qSwitch", digitalPatternBoardAddress, 0, 1);
AddDigitalOutputChannel("bXSlowingAOM", digitalPatternBoardAddress, 0, 2);
AddDigitalOutputChannel("v00MOTAOM", digitalPatternBoardAddress, 0, 3);
AddDigitalOutputChannel("v10SlowingAOM", digitalPatternBoardAddress, 0, 4);
AddDigitalOutputChannel("microwaveA", digitalPatternBoardAddress, 0, 5);
AddDigitalOutputChannel("microwaveB", digitalPatternBoardAddress, 0, 6);
AddDigitalOutputChannel("cameraTrigger", digitalPatternBoardAddress, 0, 7);
AddDigitalOutputChannel("cameraTrigger2", digitalPatternBoardAddress, 1, 7);
AddDigitalOutputChannel("aoPatternTrigger", digitalPatternBoardAddress, 1, 0);
AddDigitalOutputChannel("v00MOTShutter", digitalPatternBoardAddress, 1, 1);
AddDigitalOutputChannel("bXSlowingShutter", digitalPatternBoardAddress, 1, 2);
AddDigitalOutputChannel("bXLockBlock", digitalPatternBoardAddress, 1, 3);
AddDigitalOutputChannel("v00LockBlock", digitalPatternBoardAddress, 2, 1);
AddDigitalOutputChannel("topCoilDirection", digitalPatternBoardAddress, 1, 4);
AddDigitalOutputChannel("bottomCoilDirection", digitalPatternBoardAddress, 1, 5);
AddDigitalOutputChannel("rbCoolingAOM", digitalPatternBoardAddress, 1, 6);
AddDigitalOutputChannel("v00Sidebands", digitalPatternBoardAddress, 2, 0);
AddDigitalOutputChannel("heliumShutter", digitalPatternBoardAddress, 2, 2);
AddDigitalOutputChannel("microwaveC", digitalPatternBoardAddress, 3, 2);
// Rb Digital Pattern
AddDigitalOutputChannel("rbPushBeam", digitalPatternBoardAddress, 1, 6);
AddDigitalOutputChannel("rbOpticalPumpingAOM", digitalPatternBoardAddress, 2, 3);
AddDigitalOutputChannel("rbAbsImagingBeam", digitalPatternBoardAddress, 2, 5);
AddDigitalOutputChannel("rbRepump", digitalPatternBoardAddress, 2, 6);
AddDigitalOutputChannel("rb2DCooling", digitalPatternBoardAddress, 2, 7);
AddDigitalOutputChannel("rb3DCooling", digitalPatternBoardAddress, 3, 0);
AddDigitalOutputChannel("rbAbsImgCamTrig", digitalPatternBoardAddress, 3, 1);
// Rb shutters
AddDigitalOutputChannel("rb3DMOTShutter", digitalPatternBoardAddress, 2, 4);
AddDigitalOutputChannel("rb2DMOTShutter", digitalPatternBoardAddress, 3, 5);
//AddDigitalOutputChannel("rbspeedbumpCoilsBamAbsorptionShutter", digitalPatternBoardAddress, 3, 6);
AddDigitalOutputChannel("rbPushBamAbsorptionShutter", digitalPatternBoardAddress, 3, 6);
AddDigitalOutputChannel("rbOPShutter", digitalPatternBoardAddress, 3, 7);
AddDigitalOutputChannel("dipoleTrapAOM", digitalPatternBoardAddress, 3, 3);
// tweezer new digital pattern board
AddDigitalOutputChannel("test00", digitalPatternBoardAddress2, 0, 0);
// Analog Pattern
AddAnalogOutputChannel("slowingChirp", analogPatternBoardAddress + "/ao8");
AddAnalogOutputChannel("v00Intensity", analogPatternBoardAddress + "/ao9");
AddAnalogOutputChannel("v00EOMAmp", analogPatternBoardAddress + "/ao11");
AddAnalogOutputChannel("v00Frequency", analogPatternBoardAddress + "/ao12");
AddAnalogOutputChannel("MOTCoilsCurrent", analogPatternBoardAddress + "/ao13"); //13
//AddAnalogOutputChannel("triggerDelay", analogPatternBoardAddress + "/ao15");
AddAnalogOutputChannel("xShimCoilCurrent", analogPatternBoardAddress + "/ao17");
AddAnalogOutputChannel("yShimCoilCurrent", analogPatternBoardAddress + "/ao16");
AddAnalogOutputChannel("zShimCoilCurrent", analogPatternBoardAddress + "/ao21");
AddAnalogOutputChannel("slowingCoilsCurrent", analogPatternBoardAddress + "/ao18");
AddAnalogOutputChannel("v00Chirp", analogPatternBoardAddress + "/ao22");
AddAnalogOutputChannel("topCoilShunt", analogPatternBoardAddress + "/ao26");
// Old Rb Analog Pattern
AddAnalogOutputChannel("rbCoolingIntensity", analogPatternBoardAddress + "/ao23"); // from old setup
AddAnalogOutputChannel("rbCoolingFrequency", analogPatternBoardAddress + "/ao24"); // TTL in?
// New Rb
AddAnalogOutputChannel("rb3DCoolingFrequency", analogPatternBoardAddress + "/ao1");
AddAnalogOutputChannel("rbRepumpFrequency", analogPatternBoardAddress + "/ao3");
AddAnalogOutputChannel("rbAbsImagingFrequency", analogPatternBoardAddress + "/ao4");
AddAnalogOutputChannel("rb3DCoolingAttenuation", analogPatternBoardAddress + "/ao0");
AddAnalogOutputChannel("rbRepumpAttenuation", analogPatternBoardAddress + "/ao5");
AddAnalogOutputChannel("rbOffsetLock", analogPatternBoardAddress + "/ao15");
// Transfer coil
AddAnalogOutputChannel("transferCoils", analogPatternBoardAddress + "/ao6");
AddAnalogOutputChannel("transferCoilsShunt1", analogPatternBoardAddress + "/ao7");
AddAnalogOutputChannel("transferCoilsShunt2", analogPatternBoardAddress + "/ao27");
// Tweezer MOT coils
AddAnalogOutputChannel("speedbumpCoils", analogPatternBoardAddress + "/ao20");
AddAnalogOutputChannel("DipoleTrapLaserControl", analogPatternBoardAddress + "/ao29");
AddAnalogOutputChannel("TweezerMOTCoils", analogPatternBoardAddress + "/ao28");
// Source
AddDigitalOutputChannel("cryoCooler", usbBoard2Address, 0, 0);
AddDigitalOutputChannel("sourceHeater", usbBoard2Address, 0, 1);
AddAnalogInputChannel("sourceTemp", usbBoard2Address + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("sf6Temp", tclBoard2Address + "/ai0", AITerminalConfiguration.Rse);
// TCL Config
//TCLConfig tcl1 = new TCLConfig("Hamish");
//tcl1.AddLaser("v00Lock", "v00PD");
//tcl1.AddLaser("v10Lock", "v10PD");
//tcl1.AddLaser("bXLock", "bXPD");
//tcl1.Trigger = tclBoard1Address + "/PFI0";
//tcl1.Cavity = "rampHamish";
//tcl1.MasterLaser = "refPDHamish";
//tcl1.Ramp = "cavityLockHamish";
//tcl1.TCPChannel = 1190;
//tcl1.AddDefaultGain("Master", 1.0);
//tcl1.AddDefaultGain("v00Lock", 2);
//tcl1.AddDefaultGain("v10Lock", 0.5);
//tcl1.AddDefaultGain("bXLock", -2);
//tcl1.AddFSRCalibration("v00Lock", 3.95); //This is an approximate guess
//tcl1.AddFSRCalibration("v10Lock", 4.15);
//tcl1.AddFSRCalibration("bXLock", 3.9);
//tcl1.DefaultScanPoints = 850;
//tcl1.PointsToConsiderEitherSideOfPeakInFWHMs = 3;
//Info.Add("Hamish", tcl1);
//TCLConfig tcl2 = new TCLConfig("Carlos");
//tcl2.AddLaser("v21Lock", "v21PD");
//tcl2.AddLaser("v32Lock", "v32PD");
//tcl2.Trigger = tclBoard2Address + "/PFI0";
//tcl2.Cavity = "rampCarlos";
//tcl2.MasterLaser = "refPDCarlos";
//tcl2.Ramp = "cavityLockCarlos";
//tcl2.TCPChannel = 1191;
//tcl2.AddDefaultGain("Master", 1.0);
//tcl2.AddDefaultGain("v21Lock", -0.4);
//tcl2.AddDefaultGain("v32Lock", 0.2);
//tcl2.AddFSRCalibration("v21Lock", 3.7); //This is an approximate guess
//tcl2.AddFSRCalibration("v32Lock", 3.7);
//tcl2.DefaultScanPoints = 900;
//tcl2.PointsToConsiderEitherSideOfPeakInFWHMs = 3;
//Info.Add("Carlos", tcl2);
TCLConfig tclConfig = new TCLConfig("Hamish & Carlos");
tclConfig.Trigger = tclBoard1Address + "/PFI0";
tclConfig.BaseRamp = "ramp";
tclConfig.TCPChannel = 1190;
tclConfig.DefaultScanPoints = 1000;
tclConfig.PointsToConsiderEitherSideOfPeakInFWHMs = 4;
tclConfig.AnalogSampleRate = 62000;
string hamish = "Hamish";
string carlos = "Carlos";
tclConfig.AddCavity(hamish);
tclConfig.Cavities[hamish].AddSlaveLaser("v00Lock", "v00PD");
tclConfig.Cavities[hamish].AddLockBlocker("v00Lock", "v00LockBlockFlag");
tclConfig.Cavities[hamish].AddSlaveLaser("v10Lock", "v10PD");
tclConfig.Cavities[hamish].AddSlaveLaser("bXLock", "bXPD");
tclConfig.Cavities[hamish].AddLockBlocker("bXLock", "bXLockBlockFlag");
tclConfig.Cavities[hamish].MasterLaser = "refPDHamish";
tclConfig.Cavities[hamish].RampOffset = "cavityLockHamish";
tclConfig.Cavities[hamish].AddDefaultGain("Master", 1.0);
tclConfig.Cavities[hamish].AddDefaultGain("v00Lock", 2);
tclConfig.Cavities[hamish].AddDefaultGain("v10Lock", 0.5);
tclConfig.Cavities[hamish].AddDefaultGain("bXLock", -2);
tclConfig.Cavities[hamish].AddFSRCalibration("v00Lock", 3.95); //This is an approximate guess
tclConfig.Cavities[hamish].AddFSRCalibration("v10Lock", 4.15);
tclConfig.Cavities[hamish].AddFSRCalibration("bXLock", 3.9);
tclConfig.AddCavity(carlos);
tclConfig.Cavities[carlos].AddSlaveLaser("v21Lock", "v21PD");
tclConfig.Cavities[carlos].AddSlaveLaser("v32Lock", "v32PD");
tclConfig.Cavities[carlos].MasterLaser = "refPDCarlos";
tclConfig.Cavities[carlos].RampOffset = "cavityLockCarlos";
tclConfig.Cavities[carlos].AddDefaultGain("Master", 1.0);
tclConfig.Cavities[carlos].AddDefaultGain("v21Lock", -0.2);
tclConfig.Cavities[carlos].AddDefaultGain("v32Lock", 1.0);
tclConfig.Cavities[carlos].AddFSRCalibration("v21Lock", 3.7); //This is an approximate guess
tclConfig.Cavities[carlos].AddFSRCalibration("v32Lock", 3.7);
Info.Add("TCLConfig", tclConfig);
// MOTMaster configuration
MMConfig mmConfig = new MMConfig(false, false, true, false);
mmConfig.ExternalFilePattern = "*.tif";
Info.Add("MotMasterConfiguration", mmConfig);
Info.Add("AOPatternTrigger", analogPatternBoardAddress + "/PFI4"); //PFI6
Info.Add("PatternGeneratorBoard", digitalPatternBoardAddress);
Info.Add("PGType", "dedicated");
Info.Add("Element", "CaF");
//Info.Add("PGTrigger", Boards["pg"] + "/PFI2"); // trigger from "cryocooler sync" box, delay controlled from "triggerDelay" analog output
// ScanMaster configuration
//Info.Add("defaultTOFRange", new double[] { 4000, 12000 }); // these entries are the two ends of the range for the upper TOF graph
//Info.Add("defaultTOF2Range", new double[] { 0, 1000 }); // these entries are the two ends of the range for the middle TOF graph
//Info.Add("defaultGate", new double[] { 6000, 2000 }); // the first entry is the centre of the gate, the second is the half width of the gate (upper TOF graph)
// Instruments
Instruments.Add("windfreak", new WindfreakSynth("ASRL8::INSTR"));
Instruments.Add("gigatronics 1", new Gigatronics7100Synth("GPIB0::19::INSTR"));
Instruments.Add("gigatronics 2", new Gigatronics7100Synth("GPIB0::6::INSTR"));
// Calibrations
//AddCalibration("freqToVoltage", new PolynomialCalibration(new double[] { -9.7727, 0.16604, -0.0000272 }, 70, 130)); //this is a quadratic fit to the manufacturer's data for a POS-150
//AddCalibration("motAOMAmp", new PolynomialCalibration(new double[] {6.2871, -0.5907, -0.0706, -0.0088, -0.0004}, -12, 4)); // this is a polynomial fit (up to quartic) to measured behaviour
}
public AddInstrumentQuandlViewModel(IDataClient client, IDialogCoordinator dialogCoordinator, string authToken)
{
_client = client;
_dialogCoordinator = dialogCoordinator;
//Create commands
Load = ReactiveCommand.CreateFromTask(async _ =>
{
var dsResult = await _client.GetDatasources().ConfigureAwait(true);
if (dsResult.WasSuccessful)
{
_thisDS = dsResult.Result.FirstOrDefault(x => x.Name == "Quandl");
}
else
{
_logger.Error("Could not find FRED datasource");
}
});
var canSearch = this.WhenAnyValue(x => x.Symbol).Select(x => !string.IsNullOrEmpty(x));
Search = ReactiveCommand.CreateFromTask(async _ =>
{
Status = "Searching...";
Instruments.Clear();
QuandlUtils.QuandlInstrumentSearchResult foundInstruments;
try
{
foundInstruments = await QuandlUtils.FindInstruments(Symbol, authToken, CurrentPage ?? 1).ConfigureAwait(true);
}
catch (Exception ex)
{
await _dialogCoordinator.ShowMessageAsync(this, "Error", ex.Message).ConfigureAwait(true);
return;
}
foreach (var i in foundInstruments.Instruments)
{
i.Datasource = _thisDS;
i.DatasourceID = _thisDS.ID;
i.Multiplier = 1;
Instruments.Add(i);
}
Status = foundInstruments.Count + " contracts found";
CurrentPage = CurrentPage ?? 1;
}, canSearch);
Add = ReactiveCommand.CreateFromTask <IList>(async selectedInstruments =>
{
int count = 0;
foreach (Instrument instrument in selectedInstruments)
{
instrument.Datasource = _thisDS;
instrument.DatasourceID = _thisDS.ID;
var result = await _client.AddInstrument(instrument).ConfigureAwait(true);
if (await result.DisplayErrors(this, _dialogCoordinator).ConfigureAwait(true))
{
continue;
}
count++;
AddedInstruments.Add(result.Result);
}
Status = string.Format("{0}/{1} instruments added.", count, selectedInstruments.Count);
});
this.WhenAny(x => x.CurrentPage, x => x)
.Select(x => new Unit()) //hack
.InvokeCommand(Search);
IncrementPage = ReactiveCommand.Create(() => CurrentPage == null ? 1 : CurrentPage++);
DecrementPage = ReactiveCommand.Create(() => Math.Max(1, CurrentPage == null ? 1 : (int)CurrentPage--));
}
public override void Refresh()
{
//tags
var selectedTags = Tags
.Where(x => x.IsChecked)
.Select(x => x.Item)
.ToList();
Tags.Clear();
foreach (var checkItem in Context
.Tags
.OrderBy(x => x.Name)
.ToList()
.Select(x => new CheckListItem <Tag>(x, selectedTags.Contains(x))))
{
Tags.Add(checkItem);
}
//strategies
var selectedStrats = Strategies
.Where(x => x.IsChecked)
.Select(x => x.Item)
.ToList();
Strategies.Clear();
foreach (var checkItem in Context
.Strategies
.OrderBy(x => x.Name)
.ToList()
.Select(x => new CheckListItem <Strategy>(x, selectedStrats.Contains(x))))
{
Strategies.Add(checkItem);
}
//Instruments
if (Instruments.Count == 0)
{
//on first load we want all instruments selected, otherwise remember previous selection
foreach (var checkItem in Context
.Instruments
.OrderBy(x => x.Symbol)
.ToList()
.Select(x => new CheckListItem <Instrument>(x, true)))
{
Instruments.Add(checkItem);
}
}
else
{
var selectedInstruments = Instruments
.Where(x => x.IsChecked)
.Select(x => x.Item)
.ToList();
Instruments.Clear();
foreach (var checkItem in Context
.Instruments
.OrderBy(x => x.Symbol)
.ToList()
.Select(x => new CheckListItem <Instrument>(x, selectedInstruments.Contains(x))))
{
Instruments.Add(checkItem);
}
}
//benchmarks
Benchmarks.Clear();
foreach (Benchmark b in Context.Benchmarks.OrderBy(x => x.Name))
{
Benchmarks.Add(b);
}
//backtest results from the external data source
BacktestSeries.Clear();
if (Datasourcer.ExternalDataSource.Connected)
{
BacktestSeries.AddRange(
Datasourcer
.ExternalDataSource
.GetBacktestSeries());
}
}
public AddInstrumentBinanceViewModel(IDataClient client, IDialogCoordinator dialogCoordinator)
{
_client = client;
_dialogCoordinator = dialogCoordinator;
//Create commands
Load = ReactiveCommand.CreateFromTask(async _ =>
{
//load datasource
var dsResult = await _client.GetDatasources().ConfigureAwait(true);
if (dsResult.WasSuccessful)
{
_thisDS = dsResult.Result.FirstOrDefault(x => x.Name == "Binance");
}
else
{
_logger.Error("Could not find Binance datasource");
return;
}
//load instruments
try
{
var instruments = await BinanceUtils.GetInstruments(_thisDS);
foreach (var inst in instruments)
{
Instruments.Add(inst);
_allInstruments.Add(inst);
}
}
catch (Exception ex)
{
_logger.Error(ex, "Could not load symbols from binance");
}
});
Search = ReactiveCommand.Create(() =>
{
Instruments.Clear();
foreach (var i in _allInstruments.Where(x => string.IsNullOrEmpty(Symbol) || //case-insensitive Contains()
x.Symbol.IndexOf(Symbol, StringComparison.OrdinalIgnoreCase) >= 0))
{
Instruments.Add(i);
}
});
Add = ReactiveCommand.CreateFromTask <IList>(async selectedInstruments =>
{
int count = 0;
foreach (Instrument instrument in selectedInstruments)
{
instrument.Datasource = _thisDS;
instrument.DatasourceID = _thisDS.ID;
var result = await _client.AddInstrument(instrument).ConfigureAwait(true);
if (await result.DisplayErrors(this, _dialogCoordinator).ConfigureAwait(true))
{
continue;
}
count++;
AddedInstruments.Add(result.Result);
}
Status = string.Format("{0}/{1} instruments added.", count, selectedInstruments.Count);
});
this.WhenAny(x => x.Symbol, x => x)
.Select(x => new Unit()) //hack
.InvokeCommand(Search);
}
public DecelerationHardware()
{
// YAG laser
yag = new MiniliteLaser();
// add the boards
Boards.Add("daq", "/dev2");
Boards.Add("multiDAQ", "/dev1");
Boards.Add("pg", "/dev1");
Boards.Add("aoBoard", "/PXI1Slot5");
Boards.Add("usbDev", "/dev4");
//Boards.Add("PXI6", "/PXI1Slot6_4");
Boards.Add("PXI6", "/PXI1Slot6");
Boards.Add("PXI4", "/PXI1Slot4");
Boards.Add("PXI5", "/PXI1Slot5");
string pgBoard = (string)Boards["pg"];
string usbBoard = (string)Boards["usbDev"];
string daqBoard = (string)Boards["daq"];
string PXIBoard = (string)Boards["PXI6"];
string TCLBoard = (string)Boards["PXI4"];
string TCLBoard2 = (string)Boards["PXI6"];
string aoBoard = (string)Boards["aoBoard"];
//configure instance 1 of transfer cavity lock
TCLConfig tcl1 = new TCLConfig("Hamish McCavity");
tcl1.AddLaser("v00cooling", "p1");
tcl1.AddLaser("v10repump", "p2");
tcl1.AddLaser("eylsa", "p3");
tcl1.Trigger = TCLBoard + "/PFI0";
tcl1.Cavity = "cavity";
tcl1.MasterLaser = "master";
tcl1.Ramp = "rampfb";
tcl1.TCPChannel = 1190;
Info.Add("Hamish", tcl1);
//configure instance 2 of transfer cavity lock
TCLConfig tcl2 = new TCLConfig("Carlos the Cavity");
tcl2.AddLaser("v21repump", "p12");
tcl2.AddLaser("v32repump", "p22");
tcl2.Trigger = TCLBoard2 + "/PFI0";
tcl2.Cavity = "cavity2";
tcl2.MasterLaser = "master2";
tcl2.Ramp = "rampfb2";
tcl2.TCPChannel = 1191;
Info.Add("Carlos", tcl2);
//MotMaster configuration
MMConfig mmConfig = new MMConfig(false, false, false, false);
mmConfig.ExternalFilePattern = "*.tif";
Info.Add("MotMasterConfiguration", mmConfig);
Instruments.Add("synth", new HP8673BSynth("GPIB0::19::INSTR"));
//Instruments.Add("counter", new HP5350BCounter("GPIB0::14::INSTR"));
//Instruments.Add("flowmeter", new FlowMeter("ASRL1::INSTR"));
//VCO lock
//AddAnalogOutputChannel("VCO_Out", PXIBoard + "/ao12", 0.0, 10.0);
// add things to the info
Info.Add("PGTrigger", Boards["pg"] + "/PFI2"); // trigger from "cryocooler sync" box, delay controlled from "triggerDelay" analog output
//Info.Add("PGClockLine", Boards["pg"] + "/PFI2");
Info.Add("PatternGeneratorBoard", pgBoard);
Info.Add("PGType", "dedicated");
Info.Add("AOPatternTrigger", aoBoard + "/PFI0");
Info.Add("defaultTOFRange", new double[] { 4000, 12000 }); // these entries are the two ends of the range for the upper TOF graph
Info.Add("defaultTOF2Range", new double[] { 0, 1000 }); // these entries are the two ends of the range for the middle TOF graph
Info.Add("defaultGate", new double[] { 6000, 2000 }); // the first entry is the centre of the gate, the second is the half width of the gate (upper TOF graph)
// the analog triggers
Info.Add("analogTrigger0", (string)Boards["daq"] + "/PFI0"); // pin 11
Info.Add("analogTrigger1", (string)Boards["daq"] + "/PFI1"); // pin 10
//Info.Add("TCLTrigger", (string)Boards["PXI4"] + "/PFI0");
//Info.Add("analogTrigger2", (string)Boards["usbDev"] + "/PFI0"); //Pin 29
Info.Add("analogTrigger3", (string)Boards["daq"] + "/PFI6"); //Pin 5 - breakout 31
Info.Add("usbAnalogTrigger", usbBoard + "/PFI0");
//distance information
Info.Add("sourceToDetect", 0.535); //in m
Info.Add("sourceToSoftwareDecelerator", 0.12); //in m
//information about the molecule
Info.Add("molecule", "caf");
Info.Add("Element", "CaF");
Info.Add("moleculeMass", 58.961); // this is 40CaF in atomic mass units
Info.Add("moleculeRotationalConstant", 1.02675E10); //in Hz
Info.Add("moleculeDipoleMoment", 15400.0); //in Hz/(V/m)
//information about the decelerator
//These settings for WF
Info.Add("deceleratorStructure", DecelerationConfig.DecelerationExperiment.SwitchStructure.V_H); //Vertical first
Info.Add("deceleratorLensSpacing", 0.006);
Info.Add("deceleratorFieldMap", "RodLayout3_EonAxis.dat");
Info.Add("mapPoints", 121);
Info.Add("mapStartPoint", 0.0);
Info.Add("mapResolution", 0.0001);
// These settings for AG
// Info.Add("deceleratorStructure", DecelerationConfig.DecelerationExperiment.SwitchStructure.H_V); //Horizontal first
// Info.Add("deceleratorLensSpacing", 0.024);
// Info.Add("deceleratorFieldMap", "Section1v1_onAxisFieldTemplate.dat");
// Info.Add("mapPoints", 481);
// Info.Add("mapStartPoint", 0.0);
// Info.Add("mapResolution", 0.0001);
//Here are constants for 174YbF for future reference
//Info.Add("molecule", "ybf");
//Info.Add("moleculeMass", 192.937); // this is 174YbF in atomic mass units
//Info.Add("moleculeRotationalConstant", 7.2338E9); //in Hz
//Info.Add("moleculeDipoleMoment", 19700.0); //in Hz/(V/m)
// map the digital channels
AddDigitalOutputChannel("valve", pgBoard, 0, 6);
AddDigitalOutputChannel("tclBlock", pgBoard, 0, 6); //Same as valve; deliberately!
AddDigitalOutputChannel("flash", pgBoard, 0, 0); //Changed from pg board P.0.5 because that appears to have died mysteriously (line dead in ribbon cable?) TEW 06/04/09
AddDigitalOutputChannel("q", pgBoard, 0, 2);
AddDigitalOutputChannel("chirpTrigger", pgBoard, 1, 0);
AddDigitalOutputChannel("detector", pgBoard, 3, 7);
AddDigitalOutputChannel("detectorprime", pgBoard, 3, 6);
AddDigitalOutputChannel("aom", pgBoard, 2, 1); //Same channel as "ttl2" as used by the AomLevelControlPlugin. Now commented out.
AddDigitalOutputChannel("aom2", pgBoard, 1, 6); // Pin 21 of PG board. Output 31 of front panel
AddDigitalOutputChannel("v00Shutter", pgBoard, 2, 2);
//AddDigitalOutputChannel("digitalSwitchChannel", pgBoard, 2, 2);
AddDigitalOutputChannel("v00AOM", pgBoard, 1, 1); //Pin 17
AddDigitalOutputChannel("shimCoilSwitch", pgBoard, 1, 2); //Pin 51
AddDigitalOutputChannel("bXShutter", pgBoard, 1, 3); //Pin 52
AddDigitalOutputChannel("cameraTrigger", pgBoard, 0, 4); // Pin 13
AddDigitalOutputChannel("AnalogPatternTrigger", pgBoard, 3, 3); //Pin 31
// map the analog channels
AddAnalogInputChannel("pmt", daqBoard + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("pmt2", daqBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("refcavity", daqBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("lockcavity", daqBoard + "/ai2", AITerminalConfiguration.Rse);
AddAnalogInputChannel("master", TCLBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("cavity", TCLBoard + "/ai15", AITerminalConfiguration.Rse);
AddAnalogInputChannel("p1", TCLBoard + "/ai3", AITerminalConfiguration.Rse);
AddAnalogInputChannel("p2", TCLBoard + "/ai10", AITerminalConfiguration.Rse);
AddAnalogInputChannel("p3", TCLBoard + "/ai4", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("v10repump", TCLBoard + "/ao0");
AddAnalogOutputChannel("rampfb", TCLBoard + "/ao1");
AddAnalogOutputChannel("v00cooling", TCLBoard2 + "/ao2");
AddAnalogOutputChannel("eylsa", TCLBoard2 + "/ao3");
AddAnalogOutputChannel("slowingChirp", aoBoard + "/ao8");
AddAnalogOutputChannel("v00Intensity", aoBoard + "/ao9");
AddAnalogOutputChannel("v00Frequency", aoBoard + "/ao12");
AddAnalogOutputChannel("MOTCoilsCurrent", aoBoard + "/ao13");
AddAnalogOutputChannel("xShimCoilCurrent", aoBoard + "/ao17");
AddAnalogOutputChannel("yShimCoilCurrent", aoBoard + "/ao16");
AddAnalogOutputChannel("zShimCoilCurrent", aoBoard + "/ao14");
AddAnalogOutputChannel("slowingCoilsCurrent", aoBoard + "/ao18");
//second cavity
AddAnalogInputChannel("master2", TCLBoard2 + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("cavity2", TCLBoard2 + "/ai4", AITerminalConfiguration.Rse);
AddAnalogInputChannel("p12", TCLBoard2 + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("p22", TCLBoard2 + "/ai2", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("v21repump", TCLBoard2 + "/ao0");
AddAnalogOutputChannel("v32repump", usbBoard + "/ao0", 0, 5);
AddAnalogOutputChannel("rampfb2", TCLBoard2 + "/ao1");
// map the counter channels
AddCounterChannel("pmt", daqBoard + "/ctr0");
AddCounterChannel("sample clock", daqBoard + "/ctr1");
//map the monitoring source chamber in deceleration hardware
// AddAnalogInputChannel("RoughVacuum", PXIBoard + "/ai0", AITerminalConfiguration.Rse);
// AddAnalogInputChannel("PressureSourceChamber", PXIBoard + "/ai1", AITerminalConfiguration.Rse);
// AddAnalogInputChannel("VoltageReference", PXIBoard + "/ai2", AITerminalConfiguration.Rse);
// AddAnalogInputChannel("10KThermistor30KPlate", PXIBoard + "/ai3", AITerminalConfiguration.Rse);
// AddAnalogInputChannel("30KShield", PXIBoard + "/ai4", AITerminalConfiguration.Rse);
// AddAnalogInputChannel("4KCell", PXIBoard + "/ai5", AITerminalConfiguration.Rse);
//map the channels to monitor the sidebands in deceleration hardware
AddAnalogInputChannel("cavityVoltage", usbBoard + "/ai0", AITerminalConfiguration.Rse);
AddAnalogInputChannel("mot606", usbBoard + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("mot628V1", usbBoard + "/ai2", AITerminalConfiguration.Rse);
AddAnalogInputChannel("mot628V2", usbBoard + "/ai3", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("mot628V3", usbBoard + "/ai4", AITerminalConfiguration.Rse);
AddAnalogInputChannel("slowing531", usbBoard + "/ai4", AITerminalConfiguration.Rse);
AddAnalogInputChannel("slowing628V1", usbBoard + "/ai7", AITerminalConfiguration.Rse);
//analog output channels controlled by the hardware controller and/or MOTMaster
AddAnalogOutputChannel("motAOMFreq", aoBoard + "/ao10");
AddAnalogOutputChannel("v00EOMAmp", aoBoard + "/ao11");
AddAnalogOutputChannel("triggerDelay", aoBoard + "/ao15");
// AddCalibration("freqToVoltage", new PolynomialCalibration(new double[] { -9.7727, 0.16604, -0.0000272 }, 70, 130)); //this is a quadratic fit to the manufacturer's data for a POS-150
//AddCalibration("motAOMAmp", new PolynomialCalibration(new double[] {6.2871, -0.5907, -0.0706, -0.0088, -0.0004}, -12, 4)); // this is a polynomial fit (up to quartic) to measured behaviour
}
public PXIEDMHardware()
{
// add the boards
Boards.Add("rfPulseGenerator", "PXI1Slot4");
Boards.Add("daq", "/PXI1Slot18");
Boards.Add("pg", "/PXI1Slot10");
Boards.Add("counter", "/PXI1Slot16");
Boards.Add("aoBoard", "/PXI1Slot2");
// this drives the rf attenuators
Boards.Add("usbDAQ1", "/Dev6");
Boards.Add("analogIn", "/PXI1Slot15");
Boards.Add("usbDAQ2", "/Dev1");
Boards.Add("usbDAQ3", "/Dev2");
Boards.Add("usbDAQ4", "/Dev5");
Boards.Add("tclBoardPump", "/PXI1Slot17");
Boards.Add("tclBoardProbe", "/PXI1Slot9");
string rfPulseGenerator = (string)Boards["rfPulseGenerator"];
string pgBoard = (string)Boards["pg"];
string daqBoard = (string)Boards["daq"];
string counterBoard = (string)Boards["counter"];
string aoBoard = (string)Boards["aoBoard"];
string usbDAQ1 = (string)Boards["usbDAQ1"];
string analogIn = (string)Boards["analogIn"];
string usbDAQ2 = (string)Boards["usbDAQ2"];
string usbDAQ3 = (string)Boards["usbDAQ3"];
string usbDAQ4 = (string)Boards["usbDAQ4"];
string tclBoardPump = (string)Boards["tclBoardPump"];
string tclBoardProbe = (string)Boards["tclBoardProbe"];
// add things to the info
// the analog triggersf
Info.Add("analogTrigger0", (string)Boards["analogIn"] + "/PFI0");
Info.Add("analogTrigger1", (string)Boards["analogIn"] + "/PFI1");
Info.Add("sourceToDetect", 1.3);
Info.Add("moleculeMass", 193.0);
Info.Add("machineLengthRatio", 3.842);
Info.Add("defaultGate", new double[] { 2190, 80 });
Info.Add("phaseLockControlMethod", "synth");
Info.Add("PGClockLine", pgBoard + "/PFI4"); //Mapped to PFI2 on 6533 connector
Info.Add("PatternGeneratorBoard", pgBoard);
Info.Add("PGType", "dedicated");
// rf counter switch control seq``
Info.Add("IodineFreqMon", new bool[] { false, false }); // IN 1
Info.Add("pumpAOMFreqMon", new bool[] { false, true }); // IN 2
Info.Add("FLModulationFreqMon", new bool[] { true, false }); // IN 3
Info.Add("PGTrigger", pgBoard + "/PFI5"); //Mapped to PFI7 on 6533 connector
// YAG laser
yag = new BrilliantLaser("ASRL21::INSTR");
// add the GPIB/RS232 instruments
Instruments.Add("green", new HP8657ASynth("GPIB0::7::INSTR"));
Instruments.Add("gigatronix", new Gigatronics7100Synth("GPIB0::19::INSTR"));
Instruments.Add("red", new HP3325BSynth("GPIB0::12::INSTR"));
Instruments.Add("4861", new ICS4861A("GPIB0::4::INSTR"));
Instruments.Add("bCurrentMeter", new HP34401A("GPIB0::22::INSTR"));
Instruments.Add("rfCounter", new Agilent53131A("GPIB0::3::INSTR"));
//Instruments.Add("rfCounter2", new Agilent53131A("GPIB0::5::INSTR"));
Instruments.Add("rfPower", new HP438A("GPIB0::13::INSTR"));
Instruments.Add("BfieldController", new SerialDAQ("ASRL19::INSTR"));
Instruments.Add("rfCounter2", new SerialAgilent53131A("ASRL17::INSTR"));
Instruments.Add("probePolControl", new SerialMotorControllerBCD("ASRL8::INSTR"));
Instruments.Add("pumpPolControl", new SerialMotorControllerBCD("ASRL11::INSTR"));
// map the digital channels
// these channels are generally switched by the pattern generator
// they're all in the lower half of the pg
AddDigitalOutputChannel("valve", pgBoard, 0, 0);
AddDigitalOutputChannel("flash", pgBoard, 0, 1);
AddDigitalOutputChannel("q", pgBoard, 0, 2);
AddDigitalOutputChannel("detector", pgBoard, 0, 3);
AddDigitalOutputChannel("detectorprime", pgBoard, 1, 2); // this trigger is for switch scanning
// see ModulatedAnalogShotGatherer.cs
// for details.
AddDigitalOutputChannel("rfSwitch", pgBoard, 0, 4);
AddDigitalOutputChannel("pumprfSwitch", pgBoard, 3, 4);
AddDigitalOutputChannel("fmSelect", pgBoard, 1, 0); // This line selects which fm voltage is
// sent to the synth.
AddDigitalOutputChannel("attenuatorSelect", pgBoard, 0, 5); // This line selects the attenuator voltage
// sent to the voltage-controlled attenuator.
AddDigitalOutputChannel("piFlip", pgBoard, 1, 1);
AddDigitalOutputChannel("ttlSwitch", pgBoard, 1, 3); // This is the output that the pg
// will switch if it's switch scanning.
AddDigitalOutputChannel("scramblerEnable", pgBoard, 1, 4);
//RF Counter Control (single pole 4 throw)
//AddDigitalOutputChannel("rfCountSwBit1", pgBoard, 3, 5);
//AddDigitalOutputChannel("rfCountSwBit2", pgBoard, 3, 6);
// new rf amp blanking
AddDigitalOutputChannel("rfAmpBlanking", pgBoard, 1, 5);
// these channel are usually software switched - they should not be in
// the lower half of the pattern generator
AddDigitalOutputChannel("b", pgBoard, 2, 0);
AddDigitalOutputChannel("notB", pgBoard, 2, 1);
AddDigitalOutputChannel("db", pgBoard, 2, 2);
AddDigitalOutputChannel("notDB", pgBoard, 2, 3);
// AddDigitalOutputChannel("notEOnOff", pgBoard, 2, 4); // this line seems to be broken on our pg board
// AddDigitalOutputChannel("eOnOff", pgBoard, 2, 5); // this and the above are not used now we have analog E control
AddDigitalOutputChannel("ePol", pgBoard, 2, 6);
AddDigitalOutputChannel("notEPol", pgBoard, 2, 7);
AddDigitalOutputChannel("eBleed", pgBoard, 3, 0);
AddDigitalOutputChannel("eSwitching", aoBoard, 0, 3);
AddDigitalOutputChannel("piFlipEnable", pgBoard, 3, 1);
AddDigitalOutputChannel("notPIFlipEnable", pgBoard, 3, 5);
AddDigitalOutputChannel("mwEnable", pgBoard, 3, 3);
AddDigitalOutputChannel("mwSelectPumpChannel", pgBoard, 3, 6);
AddDigitalOutputChannel("mwSelectTopProbeChannel", pgBoard, 3, 2);
AddDigitalOutputChannel("mwSelectBottomProbeChannel", pgBoard, 2, 4);
// these digitial outputs are are not switched during the pattern
AddDigitalOutputChannel("argonShutter", aoBoard, 0, 0);
AddDigitalOutputChannel("patternTTL", aoBoard, 0, 7);
AddDigitalOutputChannel("rfPowerAndFreqSelectSwitch", aoBoard, 0, 1);
AddDigitalOutputChannel("targetStepper", aoBoard, 0, 2);;
// map the analog channels
// These channels are on the daq board. Used mainly for diagnostic purposes.
AddAnalogInputChannel("iodine", daqBoard + "/ai2", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("cavity", daqBoard + "/ai3", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("probePD", daqBoard + "/ai4", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("pumpPD", daqBoard + "/ai5", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("northLeakage", daqBoard + "/ai6", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("southLeakage", daqBoard + "/ai7", AITerminalConfiguration.Nrse);
//AddAnalogInputChannel("northLeakage", usbDAQ4 + "/ai0", AITerminalConfiguration.Rse);
//AddAnalogInputChannel("southLeakage", usbDAQ4 + "/ai1", AITerminalConfiguration.Rse);
// Used ai13,11 & 12 over 6,7 & 8 for miniFluxgates, because ai8, 9 have an isolated ground.
AddAnalogInputChannel("miniFlux1", daqBoard + "/ai13", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("miniFlux2", daqBoard + "/ai11", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("miniFlux3", daqBoard + "/ai12", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("ground", daqBoard + "/ai14", AITerminalConfiguration.Nrse);
AddAnalogInputChannel("piMonitor", daqBoard + "/ai10", AITerminalConfiguration.Nrse);
//AddAnalogInputChannel("diodeLaserRefCavity", daqBoard + "/ai13", AITerminalConfiguration.Nrse);
// Don't use ai10, cross talk with other channels on this line
// high quality analog inputs (will be) on the S-series analog in board
// The last number in AddAnalogInputChannel is an optional calibration which turns VuS and MHz
AddAnalogInputChannel("topProbe", analogIn + "/ai0", AITerminalConfiguration.Differential, 0.1);
AddAnalogInputChannel("bottomProbe", analogIn + "/ai1", AITerminalConfiguration.Differential, 0.02);
AddAnalogInputChannel("magnetometer", analogIn + "/ai2", AITerminalConfiguration.Differential);
AddAnalogInputChannel("gnd", analogIn + "/ai3", AITerminalConfiguration.Differential);
AddAnalogInputChannel("battery", analogIn + "/ai4", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("piMonitor", analogIn + "/ai5", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("bFieldCurrentMonitor", analogIn + "/ai6", AITerminalConfiguration.Differential);
AddAnalogInputChannel("reflectedrf1Amplitude", analogIn + "/ai5", AITerminalConfiguration.Differential);
AddAnalogInputChannel("reflectedrf2Amplitude", analogIn + "/ai6", AITerminalConfiguration.Differential);
AddAnalogInputChannel("rfCurrent", analogIn + "/ai7 ", AITerminalConfiguration.Differential);
AddAnalogOutputChannel("phaseScramblerVoltage", aoBoard + "/ao10");
AddAnalogOutputChannel("b", aoBoard + "/ao2");
// rf rack control
//AddAnalogInputChannel("rfPower", usbDAQ1 + "/ai0", AITerminalConfiguration.Rse);
AddAnalogOutputChannel("rf1Attenuator", usbDAQ1 + "/ao0", 0, 5);
AddAnalogOutputChannel("rf2Attenuator", usbDAQ1 + "/ao1", 0, 5);
AddAnalogOutputChannel("rf1FM", usbDAQ2 + "/ao0", 0, 5);
AddAnalogOutputChannel("rf2FM", usbDAQ2 + "/ao1", 0, 5);
// E field control and monitoring
//AddAnalogInputChannel("cPlusMonitor", usbDAQ3 + "/ai1", AITerminalConfiguration.Differential);
//AddAnalogInputChannel("cMinusMonitor", usbDAQ3 + "/ai2", AITerminalConfiguration.Differential);
AddAnalogInputChannel("cPlusMonitor", daqBoard + "/ai0", AITerminalConfiguration.Differential);
AddAnalogInputChannel("cMinusMonitor", daqBoard + "/ai1", AITerminalConfiguration.Differential);
AddAnalogOutputChannel("cPlus", usbDAQ3 + "/ao0", 0, 10);
AddAnalogOutputChannel("cMinus", usbDAQ3 + "/ao1", 0, 10);
// B field control
//AddAnalogOutputChannel("steppingBBias", usbDAQ4 + "/ao0", 0, 5);
// map the counter channels
AddCounterChannel("phaseLockOscillator", counterBoard + "/ctr7");
AddCounterChannel("phaseLockReference", counterBoard + "/pfi10");
//AddCounterChannel("northLeakage", counterBoard + "/ctr0");
//AddCounterChannel("southLeakage", counterBoard + "/ctr1");
// Cavity inputs for the cavity that controls the Pump lasers
AddAnalogInputChannel("PumpCavityRampVoltage", tclBoardPump + "/ai8", AITerminalConfiguration.Rse); //tick
AddAnalogInputChannel("Pumpmaster", tclBoardPump + "/ai1", AITerminalConfiguration.Rse);
AddAnalogInputChannel("Pumpp1", tclBoardPump + "/ai2", AITerminalConfiguration.Rse);
AddAnalogInputChannel("Pumpp2", tclBoardPump + "/ai3", AITerminalConfiguration.Rse);
// Lasers locked to pump cavity
AddAnalogOutputChannel("KeopsysDiodeLaser", tclBoardPump + "/ao2", -4, 4); //tick
AddAnalogOutputChannel("MenloPZT", tclBoardPump + "/ao0", 0, 10); //tick
// Length stabilisation for pump cavity
AddAnalogOutputChannel("PumpCavityLengthVoltage", tclBoardPump + "/ao1", -10, 10); //tick
//TCL configuration for pump cavity
TCLConfig tcl1 = new TCLConfig("Pump Cavity");
tcl1.AddLaser("MenloPZT", "Pumpp1");
tcl1.AddLaser("KeopsysDiodeLaser", "Pumpp2");
tcl1.Trigger = tclBoardPump + "/PFI0";
tcl1.Cavity = "PumpCavityRampVoltage";
tcl1.MasterLaser = "Pumpmaster";
tcl1.Ramp = "PumpCavityLengthVoltage";
tcl1.TCPChannel = 1190;
tcl1.AnalogSampleRate = 61250;
tcl1.DefaultScanPoints = 500;
tcl1.MaximumNLMFSteps = 20;
tcl1.PointsToConsiderEitherSideOfPeakInFWHMs = 2.5;
tcl1.TriggerOnRisingEdge = false;
tcl1.AddFSRCalibration("MenloPZT", 3.84);
tcl1.AddFSRCalibration("KeopsysDiodeLaser", 3.84);
tcl1.AddDefaultGain("Master", 0.3);
tcl1.AddDefaultGain("MenloPZT", -0.2);
tcl1.AddDefaultGain("KeopsysDiodeLaser", 4);
Info.Add("PumpCavity", tcl1);
Info.Add("DefaultCavity", tcl1);
// Probe cavity inputs
AddAnalogInputChannel("ProbeRampVoltage", tclBoardProbe + "/ai0", AITerminalConfiguration.Rse); //tick
AddAnalogInputChannel("Probemaster", tclBoardProbe + "/ai1", AITerminalConfiguration.Rse); //tick
AddAnalogInputChannel("Probep1", tclBoardProbe + "/ai2", AITerminalConfiguration.Rse); //tick
// Lasers locked to Probe cavity
AddAnalogOutputChannel("TopticaSHGPZT", tclBoardProbe + "/ao0", -4, 4); //tick
AddAnalogOutputChannel("ProbeCavityLengthVoltage", tclBoardProbe + "/ao1", -10, 10); //tick
// TCL configuration for Probe cavity
TCLConfig tcl2 = new TCLConfig("Probe Cavity");
tcl2.AddLaser("TopticaSHGPZT", "Probep1");
tcl2.Trigger = tclBoardProbe + "/PFI0";
tcl2.Cavity = "ProbeRampVoltage";
tcl2.MasterLaser = "Probemaster";
tcl2.Ramp = "ProbeCavityLengthVoltage";
tcl2.TCPChannel = 1191;
tcl2.AnalogSampleRate = 61250 / 2;
tcl2.DefaultScanPoints = 250;
tcl2.MaximumNLMFSteps = 20;
tcl2.PointsToConsiderEitherSideOfPeakInFWHMs = 12;
tcl2.AddFSRCalibration("TopticaSHGPZT", 3.84);
tcl2.TriggerOnRisingEdge = false;
tcl2.AddDefaultGain("Master", 0.4);
tcl2.AddDefaultGain("TopticaSHGPZT", 0.04);
Info.Add("ProbeCavity", tcl2);
//Info.Add("DefaultCavity", tcl2);
// Obsolete Laser control
AddAnalogOutputChannel("probeAOM", aoBoard + "/ao19", 0, 10);
AddAnalogOutputChannel("pumpAOM", aoBoard + "/ao20", 0, 10);
AddAnalogOutputChannel("fibreAmpPwr", aoBoard + "/ao3");
AddAnalogOutputChannel("I2LockBias", aoBoard + "/ao5", 0, 5);
//Microwave Control Channels
AddAnalogOutputChannel("uWaveDCFM", aoBoard + "/ao11", -2.5, 2.5);
//AddAnalogOutputChannel("uWaveMixerV", aoBoard + "/ao12", 0, 10);
AddAnalogOutputChannel("pumpMixerV", aoBoard + "/ao19", 0, 5);
AddAnalogOutputChannel("bottomProbeMixerV", aoBoard + "/ao24", 0, 5);
AddAnalogOutputChannel("topProbeMixerV", aoBoard + "/ao25", 0, 5);
//RF control Channels
AddAnalogOutputChannel("VCO161Amp", aoBoard + "/ao13", 0, 10);
AddAnalogOutputChannel("VCO161Freq", aoBoard + "/ao14", 0, 10);
AddAnalogOutputChannel("VCO30Amp", aoBoard + "/ao15", 0, 10);
AddAnalogOutputChannel("VCO30Freq", aoBoard + "/ao16", 0, 10);
AddAnalogOutputChannel("VCO155Amp", aoBoard + "/ao17", 0, 10);
AddAnalogOutputChannel("VCO155Freq", aoBoard + "/ao18", 0, 10);
}
