internal IDevice Create(IDDK cmDDK, string name)
{
// Create our IDevice object
m_MyCmDevice = cmDDK.CreateDevice(name, "Nelson NCI 900 Master Device");
// Create our properties
// ModelNo
m_ModelNoProperty =
m_MyCmDevice.CreateStandardProperty(StandardPropertyID.ModelNo, cmDDK.CreateString(20));
// DebugCommand
ITypeString tString = cmDDK.CreateString(255);
m_DebugCommand = m_MyCmDevice.CreateProperty("DebugCommand",
"For internal use only.", tString);
m_DebugCommand.AuditLevel = AuditLevel.Message;
m_DebugCommand.OnSetProperty += new SetPropertyEventHandler(OnDebugCommand);
ITypeDouble tDouble = cmDDK.CreateDouble(0, 100, 1);
tDouble.Unit = "%";
IProperty dblProp =
m_MyCmDevice.CreateProperty("DoubleProp", "DoubleHelp", tDouble);
return(m_MyCmDevice);
}
/// <summary>
/// Create our Dionex.Chromeleon.Symbols.IDevice and our Properties and Commands
/// </summary>
/// <param name="cmDDK">The DDK instance</param>
/// <param name="name">The name for our device</param>
/// <returns>our IDevice object</returns>
internal IDevice Create(IDDK cmDDK, string name)
{
m_MyCmDDK = cmDDK;
// Create our Dionex.Chromeleon.Symbols.IDevice
m_MyCmDevice = cmDDK.CreateDevice(name, "Autosampler device.");
ITypeDouble tVolume = cmDDK.CreateDouble(0.1, 10.0, 1);
tVolume.Unit = "µL";
ITypeInt tPosition = cmDDK.CreateInt(1, 10);
for (int i = 1; i <= 10; i++)
{
tPosition.AddNamedValue("RA" + i.ToString(), i);
}
tPosition.NamedValuesOnly = false;
m_InjectHandler = m_MyCmDevice.CreateInjectHandler(tVolume, tPosition);
m_InjectHandler.PositionProperty.OnSetProperty +=
new SetPropertyEventHandler(OnSetPosition);
m_InjectHandler.VolumeProperty.OnSetProperty +=
new SetPropertyEventHandler(OnSetVolume);
m_InjectHandler.InjectCommand.OnCommand += new CommandEventHandler(OnInject);
ICommand simulateVialNotFoundCommand =
m_MyCmDevice.CreateCommand("SimulateVialNotFound", "Simulate a vial not found error");
simulateVialNotFoundCommand.OnCommand += new CommandEventHandler(simulateVialNotFoundCommand_OnCommand);
ICommand modifyPositionTypeCommand =
m_MyCmDevice.CreateCommand("ModifyPositionType", "Changes the data type of the Position property and the Inject.Position parameter");
modifyPositionTypeCommand.OnCommand += new CommandEventHandler(modifyPositionTypeCommand_OnCommand);
ICommand modifyVolumeTypeCommand =
m_MyCmDevice.CreateCommand("ModifyVolumeType", "Changes the data type of the Volume property and the Inject.Volume parameter");
modifyVolumeTypeCommand.OnCommand += new CommandEventHandler(modifyVolumeTypeCommand_OnCommand);
ITypeString tTrayDescription = cmDDK.CreateString(500); // ensure length is sufficient, but don't be too generous
m_TrayDesciptionProperty = m_MyCmDevice.CreateStandardProperty(StandardPropertyID.TrayDescription, tTrayDescription);
m_TrayDesciptionProperty.AuditLevel = AuditLevel.Service;
m_TrayDesciptionProperty.Update(GenerateTrayDescription());
// In this example driver, simulating the injection process
// is handled by a timer started by the Inject command.
// When the timer has elapsed the inject response is generated.
m_InjectionTimer.Elapsed += new System.Timers.ElapsedEventHandler(m_InjectionTimer_Elapsed);
m_InjectionTimer.AutoReset = false;
return(m_MyCmDevice);
}
/// <summary>
/// Create our Dionex.Chromeleon.Symbols.IDevice and our Properties and Commands
/// </summary>
/// <param name="cmDDK">The DDK instance</param>
/// <param name="name">The name for our device</param>
/// <returns>our IDevice object</returns>
internal IDevice Create(IDDK cmDDK, string name)
{
// Create the Dionex.Chromeleon.Symbols.IDevice
m_MyCmDevice = cmDDK.CreateDevice(name, "This is an example device.");
// create a few example properties
// A Data type for seconds ranging from 0 - 59
ITypeInt tSeconds = cmDDK.CreateInt(0, 59);
tSeconds.Unit = "s";
// Create the "Clock" property
m_ClockProperty = m_MyCmDevice.CreateProperty("Clock",
"This is a second counter",
tSeconds);
// Attach the OnSetClockProperty handler to the "Clock" property
m_ClockProperty.OnSetProperty += new SetPropertyEventHandler(OnSetClockProperty);
// we will use a timer to update the clock property each second
// Attach the OnTimedEvent handler to the timer.
m_clockTimer.Elapsed += new ElapsedEventHandler(OnTimedEvent);
// A Data type with two values 0 and 1
ITypeInt tEnable = cmDDK.CreateInt(0, 1);
tEnable.AddNamedValue("false", 0);
tEnable.AddNamedValue("true", 1);
// Create the "EnableClock" property
m_EnableClockProperty = m_MyCmDevice.CreateProperty("EnableClock",
"Enable / disable the clock",
tEnable);
// Attach the OnEnableClock handler to the "EnableClock" property
m_EnableClockProperty.OnSetProperty += new SetPropertyEventHandler(OnEnableClock);
// A Data type for a percentage ranging from 0.0 - 100.0
ITypeDouble tPercent = cmDDK.CreateDouble(0, 100, 2);
tPercent.Unit = "%";
// Create the "Percentage" property
m_PercentageProperty = m_MyCmDevice.CreateProperty("Percentage",
"This is a percentage property",
tPercent);
// Attach the OnSetProperty handler to the "Percentage" property
m_PercentageProperty.OnSetProperty += new SetPropertyEventHandler(OnSetProperty);
// A Data type for a time constant ranging from 1.0 - 10.0
ITypeDouble tTimeConstant = cmDDK.CreateDouble(1.0, 10.0, 1);
tTimeConstant.AddNamedValue("Off", 0.0);
tTimeConstant.Unit = "s";
// Create the "Percentage" property
m_FilterTimeConstantProperty = m_MyCmDevice.CreateProperty("FilterTimeConstant",
"This is a numeric property with one special named value.",
tTimeConstant);
// Attach the OnSetProperty handler to the "FilterTimeConstant" property
m_FilterTimeConstantProperty.OnSetProperty += new SetPropertyEventHandler(OnSetProperty);
// A Data type for the measurement range property
ITypeDouble tMeasurementRange = cmDDK.CreateDouble(0.01, 100.0, 2);
tMeasurementRange.LegalValues = new double[] { 0.01, 0.1, 1.0, 10.0, 100.0 };
tMeasurementRange.EnforceLegalValues = true;
tMeasurementRange.Unit = "V";
// Create the "Percentage" property
m_MeasurementRangeProperty = m_MyCmDevice.CreateProperty("MeasurementRange",
"This is a numeric property with 5 legal (valid) values.",
tMeasurementRange);
// Attach the OnSetProperty handler to the "FilterTimeConstant" property
m_MeasurementRangeProperty.OnSetProperty += new SetPropertyEventHandler(OnSetProperty);
// A Data type for a string with 20 characters at most
ITypeString tString = cmDDK.CreateString(20);
// Create the "AnyText" property
m_AnyTextProperty = m_MyCmDevice.CreateProperty("AnyText",
"This is a string property",
tString);
// Attach the OnSetProperty handler to the "AnyText" property
m_AnyTextProperty.OnSetProperty += new SetPropertyEventHandler(OnSetProperty);
// Create the "ToggleEnableClock" example command
m_Command = m_MyCmDevice.CreateCommand("ToggleEnableClock", "This is a simple command that toggles the EnableClock property.");
// Attach the OnToggleEnableClock handler to the "ToggleEnableClock" command
m_Command.OnCommand += new CommandEventHandler(OnToggleEnableClock);
// Create the "SetEnableClock" command which uses a parameter.
m_SetEnableClockCommand = m_MyCmDevice.CreateCommand("SetEnableClock", "This is a command with one required parameter. Set true or false to enable/disable the clock.");
// Add the "Enable" parameter to the "SetEnableClock" command
IParameter parameter = m_SetEnableClockCommand.AddParameter("Enable", "Set true or false to enable/disable the clock", tEnable);
// This is a required parameter.
parameter.Required = true;
// Attach the OnSetEnableClock handler to the "SetEnableClock" command
m_SetEnableClockCommand.OnCommand += new CommandEventHandler(OnSetEnableClock);
// Create the "SetPercentage" command which uses a parameter.
m_SetPercentageCommand = m_MyCmDevice.CreateCommand("SetPercentage", "This is a command with one required parameter to set the \"Percentage\" property.");
// Add the "Value" parameter to the "SetPercentage" command
parameter = m_SetPercentageCommand.AddParameter("Value", "Set to 0.00 - 100.00", tPercent);
// This is a required parameter.
parameter.Required = true;
// Attach the OnSetPercentage handler to the "SetPercentage" command
m_SetPercentageCommand.OnCommand += new CommandEventHandler(OnSetPercentage);
// Create the "CommandWith4Parameters" command which uses 4 optional parameters.
m_CommandWith4Parameters = m_MyCmDevice.CreateCommand("CommandWith4Parameters", "This is a command with four optional parameters.");
// Add the parameters to the "CommandWith4Parameters" command
m_CommandWith4Parameters.AddParameter("Param1", "Set true or false", tEnable);
m_CommandWith4Parameters.AddParameter("Param2", "Set to 0.00 - 100.00", tPercent);
m_CommandWith4Parameters.AddParameter("Param3", "Set true or false", tEnable);
m_CommandWith4Parameters.AddParameter("Param4", "A string with 20 characters", tString);
// Attach the OnCommandWith4Parameters handler to the "CommandWith4Parameters" command
m_CommandWith4Parameters.OnCommand += new CommandEventHandler(OnCommandWith4Parameters);
return(m_MyCmDevice);
}