private void PrepareFor3D_inNBI(IPCBIWindow Parent)
{
IMatrix matrix = Parent.GetMatrix();
IStep step = Parent.GetCurrentStep();
MakeSolderMaskPositive(matrix);
MakeDrillCutOutOnCopperLayers(Parent, matrix, step);
Parent.UIAction.Execute(ID_ActionItem.ID_CLEAR_SELECTION);
Parent.UIAction.Execute(ID_ActionItem.ID_ALL_LAYER_OFF);
Parent.UIAction.Execute(ID_ActionItem.ID_ALL_SIGNAL_LAYER_ON);
Parent.UpdateView();
Parent.UIAction.Execute(ID_ActionItem.ID_SAVE);
String JobLocation = Parent.GetODBJobDirectory();
if (File.Exists(pathNBICatia))
{
try
{
ProcessStartInfo ps = new ProcessStartInfo(pathNBICatia, "\"" + JobLocation + "\"");
Process.Start(ps);
// Process.Start(pathNBICatia + " " + "\"" + JobLocation + "\"");
}
catch (Exception ex)
{
PCB_Investigator.Localization.PCBILocalization.ShowMsgBox("Can not open NBI, because " + ex.Message.ToString(), "Warning", MessageBoxButtons.OK, MessageBoxIcon.Asterisk);
}
}
}
public void Execute(IPCBIWindow parent)
{
try{
SaveFileDialog saveTgz = new SaveFileDialog();
saveTgz.Filter = "Tgz-Archiv(*.7z)|*.7z";
saveTgz.Title = "Save 7z-Archiv";
if (saveTgz.ShowDialog() != DialogResult.OK)
{
return;
}
var processStartInfo = new System.Diagnostics.ProcessStartInfo();
processStartInfo.FileName = @"D:\Program Files\7-Zip\7z.exe";
if (!File.Exists(processStartInfo.FileName))
{
MessageBox.Show("This script works only with installation of 7z on your D-Drive. Please change path in code or install 7z first.", "Warning");
return;
}
string directoryPath = parent.GetODBJobDirectory();
string args = "a -r " + saveTgz.FileName + " " + directoryPath;
//example from there faq 7z.exe a -r c:\a.7z "C:\Data"
processStartInfo.Arguments = args;
var process = System.Diagnostics.Process.Start(processStartInfo);
process.WaitForExit();
}
catch (Exception ex)
{
MessageBox.Show("Error! " + ex.ToString(), "Error");
}
}
public void Execute(IPCBIWindow parent)
{
//your code here
ProcessStartInfo psi = new ProcessStartInfo();
string realPCBI = Environment.GetFolderPath(Environment.SpecialFolder.LocalApplicationData) + System.IO.Path.DirectorySeparatorChar + "EasyLogix" + System.IO.Path.DirectorySeparatorChar + "PCB-Investigator" + Path.DirectorySeparatorChar + "Scripts" + Path.DirectorySeparatorChar;
psi.FileName = realPCBI + @"\CadenceNetGroup2PCBI.exe";
psi.Arguments = parent.GetODBJobDirectory() + " -step " + parent.GetCurrentStep().Name;
Process.Start(psi);
parent.UpdateView();
}
public string FileSaveDialog(IPCBIWindow parent)
{
SaveFileDialog saveFileDialog1 = new SaveFileDialog();
saveFileDialog1.InitialDirectory = parent.GetODBJobDirectory();
saveFileDialog1.FileName = parent.GetJobName();
saveFileDialog1.Title = "Save Seica Files";
saveFileDialog1.CheckFileExists = false;
saveFileDialog1.OverwritePrompt = true;
saveFileDialog1.CheckPathExists = true;
saveFileDialog1.DefaultExt = "par";
saveFileDialog1.Filter = "PAR files (*.par)|*.par|All files (*.*)|*.*";
saveFileDialog1.FilterIndex = 2;
saveFileDialog1.RestoreDirectory = true;
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
return(saveFileDialog1.FileName);
}
return(string.Empty);
}
public void Execute(IPCBIWindow parent)
{
//your code here
if (parent == null)
{
return;
}
System.Globalization.NumberFormatInfo nfi = new System.Globalization.NumberFormatInfo();
nfi.NumberDecimalSeparator = ".";
nfi.NumberGroupSeparator = "";
IStep step = parent.GetCurrentStep();
IFilter filter = new IFilter(parent);
StringBuilder sb = new StringBuilder();
IMatrix m = parent.GetMatrix();
List <int> netnumbers = step.GetAllNetNrs();
Dictionary <int, List <PCBIObject> > allNetNrsWithItems = PCBI.Automation.NetCreation.NetCreator.CreateGlobalNet(step, m, true);
foreach (int netlist in allNetNrsWithItems.Keys)
{
foreach (PCBIObject oObject in allNetNrsWithItems[netlist])
{
oObject.iObj.PcbNetNumber = oObject.NetNrGlobal;
}
}
List <string> names = step.GetAllLayerNames();
foreach (string layername in names)
{
if (step.GetLayer(layername).GetType() == typeof(IODBLayer))
{
IODBLayer layer = (IODBLayer)step.GetLayer(layername);
if (m.GetMatrixLayerType(layername) == MatrixLayerType.Signal || m.GetMatrixLayerType(layername) == MatrixLayerType.Rout || m.GetMatrixLayerType(layername) == MatrixLayerType.Drill || m.GetMatrixLayerType(layername) == MatrixLayerType.Mask)
{
foreach (IODBObject obj in layer.GetAllLayerObjects())
{
int PCB_NetNum = obj.PcbNetNumber;
int LayerNetNum = obj.LayerNetNumber;
obj.FreeText = PCB_NetNum.ToString();
//sb.Append("P: " + PCB_NetNum.ToString() + "L: " + LayerNetNum.ToString() + Environment.NewLine);
}
}
}
}
sb.Append("P VER IPC D 356" + Environment.NewLine);
sb.Append("P IMAGE PRIMARY" + Environment.NewLine);
sb.Append("C Created with PCB-Investigator" + Environment.NewLine);
sb.Append("P Creation date:" + DateTime.Now.ToShortDateString() + Environment.NewLine);
sb.Append("C " + step.Name + " " + parent.GetJobName() + Environment.NewLine);
sb.Append("C" + Environment.NewLine);
sb.Append("P CUST 0" + Environment.NewLine);
#region descriptions
// Units of measurement :
//SI Metric
//CUST 0 or CUST Inches and degrees
//CUST 1 Millimeters and degrees
//CUST 2 Inches and radians
//ALLOWED OPERATION CODES (columns 1-3)
//317 Through hole. Alternatively it can represent a feature and through hole at a point.
//017 Continuation record that defines a through hole associated with the previous record
//367 Non-plated tooling hole
//327 Surface mount feature
//027 Continuation record that defines a through hole associated with the previous record
//099 Test point location of the feature described in the previous record
//088 Solder mask clearance of the feature described in the previous record
//307 Blind or buried via
//309 Image 2 through NNNN offset data
//370 In-board resistor, capacitor or inductor
//070 Continuation of In-board resistor, capacitor or inductor
//378 Conductor segment data
//078 Continuation record of conductor segment data
//379 Adjacency data record
//079 Continuation of adjacency data record
//380 On-board resistor, capacitor or inductor
//080 Continuation of on-board resistor, capacitor or inductor
//389 Board, panel or sub-panel , scoring or other fabrication outline data
//089 Continuation of outline data
//390 Non-test feature such as fiducials , targets , test status marking location , etc …
//090 Reference for high-voltage isolation , impedance and other specified tests
//999 End of Job data file
#endregion
List <string> drillNames = m.GetAllDrillLayerNames();
foreach (string drilName in drillNames)
{
IODBLayer layer = (IODBLayer)step.GetLayer(drilName);
string LayerNumber = m.GetRawIndexByName(layer.LayerName).ToString();
foreach (IODBObject via in layer.GetAllLayerObjects())
{
string NetName = via.PcbNetNumber.ToString();;
IObjectSpecifics viaSpec = via.GetSpecifics();
if (viaSpec.GetType() == typeof(IPadSpecifics))
{
float x = ((IPadSpecifics)viaSpec).Location.X;
float y = ((IPadSpecifics)viaSpec).Location.Y;
double diameter = ((IPadSpecifics)viaSpec).Diameter;
string currentLine = new string(' ', 255);
currentLine = currentLine.Insert(0, "317");
currentLine = currentLine.Insert(4, NetName);
currentLine = currentLine.Insert(21, "VIA");
currentLine = currentLine.Insert(27, "-");
//currentLine = currentLine.Insert(28, LayerNumber);
currentLine = currentLine.Insert(33, "D");
currentLine = currentLine.Insert(34, diameter.ToString("N2", nfi));
currentLine = currentLine.Insert(38, "P ");
currentLine = currentLine.Insert(42, "X");
if (Math.Sign(x) == 1)
{
currentLine = currentLine.Insert(43, "+");
}
else
{
currentLine = currentLine.Insert(43, "-");
}
currentLine = currentLine.Insert(44, x.ToString("N2", nfi));
currentLine = currentLine.Insert(50, "Y");
if (Math.Sign(y) == 1)
{
currentLine = currentLine.Insert(51, "+");
}
else
{
currentLine = currentLine.Insert(51, "-");
}
currentLine = currentLine.Insert(52, y.ToString("N2", nfi));
currentLine = currentLine.Insert(58, "X");
currentLine = currentLine.Insert(59, diameter.ToString("N2", nfi));
currentLine = currentLine.Insert(63, "Y");
currentLine = currentLine.Insert(64, diameter.ToString("N2", nfi));
currentLine = currentLine.Insert(73, "S");
currentLine = currentLine.Insert(74, "3");
sb.Append(currentLine + Environment.NewLine);
}
}
}
IODBLayer LayerPTop = (IODBLayer)step.GetLayer(m.GetTopSignalLayer());
if (LayerPTop != null)
{
string LayerNumber = m.GetRawIndexByName(LayerPTop.LayerName).ToString();
foreach (IODBObject padTop in LayerPTop.GetAllLayerObjects())
{
string NetName = padTop.PcbNetNumber.ToString();;
IObjectSpecifics os = padTop.GetSpecifics();
if (os.GetType() == typeof(IPadSpecifics))
{
IPadSpecifics oPad = (IPadSpecifics)os;
PointF PadMidPoint = new PointF(padTop.GetBounds().X + padTop.GetBounds().Width / 2, padTop.GetBounds().Y + padTop.GetBounds().Height / 2);
string currentLine = new string(' ', 255);
currentLine = currentLine.Insert(0, "327");
currentLine = currentLine.Insert(4, NetName);
currentLine = currentLine.Insert(21, "PAD");
currentLine = currentLine.Insert(27, " ");
currentLine = currentLine.Insert(28, LayerNumber);
currentLine = currentLine.Insert(33, "D");
currentLine = currentLine.Insert(34, padTop.GetBounds().Width.ToString("N2", nfi));
currentLine = currentLine.Insert(38, "P ");
currentLine = currentLine.Insert(42, "X");
if (Math.Sign(PadMidPoint.X) == 1)
{
currentLine = currentLine.Insert(43, "+");
}
else
{
currentLine = currentLine.Insert(43, "-");
}
currentLine = currentLine.Insert(44, PadMidPoint.X.ToString("N2", nfi));
currentLine = currentLine.Insert(50, "Y");
if (Math.Sign(PadMidPoint.Y) == 1)
{
currentLine = currentLine.Insert(51, "+");
}
else
{
currentLine = currentLine.Insert(51, "-");
}
currentLine = currentLine.Insert(52, PadMidPoint.Y.ToString("N2", nfi));
currentLine = currentLine.Insert(58, "W");
currentLine = currentLine.Insert(59, padTop.GetBounds().Width.ToString("N2", nfi));
currentLine = currentLine.Insert(63, "H");
currentLine = currentLine.Insert(64, padTop.GetBounds().Height.ToString("N2", nfi));
currentLine = currentLine.Insert(73, "S");
currentLine = currentLine.Insert(74, "1");
sb.Append(currentLine + Environment.NewLine);
}
}
}
IODBLayer LayerPBot = (IODBLayer)step.GetLayer(m.GetBotSignalLayer());
if (LayerPBot != null)
{
string LayerNumber = m.GetRawIndexByName(LayerPBot.LayerName).ToString();
foreach (IODBObject padBot in LayerPBot.GetAllLayerObjects())
{
string NetName = padBot.PcbNetNumber.ToString();;
IObjectSpecifics os = padBot.GetSpecifics();
if (os.GetType() == typeof(IPadSpecifics))
{
IPadSpecifics oPad = (IPadSpecifics)os;
PointF PadMidPoint = new PointF(padBot.GetBounds().X + padBot.GetBounds().Width / 2, padBot.GetBounds().Y + padBot.GetBounds().Height / 2);
string currentLine = new string(' ', 255);
currentLine = currentLine.Insert(0, "327");
currentLine = currentLine.Insert(4, NetName);
currentLine = currentLine.Insert(21, "PAD");
currentLine = currentLine.Insert(27, " ");
currentLine = currentLine.Insert(28, LayerNumber);
currentLine = currentLine.Insert(33, "D");
currentLine = currentLine.Insert(34, padBot.GetBounds().Width.ToString("N2", nfi));
currentLine = currentLine.Insert(38, "P ");
currentLine = currentLine.Insert(42, "X");
if (Math.Sign(PadMidPoint.X) == 1)
{
currentLine = currentLine.Insert(43, "+");
}
else
{
currentLine = currentLine.Insert(43, "-");
}
currentLine = currentLine.Insert(44, PadMidPoint.X.ToString("N2", nfi));
currentLine = currentLine.Insert(50, "Y");
if (Math.Sign(PadMidPoint.Y) == 1)
{
currentLine = currentLine.Insert(51, "+");
}
else
{
currentLine = currentLine.Insert(51, "-");
}
currentLine = currentLine.Insert(52, PadMidPoint.Y.ToString("N2", nfi));
currentLine = currentLine.Insert(58, "W");
currentLine = currentLine.Insert(59, padBot.GetBounds().Width.ToString("N2", nfi));
currentLine = currentLine.Insert(63, "H");
currentLine = currentLine.Insert(64, padBot.GetBounds().Height.ToString("N2", nfi));
currentLine = currentLine.Insert(73, "S");
currentLine = currentLine.Insert(74, "1");
sb.Append(currentLine + Environment.NewLine);
}
}
}
sb.Append("999" + Environment.NewLine); // End of File
string text = sb.ToString();
Directory.CreateDirectory(parent.GetODBJobDirectory() + "\\user\\");
FileStream fs = new FileStream(parent.GetODBJobDirectory() + "\\user\\IPC356.txt", FileMode.OpenOrCreate);
StreamWriter sr = new StreamWriter(fs, Encoding.UTF8);
fs.SetLength(0);
sr.WriteLine(text);
sr.Close();
fs.Close();
parent.UpdateView();
}