private void MakeObjectsNegative(IODBLayer Layer)
{
foreach (IODBObject obj in Layer.GetAllLayerObjects())
{
IObjectSpecifics os = obj.GetSpecifics();
if (os.GetType() == typeof(IPadSpecifics))
{
((IPadSpecifics)os).Positive = false;
}
if (os.GetType() == typeof(IArcSpecifics))
{
((IArcSpecifics)os).Positive = false;
}
if (os.GetType() == typeof(ILineSpecifics))
{
((ILineSpecifics)os).Positive = false;
}
if (os.GetType() == typeof(ISurfaceSpecifics))
{
((ISurfaceSpecifics)os).Positive = false;
}
if (os.GetType() == typeof(ITextSpecifics))
{
((ITextSpecifics)os).Positive = false;
}
obj.SetSpecifics(os);
}
}
private void SetToGrid(float grid, IPCBIWindow parent)
{
IStep step = parent.GetCurrentStep();
foreach (IODBObject obj in step.GetSelectedElements())
{
IObjectSpecifics obs = obj.GetSpecifics();
if (obs.GetType() == typeof(ILineSpecifics))
{
ILineSpecifics lines = (ILineSpecifics)obs;
lines.Start.X = correction(lines.Start.X, grid);
lines.Start.Y = correction(lines.Start.Y, grid);
lines.End.X = correction(lines.End.X, grid);
lines.End.Y = correction(lines.End.Y, grid);
obj.SetSpecifics(lines);
}
else
if (obs.GetType() == typeof(IPadSpecifics))
{
IPadSpecifics pads = (IPadSpecifics)obs;
pads.Location.X = correction(pads.Location.X, grid);
pads.Location.Y = correction(pads.Location.Y, grid);
obj.SetSpecifics(pads);
}
}
}
private double CalculateNetLenth(List <IODBObject> list)
{
double distance = 0;
foreach (IODBObject odbObj in list)
{
IObjectSpecifics lineSpec = odbObj.GetSpecifics();
if (lineSpec.GetType() == typeof(ILineSpecifics))
{
distance += distancePointToPoint(((ILineSpecifics)lineSpec).Start, ((ILineSpecifics)lineSpec).End);
}
}
return(distance);
}
public void Execute(IPCBIWindow parent)
{
if (parent == null)
{
return;
}
TextType tt = TextType.angle;
ShowInputDialog(ref tt);
// MessageBox.Show( tt.ToString());
IMatrix m = parent.GetMatrix();
IStep step = parent.GetCurrentStep();
if (tt == TextType.angle)
{
foreach (string layerName in m.GetAllSignalLayerNames())
{
IODBLayer layer = (IODBLayer)step.GetLayer(layerName);
foreach (IODBObject obj in layer.GetAllLayerObjects())
{
IObjectSpecifics os = obj.GetSpecifics();
if (os.GetType() == typeof(ILineSpecifics))
{
ILineSpecifics lineEdges = (ILineSpecifics)os;
double angle = PCBI.MathUtils.IMath.GetAngle(PCBI.MathUtils.PointD.FromPointF(lineEdges.Start), PCBI.MathUtils.PointD.FromPointF(lineEdges.End));
obj.FreeText = "? " + angle.ToString();
}
if (os.GetType() == typeof(IPadSpecifics))
{
IPadSpecifics PAD = (IPadSpecifics)os;
double angle = PAD.Rotation;
obj.FreeText = "? " + angle.ToString();
}
}
}
}
if (tt == TextType.lenght)
{
foreach (string layerName in m.GetAllSignalLayerNames())
{
IODBLayer layer = (IODBLayer)step.GetLayer(layerName);
foreach (IODBObject obj in layer.GetAllLayerObjects())
{
IObjectSpecifics os = obj.GetSpecifics();
if (os.GetType() == typeof(ILineSpecifics))
{
ILineSpecifics lineEdges = (ILineSpecifics)os;
double length = PCBI.MathUtils.IMath.DistancePointToPoint(PCBI.MathUtils.PointD.FromPointF(lineEdges.Start), PCBI.MathUtils.PointD.FromPointF(lineEdges.End)) / 100;
if (parent.GetUnit())
{
length *= 2.54f;
}
length = Math.Round(length, 2);
obj.FreeText = "L: " + length.ToString();
}
if (os.GetType() == typeof(IPadSpecifics))
{
IPadSpecifics PAD = (IPadSpecifics)os;
RectangleF bounds = obj.GetBounds();
double w = bounds.Width / 100;
double h = bounds.Height / 100;
if (parent.GetUnit())
{
w *= 2.54f;
h *= 2.54f;
}
w = Math.Round(w, 2);
h = Math.Round(h, 2);
obj.FreeText = "w: " + w.ToString() + " h: " + h.ToString();
}
}
}
}
if (tt == TextType.ViaCount)
{
foreach (INet NetList in step.GetNets())
{
int drillCount = 0;
foreach (IODBObject obj in NetList.GetAllNetObjects(parent))
{
if (m.GetMatrixLayerType(obj.GetParentLayerName()) == MatrixLayerType.Drill)
{
drillCount++;
}
}
foreach (IODBObject obj in NetList.GetAllNetObjects(parent))
{
obj.FreeText = "DrillCount: " + drillCount.ToString();
}
}
}
if (tt == TextType.NetOnLayer)
{
foreach (INet NetList in step.GetNets())
{
string LNames = "";
foreach (string LayerNames in NetList.GetAllUsedLayers(step))
{
if (m.GetMatrixLayerType(LayerNames) == MatrixLayerType.Signal)
{
LNames += LayerNames + "; ";
}
}
foreach (IODBObject obj in NetList.GetAllNetObjects(parent))
{
obj.FreeText = "layer: " + LNames;
}
}
}
if (tt == TextType.NetLength)
{
foreach (INet NetList in step.GetNets())
{
double length = CalculateNetLenth(NetList.GetAllNetObjects(parent)) / 100;
if (parent.GetUnit())
{
length *= 2.54f;
}
foreach (IODBObject obj in NetList.GetAllNetObjects(parent))
{
obj.FreeText = "Netlength: " + Math.Round(length, 2);
}
}
}
parent.ShowFreeTextInfoOnAllLayer = true;
parent.UpdateView();
}
public void Execute(IPCBIWindow parent)
{
//your code here
if (parent == null)
{
return;
}
System.Globalization.NumberFormatInfo nfi = new System.Globalization.NumberFormatInfo();
nfi.NumberDecimalSeparator = ".";
nfi.NumberGroupSeparator = "";
IStep step = parent.GetCurrentStep();
IFilter filter = new IFilter(parent);
StringBuilder sb = new StringBuilder();
IMatrix m = parent.GetMatrix();
List <int> netnumbers = step.GetAllNetNrs();
Dictionary <int, List <PCBIObject> > allNetNrsWithItems = PCBI.Automation.NetCreation.NetCreator.CreateGlobalNet(step, m, true);
foreach (int netlist in allNetNrsWithItems.Keys)
{
foreach (PCBIObject oObject in allNetNrsWithItems[netlist])
{
oObject.iObj.PcbNetNumber = oObject.NetNrGlobal;
}
}
List <string> names = step.GetAllLayerNames();
foreach (string layername in names)
{
if (step.GetLayer(layername).GetType() == typeof(IODBLayer))
{
IODBLayer layer = (IODBLayer)step.GetLayer(layername);
if (m.GetMatrixLayerType(layername) == MatrixLayerType.Signal || m.GetMatrixLayerType(layername) == MatrixLayerType.Rout || m.GetMatrixLayerType(layername) == MatrixLayerType.Drill || m.GetMatrixLayerType(layername) == MatrixLayerType.Mask)
{
foreach (IODBObject obj in layer.GetAllLayerObjects())
{
int PCB_NetNum = obj.PcbNetNumber;
int LayerNetNum = obj.LayerNetNumber;
obj.FreeText = PCB_NetNum.ToString();
//sb.Append("P: " + PCB_NetNum.ToString() + "L: " + LayerNetNum.ToString() + Environment.NewLine);
}
}
}
}
sb.Append("P VER IPC D 356" + Environment.NewLine);
sb.Append("P IMAGE PRIMARY" + Environment.NewLine);
sb.Append("C Created with PCB-Investigator" + Environment.NewLine);
sb.Append("P Creation date:" + DateTime.Now.ToShortDateString() + Environment.NewLine);
sb.Append("C " + step.Name + " " + parent.GetJobName() + Environment.NewLine);
sb.Append("C" + Environment.NewLine);
sb.Append("P CUST 0" + Environment.NewLine);
#region descriptions
// Units of measurement :
//SI Metric
//CUST 0 or CUST Inches and degrees
//CUST 1 Millimeters and degrees
//CUST 2 Inches and radians
//ALLOWED OPERATION CODES (columns 1-3)
//317 Through hole. Alternatively it can represent a feature and through hole at a point.
//017 Continuation record that defines a through hole associated with the previous record
//367 Non-plated tooling hole
//327 Surface mount feature
//027 Continuation record that defines a through hole associated with the previous record
//099 Test point location of the feature described in the previous record
//088 Solder mask clearance of the feature described in the previous record
//307 Blind or buried via
//309 Image 2 through NNNN offset data
//370 In-board resistor, capacitor or inductor
//070 Continuation of In-board resistor, capacitor or inductor
//378 Conductor segment data
//078 Continuation record of conductor segment data
//379 Adjacency data record
//079 Continuation of adjacency data record
//380 On-board resistor, capacitor or inductor
//080 Continuation of on-board resistor, capacitor or inductor
//389 Board, panel or sub-panel , scoring or other fabrication outline data
//089 Continuation of outline data
//390 Non-test feature such as fiducials , targets , test status marking location , etc …
//090 Reference for high-voltage isolation , impedance and other specified tests
//999 End of Job data file
#endregion
List <string> drillNames = m.GetAllDrillLayerNames();
foreach (string drilName in drillNames)
{
IODBLayer layer = (IODBLayer)step.GetLayer(drilName);
string LayerNumber = m.GetRawIndexByName(layer.LayerName).ToString();
foreach (IODBObject via in layer.GetAllLayerObjects())
{
string NetName = via.PcbNetNumber.ToString();;
IObjectSpecifics viaSpec = via.GetSpecifics();
if (viaSpec.GetType() == typeof(IPadSpecifics))
{
float x = ((IPadSpecifics)viaSpec).Location.X;
float y = ((IPadSpecifics)viaSpec).Location.Y;
double diameter = ((IPadSpecifics)viaSpec).Diameter;
string currentLine = new string(' ', 255);
currentLine = currentLine.Insert(0, "317");
currentLine = currentLine.Insert(4, NetName);
currentLine = currentLine.Insert(21, "VIA");
currentLine = currentLine.Insert(27, "-");
//currentLine = currentLine.Insert(28, LayerNumber);
currentLine = currentLine.Insert(33, "D");
currentLine = currentLine.Insert(34, diameter.ToString("N2", nfi));
currentLine = currentLine.Insert(38, "P ");
currentLine = currentLine.Insert(42, "X");
if (Math.Sign(x) == 1)
{
currentLine = currentLine.Insert(43, "+");
}
else
{
currentLine = currentLine.Insert(43, "-");
}
currentLine = currentLine.Insert(44, x.ToString("N2", nfi));
currentLine = currentLine.Insert(50, "Y");
if (Math.Sign(y) == 1)
{
currentLine = currentLine.Insert(51, "+");
}
else
{
currentLine = currentLine.Insert(51, "-");
}
currentLine = currentLine.Insert(52, y.ToString("N2", nfi));
currentLine = currentLine.Insert(58, "X");
currentLine = currentLine.Insert(59, diameter.ToString("N2", nfi));
currentLine = currentLine.Insert(63, "Y");
currentLine = currentLine.Insert(64, diameter.ToString("N2", nfi));
currentLine = currentLine.Insert(73, "S");
currentLine = currentLine.Insert(74, "3");
sb.Append(currentLine + Environment.NewLine);
}
}
}
IODBLayer LayerPTop = (IODBLayer)step.GetLayer(m.GetTopSignalLayer());
if (LayerPTop != null)
{
string LayerNumber = m.GetRawIndexByName(LayerPTop.LayerName).ToString();
foreach (IODBObject padTop in LayerPTop.GetAllLayerObjects())
{
string NetName = padTop.PcbNetNumber.ToString();;
IObjectSpecifics os = padTop.GetSpecifics();
if (os.GetType() == typeof(IPadSpecifics))
{
IPadSpecifics oPad = (IPadSpecifics)os;
PointF PadMidPoint = new PointF(padTop.GetBounds().X + padTop.GetBounds().Width / 2, padTop.GetBounds().Y + padTop.GetBounds().Height / 2);
string currentLine = new string(' ', 255);
currentLine = currentLine.Insert(0, "327");
currentLine = currentLine.Insert(4, NetName);
currentLine = currentLine.Insert(21, "PAD");
currentLine = currentLine.Insert(27, " ");
currentLine = currentLine.Insert(28, LayerNumber);
currentLine = currentLine.Insert(33, "D");
currentLine = currentLine.Insert(34, padTop.GetBounds().Width.ToString("N2", nfi));
currentLine = currentLine.Insert(38, "P ");
currentLine = currentLine.Insert(42, "X");
if (Math.Sign(PadMidPoint.X) == 1)
{
currentLine = currentLine.Insert(43, "+");
}
else
{
currentLine = currentLine.Insert(43, "-");
}
currentLine = currentLine.Insert(44, PadMidPoint.X.ToString("N2", nfi));
currentLine = currentLine.Insert(50, "Y");
if (Math.Sign(PadMidPoint.Y) == 1)
{
currentLine = currentLine.Insert(51, "+");
}
else
{
currentLine = currentLine.Insert(51, "-");
}
currentLine = currentLine.Insert(52, PadMidPoint.Y.ToString("N2", nfi));
currentLine = currentLine.Insert(58, "W");
currentLine = currentLine.Insert(59, padTop.GetBounds().Width.ToString("N2", nfi));
currentLine = currentLine.Insert(63, "H");
currentLine = currentLine.Insert(64, padTop.GetBounds().Height.ToString("N2", nfi));
currentLine = currentLine.Insert(73, "S");
currentLine = currentLine.Insert(74, "1");
sb.Append(currentLine + Environment.NewLine);
}
}
}
IODBLayer LayerPBot = (IODBLayer)step.GetLayer(m.GetBotSignalLayer());
if (LayerPBot != null)
{
string LayerNumber = m.GetRawIndexByName(LayerPBot.LayerName).ToString();
foreach (IODBObject padBot in LayerPBot.GetAllLayerObjects())
{
string NetName = padBot.PcbNetNumber.ToString();;
IObjectSpecifics os = padBot.GetSpecifics();
if (os.GetType() == typeof(IPadSpecifics))
{
IPadSpecifics oPad = (IPadSpecifics)os;
PointF PadMidPoint = new PointF(padBot.GetBounds().X + padBot.GetBounds().Width / 2, padBot.GetBounds().Y + padBot.GetBounds().Height / 2);
string currentLine = new string(' ', 255);
currentLine = currentLine.Insert(0, "327");
currentLine = currentLine.Insert(4, NetName);
currentLine = currentLine.Insert(21, "PAD");
currentLine = currentLine.Insert(27, " ");
currentLine = currentLine.Insert(28, LayerNumber);
currentLine = currentLine.Insert(33, "D");
currentLine = currentLine.Insert(34, padBot.GetBounds().Width.ToString("N2", nfi));
currentLine = currentLine.Insert(38, "P ");
currentLine = currentLine.Insert(42, "X");
if (Math.Sign(PadMidPoint.X) == 1)
{
currentLine = currentLine.Insert(43, "+");
}
else
{
currentLine = currentLine.Insert(43, "-");
}
currentLine = currentLine.Insert(44, PadMidPoint.X.ToString("N2", nfi));
currentLine = currentLine.Insert(50, "Y");
if (Math.Sign(PadMidPoint.Y) == 1)
{
currentLine = currentLine.Insert(51, "+");
}
else
{
currentLine = currentLine.Insert(51, "-");
}
currentLine = currentLine.Insert(52, PadMidPoint.Y.ToString("N2", nfi));
currentLine = currentLine.Insert(58, "W");
currentLine = currentLine.Insert(59, padBot.GetBounds().Width.ToString("N2", nfi));
currentLine = currentLine.Insert(63, "H");
currentLine = currentLine.Insert(64, padBot.GetBounds().Height.ToString("N2", nfi));
currentLine = currentLine.Insert(73, "S");
currentLine = currentLine.Insert(74, "1");
sb.Append(currentLine + Environment.NewLine);
}
}
}
sb.Append("999" + Environment.NewLine); // End of File
string text = sb.ToString();
Directory.CreateDirectory(parent.GetODBJobDirectory() + "\\user\\");
FileStream fs = new FileStream(parent.GetODBJobDirectory() + "\\user\\IPC356.txt", FileMode.OpenOrCreate);
StreamWriter sr = new StreamWriter(fs, Encoding.UTF8);
fs.SetLength(0);
sr.WriteLine(text);
sr.Close();
fs.Close();
parent.UpdateView();
}