/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper, IFCExportInfoPair exportType = null)
{
if (element == null || geometryElement == null)
{
return(null);
}
if (exportType == null)
{
exportType = new IFCExportInfoPair(IFCEntityType.IfcBuildingElementProxy, IFCEntityType.IfcBuildingElementProxyType, "NOTDEFINED");
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementProxy;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(null);
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle buildingElementProxy = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, exportType.ValidatedPredefinedType);
productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true);
}
tr.Commit();
}
}
return(buildingElementProxy);
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(null);
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle buildingElementProxy = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(element, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(element, null);
string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(file, guid,
ownerHistory, name, description, objectType, localPlacement, representation, elementTag, null);
productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true);
}
tr.Commit();
}
}
return(buildingElementProxy);
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The IFCProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, IFCProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(false);
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCPlacementSetter placementSetter = IFCPlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.GetPlacement());
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle representation = RepresentationUtil.CreateBRepProductDefinitionShape(element.Document.Application, exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(false);
}
string guid = ExporterIFCUtils.CreateGUID(element);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string objectType = exporterIFC.GetFamilyName();
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.CreateIFCElementId(element);
IFCAnyHandle buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(file, guid,
ownerHistory, objectType, null, objectType, localPlacement, representation, elementTag, Toolkit.IFCElementComposition.Element);
productWrapper.AddElement(buildingElementProxy, placementSetter.GetLevelInfo(), ecData, LevelUtil.AssociateElementToLevel(element));
}
tr.Commit();
return(true);
}
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcBuildingElementPart", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (standaloneExport || asBuildingElement)
{
partExportLevel = partElement.LevelId;
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
{
return;
}
partExportLevel = hostElement.LevelId;
}
if (overrideLevelId != null)
{
partExportLevel = overrideLevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement));
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement));
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
string defaultValue = null;
// This replicates old functionality before IFC4 addition, where the default for slab was "FLOOR".
// Really the export layer table should be fixed for this case.
if (string.IsNullOrWhiteSpace(ifcEnumType) && hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
ifcEnumType = IFCValidateEntry.GetValidIFCType(hostElement, ifcEnumType, defaultValue);
switch (exportType)
{
case IFCExportType.IfcColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType, null);
break;
case IFCExportType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcSlab:
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null);
break;
}
}
bool containedInLevel = (standaloneExport || asBuildingElement);
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
/// <param name="placementSetter"></param>
/// <param name="originalPlacement"></param>
/// <param name="range"></param>
/// <param name="ifcExtrusionAxes"></param>
/// <param name="hostElement">The host of the part. This can be null.</param>
/// <param name="overrideLevelId">The id of the level that the part is one, overridding other sources.</param>
/// <param name="asBuildingElement">If true, export the Part as a building element instead of an IfcElementPart.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
// We don't know how to export a part as a building element if we don't know it's host.
if (asBuildingElement && (hostElement == null))
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementPart;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
else
{
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null || asBuildingElement;
ElementId partExportLevelId = (overrideLevelId != null) ? overrideLevelId : null;
if (partExportLevelId == null && standaloneExport)
{
partExportLevelId = partElement.LevelId;
}
if (partExportLevelId == null)
{
if (hostElement == null || (part.OriginalCategoryId != hostElement.Category.Id))
{
return;
}
partExportLevelId = hostElement.LevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevelId))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport)
{
Transform orientationTrf = Transform.Identity;
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, partElement, out overrideContainerHnd);
if (overrideContainerId != ElementId.InvalidElementId && (partExportLevelId == null || partExportLevelId == ElementId.InvalidElementId))
{
partExportLevelId = overrideContainerId;
}
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevelId, overrideContainerHnd);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
//partPlacement = ExporterUtil.CreateLocalPlacement(file, null, null);
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = new List <Solid>();;
IList <Mesh> meshes = new List <Mesh>();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(partElement.Document, exporterIFC, solidMeshInfo.GetSolids(), solidMeshInfo.GetMeshes());
foreach (GeometryObject gObj in gObjs)
{
if (gObj is Solid)
{
solids.Add(gObj as Solid);
}
else if (gObj is Mesh)
{
meshes.Add(gObj as Mesh);
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep);
}
else
{
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcColumn:
ifcPart = IFCInstanceExporter.CreateColumn(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType, null);
break;
case IFCEntityType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcSlab:
{
// TODO: fix this elsewhere.
if (ExporterUtil.IsNotDefined(ifcEnumType))
{
if (hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
else if (hostCatId == new ElementId(BuiltInCategory.OST_Roofs))
{
ifcEnumType = "ROOF";
}
}
ifcPart = IFCInstanceExporter.CreateSlab(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
}
break;
case IFCEntityType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, exportType.ValidatedPredefinedType);
break;
}
}
bool containedInLevel = standaloneExport;
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel, exportType);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevelId, standaloneExport ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(null);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcBuildingElementProxy", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(null);
}
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle buildingElementProxy = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(element, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(element, null);
string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(file, guid,
ownerHistory, name, description, objectType, localPlacement, representation, elementTag, null);
productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true);
}
tr.Commit();
}
}
return(buildingElementProxy);
}
private static bool ExportGenericElementAsMappedItem(ExporterIFC exporterIFC,
Element element, GeometryElement geomElem, IFCExportInfoPair exportType,
ProductWrapper wrapper)
{
GeometryInstance geometryInstance = GetTheGeometryInstance(geomElem);
if (geometryInstance == null)
{
return(false);
}
GeometryElement exportGeometry = geometryInstance.GetSymbolGeometry();
if (exportGeometry == null)
{
return(false);
}
ElementId symbolId = geometryInstance.GetSymbolGeometryId()?.SymbolId ?? ElementId.InvalidElementId;
ElementType elementType = element.Document.GetElement(symbolId) as ElementType;
if (elementType == null)
{
return(false);
}
Transform originalTrf = geometryInstance.Transform;
// Can't handle mirrored transforms yet.
if (originalTrf.HasReflection)
{
return(false);
}
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
IFCFile file = exporterIFC.GetFile();
IList <Transform> repMapTrfList = new List <Transform>();
BodyData bodyData = null;
FamilyTypeInfo typeInfo = new FamilyTypeInfo();
IFCExtrusionCreationData extraParams = typeInfo.extraParams;
Transform offsetTransform = Transform.Identity;
// We will create a new mapped type if we haven't already created the type.
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.FamilySymbolToTypeInfoCache.Find(symbolId, false, exportType);
bool found = currentTypeInfo.IsValid();
if (!found)
{
IList <IFCAnyHandle> representations3D = new List <IFCAnyHandle>();
IFCAnyHandle dummyPlacement = ExporterUtil.CreateLocalPlacement(file, null, null);
extraParams.SetLocalPlacement(dummyPlacement);
using (TransformSetter trfSetter = TransformSetter.Create())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(false, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
bodyData = BodyExporter.ExportBody(exporterIFC, element, categoryId,
ExporterUtil.GetSingleMaterial(element), exportGeometry,
bodyExporterOptions, extraParams);
typeInfo.MaterialIdList = bodyData.MaterialIds;
offsetTransform = bodyData.OffsetTransform;
// This code does not handle openings yet.
// The intention for this is FabricationParts and DirectShapes which do not
// currently have opening.
// If they can have openings in the future, we can add this.
IFCAnyHandle bodyRepHnd = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRepHnd) || extraParams.GetOpenings().Count > 0)
{
return(false);
}
representations3D.Add(bodyRepHnd);
repMapTrfList.Add(null);
}
typeInfo.StyleTransform = ExporterIFCUtils.GetUnscaledTransform(exporterIFC,
extraParams.GetLocalPlacement());
IFCAnyHandle typeStyle = FamilyInstanceExporter.CreateTypeEntityHandle(exporterIFC,
ref typeInfo, null, representations3D, repMapTrfList, null,
element, elementType, elementType, false, false,
exportType, out HashSet <IFCAnyHandle> propertySets);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(typeStyle))
{
wrapper.RegisterHandleWithElementType(elementType, exportType, typeStyle,
propertySets);
typeInfo.Style = typeStyle;
CategoryUtil.TryToCreateMaterialAssocation(exporterIFC, bodyData, elementType,
element, exportGeometry, typeStyle, typeInfo);
// Create other generic classification from ClassificationCode(s)
ClassificationUtil.CreateClassification(exporterIFC, file, elementType, typeStyle);
ClassificationUtil.CreateUniformatClassification(exporterIFC, file, elementType, typeStyle);
}
}
if (found && !typeInfo.IsValid())
{
typeInfo = currentTypeInfo;
}
// we'll pretend we succeeded, but we'll do nothing.
if (!typeInfo.IsValid())
{
return(false);
}
extraParams = typeInfo.extraParams;
// We expect no openings, so always add to map.
ExporterCacheManager.FamilySymbolToTypeInfoCache.Register(symbolId, false, exportType, typeInfo);
XYZ scaledMapOrigin = XYZ.Zero;
Transform scaledTrf = originalTrf.Multiply(typeInfo.StyleTransform);
// create instance.
IList <IFCAnyHandle> shapeReps = FamilyInstanceExporter.CreateShapeRepresentations(exporterIFC,
file, element, categoryId, typeInfo, scaledMapOrigin);
if (shapeReps == null)
{
return(false);
}
Transform boundingBoxTrf = (offsetTransform != null) ? offsetTransform.Inverse : Transform.Identity;
boundingBoxTrf = boundingBoxTrf.Multiply(scaledTrf.Inverse);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geomElem, boundingBoxTrf);
if (boundingBoxRep != null)
{
shapeReps.Add(boundingBoxRep);
}
IFCAnyHandle repHnd = (shapeReps.Count > 0) ? IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps) : null;
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, scaledTrf, null))
{
IFCAnyHandle instanceHandle = null;
IFCAnyHandle localPlacement = setter.LocalPlacement;
bool materialAlreadyAssociated = false;
// We won't create the instance if:
// (1) we are exporting to CV2.0/RV, (2) we have no 2D, 3D, or bounding box geometry, and (3) we aren't exporting parts.
if (!(repHnd == null &&
(ExporterCacheManager.ExportOptionsCache.ExportAsCoordinationView2 ||
ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)))
{
string instanceGUID = GUIDUtil.CreateGUID(element);
bool isChildInContainer = element.AssemblyInstanceId != ElementId.InvalidElementId;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
bool isBuildingElementProxy =
((exportType.ExportInstance == IFCEntityType.IfcBuildingElementProxy) ||
(exportType.ExportType == IFCEntityType.IfcBuildingElementProxyType));
ElementId roomId = setter.UpdateRoomRelativeCoordinates(element,
out IFCAnyHandle localPlacementToUse);
bool containedInSpace = (roomId != ElementId.InvalidElementId) && (exportType.ExportInstance != IFCEntityType.IfcSystemFurnitureElement);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
if (!isBuildingElementProxy)
{
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, element, instanceGUID,
ownerHistory, localPlacementToUse, repHnd);
}
else
{
instanceHandle = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, element, instanceGUID,
ownerHistory, localPlacementToUse, repHnd, exportType.ValidatedPredefinedType);
}
bool associateToLevel = !containedInSpace && !isChildInContainer;
wrapper.AddElement(element, instanceHandle, setter, extraParams, associateToLevel, exportType);
if (containedInSpace)
{
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, instanceHandle);
}
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
if (ElementFilteringUtil.IsMEPType(exportType) || ElementFilteringUtil.ProxyForMEPType(element, exportType))
{
ExporterCacheManager.MEPCache.Register(element, instanceHandle);
}
ExporterCacheManager.HandleToElementCache.Register(instanceHandle, element.Id);
if (!materialAlreadyAssociated)
{
// Create material association for the instance only if the the istance geometry is different from the type
// or the type does not have any material association
IFCAnyHandle constituentSetHnd = ExporterCacheManager.MaterialSetCache.FindConstituentSetHnd(symbolId);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(constituentSetHnd) &&
bodyData != null && bodyData.RepresentationItemInfo != null && bodyData.RepresentationItemInfo.Count > 0)
{
CategoryUtil.CreateMaterialAssociationWithShapeAspect(exporterIFC, element, instanceHandle, bodyData.RepresentationItemInfo);
}
else
{
// Create material association in case if bodyData is null
CategoryUtil.CreateMaterialAssociation(exporterIFC, instanceHandle, typeInfo.MaterialIdList);
}
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(typeInfo.Style))
{
ExporterCacheManager.TypeRelationsCache.Add(typeInfo.Style, instanceHandle);
}
}
}
}
return(true);
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
IFCPlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
IFCPlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (overrideLevelId != null)
{
partExportLevel = overrideLevelId;
}
else if (standaloneExport || asBuildingElement)
{
if (partElement.Level != null)
{
partExportLevel = partElement.Level.Id;
}
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
{
return;
}
partExportLevel = hostElement.Level.Id;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = IFCPlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.GetPlacement();
}
else
{
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string partGUID = GUIDUtil.CreateGUID(partElement);
string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement));
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement));
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
}
else
{
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
switch (exportType)
{
case IFCExportType.ExportColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
break;
case IFCExportType.ExportCovering:
IFCCoveringType coveringType = CeilingExporter.GetIFCCoveringType(hostElement, ifcEnumType);
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, coveringType);
break;
case IFCExportType.ExportFooting:
IFCFootingType footingType = FootingExporter.GetIFCFootingType(hostElement, ifcEnumType);
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, footingType);
break;
case IFCExportType.ExportRoof:
IFCRoofType roofType = RoofExporter.GetIFCRoofType(ifcEnumType);
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, roofType);
break;
case IFCExportType.ExportSlab:
IFCSlabType slabType = FloorExporter.GetIFCSlabType(ifcEnumType);
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, slabType);
break;
case IFCExportType.ExportWall:
ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null);
break;
}
}
bool containedInLevel = (standaloneExport || asBuildingElement);
IFCPlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociations(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
