public Dovetail(string _id, string _path1, string _path2, int _numtails, Inches _tailwidth_specified, CompoundSolid _cs1, Solid _s1, Face _f1, HalfEdge _he1, CompoundSolid _cs2, Solid _s2, Face _f2, HalfEdge _he2)
{
id = _id;
path1 = _path1;
path2 = _path2;
orig_cs1 = _cs1;
orig_cs2 = _cs2;
numtails = _numtails;
boardwidth = _he1.Length();
if (fp.eq_inches(_tailwidth_specified, 0))
{
tailwidth_bottom = boardwidth / (numtails * 2);
gapwidth_bottom = tailwidth_bottom;
}
else
{
tailwidth_bottom = _tailwidth_specified;
gapwidth_bottom = (boardwidth - numtails * tailwidth_bottom) / (numtails);
}
gapwidth_top = gapwidth_bottom - 2 * (tailwidth_bottom / slope);
tailwidth_top = tailwidth_bottom + 2 * (tailwidth_bottom / slope);
}
public static void FindActualEdge(HalfEdge he, out HalfEdge he1, out double length)
{
EdgeLoop el = he.face.GetEdgeLoopFor(he);
int ndx = el.IndexOf(he);
while (true)
{
HalfEdge h = el[el.FixIndex(ndx - 1)];
if (ut.PointsAreCollinear3d(h.from, h.to, he.to))
{
ndx--;
}
else
{
break;
}
}
he1 = el[ndx];
double len = he1.Length();
while (true)
{
HalfEdge h = el[++ndx];
if (ut.PointsAreCollinear3d(he1.from, he1.to, h.to))
{
len += h.Length();
}
else
{
break;
}
}
length = len;
}
private static void CreateFaceLabel(Viewport3D myVP, Face f, TranslateTransform3D ttmove)
{
HalfEdge he = f.FindLongestEdge();
xyz p1 = he.Center();
xyz p2 = f.Measure(he, p1);
xyz v = p2 - p1;
double dist = v.magnitude();
xyz c = p1 + v / 2;
c += f.UnitNormal() * .001;
Point3D center = wpfmisc.fixPoint(c);
Vector3D over = wpfmisc.fixVector(he.UnitVector());
Vector3D up = wpfmisc.fixVector(he.GetInwardNormal());
double height;
if (dist <= 1)
{
height = dist / 3;
}
else if (dist < 10)
{
height = 1;
}
else
{
height = 2;
}
// TODO the following isn't a very pretty hack
if (f.name.Length * height > he.Length())
{
height = he.Length() / f.name.Length;
}
ModelVisual3D mv3d = wpfmisc.CreateTextLabel3D(f.name, Brushes.Black, false, height, center, over, up);
if (ttmove != null)
{
mv3d.Transform = ttmove;
}
myVP.Children.Add(mv3d);
}
public static CompoundSolid Tenon(CompoundSolid sol, HalfEdge he, xy pos, xyz size, string id)
{
Face f = he.face;
EdgeLoop el = he.face.GetEdgeLoopFor(he);
int ndx = el.IndexOf(he);
ndx--;
if (ndx < 0)
{
ndx += el.Count;
}
HalfEdge prevHe = el[ndx];
if (!fp.eq_inches(pos.y, 0))
{
Solid cut = CreateCutter_Box(id, he, new xy(0, 0), new xyz(he.Length(), pos.y, size.z),
new string[] { "NA_1", "NA_2", "NA_3", "frontshoulder", "NA_4", "front" });
sol = bool3d.Subtract(sol, cut);
}
if (!fp.eq_inches(pos.x, 0))
{
Solid cut = CreateCutter_Box(id, he, new xy(0, pos.y), new xyz(pos.x, size.y, size.z),
new string[] { "NA_1", "left", "NA_2", "leftshoulder", "NA_3", "NA_4" });
sol = bool3d.Subtract(sol, cut);
}
if ((pos.y + size.y) < prevHe.Length())
{
Solid cut = CreateCutter_Box(id, he, new xy(0, pos.y + size.y), new xyz(he.Length(), prevHe.Length() - (pos.y + size.y), size.z),
new string[] { "NA_1", "NA_2", "NA_3", "backshoulder", "back", "NA_4" });
sol = bool3d.Subtract(sol, cut);
}
if ((pos.x + size.x) < he.Length())
{
Solid cut = CreateCutter_Box(id, he, new xy((pos.x + size.x), pos.y), new xyz(he.Length() - (pos.x + size.x), size.y, size.z),
new string[] { "NA_1", "NA_2", "right", "rightshoulder", "NA_3", "NA_4" });
sol = bool3d.Subtract(sol, cut);
}
return(sol);
}
public void test_measure()
{
Solid s = wood.CreateBoard(BoardMaterial.Find(BoardMaterial.SOLID_OAK_RED), "a", 10, 24, 1);
Face f = s.FindFace("top");
HalfEdge he = f.FindLongestEdge();
Assert.IsTrue(fp.eq_inches(24, he.Length()));
xyz p1 = he.Center();
xyz p2 = f.Measure(he, p1);
xyz q = p2 - p1;
Assert.IsTrue(fp.eq_inches(10, q.magnitude()));
CompoundSolid cs = wood.Mortise(s.ToCompoundSolid(), he, new xy(3, 3), new xyz(18, 4, 2), "m1");
f = cs.FindFace("a.top");
Assert.AreEqual(2, f.loops.Count);
he = f.FindLongestEdge();
Assert.IsTrue(fp.eq_inches(24, he.Length()));
p1 = he.Center();
p2 = f.Measure(he, p1);
q = p2 - p1;
Assert.IsTrue(fp.eq_inches(3, q.magnitude()));
}
public static CompoundSolid Dado(CompoundSolid sol, HalfEdge heParallel, Inches distFromParallelEdge, Inches width, Inches depth, string id)
{
Face f = heParallel.face;
string[] fnames = new string[] {
"top",
"right",
"left",
"bottom",
"side_above",
"side_below"
};
// TODO should we move left or right further? what if the dado needs to be longer than this edge? or shorter?
Solid cutter = CreateCutter_Box(id, heParallel, new xy(0, distFromParallelEdge), new xyz(heParallel.Length(), width, depth), fnames);
return(bool3d.Subtract(sol, cutter));
}
