private static void AddGrindSurface()
{
foreach (var o in Selection.gameObjects)
{
var surface = o.GetComponent <GrindSurface>();
if (surface == null)
{
surface = o.AddComponent <GrindSurface>();
}
else
{
surface.DestroySplines();
}
if (GrindSurface.AutoGenerateNewSuraces)
{
GrindSplineGenerator.Generate(surface,
new ColliderGenerationSettings()
{
IsEdge = EditorPrefs.GetBool("gsDefault_IsEdge"),
AutoDetectEdgeAlignment = EditorPrefs.GetBool("gsDefault_AutoDetectEdgeAlignment"),
ColliderType = (ColliderGenerationSettings.ColliderTypes)EditorPrefs.GetInt("gsDefault_ColliderType")
});
}
}
}
public override void OnInspectorGUI()
{
serializedObject.UpdateIfRequiredOrScript();
if (grindSurface.GetComponent <GrindSpline>() != null)
{
EditorGUILayout.HelpBox("Found GrindSpline on this GameObject. This is not supported. Please remove the GrindSpline or this component.", MessageType.Error);
GUI.enabled = false;
}
EditorGUI.BeginChangeCheck();
EditorGUILayout.Space();
// ---------------------------- Splines
EditorGUILayout.BeginVertical(new GUIStyle("box"));
{
EditorGUILayout.LabelField("Splines", EditorStyles.boldLabel);
EditorGUILayout.BeginHorizontal();
if (GUILayout.Button("Add GrindSpline"))
{
CreateSpline();
serializedObject.UpdateIfRequiredOrScript();
}
drawSplines = GUILayout.Toggle(drawSplines, new GUIContent("Draw GrindSplines"), new GUIStyle("button"));
EditorGUILayout.EndHorizontal();
if (GUILayout.Button("Generate Splines"))
{
if (grindSurface.Splines.Count == 0 || EditorUtility.DisplayDialog("Confirm", "Are you sure? This cannot be undone", "Yes", "No!"))
{
grindSurface.DestroySplines();
GrindSplineGenerator.Generate(grindSurface);
serializedObject.UpdateIfRequiredOrScript();
return;
}
}
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(serializedObject.FindProperty("Splines"), true);
EditorGUI.indentLevel--;
}
EditorGUILayout.EndVertical();
// ---------------------------- Colliders
EditorGUILayout.BeginVertical(new GUIStyle("box"));
{
EditorGUILayout.LabelField("Colliders", EditorStyles.boldLabel);
if (GUILayout.Button("Generate Colliders"))
{
grindSurface.GenerateColliders();
}
EditorGUILayout.Separator();
EditorGUILayout.PropertyField(serializedObject.FindProperty("ColliderType"));
if (grindSurface.ColliderType == GrindSurface.ColliderTypes.Capsule)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("GeneratedColliderRadius"));
}
else
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("GeneratedColliderWidth"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("GeneratedColliderDepth"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("IsEdge"));
if (serializedObject.FindProperty("IsEdge").boolValue)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("AutoDetectEdgeAlignment"));
if (serializedObject.FindProperty("AutoDetectEdgeAlignment").boolValue == false)
{
EditorGUILayout.PropertyField(serializedObject.FindProperty("FlipEdge"));
}
}
}
EditorGUILayout.PropertyField(serializedObject.FindProperty("ColliderContainer"));
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(serializedObject.FindProperty("GeneratedColliders"), true);
EditorGUI.indentLevel--;
if (EditorGUI.EndChangeCheck())
{
serializedObject.ApplyModifiedProperties();
}
}
EditorGUILayout.EndVertical();
if (GUILayout.Button("Destroy & Reset"))
{
if (EditorUtility.DisplayDialog("Confirm", "Are you sure? This cannot be undone", "Yes", "No!"))
{
grindSurface.DestroySplines();
serializedObject.UpdateIfRequiredOrScript();
return;
}
}
GUI.enabled = true;
}
public override void OnInspectorGUI()
{
serializedObject.UpdateIfRequiredOrScript();
if (grindSurface.GetComponent <GrindSpline>() != null)
{
EditorGUILayout.HelpBox("Found GrindSpline on this GameObject. This is not supported. Please remove the GrindSpline or this component.", MessageType.Error);
GUI.enabled = false;
}
EditorGUI.BeginChangeCheck();
EditorGUILayout.Space();
// ---------------------------- Splines
EditorGUILayout.BeginVertical(new GUIStyle("box"));
{
EditorGUILayout.LabelField("Splines", EditorStyles.boldLabel);
EditorGUILayout.BeginHorizontal();
{
if (GUILayout.Button("Add GrindSpline"))
{
CreateSpline();
serializedObject.UpdateIfRequiredOrScript();
}
drawSplines = GUILayout.Toggle(drawSplines, new GUIContent("Draw GrindSplines"), new GUIStyle("button"));
}
EditorGUILayout.EndHorizontal();
EditorGUILayout.Separator();
EditorGUILayout.BeginVertical();
{
EditorGUILayout.LabelField("Default Spline Settings:");
EditorGUILayout.PropertyField(serializedObject.FindProperty("SurfaceType"));
EditorGUILayout.PropertyField(serializedObject.FindProperty("IsRound"));
}
EditorGUILayout.EndVertical();
EditorGUILayout.Separator();
GUI.enabled = grindSurface.Splines.Count > 0;
if (GUILayout.Button("Generate All Colliders"))
{
if (EditorUtility.DisplayDialog("Confirm", "Are you sure? This cannot be undone", "Yes", "No!"))
{
EditorCoroutineUtility.StartCoroutineOwnerless(GenerateSplinesColliders());
}
}
if (GUILayout.Button("Generate All Colliders (Use Generation Settings)"))
{
if (EditorUtility.DisplayDialog("Confirm", "Are you sure? This cannot be undone", "Yes", "No!"))
{
EditorCoroutineUtility.StartCoroutineOwnerless(GenerateSplinesColliders(grindSurface.ColliderGenerationSettings));
}
}
if (GUILayout.Button("Destroy All & Reset"))
{
if (EditorUtility.DisplayDialog("Confirm", "Are you sure? This cannot be undone", "Yes", "No!"))
{
grindSurface.DestroySplines();
serializedObject.UpdateIfRequiredOrScript();
return;
}
}
GUI.enabled = true;
var splines_arr = serializedObject.FindProperty("Splines");
if (splines_arr.arraySize > 0)
{
EditorGUILayout.BeginVertical(new GUIStyle("box"));
{
for (int i = 0; i < splines_arr.arraySize; i++)
{
var e = splines_arr.GetArrayElementAtIndex(i);
var spline = (GrindSpline)e.objectReferenceValue;
EditorGUILayout.BeginHorizontal();
EditorGUILayout.ObjectField(spline, typeof(GrindSpline), true);
if (GUILayout.Button("Generate Colliders"))
{
if (EditorUtility.DisplayDialog("Confirm", "Are you sure? This cannot be undone", "Yes", "No!"))
{
spline.GenerateColliders();
}
}
EditorGUILayout.EndHorizontal();
}
}
EditorGUILayout.EndVertical();
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(new GUIStyle("box"));
{
EditorGUILayout.LabelField("GrindSpline Generation (Experimental)", EditorStyles.boldLabel);
EditorGUILayout.HelpBox("Spline generation is an experimental feature and not yet yielding good results for complex objects. It's pretty good at basic ledges, hubbas, etc.", MessageType.Info, true);
EditorGUI.indentLevel++;
EditorGUILayout.PropertyField(serializedObject.FindProperty("ColliderGenerationSettings"), true);
EditorGUI.indentLevel--;
if (GUILayout.Button("Generate Splines"))
{
if (grindSurface.Splines.Count == 0 || EditorUtility.DisplayDialog("Confirm", "Are you sure? This cannot be undone", "Yes", "No!"))
{
grindSurface.DestroySplines();
GrindSplineGenerator.Generate(grindSurface, grindSurface.ColliderGenerationSettings);
serializedObject.UpdateIfRequiredOrScript();
return;
}
}
}
EditorGUILayout.EndVertical();
GUI.enabled = true;
if (EditorGUI.EndChangeCheck())
{
serializedObject.ApplyModifiedProperties();
}
}
private void OnGUI()
{
EditorGUILayout.BeginVertical(containerStyle);
{
EditorGUILayout.BeginVertical(new GUIStyle("box"));
{
EditorGUI.BeginChangeCheck();
EditorGUILayout.LabelField("Default Surface Settings", EditorStyles.boldLabel);
gsDefault_IsEdge = EditorGUILayout.Toggle("Is Edge", gsDefault_IsEdge);
gsDefault_AutoDetectEdgeAlignment = EditorGUILayout.Toggle("Auto Edge Alignment", gsDefault_AutoDetectEdgeAlignment);
gsDefault_ColliderType = (GrindSurface.ColliderTypes)EditorGUILayout.EnumPopup("Collider Type", gsDefault_ColliderType);
if (EditorGUI.EndChangeCheck())
{
EditorPrefs.SetBool(nameof(gsDefault_IsEdge), gsDefault_IsEdge);
EditorPrefs.SetBool(nameof(gsDefault_AutoDetectEdgeAlignment), gsDefault_AutoDetectEdgeAlignment);
EditorPrefs.SetInt(nameof(gsDefault_ColliderType), (int)gsDefault_ColliderType);
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(new GUIStyle("box"));
{
EditorGUILayout.LabelField("Generation Settings", EditorStyles.boldLabel);
EditorGUI.BeginChangeCheck();
settings_PointTestOffset = EditorGUILayout.FloatField("PointTestOffset", settings_PointTestOffset);
settings_PointTestRadius = EditorGUILayout.FloatField("PointTestRadius", settings_PointTestRadius);
settings_MaxHorizontalAngle = EditorGUILayout.FloatField("MaxHorizontalAngle", settings_MaxHorizontalAngle);
settings_MaxSlope = EditorGUILayout.FloatField("MaxSlope", settings_MaxSlope);
if (EditorGUI.EndChangeCheck())
{
EditorPrefs.SetFloat(nameof(settings_PointTestOffset), settings_PointTestOffset);
EditorPrefs.SetFloat(nameof(settings_PointTestRadius), settings_PointTestRadius);
EditorPrefs.SetFloat(nameof(settings_MaxHorizontalAngle), settings_MaxHorizontalAngle);
EditorPrefs.SetFloat(nameof(settings_MaxSlope), settings_MaxSlope);
GrindSplineGenerator.PointTestOffset = settings_PointTestOffset;
GrindSplineGenerator.PointTestRadius = settings_PointTestRadius;
GrindSplineGenerator.MaxHorizontalAngle = settings_MaxHorizontalAngle;
GrindSplineGenerator.MaxSlope = settings_MaxSlope;
}
}
EditorGUILayout.EndVertical();
EditorGUILayout.BeginVertical(new GUIStyle("box"));
{
EditorGUILayout.LabelField("Selected Object", Selection.activeGameObject?.name);
if (Selection.activeGameObject != null)
{
var box_col = Selection.activeGameObject.GetComponent <BoxCollider>();
if (box_col != null && box_col.transform.parent.GetComponent <GrindSurface>())
{
if (GUILayout.Button("Flip Edge Collider Offset"))
{
var c = box_col.center;
c.x = c.x * -1f;
box_col.center = c;
}
}
else
{
var surface = Selection.activeGameObject.GetComponent <GrindSurface>() ?? Selection.activeGameObject.transform.GetComponentInParent <GrindSurface>();
if (surface == null)
{
EditorGUILayout.LabelField($"<i>No GrindSurface found</i>", new GUIStyle("label")
{
richText = true
});
if (GUILayout.Button("Generate Grind Surface"))
{
surface = Selection.activeGameObject.AddComponent <GrindSurface>();
surface.IsEdge = gsDefault_IsEdge;
surface.AutoDetectEdgeAlignment = gsDefault_AutoDetectEdgeAlignment;
surface.ColliderType = gsDefault_ColliderType;
GrindSplineGenerator.Generate(surface);
}
}
else
{
EditorGUILayout.LabelField($"GrindSurface found!", new GUIStyle("label")
{
richText = true
});
}
}
}
}
EditorGUILayout.EndVertical();
}
EditorGUILayout.EndVertical();
}
