void DoDemo()
{
Inventor.Application InvApp = AdnInventorUtilities.InvApplication;
//Create new interaction event
_interactionEvents = InvApp.CommandManager.CreateInteractionEvents();
//Store mouse events
_mouseEvents = _interactionEvents.MouseEvents;
//Enable mouse move. This is disabled by default for performance reasons
_mouseEvents.MouseMoveEnabled = true;
//Listen to OnMouseMove event
_mouseEvents.OnMouseMove +=
new MouseEventsSink_OnMouseMoveEventHandler(MouseEvents_OnMouseMove);
_interactionEvents.StatusBarText = "Select triangle vertex: ";
//Retrieve InteractionGraphics
InteractionGraphics ig = _interactionEvents.InteractionGraphics;
//Create new node
GraphicsNode node = ig.OverlayClientGraphics.AddNode(1);
//Add Triangle primitive
_triangleGraph = node.AddTriangleGraphics();
//Set up coordinates
GraphicsCoordinateSet coordSet = ig.GraphicsDataSets.CreateCoordinateSet(1);
double[] coords = new double[]
{
0.0, 0.0, 0.0, //vertex 1
5.0, 0.0, 0.0, //vertex 2
2.5, 5.0, 0.0 //vertex 3
};
coordSet.PutCoordinates(ref coords);
_triangleGraph.CoordinateSet = coordSet;
_interactionEvents.Start();
}
public TriangleGraphics DrawTriangle(
double[] v1,
double[] v2,
double[] v3,
GraphicsNode node)
{
try
{
AdnGraphics graphicsData = WorkingGraphics;
if (node == null)
{
node = graphicsData.ClientGraphics.AddNode(
graphicsData.GetGraphicNodeFreeId());
}
TriangleGraphics graphic = node.AddTriangleGraphics();
if ((v1 != null) && (v2 != null) && (v3 != null))
{
GraphicsCoordinateSet coordSet =
graphicsData.GraphicsDataSets.CreateCoordinateSet(
graphicsData.GetDataSetFreeId());
List <double> coordinates = new List <double>();
coordinates.AddRange(v1);
coordinates.AddRange(v2);
coordinates.AddRange(v3);
double[] coordsArray = coordinates.ToArray();
coordSet.PutCoordinates(ref coordsArray);
graphic.CoordinateSet = coordSet;
}
return(graphic);
}
catch
{
return(null);
}
}
public TriangleGraphics DrawTriangle(
double[] v1,
double[] v2,
double[] v3,
GraphicsNode node)
{
try
{
AdnGraphics graphicsData = WorkingGraphics;
if (node == null)
{
node = graphicsData.ClientGraphics.AddNode(
graphicsData.GetGraphicNodeFreeId());
}
TriangleGraphics graphic = node.AddTriangleGraphics();
if ((v1 != null) && (v2 != null) && (v3 != null))
{
GraphicsCoordinateSet coordSet =
graphicsData.GraphicsDataSets.CreateCoordinateSet(
graphicsData.GetDataSetFreeId());
List<double> coordinates = new List<double>();
coordinates.AddRange(v1);
coordinates.AddRange(v2);
coordinates.AddRange(v3);
double[] coordsArray = coordinates.ToArray();
coordSet.PutCoordinates(ref coordsArray);
graphic.CoordinateSet = coordSet;
}
return graphic;
}
catch
{
return null;
}
}
//////////////////////////////////////////////////////////////////////////////////////////////
// Simple example using Inventor API directly
//
//////////////////////////////////////////////////////////////////////////////////////////////
public static void ClientFeatureDemo()
{
string clientId = AdnInventorUtilities.AddInGuid;
Inventor.Application InvApp = AdnInventorUtilities.InvApplication;
Document document = InvApp.ActiveDocument;
// We will use late binding to retrieve ClientFeatures collection,
// so we dont need to write specific code for PartDocument and
// AssemblyDocument
ComponentDefinition compDef =
AdnInventorUtilities.GetCompDefinition(document);
object features =
AdnInventorUtilities.GetProperty(compDef, "Features");
ClientFeatures clientFeatures =
AdnInventorUtilities.GetProperty(features, "ClientFeatures")
as ClientFeatures;
ClientFeatureDefinition cfDef =
clientFeatures.CreateDefinition("Graphics Feature", null, null, null);
ClientFeature clientFeature =
clientFeatures.Add(cfDef, clientId);
NativeBrowserNodeDefinition nodeDef =
clientFeature.BrowserNode.BrowserNodeDefinition as NativeBrowserNodeDefinition;
stdole.IPictureDisp pic =
PictureDispConverter.ToIPictureDisp(Resources.PointImage);
ClientNodeResource res =
document.BrowserPanes.ClientNodeResources.Add(
clientId,
document.BrowserPanes.ClientNodeResources.Count + 1,
pic);
nodeDef.OverrideIcon = res;
cfDef = clientFeature.Definition;
cfDef.HighlightClientGraphicsWithFeature = true;
GraphicsDataSets sets =
cfDef.GraphicsDataSetsCollection.Add2(clientId, true);
GraphicsCoordinateSet coordSet = sets.CreateCoordinateSet(1);
double[] coords = new double[]
{
0.0, 0.0, 0.0,
5.0, 0.0, 0.0,
2.5, 5.0, 0.0
};
coordSet.PutCoordinates(ref coords);
ClientGraphics cg =
cfDef.ClientGraphicsCollection.Add(clientId);
GraphicsNode node = cg.AddNode(1);
node.RenderStyle = document.RenderStyles["Green (Flat)"];
TriangleGraphics primitive = node.AddTriangleGraphics();
primitive.CoordinateSet = coordSet;
InvApp.ActiveView.Update();
}
/// <summary>
/// Simplifies the mesh provided, then places it back into the parameters.
/// </summary>
/// <remarks>
/// Repeatedly remove the shortest edge in the mesh, reducing the triangle count by two each step. This is repeated
/// until the triangle count is low enough or more than 2000 tries have been made.
/// </remarks>
/// <param name="verts">The original and final verticies. (3 elements per vertex)</param>
/// <param name="vertCount">The original and final vertex counts.</param>
/// <param name="inds">The original and final index buffer. (3 element per triangle, zero based)</param>
/// <param name="trisCount">The original and final triangle counts.</param>
private static void Simplify(ref float[] verts, ref uint vertCount, ref uint[] inds, ref uint trisCount)
{
// Setup edge relations, compute min edge lengths...
List <SimplificationVertex> simplVerts = new List <SimplificationVertex>();
for (int i = 0; i < vertCount; i++)
{
simplVerts.Add(new SimplificationVertex(verts[i * 3], verts[i * 3 + 1], verts[i * 3 + 2]));
}
List <SimplificationFace> simplFace = new List <SimplificationFace>();
for (int i = 0; i < trisCount * 3; i += 3)
{
SimplificationFace face = new SimplificationFace();
face.verts[0] = simplVerts[(int)inds[i]];
face.verts[1] = simplVerts[(int)inds[i + 1]];
face.verts[2] = simplVerts[(int)inds[i + 2]];
foreach (SimplificationVertex v in face.verts)
{
v.faces.Add(face); // Make sure all verticies know their neighbors
}
simplFace.Add(face);
}
foreach (SimplificationFace face in simplFace)
{
face.updateInfo();
}
simplFace.Sort();
#region FANCY_SIMPLIFY_GRAPHICS
#if FANCY_SIMPLIFY_GRAPHICS
double[] major, minor;
GraphicsCoordinateSet majorCoordSet, minorCoordSet;
major = new double[9 * simplFace.Count];
for (int a = 0; a < simplFace.Count; a++)
{
int off = a * 9;
simplFace[a].tmpHead = off;
Array.Copy(simplFace[a].verts[0].pos, 0, major, off, 3);
Array.Copy(simplFace[a].verts[1].pos, 0, major, off + 3, 3);
Array.Copy(simplFace[a].verts[2].pos, 0, major, off + 6, 3);
}
minor = new double[9];
AssemblyDocument part = ((AssemblyDocument)Exporter.INVENTOR_APPLICATION.ActiveDocument);
GraphicsDataSets dataSets;
try
{
dataSets = part.GraphicsDataSetsCollection.AddNonTransacting("convexHULL");
}
catch
{
dataSets = part.GraphicsDataSetsCollection["convexHULL"];
dataSets.Delete();
dataSets = part.GraphicsDataSetsCollection.AddNonTransacting("convexHULL");
}
ClientGraphics graphics;
try
{
graphics = part.ComponentDefinition.ClientGraphicsCollection.AddNonTransacting("convexHULL");
}
catch
{
graphics = part.ComponentDefinition.ClientGraphicsCollection["convexHULL"];
graphics.Delete();
graphics = part.ComponentDefinition.ClientGraphicsCollection.AddNonTransacting("convexHULL");
}
{
GraphicsNode node = graphics.AddNode(graphics.Count + 1);
majorCoordSet =
dataSets.CreateCoordinateSet(dataSets.Count + 1);
majorCoordSet.PutCoordinates(major);
LineGraphics primitive = node.AddLineGraphics();
primitive.BurnThrough = false;
//Create Coordinate Index Set
GraphicsIndexSet indexSetCoords =
dataSets.CreateIndexSet(dataSets.Count + 1);
for (int i = 0; i < major.Length; i += 3)
{
indexSetCoords.Add(indexSetCoords.Count + 1, i + 1); //from point 1
indexSetCoords.Add(indexSetCoords.Count + 1, i + 2); //connect to point 2
indexSetCoords.Add(indexSetCoords.Count + 1, i + 2); //from point 2
indexSetCoords.Add(indexSetCoords.Count + 1, i + 3); //connect to point 3
indexSetCoords.Add(indexSetCoords.Count + 1, i + 3); //from point 3
indexSetCoords.Add(indexSetCoords.Count + 1, i + 1); //connect to point 1
}
primitive.CoordinateSet = majorCoordSet;
primitive.CoordinateIndexSet = indexSetCoords;
}
{
GraphicsNode node = graphics.AddNode(graphics.Count + 1);
minorCoordSet =
dataSets.CreateCoordinateSet(dataSets.Count + 1);
minorCoordSet.PutCoordinates(minor);
TriangleGraphics primitive = node.AddTriangleGraphics();
primitive.DepthPriority = 19999;
//Create Coordinate Index Set
GraphicsColorSet colorSet = dataSets.CreateColorSet(dataSets.Count + 1);
for (int i = 0; i < minor.Length; i += 3)
{
colorSet.Add(colorSet.Count + 1, 255, 0, 0);
}
primitive.CoordinateSet = minorCoordSet;
primitive.ColorSet = colorSet;
primitive.ColorBinding = ColorBindingEnum.kPerItemColors;
//primitive.CoordinateIndexSet = indexSetCoords;
}
Exporter.INVENTOR_APPLICATION.ActiveView.Update();
#endif
#endregion
// Time for shenanigans! We are going to naively pick the shortest edge and then remove it. Destroys two faces per loop typically.
// Give it 2000 tries at most.
for (int i = 0; i < 2000 && simplFace.Count > CONVEX_HULL_FACET_LIMIT; i++)
{
SimplificationFace bFace = simplFace[0];
// This is the edge to remove
SimplificationVertex[] remove = new SimplificationVertex[] {
bFace.verts[bFace.minEdge], bFace.verts[(bFace.minEdge + 1) % bFace.verts.Length]
};
#region FANCY_SIMPLIFY_GRAPHICS
#if FANCY_SIMPLIFY_GRAPHICS
// Highlight
Array.Copy(bFace.verts[0].pos, 0, minor, 0, 3);
Array.Copy(bFace.verts[1].pos, 0, minor, 3, 3);
Array.Copy(bFace.verts[2].pos, 0, minor, 6, 3);
minorCoordSet.PutCoordinates(minor);
Exporter.INVENTOR_APPLICATION.ActiveView.Update();
#endif
#endregion
// Find the center point of the edge. One edge -> one vertex
float[] center = new float[3];
foreach (SimplificationVertex vert in remove)
{
center[0] += vert.pos[0] / 2.0f;
center[1] += vert.pos[1] / 2.0f;
center[2] += vert.pos[2] / 2.0f;
vert.faces.Clear(); // Really, never use vertex again.
}
SimplificationVertex newVertex = new SimplificationVertex(center[0], center[1], center[2]);
// Ineffeciently check each face to see if it shares a vertex with the edge
for (int k = simplFace.Count - 1; k >= 0; k--)
{
int matched = 0;
SimplificationFace face = simplFace[k];
for (int j = 0; j < face.verts.Length; j++)
{
if (face.verts[j] == remove[0] ||
face.verts[j] == remove[1])
{
face.verts[j] = newVertex;
#region FANCY_SIMPLIFY_GRAPHICS
#if FANCY_SIMPLIFY_GRAPHICS
Array.Copy(face.verts[j].pos, 0, major, face.tmpHead + (3 * j), 3);
int index = (face.tmpHead / 3) + j + 1;
majorCoordSet.Remove(index);
majorCoordSet.Add(index, Exporter.INVENTOR_APPLICATION.TransientGeometry.CreatePoint(face.verts[j].pos[0], face.verts[j].pos[1], face.verts[j].pos[2]));
#endif
#endregion
if (matched == 0)
{
newVertex.faces.Add(face);
}
matched++;
}
}
// If we share at least two verts with the edge we are dead, since the triangle ends up with two
// of the same vertex
if (matched >= 2)
{
// Degenerate
simplFace.RemoveAt(k);
foreach (SimplificationVertex v in face.verts)
{
v.faces.Remove(face);
}
}
else if (matched == 1)
{
// We changed, so update edge lengths
face.updateInfo();
}
}
simplVerts.Add(newVertex);
// Resort by edge length
simplFace.Sort();
}
simplVerts.RemoveAll((vert) => vert.faces.Count <= 0);
// Rebuild arrays
vertCount = (uint)simplVerts.Count;
verts = new float[vertCount * 3];
for (int i = 0; i < simplVerts.Count; i++)
{
int off = i * 3;
simplVerts[i].finalIndex = (i); // Our indices are zero based <3
Array.Copy(simplVerts[i].pos, 0, verts, off, 3);
}
trisCount = (uint)simplFace.Count;
inds = new uint[trisCount * 3];
for (int i = 0; i < simplFace.Count; i++)
{
int off = i * 3;
inds[off] = (uint)simplFace[i].verts[0].finalIndex;
inds[off + 1] = (uint)simplFace[i].verts[1].finalIndex;
inds[off + 2] = (uint)simplFace[i].verts[2].finalIndex;
}
}
public void CreateMesh(NameValueMap nv)
{
var N = 512;
var T0 = DateTime.Now;
if (null != mGraphicsDataSets)
{
mGraphicsDataSets.Delete();
mGraphicsDataSets = null;
mGraphicsNode.Delete();
mGraphicsNode = null;
mApp.ActiveView.Update();
return;
}
var doc = mApp.ActiveDocument as PartDocument;
if (null == mClientGraphics)
{
mClientGraphics = doc.ComponentDefinition.ClientGraphicsCollection.Add("MyTest");
}
mGraphicsDataSets = doc.GraphicsDataSetsCollection.Add("MyTest");
var setupTimeSeconds = (DateTime.Now - T0).TotalSeconds;
T0 = DateTime.Now;
var msg = string.Format("N = {0}, {1} triangles\n", N, mNumTriangles)
+ string.Format("Inventor setup time: {0} sec\n", setupTimeSeconds);
T0 = DateTime.Now;
try
{
var dataSetsTimeSeconds = (DateTime.Now - T0).TotalSeconds;
T0 = DateTime.Now;
var gcs = mGraphicsDataSets.CreateCoordinateSet(1) as GraphicsCoordinateSet;
gcs.PutCoordinates(mVertices);
var coordSetSeconds = (DateTime.Now - T0).TotalSeconds;
T0 = DateTime.Now;
var gis = mGraphicsDataSets.CreateIndexSet(2) as GraphicsIndexSet;
gis.PutIndices(mIndices);
var indexSetSeconds = (DateTime.Now - T0).TotalSeconds;
T0 = DateTime.Now;
var gns = mGraphicsDataSets.CreateNormalSet(3) as GraphicsNormalSet;
gns.PutNormals(mNormals);
var normalSetSeconds = (DateTime.Now - T0).TotalSeconds;
T0 = DateTime.Now;
mGraphicsNode = mClientGraphics.AddNode(1) as GraphicsNode;
var triangles = mGraphicsNode.AddTriangleGraphics() as TriangleGraphics;
triangles.CoordinateSet = gcs;
triangles.CoordinateIndexSet = gis;
triangles.NormalSet = gns;
triangles.NormalBinding = NormalBindingEnum.kPerItemNormals;
triangles.NormalIndexSet = gis;
var trianglesSeconds = (DateTime.Now - T0).TotalSeconds;
bool inActiveDocument;
var brassAsset = GetAsset("Brass - Satin", out inActiveDocument);
if (null != brassAsset)
{
if (!inActiveDocument)
{
brassAsset = brassAsset.CopyTo(doc);
}
mGraphicsNode.Appearance = brassAsset;
}
msg = msg + string.Format("GraphicsDataSetsCollection.Add time: {0} sec\n", dataSetsTimeSeconds)
+ string.Format("Coordinate set creation time: {0} sec\n", coordSetSeconds)
+ string.Format("Index set creation time: {0} sec\n", indexSetSeconds)
+ string.Format("Normal set creation time: {0} sec\n", normalSetSeconds)
+ string.Format("Triangle node creation time: {0} sec\n", trianglesSeconds);
}
catch (Exception e)
{
msg += string.Format("Exception: {0}", e.ToString());
}
mApp.ActiveView.Update();
System.Windows.MessageBox.Show(msg);
}
public void Draw3D(Part Bauteil, string Name)
{
foreach (var mmface in Bauteil.Faces)
{
foreach (var point in mmface.VertexCoords)
{
mVertices.Add((double)point.X);
mVertices.Add((double)point.Y);
mVertices.Add((double)point.Z);
}
var N = mmface.VertexIndices.Count; // Nomber of Indices
foreach (var indice in mmface.VertexIndices)
{
var i0 = indice;
var i1 = i0 + N;
var t0 = i0;
var t1 = i1;
// NOTE: The extra +1 on each line is because Inventor expects 1 - based indices.
mIndices.Add(t1 + 1 + 1);
mIndices.Add(t0 + 1);
mIndices.Add(t0 + 1 + 1);
// mIndices.Add(t1 + 1 + 1);
// mIndices.Add(t0 + 1);
mIndices.Add(t1 + 1);
}
foreach (var Norm in mmface.Normals)
{
mNormals.Add((double)Norm.X);
mNormals.Add((double)Norm.Y);
mNormals.Add((double)Norm.Z);
}
}
if (null != mGraphicsDataSets)
{
mGraphicsDataSets.Delete();
mGraphicsDataSets = null;
mGraphicsNode.Delete();
mGraphicsNode = null;
Addin3DPdf.TrAddInServer.MApp.ActiveView.Update();
return;
}
PartDocument
doc = Addin3DPdf.TrAddInServer.MApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject,
Addin3DPdf.TrAddInServer.MApp.FileManager.GetTemplateFile(DocumentTypeEnum.kPartDocumentObject),
true) as PartDocument;
// PartDocument doc = Addin3DPdf.TransAddInServer.MApp.ActiveDocument as PartDocument;
if (null == mClientGraphics)
{
mClientGraphics = doc.ComponentDefinition.ClientGraphicsCollection.Add(Name);
}
mGraphicsDataSets = doc.GraphicsDataSetsCollection.Add(Name);
double[] A_Verties = mVertices.ToArray();
int[] A_Indices = mIndices.ToArray();
double[] A_Normals = mNormals.ToArray();
try
{
var gcs = mGraphicsDataSets.CreateCoordinateSet(1) as GraphicsCoordinateSet;
gcs.PutCoordinates(A_Verties);
var gis = mGraphicsDataSets.CreateIndexSet(2) as GraphicsIndexSet;
gis.PutIndices(A_Indices);
var gns = mGraphicsDataSets.CreateNormalSet(3) as GraphicsNormalSet;
gns.PutNormals(A_Normals);
mGraphicsNode = mClientGraphics.AddNode(1) as GraphicsNode;
var triangles = mGraphicsNode.AddTriangleGraphics() as TriangleGraphics;
triangles.CoordinateSet = gcs;
triangles.CoordinateIndexSet = gis;
triangles.NormalSet = gns;
triangles.NormalBinding = NormalBindingEnum.kPerItemNormals;
triangles.NormalIndexSet = gis;
bool inActiveDocument;
var brassAsset = GetAsset("Silver", out inActiveDocument);
if (null != brassAsset)
{
if (!inActiveDocument)
{
brassAsset = brassAsset.CopyTo(doc);
}
mGraphicsNode.Appearance = brassAsset;
}
}
catch (Exception e)
{
}
doc.SaveAs(Name, false);
Addin3DPdf.TrAddInServer.MApp.ActiveView.Update();
}
