private static void CheckTimer_Elapsed(object sender, ElapsedEventArgs e)
{
//kill solidworks
swApp = null;
try
{
Process.Kill();
}
catch
{
}
Debug.Print("Solidworks Timed out");
Console.WriteLine("Solidworks Timed out");
while (swApp == null)
{
Tuple <SldWorks, Process> tuple = GetSolidworks.Solidworks(1);
swApp = tuple.Item1;
Process = tuple.Item2;
}
}
static void Main()
{
ModelDoc2 swModelDoc = default(ModelDoc2);
ModelDocExtension swModelDocExt = default(ModelDocExtension);
PackAndGo swPackAndGo = default(PackAndGo);
//SldWorks swApp = new SldWorks();
//GetSolidworks getSW = new GetSolidworks();
Tuple <SldWorks, Process> processes = GetSolidworks.Solidworks(1);
swApp = processes.Item1;
Process = processes.Item2;
//swApp.Visible = false;
//add another line to get item 2 which is the process which you can then use to kill when it derps
/* To be used to more easily choose which assemblies to pack and go
* List<string> trNames = new List<string>(new string[] { "500", "525"});
* List<string> cmtNames = new List<string>(new string[] { "500", "525" });
*
* for (int i = 0; i <= trNames.Count - 1; i++)
* {
* trNames[i] = "TR-34-20-" + trNames[i];
* }
* for (int i = 0; i <= cmtNames.Count - 1; i++)
* {
* cmtNames[i] = "CMT-34-20-" + cmtNames[i];
* }
*/
List <string> modelNames = new List <string>(new string[] { "TR-34-20-400", "TR-34-20-425", "TR-34-20-500", "TR-34-20-525", "TR-34-20-530", "TR-34-20-600", "TR-34-20-625", "TR-34-20-630", "TR-34-20-700", "TR-34-20-725", "TR-34-20-730", "TR-34-20-900", "TR-34-20-925", "TR-34-20-930",
"CMT-34-20-400", "CMT-34-20-425", "CMT-34-20-500", "CMT-34-20-525", "CMT-34-20-530", "CMT-34-20-600", "CMT-34-20-625", "CMT-34-20-630", "CMT-34-20-700", "CMT-34-20-725", "CMT-34-20-730", "CMT-34-20-900", "CMT-34-20-925", "CMT-34-20-930" });
//List<string> modelNames = new List<string>(new string[] { "TR-34-20-400", "TR-34-20-425", "TR-34-20-500" });
int modelCount = modelNames.Count;
while (modelNames.Count > 0)
{
SetCheckTimer();
int j = 0;
try
{
string openFile = null;
bool status = false;
int warnings = 0;
int errors = 0;
int i = 0;
int namesCount = 0;
string savePath = null;
int[] statuses = null;
openFile = @"C:\Configurator\" + modelNames[j] + ".sldasm";
Debug.Print("Performing pack and go on " + modelNames[j]);
Console.WriteLine("Performing pack and go on " + modelNames[j]);
swModelDoc = swApp.OpenDoc6(openFile, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
swModelDoc.Visible = false;
swApp.Visible = false; //opendoc6 seems to remove the visiblility setting
swModelDocExt = (ModelDocExtension)swModelDoc.Extension;
swPackAndGo = (PackAndGo)swModelDocExt.GetPackAndGo();
savePath = @"C:\Configurator\PackandGoTest\test.zip";
status = swPackAndGo.SetSaveToName(false, savePath);
swPackAndGo.FlattenToSingleFolder = true;
namesCount = swPackAndGo.GetDocumentNamesCount();
Debug.Print(" Number of model documents: " + namesCount);
Console.WriteLine(" Number of model documents: " + namesCount);
// Include any drawings, SOLIDWORKS Simulation results, and SOLIDWORKS Toolbox components
swPackAndGo.IncludeDrawings = true;
//Debug.Print(" Include drawings: " + swPackAndGo.IncludeDrawings);
swPackAndGo.IncludeSimulationResults = false;
//Debug.Print(" Include SOLIDWORKS Simulation results: " + swPackAndGo.IncludeSimulationResults);
swPackAndGo.IncludeToolboxComponents = false;
//Debug.Print(" Include SOLIDWORKS Toolbox components: " + swPackAndGo.IncludeToolboxComponents);
swPackAndGo.IncludeSuppressed = true;
// Verify document paths and filenames after adding prefix and suffix
object getFileNames;
object getDocumentStatus;
status = swPackAndGo.GetDocumentSaveToNames(out getFileNames, out getDocumentStatus);
string[] pgGetFileNames = (string[])getFileNames;
if (pgGetFileNames.Length == 0)
{
status = swPackAndGo.GetDocumentSaveToNames(out getFileNames, out getDocumentStatus);
pgGetFileNames = (string[])getFileNames;
}
for (int z = 0; z < pgGetFileNames.Length; z++)
{
if (pgGetFileNames[z].StartsWith(@"c:\configurator"))
{
}
else
{
Debug.Print(pgGetFileNames[z]);
Console.WriteLine("Please Remove This File and Try Again: " + pgGetFileNames[z]);
}
pgGetFileNames[z] = GetProperFilePathCapitalization(pgGetFileNames[z]);
}
swPackAndGo.SetDocumentSaveToNames(pgGetFileNames);
//for (int z = 0;z< )
//pgGetFileNames = (string[])getFileNames;
/*This section is unnecessary and clutters the debug window, add back in at own preference
* Debug.Print("");
* Debug.Print(" My Pack and Go path and filenames after adding prefix and suffix: ");
* for (i = 0; i <= namesCount - 1; i++)
* {
* Debug.Print(" My path and filename is: " + pgGetFileNames[i]);
* }
*/
// Pack and Go
statuses = (int[])swModelDocExt.SavePackAndGo(swPackAndGo);
//swApp.CloseDoc(modelNames[j]);
checkTimer.Stop();
swApp.CloseAllDocuments(true);
modelNames.RemoveAt(0); //removes as the very last step to ensure successful execution
}
catch (Exception e)
{
/*
* Process swProcess = new Process();
* int processID = swApp.GetProcessID();
* swProcess = Process.GetProcessById(processID);
* swProcess.Kill();
* while (swProcess.HasExited == false) { }
*/
checkTimer.Stop();
swApp = null;
try
{
Process.Kill();
}
catch
{
}
Debug.Print("Solidworks Crash: Restarting Now");
Console.WriteLine("Solidworks Crash: Restarting Now");
Debug.Print(e.StackTrace);
while (swApp == null)
{
Tuple <SldWorks, Process> tuple = GetSolidworks.Solidworks(1);
swApp = tuple.Item1;
Process = tuple.Item2;
}
}
}
swApp.Visible = true;
swApp.SendMsgToUser2("Pack and Go Is Complete!", 2, 2);
}