protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
GetObject go = new GetObject();
go.SetCommandPrompt("Select surfaces, polysurfaces, or meshes");
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
bool bHavePreselectedObjects = false;
for (; ;)
{
GetResult res = go.GetMultiple(1, 0);
if (res == GetResult.Option)
{
go.EnablePreSelect(false, true);
continue;
}
else if (res != GetResult.Object)
{
return(Result.Cancel);
}
if (go.ObjectsWerePreselected)
{
bHavePreselectedObjects = true;
go.EnablePreSelect(false, true);
continue;
}
break;
}
BoundingBox box = BoundingBox.Empty;
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (null != rhinoObject)
{
box.Union(rhinoObject.Geometry.GetBoundingBox(true));
}
rhinoObject.Select(false);
}
if (box.IsValid)
{
RFContext.ClippingBox = new Box(box);
//RFContext.Clip = true;
return(Result.Success);
}
return(Result.Nothing);
}
public static GetObject GetRhinoObjects(string prompt, ObjectType geometryFilter)
{
GetObject go = new GetObject();
go.SetCommandPrompt(prompt);
go.GeometryFilter = geometryFilter;
go.GroupSelect = false;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
bool bHavePreselectedObjects = true;
for (; ;)
{
GetResult res = go.GetMultiple(1, 0);
if (res == GetResult.Option)
{
go.EnablePreSelect(false, true);
continue;
}
else if (res != GetResult.Object)
{
return(go);
}
if (go.ObjectsWerePreselected)
{
bHavePreselectedObjects = true;
go.EnablePreSelect(false, true);
continue;
}
break;
}
if (bHavePreselectedObjects)
{
// Normally, pre-selected objects will remain selected, when a
// command finishes, and post-selected objects will be unselected.
// This this way of picking, it is possible to have a combination
// of pre-selected and post-selected. So, to make sure everything
// "looks the same", lets unselect everything before finishing
// the command.
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (null != rhinoObject)
{
rhinoObject.Select(false);
}
}
}
return(go);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// TODO: start here modifying the behaviour of your command.
//Select objects
try
{
GetObject go = new GetObject();
go.EnablePreSelect(true, true);
go.EnablePostSelect(true);
go.SetCommandPrompt("Super Intersection | Advanced Boolean Intersection:");
go.GetMultiple(1, 0);
if (go.ObjectCount > 0)
{
RhinoApp.RunScript("_BooleanIntersection", true);
RhinoApp.RunScript("_SelLast", true);
RhinoApp.RunScript("_MergeAllFaces", true);
RhinoApp.RunScript("_ShrinkTrimmedSrf", true);
}
return(Result.Success);
}
catch
{
return(Result.Failure);
}
}
/// <summary>
/// This function selects breps
/// </summary>
///
///
public static bool XSelectBreps(string message, out RhinoList <Brep> breps)
{
breps = new RhinoList <Brep>();
int i;
var gc = new GetObject();
gc.SetCommandPrompt("Select some Breps");
gc.EnablePreSelect(true, true);
gc.GeometryFilter = Rhino.DocObjects.ObjectType.Brep;
gc.GetMultiple(1, 0);
//we do our double check to make sure the user selected something
if (gc.CommandResult() != Result.Success)
{
return(false);
}
for (i = 0; i < gc.ObjectCount; i++)
{
var brep = gc.Object(i).Brep();
if (null != brep)
{
breps.Add(brep);
}
}
return(true);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var gm = new GetObject();
gm.SetCommandPrompt("Select mesh");
gm.GeometryFilter = ObjectType.Mesh;
gm.Get();
if (gm.CommandResult() != Result.Success)
{
return(gm.CommandResult());
}
var gp = new GetObject();
gp.SetCommandPrompt("Select polyline");
gp.GeometryFilter = ObjectType.Curve;
gp.EnablePreSelect(false, true);
gp.DeselectAllBeforePostSelect = false;
gp.Get();
if (gm.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var mesh = gm.Object(0).Mesh();
if (null == mesh)
{
return(Result.Failure);
}
var curve = gp.Object(0).Curve();
if (null == curve)
{
return(Result.Failure);
}
var polyline_curve = curve as PolylineCurve;
if (null == polyline_curve)
{
RhinoApp.Write("Curve is not a polyline");
return(Result.Nothing);
}
int[] face_ids;
var points = Rhino.Geometry.Intersect.Intersection.MeshPolyline(mesh, polyline_curve, out face_ids);
if (points.Length > 0)
{
foreach (var pt in points)
{
doc.Objects.AddPoint(pt);
}
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go0 = new GetObject();
go0.SetCommandPrompt("Select surface or polysurface to subtract from");
go0.GeometryFilter = ObjectType.Surface | ObjectType.PolysrfFilter;
go0.SubObjectSelect = false;
go0.Get();
if (go0.CommandResult() != Result.Success)
{
return(go0.CommandResult());
}
var brep0 = go0.Object(0).Brep();
if (null == brep0)
{
return(Result.Failure);
}
var go1 = new GetObject();
go1.SetCommandPrompt("Select surface or polysurface to subtract with");
go1.GeometryFilter = ObjectType.Surface | ObjectType.PolysrfFilter;
go1.SubObjectSelect = false;
go1.EnablePreSelect(false, true);
go1.DeselectAllBeforePostSelect = false;
go1.Get();
if (go1.CommandResult() != Result.Success)
{
return(go1.CommandResult());
}
var brep1 = go1.Object(0).Brep();
if (null == brep1)
{
return(Result.Failure);
}
var tolerance = doc.ModelAbsoluteTolerance;
var out_breps = Brep.CreateBooleanDifference(brep0, brep1, tolerance);
if (null != out_breps && out_breps.Length > 0)
{
foreach (var b in out_breps)
{
doc.Objects.AddBrep(b);
}
doc.Objects.Delete(go0.Object(0).ObjectId, true);
doc.Objects.Delete(go1.Object(0).ObjectId, true);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var get_outer = new GetObject();
get_outer.SetCommandPrompt("Outer profile curve");
get_outer.GeometryFilter = ObjectType.Curve;
get_outer.SubObjectSelect = false;
get_outer.Get();
if (get_outer.CommandResult() != Result.Success)
{
return(get_outer.CommandResult());
}
var outer = get_outer.Object(0).Curve();
if (null == outer)
{
return(Result.Failure);
}
var get_inner = new GetObject();
get_inner.SetCommandPrompt("Inner profile curve");
get_inner.GeometryFilter = ObjectType.Curve;
get_inner.SubObjectSelect = false;
get_inner.EnablePreSelect(false, true);
get_inner.DeselectAllBeforePostSelect = false;
get_inner.GetMultiple(1, 0);
if (get_inner.CommandResult() != Result.Success)
{
return(get_outer.CommandResult());
}
var inners = new Curve[get_inner.ObjectCount];
for (var i = 0; i < get_inner.ObjectCount; i++)
{
var inner = get_inner.Object(i).Curve();
if (null == inner)
{
return(Result.Failure);
}
inners[i] = inner;
}
var extrusion = CreateExtrusion(outer, inners, 10);
if (null != extrusion)
{
doc.Objects.AddExtrusion(extrusion);
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
const ObjectType selFilter = ObjectType.PolysrfFilter | ObjectType.Extrusion;
bool value = false;
double preShrinkValue = ZERO_CM;
OptionToggle shrinkToDimensions = new OptionToggle(value, "Off", "On");
OptionDouble preShrink = new OptionDouble(preShrinkValue, 0.0, 1.0);
ObjRef boxObjRef = null;
GetObject go = new GetObject();
go.SetCommandPrompt("Select the box to net-ify");
go.AddOptionToggle("Constrain", ref shrinkToDimensions);
go.AddOptionDouble("PreShrink", ref preShrink, "Preshrink");
go.GeometryFilter = selFilter;
go.EnableClearObjectsOnEntry(true);
go.EnableUnselectObjectsOnExit(true);
// TODO: clean up this hot mess
for (;;)
{
GetResult getObjResult = go.Get();
if (getObjResult == GetResult.Object)
{
boxObjRef = go.Object(0);
boxObjRef.Object().Select(on: true, syncHighlight: true);
go.EnablePreSelect(false, true);
go.AcceptNothing(true);
continue;
}
else if (getObjResult == GetResult.Cancel)
{
return(Result.Cancel);
}
// Case where user presses enter
else if (getObjResult == GetResult.Nothing)
{
if (boxObjRef != null)
{
preShrinkValue = preShrink.CurrentValue;
if (preShrinkValue != ZERO_CM)
{
boxObjRef = shrinkBoxObj(boxObjRef, preShrinkValue);
}
drawNetFromObjRef(boxObjRef, doc, shrinkToDimensions.CurrentValue);
return(Result.Success);
}
}
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select grips to move");
go.GeometryFilter = ObjectType.Grip;
go.EnablePreSelect(true, true);
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
var gp = new GetPoint();
gp.SetCommandPrompt("Point to move from");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var from = gp.Point();
gp.SetCommandPrompt("Point to move to");
gp.SetBasePoint(from, true);
gp.DrawLineFromPoint(from, true);
gp.Get();
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var to = gp.Point();
var dir = to - from;
if (dir.IsTiny(doc.ModelAbsoluteTolerance))
{
return(Result.Nothing);
}
var xform = Transform.Translation(dir);
var helper = new SampleCsGripHelper(doc);
helper.AddGripObjects(go);
helper.TransformAndUpdate(xform);
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// Check the selected dot
GetObject go = new GetObject();
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
go.EnableSelPrevious(true);
go.EnablePreSelect(true, false);
go.GeometryFilter = Rhino.DocObjects.ObjectType.Annotation;
go.SetCommandPrompt("Select Text to replace:");
GetResult result = go.GetMultiple(1, -1);
if (go.CommandResult() != Rhino.Commands.Result.Success)
{
return(go.CommandResult());
}
RhinoApp.WriteLine("Object selection counter = {0}", go.ObjectCount);
List <TextEntity> textEntityList = new List <TextEntity>();
List <RhinoObject> rhinoObjectList = new List <RhinoObject>();
// Loop through all the objects to find Text
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (rhinoObject.ObjectType == ObjectType.Annotation)
{
TextEntity textEntity = rhinoObject.Geometry as TextEntity;
if (textEntity != null)
{
rhinoObjectList.Add(rhinoObject);
}
}
}
FindAndReplaceForm findForm = new FindAndReplaceForm(rhinoObjectList);
findForm.ShowDialog(RhinoApp.MainWindow());
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// Check the selected curve
GetObject go = new GetObject();
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
go.EnableSelPrevious(true);
go.EnablePreSelect(true, false);
go.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
GetResult result = go.Get();
if (go.CommandResult() != Rhino.Commands.Result.Success)
{
return(go.CommandResult());
}
if (go.ObjectCount != 1)
{
RhinoApp.WriteLine("Error: {0} curve is selected.", go.ObjectCount);
return(Rhino.Commands.Result.Failure);
}
RhinoApp.WriteLine("{0} curve is selected.", go.ObjectCount);
Curve curve = go.Object(0).Curve();
// If curve is null
if (curve == null)
{
return(Rhino.Commands.Result.Failure);
}
// If curve is Closed Curve Orientation
if (curve.IsClosed == false)
{
RhinoApp.WriteLine("The curve is open");
return(Rhino.Commands.Result.Failure);
}
RhinoUtilities.SetActiveLayer(Properties.Settings.Default.PerforationLayerName, System.Drawing.Color.Green);
PerforationForm perforationForm = new PerforationForm(curve);
perforationForm.ShowDialog(RhinoApp.MainWindow());
RhinoDoc.ActiveDoc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var have_preselected_objects = false;
var go = new GetObject();
go.SetCommandPrompt("Select objects");
go.GeometryFilter = ObjectType.AnyObject;
go.GroupSelect = true;
go.SubObjectSelect = false;
while (true)
{
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
if (go.ObjectsWerePreselected)
{
have_preselected_objects = true;
go.EnablePreSelect(false, true);
go.AlreadySelectedObjectSelect = true;
go.EnableClearObjectsOnEntry(false);
go.DeselectAllBeforePostSelect = false;
go.EnableUnselectObjectsOnExit(false);
continue;
}
break;
}
if (have_preselected_objects)
{
for (var i = 0; i < go.ObjectCount; i++)
{
var obj = go.Object(i).Object();
obj?.Select(false);
}
doc.Views.Redraw();
}
RhinoApp.WriteLine("Select object count: {0}", go.ObjectCount);
return(Result.Success);
}
private static List <RhinoObject> GetObjectSelection(ObjectType filter = ObjectType.AnyObject)
{
// Construct an objects getter
var getObj = new GetObject();
getObj.SetCommandPrompt("Select geometry");
getObj.GroupSelect = true;
getObj.SubObjectSelect = false;
getObj.EnableClearObjectsOnEntry(false);
getObj.EnableUnselectObjectsOnExit(false);
getObj.DeselectAllBeforePostSelect = false;
getObj.GeometryFilter = filter;
// Get objects
for (; ;)
{
GetResult res = getObj.GetMultiple(1, 0);
if (res == GetResult.Option)
{
getObj.EnablePreSelect(false, true);
continue;
}
else if (res != GetResult.Object)
{
return(null);
}
if (getObj.ObjectsWerePreselected)
{
getObj.EnablePreSelect(false, true);
continue;
}
break;
}
return(getObj.Objects().Select(o => o.Object()).ToList());
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
GetObject getObjs = new GetObject();
getObjs.SetCommandPrompt("Select objects for schema removal");
getObjs.GroupSelect = true;
getObjs.SubObjectSelect = false;
getObjs.EnableClearObjectsOnEntry(false);
getObjs.EnableUnselectObjectsOnExit(false);
getObjs.DeselectAllBeforePostSelect = false;
bool hasPreselected = false;
for (; ;)
{
GetResult res = getObjs.GetMultiple(1, 0);
if (res != GetResult.Object)
{
return(Result.Cancel);
}
if (getObjs.ObjectsWerePreselected)
{
hasPreselected = true;
getObjs.EnablePreSelect(false, true);
continue;
}
break;
}
//This chunk just makes sure objects selected during the command stay selected afterwards. Optional.
if (hasPreselected)
{
SelectAllCommandObjs(getObjs, doc);
}
List <RhinoObject> objs = getObjs.Objects().Select(o => o.Object()).ToList();
foreach (RhinoObject obj in objs)
{
obj.Attributes.DeleteUserString(SpeckleSchemaKey);
}
return(Result.Success);
}
//==============================
private Curve[] GetCurves()
{
GetObject go = new GetObject();
go.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
go.SetCommandPrompt("Hyper Split | Split All Curves With One Another:");
go.EnablePreSelect(true, true);
go.EnablePostSelect(true);
go.GetMultiple(1, 0);
Curve[] CurveSel = new Curve[go.ObjectCount];
TempRef = go.Objects();
for (int i = 0; i < go.ObjectCount; i++)
{
CurveSel[i] = go.Object(i).Curve();
}
return(CurveSel);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
List <RhinoObject> objs = new List <RhinoObject>();
using (GetObject getter = new GetObject())
{
getter.EnablePreSelect(true, false);
getter.SetCommandPrompt("Select all the objects you want to tag");
getter.AcceptColor(false);
getter.AcceptString(false);
getter.GroupSelect = true;
getter.GetMultiple(1, 0);
if (getter.CommandResult() != Result.Success)
{
return(getter.CommandResult());
}
for (int i = 0; i < getter.ObjectCount; i++)
{
objs.Add(getter.Object(i).Object());
}
}
string tagName;
using (GetString getter = new GetString())
{
getter.SetCommandPrompt("Enter the tag");
if (getter.Get() != GetResult.String)
{
RhinoApp.WriteLine("Invalid Input for tag");
return(getter.CommandResult());
}
tagName = getter.StringResult();
}
TagUtil.AddTag(objs, tagName, true);
doc.Modified = true;
doc.Objects.UnselectAll();
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
// TODO: start here modifying the behaviour of your command.
// ---
RhinoApp.WriteLine("The {0} command will select the curve with same length", EnglishName);
double tolerance = 0.001;
Rhino.Commands.Result rc = Rhino.Commands.Result.Failure;
using (GetObject getObjectAction = new GetObject())
{
getObjectAction.GeometryFilter = ObjectType.Curve;
getObjectAction.SetCommandPrompt("Please select curves");
var dblOption = new OptionDouble(tolerance, true, 0);
getObjectAction.AddOptionDouble("SelectionTolerance", ref dblOption);
getObjectAction.EnablePreSelect(true, true);
var result = getObjectAction.Get();
double refLength = 0.0;
if (result == GetResult.Object)
{
var value = getObjectAction.Object(0);
var crv = value.Curve();
if (crv != null)
{
refLength = crv.GetLength();
var objects = doc.Objects.FindByObjectType(ObjectType.Curve);
foreach (var obj in objects)
{
var _curve = (new ObjRef(obj)).Curve();
if (Rhino.RhinoMath.EpsilonEquals(_curve.GetLength(), refLength, dblOption.CurrentValue))
{
obj.Select(true);
}
}
rc = Rhino.Commands.Result.Success;
}
}
}
doc.Views.Redraw();
return(rc);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var gs = new GetObject();
gs.SetCommandPrompt("Select surface");
gs.GeometryFilter = Rhino.DocObjects.ObjectType.Surface;
gs.SubObjectSelect = true;
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
var face = gs.Object(0).Face();
if (null == face)
{
return(Result.Failure);
}
var gc = new GetObject();
gc.SetCommandPrompt("Select curve");
gc.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gc.EnablePreSelect(false, true);
gc.DeselectAllBeforePostSelect = false;
gc.Get();
if (gc.CommandResult() != Result.Success)
{
return(gc.CommandResult());
}
var curve = gc.Object(0).Curve();
if (null == curve)
{
return(Result.Failure);
}
var tol = doc.ModelAbsoluteTolerance;
var rc = Intersection.CurveBrepFace(curve, face, tol, out Curve[] outCurves, out Point3d[] outPoints);
//this is where the logic of the command is defined
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
List <RhinoObject> objs = new List <RhinoObject>();
using (GetObject getter = new GetObject())
{
getter.EnablePreSelect(true, false);
getter.SetCommandPrompt("Select the objects whose tags you need to delete");
getter.GroupSelect = true;
getter.GetMultiple(1, 0);
if (getter.CommandResult() != Result.Success)
{
return(getter.CommandResult());
}
for (int i = 0; i < getter.ObjectCount; i++)
{
objs.Add(getter.Object(i).Object());
}
}
string tagName;
using (GetString getter = new GetString())
{
getter.SetCommandPrompt("Enter the tag");
if (getter.Get() != GetResult.String)
{
RhinoApp.WriteLine("Invalid Input for tag");
return(getter.CommandResult());
}
tagName = getter.StringResult();
//Debug.WriteLine(tagName, "Tag");
}
doc.Objects.UnselectAll();
TagUtil.DeleteTag(ref objs, tagName, true);
//marking the document as dirty - i.e. modified so that it prompts the user to save when closed without saving
doc.Modified = true;
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// Check the selected dot
GetObject go = new GetObject();
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
go.EnableSelPrevious(true);
go.EnablePreSelect(true, false);
go.GeometryFilter = Rhino.DocObjects.ObjectType.Point | Rhino.DocObjects.ObjectType.Annotation;
go.SetCommandPrompt("Select Label and a point:");
GetResult result = go.GetMultiple(2, -1);
if (go.CommandResult() != Rhino.Commands.Result.Success)
{
return(go.CommandResult());
}
RhinoApp.WriteLine("Object selection counter = {0}", go.ObjectCount);
Point pt = null;
TextEntity textEntity = null;
int pointCounter = 0;
int textCounter = 0;
// Loop through all the objects to find Text
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (rhinoObject.ObjectType == ObjectType.Annotation)
{
textEntity = rhinoObject.Geometry as TextEntity;
if (textEntity != null && textCounter == 0)
{
textCounter++;
}
}
else if (rhinoObject.ObjectType == ObjectType.Point)
{
pt = rhinoObject.Geometry as Point;
if (pt != null && pointCounter == 0)
{
pointCounter++;
}
}
}
//if (go.Object(0).Point() != null && go.Object(1).TextEntity() != null)
//{
// pt = go.Object(0).Point();
// textEntity = go.Object(1).TextEntity();
//}
//else if (go.Object(1).Point() != null && go.Object(0).TextEntity() != null)
//{
// pt = go.Object(1).Point();
// textEntity = go.Object(0).TextEntity();
//}
//else
//{
// RhinoApp.WriteLine("Two of the same objects are selected.");
// return Result.Failure;
//}
if (textCounter > 1)
{
RhinoApp.WriteLine("More than one text has been selected.");
}
if (pointCounter > 1)
{
RhinoApp.WriteLine("More than one point has been selected.");
}
if (pt != null && textEntity != null)
{
drawDotMatrix(pt.Location, textEntity.Text, Properties.Settings.Default.DotMatrixHeight);
}
doc.Views.Redraw();
return(Result.Success);
}
/// <summary>
/// Creates the layout.
/// </summary>
/// <param name="doc">The document.</param>
/// <param name="panel">The panel.</param>
/// <param name="panelParas">The panel paras.</param>
/// <returns></returns>
public Result createLayout(RhinoDoc doc, FoldedPerforationPanel panel, PanelParameters panelParas)
{
if (panelParas == null)
{
panelParas = new PanelParameters();
}
if (panel == null)
{
panel = new FoldedPerforationPanel();
}
// Get all selected Objects
GetObject go = new GetObject();
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
go.EnableSelPrevious(true);
go.EnablePreSelect(true, false);
go.EnablePressEnterWhenDonePrompt(false);
go.SetCommandPrompt("Select items for the new layout:");
// Disable the scaling
RhinoApp.RunScript("_-DocumentProperties AnnotationStyles ModelSpaceScaling=Disabled LayoutSpaceScaling=Disabled _Enter _Enter", true);
GetResult result = go.GetMultiple(1, -1);
if (go.CommandResult() != Rhino.Commands.Result.Success)
{
return(go.CommandResult());
}
RhinoApp.WriteLine("Total Objects Selected: {0}", go.ObjectCount);
string labelName = panel.PartName;
string area = string.Format("{0:0.00}", panel.Area);
Point2d minPoint = new Point2d(0, 0);
Point2d maxPoint = new Point2d(0, 0);
// Loop through all the objects to find Text
for (int i = 0; i < go.ObjectCount; i++)
{
BoundingBox bBox = go.Object(i).Object().Geometry.GetBoundingBox(true);
if (bBox.Min.X < minPoint.X)
{
minPoint.X = bBox.Min.X;
}
if (bBox.Min.Y < minPoint.Y)
{
minPoint.Y = bBox.Min.Y;
}
if (bBox.Max.X > maxPoint.X)
{
maxPoint.X = bBox.Max.X;
}
if (bBox.Max.Y > maxPoint.Y)
{
maxPoint.Y = bBox.Max.Y;
}
}
// If the selected items has no label, return failure
if (labelName == null)
{
return(Rhino.Commands.Result.Failure);
}
// Hide all the non selected objects
foreach (var obj in doc.Objects)
{
if (obj.IsSelected(true) == 0)
{
doc.Objects.Hide(obj, false);
}
}
// Add layout
doc.PageUnitSystem = Rhino.UnitSystem.Millimeters;
RhinoView currentView = doc.Views.ActiveView;
var pageview = doc.Views.AddPageView(string.Format("{0}", labelName), 210, 297);
Point2d bottomLeft = new Point2d(10, 70);
Point2d topRight = new Point2d(200, 287);
if (pageview != null)
{
pageview.SetPageAsActive();
var detail = pageview.AddDetailView("Panel", bottomLeft, topRight, Rhino.Display.DefinedViewportProjection.Top);
// Show all objects
RhinoApp.RunScript("_-Show _Enter", true);
if (detail != null)
{
pageview.SetActiveDetail(detail.Id);
doc.Views.ActiveView = pageview;
//doc.Views.Redraw();
// Select all the objects
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
rhinoObject.Select(true);
}
// Hide all the non selected objects
var filter = new ObjectEnumeratorSettings
{
NormalObjects = true,
LockedObjects = false,
HiddenObjects = false,
ActiveObjects = true,
ReferenceObjects = true
};
var rh_objects = doc.Objects.FindByFilter(filter);
pageview.SetPageAsActive();
//doc.Views.Redraw();
foreach (var rh_obj in rh_objects)
{
var select = 0 == rh_obj.IsSelected(false) && rh_obj.IsSelectable();
rh_obj.Select(select);
}
RhinoApp.RunScript("_-HideInDetail Enter", true);
detail.IsActive = false;
}
bottomLeft = new Point2d(10, 40);
topRight = new Point2d(135, 70);
detail = pageview.AddDetailView("Sample", bottomLeft, topRight, Rhino.Display.DefinedViewportProjection.Top);
// doc.Views.Redraw();
pageview.SetActiveDetail(detail.Id);
detail.Viewport.SetCameraLocation(new Point3d(50, 160, 0), true);
detail.CommitViewportChanges();
// doc.Views.Redraw();
detail.DetailGeometry.IsProjectionLocked = true;
detail.DetailGeometry.SetScale(4.5, doc.ModelUnitSystem, 1, doc.PageUnitSystem);
detail.CommitChanges();
// doc.Views.Redraw();
detail.IsActive = true;
pageview.SetActiveDetail(detail.Id);
RhinoApp.WriteLine("Name = {0}: Width = {1}, Height = {2}",
detail.Viewport.Name, detail.Viewport.Size.Width, detail.Viewport.Size.Height);
detail.CommitViewportChanges();
// doc.Views.Redraw();
detail.IsActive = false;
bottomLeft = new Point2d(5, 5);
topRight = new Point2d(205, 35);
detail = pageview.AddDetailView("Block", bottomLeft, topRight, Rhino.Display.DefinedViewportProjection.Top);
// doc.Views.Redraw();
detail.IsActive = true;
pageview.SetActiveDetail(detail.Id);
detail.Viewport.SetCameraLocation(new Point3d(105, 520, 0), true);
detail.CommitViewportChanges();
// doc.Views.Redraw();
detail.DetailGeometry.IsProjectionLocked = true;
detail.DetailGeometry.SetScale(1, doc.ModelUnitSystem, 1, doc.PageUnitSystem);
detail.CommitChanges();
detail.IsActive = false;
// doc.Views.Redraw();
drawBlock(doc, labelName, area, panel.PanelNumber, panelParas);
// doc.Views.Redraw();
}
// Show all objects
RhinoApp.RunScript("_-Show _Enter", true);
doc.Views.DefaultViewLayout();
doc.Views.ActiveView = currentView;
return(Result.Success);
}
/// <summary>
/// Runs the command
/// </summary>
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// Select objects to orient
var go = new GetObject();
go.SetCommandPrompt("Select objects to orient");
go.SubObjectSelect = false;
go.GroupSelect = true;
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
// Point to orient from
var gp = new GetPoint();
gp.SetCommandPrompt("Point to orient from");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
// Define source plane
var view = gp.View();
if (view == null)
{
view = doc.Views.ActiveView;
if (view == null)
{
return(Result.Failure);
}
}
var plane = view.ActiveViewport.ConstructionPlane();
plane.Origin = gp.Point();
// Curve to orient on
var gc = new GetObject();
gc.SetCommandPrompt("Curve to orient on");
gc.GeometryFilter = ObjectType.Curve;
gc.EnablePreSelect(false, true);
gc.DeselectAllBeforePostSelect = false;
gc.Get();
if (gc.CommandResult() != Result.Success)
{
return(gc.CommandResult());
}
var objref = gc.Object(0);
var obj = objref.Object();
var curve = objref.Curve();
if (obj == null || curve == null)
{
return(Result.Failure);
}
// Unselect curve
obj.Select(false);
// Point on surface to orient to
var gx = new GetOrientPerpendicularPoint(curve, plane, go.Object(0).Object());
gx.SetCommandPrompt("New base point on curve");
gx.Get();
if (gx.CommandResult() != Result.Success)
{
return(gx.CommandResult());
}
// One final calculation
var xform = new Transform(1);
if (gx.CalculateTransform(gx.View().ActiveViewport, gx.Point(), ref xform))
{
doc.Objects.Transform(go.Object(0).Object(), xform, true);
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// Select planar surface
var gs = new GetObject();
gs.SetCommandPrompt("Select planar surface");
gs.GeometryFilter = ObjectType.Surface;
gs.SubObjectSelect = false;
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
var brep_ref = gs.Object(0);
var brep = brep_ref.Brep();
if (null == brep)
{
return(Result.Failure);
}
// Verify underlying surface is a PlaneSurface
var plane_surface = brep.Faces[0].UnderlyingSurface() as PlaneSurface;
if (null == plane_surface)
{
return(Result.Nothing);
}
// Select trimming curves on planar surface
var gc = new GetObject();
gc.SetCommandPrompt("Select trimming curves on planar surface");
gc.GeometryFilter = ObjectType.Curve;
gc.GroupSelect = true;
gc.SubObjectSelect = false;
gc.EnablePreSelect(false, true);
gc.DeselectAllBeforePostSelect = false;
gc.GetMultiple(1, 0);
if (gc.CommandResult() != Result.Success)
{
return(gc.CommandResult());
}
// Make a copy of the selected Brep
var new_brep = new Brep();
new_brep.Append(brep);
// Add each selected curve a a inner planar face loop
var boundary = new Curve[1];
for (var i = 0; i < gc.ObjectCount; i++)
{
var curve = gc.Object(i).Curve();
if (null != curve)
{
boundary[0] = curve;
new_brep.Loops.AddPlanarFaceLoop(0, BrepLoopType.Inner, boundary);
}
}
new_brep.Compact();
// IF all is well, then replace the selecte Brep with our new one
if (new_brep.IsValid)
{
doc.Objects.Replace(brep_ref.ObjectId, new_brep);
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// TODO: complete command.
GetObject go = new GetObject();
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
go.EnableSelPrevious(true);
go.EnablePreSelect(true, false);
go.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
go.SetCommandPrompt("Select All circles you want to filter:");
GetResult result = go.GetMultiple(1, 0);
if (go.CommandResult() != Rhino.Commands.Result.Success)
{
return(go.CommandResult());
}
int fixingHoleCounter = go.ObjectCount;
RhinoApp.WriteLine("circle selection counter = {0}", fixingHoleCounter);
int i = 0;
Point3d[] fixingHole = new Point3d[fixingHoleCounter];
double[] fixingHoleD = new double[fixingHoleCounter];
RhinoObject[] references = new RhinoObject[fixingHoleCounter];
for (i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
Curve curve = (new ObjRef(rhinoObject)).Curve();
if (curve == null)
{
continue;
}
if (curve.IsClosed == false)
{
continue;
}
if (curve.IsPlanar() == false)
{
continue;
}
if (curve.IsCircle())
{
BoundingBox boundingBox = curve.GetBoundingBox(true);
fixingHoleD[i] = boundingBox.Max.X - boundingBox.Min.X;
fixingHole[i] = boundingBox.Center;
references[i] = rhinoObject;
}
}
//Get the gap clearance offset
go.SetCommandPrompt("Enter detection radius:");
go.AcceptNumber(true, false);
go.Get();
double offset = go.Number();
double perforationHoldD;
string layerName = "";
//for testing purpose, draw the hole with offset using red color
/*Curve[] circles = new Curve[fixingHole.Length];
* for (i = 0; i < circles.Length; i++)
* {
*
* circles[i] = new ArcCurve(new Circle(fixingHole[i], offset));
* }
*
*
* if (circles != null)
* {
* layerName = offset + "mm GAP CLEARANCE";
* RhinoUtilities.SetActiveLayer(layerName, System.Drawing.Color.Red);
*
* foreach (Curve cv in circles)
* {
* Guid guid = RhinoDoc.ActiveDoc.Objects.AddCurve(cv);
* }
* }*/
string clashHoleLayerName = "HOLES CLASHED";
Layer clashHoleLayer = new Layer();
clashHoleLayer.Name = clashHoleLayerName;
clashHoleLayer.Color = System.Drawing.Color.Red;
int clashHoleLayerIndex = doc.Layers.Add(clashHoleLayer);
int currentHoleCounter;
int flag;
bool[] deletedCircles = new bool[fixingHole.Length];
for (i = 0; i < deletedCircles.Length; i++)
{
deletedCircles[i] = false;
}
Curve circles;
RhinoUtilities.SetActiveLayer(clashHoleLayerName, System.Drawing.Color.Red);
for (i = 0; i < fixingHole.Length - 1; i++)
{
currentHoleCounter = 0;
flag = 0;
for (int j = i + 1; j < fixingHole.Length; j++)
{
if (deletedCircles[j] == true)
{
continue;
}
if (fixingHole[i].DistanceTo(fixingHole[j]) < fixingHoleD[i] + offset)
{
if (currentHoleCounter == 0)
{
flag = j;
currentHoleCounter++;
}
else
{
currentHoleCounter++;
break;
}
}
if (currentHoleCounter == 1)
{
circles = new ArcCurve(new Circle(fixingHole[flag], fixingHoleD[flag] / 2));
Guid guid = RhinoDoc.ActiveDoc.Objects.AddCurve(circles);
RhinoDoc.ActiveDoc.Objects.Delete(references[flag], false);
deletedCircles[flag] = true;
}
else if (currentHoleCounter == 2)
{
circles = new ArcCurve(new Circle(fixingHole[i], fixingHoleD[i] / 2));
Guid guid = RhinoDoc.ActiveDoc.Objects.AddCurve(circles);
RhinoDoc.ActiveDoc.Objects.Delete(references[i], false);
deletedCircles[i] = true;
}
}
}
RhinoUtilities.setLayerVisibility("HOLES CLASHED", true);
RhinoUtilities.setLayerVisibility(layerName, false);
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// Check the selected dot
GetObject go = new GetObject();
// Create a new dictionary of strings, with string keys.
//
Dictionary <double, double> sizeAngle = new Dictionary <double, double>();
List <double> holeSizeList = new List <double>();
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
go.EnableSelPrevious(true);
go.EnablePreSelect(true, false);
go.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
go.SetCommandPrompt("Select all the circles:");
GetResult result = go.GetMultiple(1, -1);
if (go.CommandResult() != Rhino.Commands.Result.Success)
{
return(go.CommandResult());
}
RhinoApp.WriteLine("Object selection counter = {0}", go.ObjectCount);
List <RhinoObject> rhinoObjectList = new List <RhinoObject>();
List <ArcCurve> arcCurveList = new List <ArcCurve>();
// Loop through all the objects to find Text
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (rhinoObject.ObjectType == ObjectType.Curve)
{
ArcCurve curve = rhinoObject.Geometry as ArcCurve;
if (curve != null)
{
if (curve.IsCircle() == true)
{
if (!holeSizeList.Exists(element => element == curve.Radius))
{
holeSizeList.Add(curve.Radius);
}
arcCurveList.Add(curve);
// rhinoObjectList.Add(rhinoObject);
}
}
}
}
holeSizeList.Sort();
if (holeSizeList.Count < 1)
{
return(Result.Failure);
}
double maxHole = holeSizeList.Max();
double minHole = holeSizeList.Min();
foreach (double size in holeSizeList)
{
double angle;
if ((maxHole - minHole) != 0)
{
angle = 180 * ((size - minHole) / (maxHole - minHole));
}
else
{
angle = 0;
}
sizeAngle.Add(size, angle);
}
// Create a new layer
string layerName = "FormTool";
// Does a layer with the same name already exist?
int layerIndex = doc.Layers.Find(layerName, true);
// If layer does not exist
if (layerIndex == -1)
{
// Add a new layer to the document
layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black);
}
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
foreach (ArcCurve ac in arcCurveList)
{
double angle = 0;
sizeAngle.TryGetValue(ac.Radius, out angle);
drawFormTool(ac.Arc.Center.X, ac.Arc.Center.Y, angle * Math.PI / 180);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
const ObjectType geometry_filter = ObjectType.Surface | ObjectType.PolysrfFilter | ObjectType.Mesh;
var integer1 = 300;
var integer2 = 300;
var option_integer1 = new OptionInteger(integer1, 200, 900);
var option_integer2 = new OptionInteger(integer2, 200, 900);
var go = new GetObject();
go.SetCommandPrompt("Select surfaces, polysurfaces, or meshes");
go.GeometryFilter = geometry_filter;
go.AddOptionInteger("Option1", ref option_integer1);
go.AddOptionInteger("Option2", ref option_integer2);
go.GroupSelect = true;
go.SubObjectSelect = false;
var have_preselected_objects = false;
while (true)
{
var res = go.GetMultiple(1, 0);
if (res == GetResult.Option)
{
go.EnablePreSelect(false, true);
go.AlreadySelectedObjectSelect = true;
go.EnableClearObjectsOnEntry(false);
go.DeselectAllBeforePostSelect = false;
go.EnableUnselectObjectsOnExit(false);
continue;
}
if (res != GetResult.Object)
{
return(Result.Cancel);
}
if (go.ObjectsWerePreselected)
{
have_preselected_objects = true;
go.EnablePreSelect(false, true);
go.AlreadySelectedObjectSelect = true;
go.EnableClearObjectsOnEntry(false);
go.DeselectAllBeforePostSelect = false;
go.EnableUnselectObjectsOnExit(false);
continue;
}
break;
}
if (have_preselected_objects)
{
// Normally, pre-selected objects will remain selected, when a
// command finishes, and post-selected objects will be unselected.
// This this way of picking, it is possible to have a combination
// of pre-selected and post-selected. So, to make sure everything
// "looks the same", lets unselect everything before finishing
// the command.
for (var i = 0; i < go.ObjectCount; i++)
{
var rhino_object = go.Object(i).Object();
rhino_object?.Select(false);
}
doc.Views.Redraw();
}
var object_count = go.ObjectCount;
integer1 = option_integer1.CurrentValue;
integer2 = option_integer2.CurrentValue;
RhinoApp.WriteLine("Select object count: {0}", object_count);
RhinoApp.WriteLine("Value of integer1: {0}", integer1);
RhinoApp.WriteLine("Value of integer2: {0}", integer2);
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var gp = new GetObject();
gp.SetCommandPrompt("Select points to project");
gp.GeometryFilter = ObjectType.Point;
gp.GetMultiple(1, 0);
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var gm = new GetObject();
gm.SetCommandPrompt("Select mesh to project onto");
gm.GeometryFilter = ObjectType.Mesh;
gm.SubObjectSelect = false;
gm.EnablePreSelect(false, true);
gm.DeselectAllBeforePostSelect = false;
gm.Get();
if (gm.CommandResult() != Result.Success)
{
return(gm.CommandResult());
}
var mesh = gm.Object(0).Mesh();
if (null == mesh)
{
return(Result.Failure);
}
var meshes = new List <Mesh>(1)
{
mesh
};
var points = new List <Point3d>(gp.ObjectCount);
for (var i = 0; i < gp.ObjectCount; i++)
{
var point = gp.Object(i).Point();
if (null != point)
{
points.Add(point.Location);
}
}
var dir = -Vector3d.ZAxis;
var tol = doc.ModelAbsoluteTolerance;
int[] indices;
var project_points = Intersection.ProjectPointsToMeshesEx(meshes, points, dir, tol, out indices);
if (null != project_points)
{
for (int i = 0; i < project_points.Length; i++)
{
doc.Objects.AddPoint(project_points[i]);
doc.Objects.AddLine(project_points[i], points[indices[i]]);
}
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
using (var go = new GetObject())
{
go.SetCommandPrompt("Please select closed objects for converting to Honeybee Room");
//Only Brep is accepted, because we need to save meta data to sub-surface as well.
//Extrusion doesn't have sub-surface.
//all extrusion will be converted to Brep.
go.GeometryFilter = ObjectType.Brep | ObjectType.Extrusion;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
//check if any brep has been converted to Room
var optionSkipExistingRoom_toggle = new OptionToggle(true, "No_RecreateAllRooms", "Yes");
while (true)
{
go.ClearCommandOptions();
go.AddOptionToggle("SkipExistingRoom", ref optionSkipExistingRoom_toggle);
var rc = go.GetMultiple(1, 0);
if (rc == GetResult.Option)
{
go.EnablePreSelect(false, true);
continue;
}
else if (rc != GetResult.Object)
{
return(Result.Cancel);
}
if (go.ObjectsWerePreselected)
{
go.EnablePreSelect(false, true);
continue;
}
break;
}
if (go.CommandResult() != Result.Success)
{
return(Result.Failure);
}
if (go.ObjectCount == 0)
{
return(Result.Nothing);
}
var ifSkip = optionSkipExistingRoom_toggle.CurrentValue;
//Getting objects
var solidBreps = go.Objects().Where(_ => _.Brep() != null).Where(_ => _.Brep().IsSolid);
var objectToConvert = solidBreps;
if (ifSkip)
{
objectToConvert = solidBreps.Where(_ => !_.IsRoom()).ToList();
}
ConvertToRoom(doc, objectToConvert);
doc.Views.Redraw();
var count = objectToConvert.Count();
var msg = count > 1 ? $"{count} Honeybee rooms were created successfully!" : $"{count} Honeybee room was created successfully!";
RhinoApp.WriteLine(msg);
return(Result.Success);
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
const ObjectType geometryFilter = ObjectType.Surface | ObjectType.PolysrfFilter | ObjectType.Mesh;
GetObject go = new GetObject();
go.SetCommandPrompt("Select surfaces, polysurfaces, or meshes");
go.GeometryFilter = geometryFilter;
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
bool bHavePreselectedObjects = false;
for (; ;) // infinite loop
{
GetResult res = go.GetMultiple(1, 0);
if (res == GetResult.Option)
{
go.EnablePreSelect(false, true);
continue;
}
else if (res != GetResult.Object)
{
return(Result.Cancel);
}
if (go.ObjectsWerePreselected)
{
bHavePreselectedObjects = true;
go.EnablePreSelect(false, true);
continue;
}
break;
}
if (bHavePreselectedObjects)
{
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (null != rhinoObject)
{
rhinoObject.Select(false);
}
}
doc.Views.Redraw();
}
int objectCount = go.ObjectCount;
List <String> objectTypeList = new List <string>();
List <String> objectNameList = new List <string>();
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
string objectName = rhinoObject.Name;
if (null != rhinoObject)
{
objectTypeList.Add(rhinoObject.ObjectType.ToString());
objectNameList.Add(objectName);
}
}
RhinoApp.WriteLine(string.Format("Select object count = {0}", objectCount));
for (int i = 0; i < objectTypeList.Count; i++)
{
RhinoApp.WriteLine(string.Format("Select object Name : {0}, Type : {1}", objectNameList[i], objectTypeList[i]));
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// Command variables
var selectedObjects = new List <RhinoObject>();
string selectedSchema = "";
bool automatic = true;
bool directShape = false;
// Construct an objects getter
// This includes an option toggle for "Automatic" (true means automagic schema application, no directshapes)
var getObj = new GetObject();
getObj.SetCommandPrompt("Select geometry");
var toggleAutomatic = new OptionToggle(true, "Off", "On");
getObj.AddOptionToggle("Automatic", ref toggleAutomatic);
getObj.GroupSelect = true;
getObj.SubObjectSelect = false;
getObj.EnableClearObjectsOnEntry(false);
getObj.EnableUnselectObjectsOnExit(false);
getObj.DeselectAllBeforePostSelect = false;
// Get objects
for (; ;)
{
GetResult res = getObj.GetMultiple(1, 0);
if (res == GetResult.Option)
{
getObj.EnablePreSelect(false, true);
continue;
}
else if (res != GetResult.Object)
{
return(Result.Cancel);
}
if (getObj.ObjectsWerePreselected)
{
getObj.EnablePreSelect(false, true);
continue;
}
break;
}
selectedObjects = getObj.Objects().Select(o => o.Object()).ToList();
automatic = toggleAutomatic.CurrentValue;
// Construct an options getter if "Automatic" was set to "off"
if (!automatic)
{
// Construct an options getter for schema options
// This includes an option toggle for "DirectShape" (true will asign selected schema as the family)
// Also includes an option list of supported schemas
var getOpt = new GetOption();
getOpt.SetCommandPrompt("Select schema options. Press Enter when done");
var toggleDirectShape = new OptionToggle(false, "Off", "On");
var directShapeIndex = getOpt.AddOptionToggle("DirectShape", ref toggleDirectShape);
List <string> schemas = Enum.GetNames(typeof(SchemaObjectFilter.SupportedSchema)).ToList();
int schemaListOptionIndex = getOpt.AddOptionList("Schema", schemas, 0);
// Get options
while (getOpt.Get() == GetResult.Option)
{
if (getOpt.OptionIndex() == schemaListOptionIndex)
{
selectedSchema = schemas[getOpt.Option().CurrentListOptionIndex];
}
if (getOpt.OptionIndex() == directShapeIndex)
{
directShape = toggleDirectShape.CurrentValue;
}
}
}
// Apply schemas
if (automatic)
{
ApplySchemas(selectedObjects, doc);
}
else
{
ApplySchema(selectedObjects, selectedSchema, doc, directShape);
}
return(Result.Success);
}
