//Bill of Material
public override void Build()
{
Part part;
decimal pweight = FrameWorks.Functions.PanelWieghtS2000(m_subAssemblyWidth, m_subAssemblyHieght);
string labelStileR = string.Empty;
string labelStileL = string.Empty;
string labelTopRail = string.Empty;
string labelBotRail = string.Empty;
#region Sash
if (pweight <= 106.0m)
{
// Casement Hinge 995 T,996 B
labelStileR = "";
labelStileL = "";
labelTopRail = "M-996";
labelBotRail = "M-995";
}
else if (pweight > 106)
{
// Butt Hinge 665
labelStileR = "";
labelStileL = "M-665";
labelTopRail = "";
labelBotRail = "";
}
// StileR -->>
part = new Part(1167, "StileR", this, 1, m_subAssemblyHieght);
part.PartGroupType = "Sash-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = labelStileR;
m_parts.Add(part);
// StileL <<--
part = new Part(1167, "StileL", this, 1, m_subAssemblyHieght);
part.PartGroupType = "Sash-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = labelStileL;
m_parts.Add(part);
// RailT ^^
part = new Part(1167, "RailT", this, 1, m_subAssemblyWidth);
part.PartGroupType = "Sash-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = labelTopRail;
m_parts.Add(part);
// RailB ||
part = new Part(1167, "RailB", this, 1, m_subAssemblyWidth);
part.PartGroupType = "Sash-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = labelBotRail;
m_parts.Add(part);
#endregion
#region Filler
part = new Part(1816, "Filler-Top", this, 1, m_subAssemblyWidth + 0.25m);
part.PartGroupType = "Filler-Parts";
part.PartLabel = "";
m_parts.Add(part);
part = new Part(1817, "Filler-Bottom", this, 1, m_subAssemblyWidth + 0.25m);
part.PartGroupType = "Filler-Parts";
part.PartLabel = "";
m_parts.Add(part);
part = new Part(1816, "Filler-Left", this, 1, m_subAssemblyHieght + 0.25m);
part.PartGroupType = "Filler-Parts";
part.PartLabel = "";
m_parts.Add(part);
part = new Part(1813, "Filler-Right", this, 1, m_subAssemblyHieght + 0.25m);
part.PartGroupType = "Filler-Parts";
part.PartLabel = "";
m_parts.Add(part);
#endregion
#region Stop
// StopFrontLeft
part = new Part(809, "StopFrontLeft", this, 1, m_subAssemblyHieght - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopRearLeft
part = new Part(809, "StopRearLeft", this, 1, m_subAssemblyHieght - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopFrontRight
part = new Part(809, "StopFrontRight", this, 1, m_subAssemblyHieght - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopRearRight
part = new Part(809, "StopRearRight", this, 1, m_subAssemblyHieght - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopFrontTop
part = new Part(809, "StopFrontTop", this, 1, m_subAssemblyWidth - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopRearTop
part = new Part(809, "StopRearTop", this, 1, m_subAssemblyWidth - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopFrontBot
string crap;
crap = FrameWorks.Functions.StopWeepMachining(m_subAssemblyWidth - 2 * 1.3125m);
part = new Part(809, "StopFrontBot", this, 1, m_subAssemblyWidth - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "1)MiterEnds" + "\r\n" +
"2)" + crap;
m_parts.Add(part);
// StopRearBot
part = new Part(809, "StopRearBot", this, 1, m_subAssemblyWidth - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
#endregion
#region Glass
//Glass Panel
part = new Part(2828);
part.FunctionalName = "Glass";
part.PartGroupType = "Glass-Parts";
part.Qnty = 1;
part.PartName = "PartName";
part.PartLabel = "";
part.ContainerAssembly = this;
part.PartWidth = m_subAssemblyWidth - (1.625m * 2.0m);
part.PartLength = m_subAssemblyHieght - (1.625m * 2.0m);
m_parts.Add(part);
#endregion
#region Seal/Weatherstripping
decimal peri = FrameWorks.Functions.Perimeter(m_subAssemblyHieght, m_subAssemblyWidth);
//Sash Edge Seal
part = new Part(1769, "Edge Seal", this, 1, peri * 2.0m);
part.PartGroupType = "Seal-Parts";
part.PartLabel = "";
m_parts.Add(part);
peri = FrameWorks.Functions.Perimeter(m_subAssemblyHieght - 1.53125m, m_subAssemblyWidth - 1.53125m);
//Glazing Seals
part = new Part(1819, "Glazing Seal", this, 1, peri * 2.0m);
part.PartGroupType = "Seal-Parts";
part.PartLabel = "";
m_parts.Add(part);
#endregion
#region HardWare Logic
// PivotSetRHR
part = new Part(2110, "PivotSetRHR", this, 1, 0.0m);
part.PartGroupType = "Hardware-Parts";
part.PartLabel = "RHR";
m_parts.Add(part);
// TopPivotBacker
part = new Part(2553, "TopPivHngBacker", this, 1, 0.0m);
part.PartGroupType = "Hardware-Parts";
part.PartLabel = "";
m_parts.Add(part);
if (m_subAssemblyHieght > 72)
{
// IntermediatePivotBacker
part = new Part(2553, "IntrmdPivHngBkr", this, 1, m_subAssemblyHieght);
part.PartGroupType = "Hardware-Parts";
part.PartLabel = "";
m_parts.Add(part);
}
// BottomPivotBacker
part = new Part(2555, "BotPivHngBacker", this, 1, 0.0m);
part.PartGroupType = "Hardware-Parts";
part.PartLabel = "";
m_parts.Add(part);
// Assembly Braces
part = new Part(1117, "Assembly Braces", this, 8, 0.0m);
part.PartGroupType = "Hardware-Parts";
part.PartLabel = "";
m_parts.Add(part);
//LeverHoppe
FrameWorks.Makes.System3000.HoppeCasement hoppe = new FrameWorks.Makes.System3000.HoppeCasement(m_subAssemblyHieght, this);
foreach (Part innerpart in hoppe.Parts)
{
//inner
this.Parts.Add(innerpart);
}
#endregion
#region Labor
part = new LPart("Design", this, 4.0m, 80.0m);
m_parts.Add(part);
//Collect Information on Sizes: Measure: Provide Information for Approval: Order: Supervision
part = new LPart("Draft", this, 3.0m, 80.0m);
m_parts.Add(part);
//Typical Drawings
part = new LPart("MetalHours", this, 12.0m, 80.0m);
m_parts.Add(part);
//1 Recieve: 1 Handle: 1 CutSash: 1 CutGlassStop: 1.5 Machine: 1.5 Hardware Prep: 1 Mount Hardware: 4 Weld:
part = new LPart("Finish", this, 4.0m, 80.0m);
m_parts.Add(part);
//2 Sand Linegrain: 2 Finish:
part = new LPart("Glazing", this, (this.Area * .10m) + 4.5m, 80.0m);
m_parts.Add(part);
//0.5 Order: 0.5 Recieve: 1.0 Inspect/Reject: 0.5 Store/Handle: 0.5 SetGlass/Shim&Calk: 0.5 Set GlassStop: 0.5 GlazingSeals
part = new LPart("Prehang", this, (this.Area * .10m) + 3.0m, 80.0m);
m_parts.Add(part);
//2 FitSash into Frame: 1 Mount Weather Strips/Seals
part = new LPart("Stage", this, 1.0m, 80.0m);
m_parts.Add(part);
//1 Stage
part = new LPart("Load", this, 1.0m, 80.0m);
m_parts.Add(part);
//1 Load
#endregion
}
//Bill of Material
public override void Build()
{
Part part;
decimal pweight = FrameWorks.Functions.PanelWieghtS2000(m_subAssemblyWidth, m_subAssemblyHieght);
string labelStileR = string.Empty;
string labelStileL = string.Empty;
string labelTopRail = string.Empty;
string labelBotRail = string.Empty;
#region Sash
if (pweight <= 106.0m)
{
// Casement Hinge 995 T,996 B
labelStileR = "";
labelStileL = "";
labelTopRail = "M-996";
labelBotRail = "M-995";
}
else if (pweight > 106)
{
// Butt Hinge 665
labelStileR = "";
labelStileL = "M-665";
labelTopRail = "";
labelBotRail = "";
}
// StileR -->>
part = new Part(1167, "StileR", this, 1, m_subAssemblyHieght);
part.PartGroupType = "Sash-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = labelStileR;
m_parts.Add(part);
// StileL <<--
part = new Part(1167, "StileL", this, 1, m_subAssemblyHieght);
part.PartGroupType = "Sash-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = labelStileL;
m_parts.Add(part);
// RailT ^^
part = new Part(1167, "RailT", this, 1, m_subAssemblyWidth);
part.PartGroupType = "Sash-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = labelTopRail;
m_parts.Add(part);
// RailB ||
part = new Part(1167, "RailB", this, 1, m_subAssemblyWidth);
part.PartGroupType = "Sash-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = labelBotRail;
m_parts.Add(part);
#endregion
#region Stop
// StopFrontLeft
part = new Part(809, "StopFrontLeft", this, 1, m_subAssemblyHieght - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopRearLeft
part = new Part(809, "StopRearLeft", this, 1, m_subAssemblyHieght - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopFrontRight
part = new Part(809, "StopFrontRight", this, 1, m_subAssemblyHieght - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopRearRight
part = new Part(809, "StopRearRight", this, 1, m_subAssemblyHieght - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopFrontTop
part = new Part(809, "StopFrontTop", this, 1, m_subAssemblyWidth - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopRearTop
part = new Part(809, "StopRearTop", this, 1, m_subAssemblyWidth - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
// StopFrontBot
string crap;
crap = FrameWorks.Functions.StopWeepMachining(m_subAssemblyWidth - 2 * 1.3125m);
part = new Part(809, "StopFrontBot", this, 1, m_subAssemblyWidth - 2 * 1.3125m);
part.PartGroupType = "GlassStop-Parts";
part.PartLabel = "1)MiterEnds" + "\r\n" +
"2)" + crap;
m_parts.Add(part);
// StopRearBot
part = new Part(809, "StopRearBot", this, 1, m_subAssemblyWidth - 2 * 1.3125m);
part.PartGroupType = "Stop-Parts";
part.PartLabel = "MiterEnds";
m_parts.Add(part);
#endregion
#region Muntin
// MuntinBarExtV1 ||
part = new Part(1862, "MuntinBarExtV1", this, 1, m_subAssemblyHieght - 2.0m * 2.0625m);
part.PartGroupType = "Muntin-Parts";
part.PartLabel = "";
m_parts.Add(part);
// MuntinBarIntV1 ||
part = new Part(1862, "MuntinBarIntV1", this, 1, m_subAssemblyHieght - 2.0m * 2.0625m);
part.PartGroupType = "Muntin-Parts";
part.PartLabel = "";
m_parts.Add(part);
// MuntinBarExtV2 ||
part = new Part(1862, "MuntinBarExtV2", this, 1, m_subAssemblyHieght - 2.0m * 2.0625m);
part.PartGroupType = "Muntin-Parts";
part.PartLabel = "";
m_parts.Add(part);
// MuntinBarIntV2 ||
part = new Part(1862, "MuntinBarIntV2", this, 1, m_subAssemblyHieght - 2.0m * 2.0625m);
part.PartGroupType = "Muntin-Parts";
part.PartLabel = "";
m_parts.Add(part);
#endregion
#region FoamTape
// Foam Tape Vertical || #2808
part = new Part(2808, "FoamTape", this, 4, m_subAssemblyHieght - 2.0m * 2.0625m);
part.PartGroupType = "FoamTape-Parts";
part.PartLabel = "";
m_parts.Add(part);
#endregion
#region Glass
//Glass Panel
part = new Part(2828);
part.FunctionalName = "Glass";
part.PartGroupType = "Glass-Parts";
part.Qnty = 1;
part.PartName = "PartName";
part.PartLabel = "";
part.ContainerAssembly = this;
part.PartWidth = m_subAssemblyWidth - (1.625m * 2.0m);
part.PartLength = m_subAssemblyHieght - (1.625m * 2.0m);
m_parts.Add(part);
#endregion
#region Seal/Weatherstripping
decimal peri = FrameWorks.Functions.Perimeter(m_subAssemblyHieght, m_subAssemblyWidth);
//Sash Edge Seal
part = new Part(1769, "Edge Seal", this, 1, peri * 2.0m);
part.PartGroupType = "Seal-Parts";
part.PartLabel = "";
m_parts.Add(part);
peri = FrameWorks.Functions.Perimeter(m_subAssemblyHieght - 1.53125m, m_subAssemblyWidth - 1.53125m);
//Glazing Seals
part = new Part(1819, "Glazing Seal", this, 1, peri * 2.0m);
part.PartGroupType = "Seal-Parts";
part.PartLabel = "";
m_parts.Add(part);
#endregion
#region Hardware
if (pweight <= 106.0m)
{
// Casement Hinge
part = new Part(995, "Casement Hinge", this, 1, 0m);
part.PartGroupType = "Hardware-Parts";
part.PartWidth = part.Source.Width;
part.PartThick = part.Source.Height;
part.PartLabel = "";
m_parts.Add(part);
// Casement Hinge
part = new Part(996, "Casement Hinge", this, 1, 0m);
part.PartGroupType = "Hardware-Parts";
part.PartLabel = "";
m_parts.Add(part);
}
else if (pweight > 106.0m)
{
// Butt Hinge
int hcount = FrameWorks.Functions.HingeCount(m_subAssemblyHieght);
part = new Part(665, "HD Hinge", this, hcount, 0m);
part.PartGroupType = "Hardware-Parts";
part.PartLabel = "";
m_parts.Add(part);
}
FrameWorks.Makes.System3000.HoppeCasement hoppe = new FrameWorks.Makes.System3000.HoppeCasement(m_subAssemblyHieght, this);
foreach (Part innerpart in hoppe.Parts)
{
//inner
this.Parts.Add(innerpart);
}
//LeverHoppe
#endregion
#region Labor
part = new LPart("Design", this, 4.0m, 80.0m);
m_parts.Add(part);
// Measure: Collect Information on Sizes from Contractor:
// Provide Information for Approval:
// Samples Correspondence: Ordering: Supervision
part = new LPart("Draft", this, 3.0m, 80.0m);
m_parts.Add(part);
//Typical Drawings: Supervision
part = new LPart("MetalHours", this, 8.0m, 80.0m);
m_parts.Add(part);
//1 Receive: 1 Handle: 1 Cut: 1 Machine: 2 Weld & Assemble: 1 Hardware Prep: 1 NailFin
part = new LPart("MuntinHours", this, 6.0m, 80.0m);
m_parts.Add(part);
//.5 Per Bar this 12 Bars:
part = new LPart("GlazingHours", this, (this.Area * 0.1m) + 4.5m, 80.0m);
m_parts.Add(part);
//.5 Recieve: 1.0 InspectReject: .5 StoreHandle: 1.0 GlazeShimCalk: .5 SetGlassStop: 05 InsertGasket
part = new LPart("FinishHours", this, 4.0m, 80.0m);
m_parts.Add(part);
//2 SandLineGrain: 2 Finish
part = new LPart("Stage", this, 0.5m, 80.0m);
m_parts.Add(part);
//.5 Stage
part = new LPart("Load", this, 1.0m, 80.0m);
m_parts.Add(part);
//1 Load
#endregion
}
