public Tuple <short, string> ReadNoticeRange(ushort flib, ref List <ReadNoticeResultItemModel> data)
{
if (data == null)
{
return(new Tuple <short, string>(-100, "读取操作信息信号错误,数据存储区域过小"));
}
Focas1.OPMSG3 opmsg = new Focas1.OPMSG3();
short opmsg_num = 5;
var ret = Focas1.cnc_rdopmsg3(flib, -1, ref opmsg_num, opmsg);
if (ret == 0)
{
for (int i = 0; i < opmsg_num; i++)
{
try
{
string strdata = "msg" + (i + 1).ToString();
object op = opmsg.GetType().GetField(strdata).GetValue(opmsg);
short op_no = short.Parse(op.GetType().GetField("datano").GetValue(op).ToString());
short op_type = short.Parse(op.GetType().GetField("type").GetValue(op).ToString());
string op_msg = op.GetType().GetField("data").GetValue(op).ToString();
if (op_no != -1)
{
data.Add(new ReadNoticeResultItemModel {
Num = op_no, Ttype = op_type, Message = op_msg
});
}
}
catch
{
new Tuple <short, string>(-100, "读取操作信息信号错误,数据处理出错");
}
}
return(new Tuple <short, string>(0, null));
}
return(new Tuple <short, string>(ret, $"读取操作信息信号错误,返回:{ret}"));
}
//------------------------------------------------------------------------------------------------------------------//
//---------------------------------- Get Changed Values -----------------------------------------------------------//
//------------------------------------------------------------------------------------------------------------------//
public void getChangedValues(MachineTool machineTool)
{
mAdapter.Begin();
// Display if machine is available
if (machineTool.connected)
{
mAvail.Value = "AVAILABLE";
// Display Active Process
Focas1.cnc_getpath(machineTool.hFanucMonitor, out path, out maxPath);
if (path == 1)
{
mSelProc.Value = "1";
}
else if (path == 2)
{
mSelProc.Value = "2";
}
//--------------------------------------------------------------------------------------------------------------
// Display Active Part Program & Sub-Program
short ret2 = Focas1.cnc_rdexecprog(machineTool.hFanucMonitor, ref length, out blkNum, lineData);
mBlkNum.Value = blkNum.ToString();
mActiveLine.Value = GetProgramName(lineData, "\n");
//--------------------------------------------------------------------------------------------------------------
Focas1.cnc_rdprgnum(machineTool.hFanucMonitor, subProgram);
mSubProgram.Value = subProgram.data.ToString();
//--------------------------------------------------------------------------------------------------------------
int ret = Focas1.cnc_exeprgname(machineTool.hFanucMonitor, mainProgram);
//string progName = mainProgram.name.ToString();
mProgram.Value = GetProgramName(mainProgram.name, "\0");
//--------------------------------------------------------------------------------------------------------------
/*uint lineToReadFrom = 1;
string progData = string.Empty;
uint linesToRead = 5;
uint charToRead = 100;
Focas1.cnc_rdprogline2(machineTool.hFanucMonitor, mainProgram.o_num, lineToReadFrom, progData, ref linesToRead, ref charToRead);*/
//--------------------------------------------------------------------------------------------------------------
// Display the current selected mode
switch (machineTool.fanucStatus.aut)
{
case 0:
{
mMode.Value = "MDI";
break;
}
case 1:
{
mMode.Value = "AUTO";
break;
}
case 3:
{
mMode.Value = "EDIT";
break;
}
case 4:
{
mMode.Value = "HAND WHEEL";
break;
}
case 5:
{
mMode.Value = "JOG";
break;
}
case 6:
{
mMode.Value = "TEACH JOG";
break;
}
case 7:
{
mMode.Value = "TEACH HANDLE";
break;
}
case 8:
{
mMode.Value = "INC FEED";
break;
}
case 9:
{
mMode.Value = "REFERENCE";
break;
}
case 10:
{
mMode.Value = "REMOTE";
break;
}
}
//--------------------------------------------------------------------------------------------------------------
// Currently Selected Table
mSelTable.Value = 0;
//--------------------------------------------------------------------------------------------------------------
// Current Active Tool
if (machineTool.gifuChanger == false)
{
Focas1.pmc_rdpmcrng(machineTool.hFanucMonitor, addrType, dataType, toolData, toolData, dataLength,
pmcData);
mActiveTool.Value = pmcData.cdata[0].ToString();
}
else
{
Focas1.ODBM macroInfo = new Focas1.ODBM();
Focas1.cnc_rdmacro(machineTool.hFanucMonitor, 276, 10, macroInfo);
float toolNum = macroInfo.mcr_val / (10 ^ macroInfo.dec_val);
mActiveTool.Value = toolNum.ToString();
}
//--------------------------------------------------------------------------------------------------------------
// Display Alarms
alarmNum = 10;
ret = Focas1.cnc_rdalmmsg2(machineTool.hFanucMonitor, -1, ref alarmNum, alarmMsg);
alarm[0] = alarmMsg.msg1.alm_msg;
alarm[1] = alarmMsg.msg2.alm_msg;
alarm[2] = alarmMsg.msg3.alm_msg;
alarm[3] = alarmMsg.msg4.alm_msg;
alarm[4] = alarmMsg.msg5.alm_msg;
alarm[5] = alarmMsg.msg6.alm_msg;
alarm[6] = alarmMsg.msg7.alm_msg;
alarm[7] = alarmMsg.msg8.alm_msg;
alarm[8] = alarmMsg.msg9.alm_msg;
alarm[9] = alarmMsg.msg10.alm_msg;
alarm[0] = alarm[0].Substring(0, alarmMsg.msg1.msg_len);
alarm[1] = alarm[1].Substring(0, alarmMsg.msg2.msg_len);
alarm[2] = alarm[2].Substring(0, alarmMsg.msg3.msg_len);
alarm[3] = alarm[3].Substring(0, alarmMsg.msg4.msg_len);
alarm[4] = alarm[4].Substring(0, alarmMsg.msg5.msg_len);
alarm[5] = alarm[5].Substring(0, alarmMsg.msg6.msg_len);
alarm[6] = alarm[6].Substring(0, alarmMsg.msg7.msg_len);
alarm[7] = alarm[7].Substring(0, alarmMsg.msg8.msg_len);
alarm[8] = alarm[8].Substring(0, alarmMsg.msg9.msg_len);
alarm[9] = alarm[9].Substring(0, alarmMsg.msg10.msg_len);
alarmType[0] = almType(alarmMsg.msg1.type);
alarmType[1] = almType(alarmMsg.msg2.type);
alarmType[2] = almType(alarmMsg.msg3.type);
alarmType[3] = almType(alarmMsg.msg4.type);
alarmType[4] = almType(alarmMsg.msg5.type);
alarmType[5] = almType(alarmMsg.msg6.type);
alarmType[6] = almType(alarmMsg.msg7.type);
alarmType[7] = almType(alarmMsg.msg8.type);
alarmType[8] = almType(alarmMsg.msg9.type);
alarmType[9] = almType(alarmMsg.msg10.type);
alarmNumber[0] = alarmMsg.msg1.alm_no.ToString() + ": ";
alarmNumber[1] = alarmMsg.msg2.alm_no.ToString() + ": ";
alarmNumber[2] = alarmMsg.msg3.alm_no.ToString() + ": ";
alarmNumber[3] = alarmMsg.msg4.alm_no.ToString() + ": ";
alarmNumber[4] = alarmMsg.msg5.alm_no.ToString() + ": ";
alarmNumber[5] = alarmMsg.msg6.alm_no.ToString() + ": ";
alarmNumber[6] = alarmMsg.msg7.alm_no.ToString() + ": ";
alarmNumber[7] = alarmMsg.msg8.alm_no.ToString() + ": ";
alarmNumber[8] = alarmMsg.msg9.alm_no.ToString() + ": ";
alarmNumber[9] = alarmMsg.msg10.alm_no.ToString() + ": ";
for (short i = 0; i < alarmType.Length; i++)
{
if (alarmType[i] == "SW" && alarm[i].ToString() == string.Empty)
{
alarmType[i] = string.Empty;
alarm[i] = string.Empty;
alarmNumber[i] = string.Empty;
}
}
mAlarm1.Value = alarmType[0].ToString() + alarmNumber[0] + alarm[0].ToString();
mAlarm2.Value = alarmType[1].ToString() + alarmNumber[1] + alarm[1].ToString();
mAlarm3.Value = alarmType[2].ToString() + alarmNumber[2] + alarm[2].ToString();
mAlarm4.Value = alarmType[3].ToString() + alarmNumber[3] + alarm[3].ToString();
mAlarm5.Value = alarmType[4].ToString() + alarmNumber[4] + alarm[4].ToString();
mAlarm6.Value = alarmType[5].ToString() + alarmNumber[5] + alarm[5].ToString();
mAlarm7.Value = alarmType[6].ToString() + alarmNumber[6] + alarm[6].ToString();
mAlarm8.Value = alarmType[7].ToString() + alarmNumber[7] + alarm[7].ToString();
mAlarm9.Value = alarmType[8].ToString() + alarmNumber[8] + alarm[8].ToString();
mAlarm10.Value = alarmType[9].ToString() + alarmNumber[9] + alarm[9].ToString();
//--------------------------------------------------------------------------------------------------------------
// Clocks
Focas1.cnc_rdparam(machineTool.hFanucMonitor, 6758, 0, 8, cycTimeMin);
Focas1.cnc_rdparam(machineTool.hFanucMonitor, 6757, 0, 8, cycTimeSec);
mCycleTime.Value = cycTimeMin.cdata.ToString() + "." + (cycTimeSec.ldata / 1000).ToString();
//Focas1.cnc_rdtimer(machineTool.hFanucLib, 1, cycleTime);
// mOpTime.Value = cycleTime.minute.ToString() + "." + cycleTime.msec.ToString();
//--------------------------------------------------------------------------------------------------------------
// Display Feed, Speed overrides
ret = Focas1.pmc_rdpmcrng(machineTool.hFanucMonitor, 0, 0, 96, 96, 16, pmcOverrides);
mFeedOv.Value = (255-pmcOverrides.cdata[0]).ToString();
ret = Focas1.pmc_rdpmcrng(machineTool.hFanucMonitor, 0, 0, 30, 30, 16, pmcOverrides);
mSpeedOv.Value = pmcOverrides.cdata[0].ToString();
//--------------------------------------------------------------------------------------------------------------
// Display Programmed Feed & Speed
mPrgFeed.Value = "0";
mPrgSpeed.Value = "0";
//--------------------------------------------------------------------------------------------------------------
// Check the current feed rates
Focas1.ODBACT feedRate = new Focas1.ODBACT();
Focas1.cnc_actf(machineTool.hFanucMonitor, feedRate);
mRealFeed.Value = (feedRate.data / 10000).ToString();
//--------------------------------------------------------------------------------------------------------------
// Check Spindle Speed
Focas1.ODBACT2 spindleSpeed = new Focas1.ODBACT2();
Focas1.cnc_acts2(machineTool.hFanucMonitor, 1, spindleSpeed);
mRealSpeed.Value = (spindleSpeed.data[0] / 10000).ToString();
//--------------------------------------------------------------------------------------------------------------
// Get Drives Ready
int ret3 = Focas1.pmc_rdpmcrng(machineTool.hFanucMonitor, 1, 0, 1, 1, 16, pmcDrivesOn);
driveReady = GetBit(pmcDrivesOn.cdata[0], 7, true);
mDrivesReady.Value = driveReady ? "Ready" : "Not Ready";
//--------------------------------------------------------------------------------------------------------------
// Get Messages
Focas1.OPMSG3 opmsg = new Focas1.OPMSG3();
short msgSize = 5;
Focas1.cnc_rdopmsg3(machineTool.hFanucMonitor, -1, ref msgSize, opmsg);
// Op Message 1
if (opmsg.msg1.datano != 0 && opmsg.msg1.datano != -1)
{
mOpMsg1.Value = opmsg.msg1.data.ToString();
}
else
{
mOpMsg1.Value = string.Empty;
}
// Op Message 2
if (opmsg.msg2.datano != 0 && opmsg.msg2.datano != -1)
{
mOpMsg2.Value = opmsg.msg2.data.ToString();
}
else
{
mOpMsg2.Value = string.Empty;
}
// Op Message 3
if (opmsg.msg3.datano != 0 && opmsg.msg3.datano != -1)
{
mOpMsg3.Value = opmsg.msg3.data.ToString();
}
else
{
mOpMsg3.Value = string.Empty;
}
// Op Message 4
if (opmsg.msg4.datano != 0 && opmsg.msg4.datano != -1)
{
mOpMsg4.Value = opmsg.msg4.data.ToString();
}
else
{
mOpMsg4.Value = string.Empty;
}
//--------------------------------------------------------------------------------------------------------------
// Get Drives On
ret3 = Focas1.pmc_rdpmcrng(machineTool.hFanucMonitor, 1, 0, 0, 0, 16, pmcDrivesOn);
drivesOn = GetBit(pmcDrivesOn.cdata[0], 2);
mDrivesOn.Value = drivesOn ? "Drives On" : "Drives Off";
//--------------------------------------------------------------------------------------------------------------
// If Drives are not on and we have a reason set already, figure out how long we have been in estop
if (!drivesOn && reasonSet)
{
mDownTimeDuration.Value = dt.GetElapsedDownTime(ref totalElapsedDT);
}
// If the drives are not on and we do not have a reason set, show the reason popup box
// And start our downtime counter. Also set reason to true.
if (!drivesOn && !reasonSet)
{
machineTool.Invoke((MethodInvoker)delegate() { dt.Show(); });
startTime = dt.startDownTimeCounter();
reasonSet = true;
}
// If the drives are on (We have cleared all the errors), and we have a reason set (We just came out of estop)
// So we will get the duration of the downtime, the reason for the downtime and record it.
if (drivesOn && reasonSet)
{
duration = dt.GetElapsedDownTime(ref totalElapsedDT);
endTime = dt.stopDownTimeCounter();
mDTReason.Value = dt.reason;
// Log the Downtime here
dtBuffer = true;
BufferDataItems();
dtBuffer = false;
reasonSet = false;
}
if (mDTReason.Value != string.Empty)
{
// Now that we are back in our normal loop, the reason is no longer needed
// So now we set it to an empty string and set it to the reason for the last
// Downtime period that we had.
mDTLastReason.Value = dt.reason;
mDTReason.Value = string.Empty;
mDownTimeDuration.Value = string.Empty;
mLastDownTimeDuration.Value = duration;
}
//---------------------------------------------------------------------------------------------------------------
// Get Feed Hold
// Vac On / Off
Focas1.IODBPMC0 vacSensors = new Focas1.IODBPMC0();
ret3 = Focas1.pmc_rdpmcrng(machineTool.hFanucMonitor, 5, 0, 46,46, 16, vacSensors);
bool vac1 = GetBit(vacSensors.cdata[0], 1, false);
bool vac2 = GetBit(vacSensors.cdata[0], 2, false);
bool vac3 = GetBit(vacSensors.cdata[0], 3, false);
bool vac4 = GetBit(vacSensors.cdata[0], 4, false);
bool vac5 = GetBit(vacSensors.cdata[0], 5, false);
bool vac6 = GetBit(vacSensors.cdata[0], 6, false);
bool vac7 = GetBit(vacSensors.cdata[0], 7, false);
bool vac8 = GetBit(vacSensors.cdata[0], 8, false);
}
else
{
mAvail.Value = "UNAVAILABLE";
}
}
