private void BtnConnect_Click(object sender, EventArgs e)
{
if (tbId1.Enabled || tbId2.Enabled)
{
Elms = new List <Element>();
var b1 = int.TryParse(tbId1.Text.Trim(), out var id1);
var b2 = int.TryParse(tbId2.Text.Trim(), out var id2);
var ids = new FilteredElementCollector(Uidoc.Document)
.ToElementIds()
.Select(s => s.IntegerValue)
.ToList();
if (b1 && b2 && ids.Contains(id1) && ids.Contains(id2))
{
var elm1 = Uidoc.Document.GetElement(new ElementId(id1));
var elm2 = Uidoc.Document.GetElement(new ElementId(id2));
Elms.Add(elm1);
Elms.Add(elm2);
}
}
DialogResult = DialogResult.OK;
Close();
}
/// <summary>
/// 生成单管选管标注
/// </summary>
/// <param name="datadoc"></param>
private void GenerateSinglePipeTag(Document savedoc, Document datadoc)
{
DelegateHelper.DelegateTransaction(savedoc, "一键单管直径标注", () =>
{
var pipeIdInThisViews = new FilteredElementCollector(datadoc, View.Id).OfCategory(BuiltInCategory.OST_PipeTags)
.WhereElementIsNotElementType()
.Select(c => (c as IndependentTag).TaggedLocalElementId).ToList().Distinct();
var pipes = new FilteredElementCollector(datadoc).OfCategory(BuiltInCategory.OST_PipeCurves).WhereElementIsNotElementType().ToList();
foreach (var pipe in pipes)
{
//0728长度过滤
if (!CheckFilter(pipe))
{
continue;
}
if (!pipeIdInThisViews.Contains(pipe.Id))
{
var setting = PipeAnnotationCmd.PipeAnnotationUIData.SettingForSingle;
var headerPoint = setting.GetHeaderPoint(pipe as Pipe);
var tag = savedoc.Create.NewTag(View, pipe, setting.NeedLeader, TagMode.TM_ADDBY_CATEGORY, TagOrientation.Horizontal, headerPoint);
}
}
return(true);
});
}
private void BtnLocate_Click(object sender, EventArgs e)
{
var b1 = int.TryParse(tbId1.Text.Trim(), out var id1);
var b2 = int.TryParse(tbId2.Text.Trim(), out var id2);
var b3 = int.TryParse(tbId1.Text.Trim(), out var id3);
var b4 = int.TryParse(tbId2.Text.Trim(), out var id4);
var b5 = int.TryParse(tbId1.Text.Trim(), out var id5);
var ids = new FilteredElementCollector(Uidoc.Document)
.ToElementIds()
.Select(s => s.IntegerValue)
.ToList();
if (b1 && ids.Contains(id1))
{
Elms.Add(Uidoc.Document.GetElement(new ElementId(id1)));
}
if (b2 && ids.Contains(id2))
{
Elms.Add(Uidoc.Document.GetElement(new ElementId(id2)));
}
if (b3 && ids.Contains(id3))
{
Elms.Add(Uidoc.Document.GetElement(new ElementId(id3)));
}
if (b4 && ids.Contains(id4))
{
Elms.Add(Uidoc.Document.GetElement(new ElementId(id4)));
}
if (b5 && ids.Contains(id5))
{
Elms.Add(Uidoc.Document.GetElement(new ElementId(id5)));
}
DialogResult = DialogResult.OK;
Close();
}
public View ReferenceViews()
{
View viewrf = null;
View view = doc.ActiveView;
FilteredElementCollector viewersCollector = new FilteredElementCollector(doc);
viewersCollector.OfCategory(BuiltInCategory.OST_Viewers);
Element elem = null;
foreach (Element e in viewersCollector)
{
if (e.Name == view.Name)
{
elem = e;
}
}
if (elem != null)
{
DateTime start = DateTime.Now;
FilterableValueProvider provider = new ParameterValueProvider(new ElementId(BuiltInParameter.VIEWPORT_SHEET_NUMBER));
FilterRule rule = new FilterStringRule(provider, new FilterStringGreater(), string.Empty, false);
ElementParameterFilter epf = new ElementParameterFilter(rule, false);
FilteredElementCollector viewCol = new FilteredElementCollector(doc).WherePasses(epf);
viewCol.OfClass(typeof(View));
StringBuilder sb = new StringBuilder();
foreach (View v in viewCol)
{
if (v.Id.IntegerValue == view.Id.IntegerValue || v.IsTemplate || v.ViewType == ViewType.DrawingSheet || v.ViewType == ViewType.ColumnSchedule)
{
continue;
}
try
{
ICollection <ElementId> col = new FilteredElementCollector(doc, v.Id).ToElementIds();
if (col.Contains(elem.Id))
{
sb.AppendLine("View: " + v.Name);
}
viewrf = v;
}
catch { }
}
}
return(viewrf);
}
//----------------------------------------------------------
public void Data_Pick_Element(UIDocument uidoc, Document doc,
RadioButton center_mid_point, RadioButton line, RadioButton arc, RadioButton ellipse, RadioButton pick)
{
mySource = new ListSource();
Selection selection = uidoc.Selection;
if (center_mid_point.IsChecked == true && center_mid_point.IsEnabled == true)
{
List <XYZ> support = new List <XYZ>();
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select center point"));
data_point = new geometry_data()
{
name = mySource.list_option_selection_name[0],
list_point = support
};
}
if (line.IsChecked == true)
{
List <XYZ> support = new List <XYZ>();
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select start point"));
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select end point"));
data_point = new geometry_data()
{
name = mySource.list_option_selection_name[1],
list_point = support
};
}
if (arc.IsChecked == true && arc.IsEnabled == true)
{
List <XYZ> support = new List <XYZ>();
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select center point"));
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select start point"));
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select end point, not same start point"));
data_point = new geometry_data()
{
name = mySource.list_option_selection_name[2],
list_point = support
};
}
if (ellipse.IsChecked == true && ellipse.IsEnabled == true)
{
List <XYZ> support = new List <XYZ>();
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select start point define radius x"));
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select end point define radius x"));
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select start point define radius y"));
support.Add(selection.PickPoint(ObjectSnapTypes.Endpoints | ObjectSnapTypes.Midpoints | ObjectSnapTypes.Centers | ObjectSnapTypes.Intersections | ObjectSnapTypes.Perpendicular | ObjectSnapTypes.Nearest | ObjectSnapTypes.Quadrants, "Select end point define radius y"));
data_point = new geometry_data()
{
name = mySource.list_option_selection_name[3],
list_point = support
};
}
if (pick.IsChecked == true)
{
var refe = selection.PickObject(ObjectType.PointOnElement, "Select reference of element");
Element element = doc.GetElement(refe);
GeometryObject geometry = element.GetGeometryObjectFromReference(refe);
List <string> my_cad_link = new FilteredElementCollector(doc).OfClass(typeof(CADLinkType)).Cast <CADLinkType>().Select(x => x.Name).ToList();
if (my_cad_link.Count() > 0 && my_cad_link.Contains(doc.GetElement(element.UniqueId).Category.Name))
{
GeometryElement elem = element.get_Geometry(new Options());
if (elem != null)
{
foreach (GeometryObject geometryObject in elem)
{
GeometryInstance gInstance = geometryObject as GeometryInstance;
if (null != gInstance)
{
origin = gInstance.Transform.Origin;
}
}
}
}
if (geometry is Line)
{
Line polyLine = geometry as Line;
data_point = new geometry_data()
{
name = mySource.list_option_selection_name[4],
line = polyLine
};
}
else if (geometry is PolyLine)
{
PolyLine polyLine = geometry as PolyLine;
data_point = new geometry_data()
{
name = mySource.list_option_selection_name[5],
polyLine = polyLine
};
}
else if (geometry is Arc)
{
Arc polyLine = geometry as Arc;
data_point = new geometry_data()
{
name = mySource.list_option_selection_name[6],
arc = polyLine
};
}
else if (geometry is Ellipse)
{
Ellipse polyLine = geometry as Ellipse;
data_point = new geometry_data()
{
name = mySource.list_option_selection_name[6],
ellipse = polyLine
};
}
}
}
/// <summary>
/// Выполнить процедуру слияния выбранных размеров
/// </summary>
public void MergeExecute()
{
var selection = _application.ActiveUIDocument.Selection;
var doc = _application.ActiveUIDocument.Document;
var prompt = Language.GetItem(new ModPlusConnector().Name, "h1");
const double tol = 0.0001;
var elementsIds = new FilteredElementCollector(doc, doc.ActiveView.Id)
.WhereElementIsNotElementType()
.Select(e => e.Id.IntegerValue)
.ToList();
while (true)
{
try
{
var dimensions = selection
.PickElementsByRectangle(new DimensionsFilter(), prompt)
.OfType <Dimension>().ToList();
var byDimLineDictionary = new Dictionary <Line, List <Dimension> >();
foreach (var dimension in dimensions)
{
if (!(dimension.Curve is Line line))
{
continue;
}
var isMatch = false;
foreach (var pair in byDimLineDictionary)
{
if ((Math.Abs(pair.Key.Origin.DistanceTo(line.Origin)) < tol &&
Math.Abs(Math.Abs(pair.Key.Direction.DotProduct(line.Direction)) - 1) < tol) ||
Math.Abs(Math.Abs(pair.Key.Direction.DotProduct(Line.CreateBound(pair.Key.Origin, line.Origin).Direction)) - 1) < tol)
{
isMatch = true;
pair.Value.Add(dimension);
break;
}
}
if (!isMatch)
{
byDimLineDictionary.Add(line, new List <Dimension> {
dimension
});
}
}
var transactionName = Language.GetFunctionLocalName(new ModPlusConnector());
if (string.IsNullOrEmpty(transactionName))
{
transactionName = "Merge dimensions";
}
using (var t = new TransactionGroup(doc, transactionName))
{
t.Start();
foreach (var pair in byDimLineDictionary)
{
if (pair.Value.Count < 1)
{
continue;
}
try
{
using (var tr = new Transaction(doc, "Merge dims"))
{
tr.Start();
var referenceArray = new ReferenceArray();
var view = pair.Value.First().View;
var type = pair.Value.First().DimensionType;
var dimsData = new List <DimData>();
foreach (var d in pair.Value)
{
if (d.NumberOfSegments > 0)
{
dimsData.AddRange(from DimensionSegment segment in d.Segments select new DimData(segment));
}
else
{
dimsData.Add(new DimData(d));
}
foreach (Reference reference in d.References)
{
if (reference.ElementId != ElementId.InvalidElementId &&
!elementsIds.Contains(reference.ElementId.IntegerValue))
{
continue;
}
if (reference.ElementId != ElementId.InvalidElementId &&
doc.GetElement(reference.ElementId) is Grid grid)
{
referenceArray.Append(new Reference(grid));
}
else if (reference.ElementId != ElementId.InvalidElementId &&
doc.GetElement(reference.ElementId) is Level level)
{
referenceArray.Append(new Reference(level));
}
else
{
referenceArray.Append(reference);
}
}
}
if (doc.Create.NewDimension(view, pair.Key, referenceArray, type) is Dimension createdDimension)
{
if (ModPlus_Revit.Utils.Dimensions.TryRemoveZeroes(createdDimension, out referenceArray))
{
if (doc.Create.NewDimension(view, pair.Key, referenceArray, type) is Dimension reCreatedDimension)
{
doc.Delete(createdDimension.Id);
RestoreTextFields(reCreatedDimension, dimsData);
}
}
else
{
RestoreTextFields(createdDimension, dimsData);
}
doc.Delete(pair.Value.Select(d => d.Id).ToList());
}
tr.Commit();
}
}
catch (Exception exception)
{
ExceptionBox.Show(exception);
}
}
t.Assimilate();
}
}
catch (Autodesk.Revit.Exceptions.OperationCanceledException)
{
break;
}
}
}