public virtual void TestSeekBigFile()
        {
            Describe("Seek round a large file and verify the bytes are what is expected");
            Path testSeekFile = Path("bigseekfile.txt");

            byte[] block = ContractTestUtils.Dataset(65536, 0, 255);
            ContractTestUtils.CreateFile(GetFileSystem(), testSeekFile, false, block);
            instream = GetFileSystem().Open(testSeekFile);
            Assert.Equal(0, instream.GetPos());
            //expect that seek to 0 works
            instream.Seek(0);
            int result = instream.Read();

            Assert.Equal(0, result);
            Assert.Equal(1, instream.Read());
            Assert.Equal(2, instream.Read());
            //do seek 32KB ahead
            instream.Seek(32768);
            Assert.Equal("@32768", block[32768], unchecked ((byte)instream.
                                                            Read()));
            instream.Seek(40000);
            Assert.Equal("@40000", block[40000], unchecked ((byte)instream.
                                                            Read()));
            instream.Seek(8191);
            Assert.Equal("@8191", block[8191], unchecked ((byte)instream.Read
                                                              ()));
            instream.Seek(0);
            Assert.Equal("@0", 0, unchecked ((byte)instream.Read()));
        }
Exemplo n.º 2
0
            /// <summary>Constructor</summary>
            /// <param name="fin">FS input stream.</param>
            /// <param name="fileLength">Length of the corresponding file</param>
            /// <exception cref="System.IO.IOException"/>
            public Reader(FSDataInputStream fin, long fileLength, Configuration conf)
            {
                this.@in  = fin;
                this.conf = conf;
                // move the cursor to the beginning of the tail, containing: offset to the
                // meta block index, version and magic
                fin.Seek(fileLength - BCFile.Magic.Size() - Utils.Version.Size() - long.Size / byte
                         .Size);
                long offsetIndexMeta = fin.ReadLong();

                version = new Utils.Version(fin);
                BCFile.Magic.ReadAndVerify(fin);
                if (!version.CompatibleWith(BCFile.ApiVersion))
                {
                    throw new RuntimeException("Incompatible BCFile fileBCFileVersion.");
                }
                // read meta index
                fin.Seek(offsetIndexMeta);
                metaIndex = new BCFile.MetaIndex(fin);
                // read data:BCFile.index, the data block index
                BCFile.Reader.BlockReader blockR = GetMetaBlock(BCFile.DataIndex.BlockName);
                try
                {
                    dataIndex = new BCFile.DataIndex(blockR);
                }
                finally
                {
                    blockR.Close();
                }
            }
Exemplo n.º 3
0
        /*
         * Read some data, skip a few bytes and read more. HADOOP-922.
         */
        /// <exception cref="System.IO.IOException"/>
        private void SmallReadSeek(FileSystem fileSys, Path name)
        {
            if (fileSys is ChecksumFileSystem)
            {
                fileSys = ((ChecksumFileSystem)fileSys).GetRawFileSystem();
            }
            // Make the buffer size small to trigger code for HADOOP-922
            FSDataInputStream stmRaw = fileSys.Open(name, 1);

            byte[] expected = new byte[Onemb];
            Random rand     = new Random(seed);

            rand.NextBytes(expected);
            // Issue a simple read first.
            byte[] actual = new byte[128];
            stmRaw.Seek(100000);
            stmRaw.Read(actual, 0, actual.Length);
            CheckAndEraseData(actual, 100000, expected, "First Small Read Test");
            // now do a small seek of 4 bytes, within the same block.
            int newpos1 = 100000 + 128 + 4;

            stmRaw.Seek(newpos1);
            stmRaw.Read(actual, 0, actual.Length);
            CheckAndEraseData(actual, newpos1, expected, "Small Seek Bug 1");
            // seek another 256 bytes this time
            int newpos2 = newpos1 + 256;

            stmRaw.Seek(newpos2);
            stmRaw.Read(actual, 0, actual.Length);
            CheckAndEraseData(actual, newpos2, expected, "Small Seek Bug 2");
            // all done
            stmRaw.Close();
        }
 public virtual void TestNegativeSeek()
 {
     instream = GetFileSystem().Open(smallSeekFile);
     Assert.Equal(0, instream.GetPos());
     try
     {
         instream.Seek(-1);
         long p = instream.GetPos();
         Log.Warn("Seek to -1 returned a position of " + p);
         int result = instream.Read();
         NUnit.Framework.Assert.Fail("expected an exception, got data " + result + " at a position of "
                                     + p);
     }
     catch (EOFException e)
     {
         //bad seek -expected
         HandleExpectedException(e);
     }
     catch (IOException e)
     {
         //bad seek -expected, but not as preferred as an EOFException
         HandleRelaxedException("a negative seek", "EOFException", e);
     }
     Assert.Equal(0, instream.GetPos());
 }
Exemplo n.º 5
0
        /// <exception cref="System.IO.IOException"/>
        private long DumpFromOffset(PathData item, long offset)
        {
            long fileSize = item.RefreshStatus().GetLen();

            if (offset > fileSize)
            {
                return(fileSize);
            }
            // treat a negative offset as relative to end of the file, floor of 0
            if (offset < 0)
            {
                offset = Math.Max(fileSize + offset, 0);
            }
            FSDataInputStream @in = item.fs.Open(item.path);

            try
            {
                @in.Seek(offset);
                // use conf so the system configured io block size is used
                IOUtils.CopyBytes(@in, System.Console.Out, GetConf(), false);
                offset = @in.GetPos();
            }
            finally
            {
                @in.Close();
            }
            return(offset);
        }
Exemplo n.º 6
0
        public virtual void TestReadClosedStream()
        {
            Path testFile         = new Path("/testfile+2");
            FSDataOutputStream os = hdfs.Create(testFile, true);

            os.WriteBytes("0123456789");
            os.Close();
            // ByteRangeInputStream delays opens until reads. Make sure it doesn't
            // open a closed stream that has never been opened
            FSDataInputStream @in = hftpFs.Open(testFile);

            @in.Close();
            CheckClosedStream(@in);
            CheckClosedStream(@in.GetWrappedStream());
            // force the stream to connect and then close it
            @in = hftpFs.Open(testFile);
            int ch = @in.Read();

            NUnit.Framework.Assert.AreEqual('0', ch);
            @in.Close();
            CheckClosedStream(@in);
            CheckClosedStream(@in.GetWrappedStream());
            // make sure seeking doesn't automagically reopen the stream
            @in.Seek(4);
            CheckClosedStream(@in);
            CheckClosedStream(@in.GetWrappedStream());
        }
Exemplo n.º 7
0
            /// <exception cref="System.IO.IOException"/>
            public CombineFileLineRecordReader(CombineFileSplit split, TaskAttemptContext context
                                               , int index)
            {
                //offset of the chunk;
                //end of the chunk;
                // current pos
                this.path        = split.GetPath(index);
                fs               = this.path.GetFileSystem(context.GetConfiguration());
                this.startOffset = split.GetOffset(index);
                this.end         = startOffset + split.GetLength(index);
                bool skipFirstLine = false;

                //open the file
                fileIn = fs.Open(path);
                if (startOffset != 0)
                {
                    skipFirstLine = true;
                    --startOffset;
                    fileIn.Seek(startOffset);
                }
                reader = new LineReader(fileIn);
                if (skipFirstLine)
                {
                    // skip first line and re-establish "startOffset".
                    startOffset += reader.ReadLine(new Text(), 0, (int)Math.Min((long)int.MaxValue, end
                                                                                - startOffset));
                }
                this.pos = startOffset;
            }
Exemplo n.º 8
0
        /// <exception cref="System.IO.IOException"/>
        public override int Read(byte[] b, int off, int len)
        {
            if ((off | len | (off + len) | (b.Length - (off + len))) < 0)
            {
                throw new IndexOutOfRangeException();
            }
            int n = (int)Math.Min(int.MaxValue, Math.Min(len, (end - pos)));

            if (n == 0)
            {
                return(-1);
            }
            int ret = 0;

            lock (@in)
            {
                @in.Seek(pos);
                ret = @in.Read(b, off, n);
            }
            if (ret < 0)
            {
                end = pos;
                return(-1);
            }
            pos += ret;
            return(ret);
        }
Exemplo n.º 9
0
        /// <summary>test seek</summary>
        /// <exception cref="System.IO.IOException"/>
        internal static void VerifySeek(FileSystem fs, Path p, long offset, long length,
                                        byte[] buf, byte[] expected)
        {
            long remaining = length - offset;
            long @checked  = 0;

            Log.Info("XXX SEEK: offset=" + offset + ", remaining=" + remaining);
            TestWebHDFS.Ticker t = new TestWebHDFS.Ticker("SEEK", "offset=%d, remaining=%d",
                                                          offset, remaining);
            FSDataInputStream @in = fs.Open(p, 64 << 10);

            @in.Seek(offset);
            for (; remaining > 0;)
            {
                t.Tick(@checked, "offset=%d, remaining=%d", offset, remaining);
                int n = (int)Math.Min(remaining, buf.Length);
                @in.ReadFully(buf, 0, n);
                CheckData(offset, remaining, n, buf, expected);
                offset    += n;
                remaining -= n;
                @checked  += n;
            }
            @in.Close();
            t.End(@checked);
        }
Exemplo n.º 10
0
        /// <exception cref="System.Exception"/>
        private void ReadTestFile(string testFileName)
        {
            Path filePath             = new Path(testFileName);
            FSDataInputStream istream = dfs.Open(filePath, 10240);
            ByteBuffer        buf     = ByteBuffer.Allocate(10240);
            int count = 0;

            try
            {
                while (istream.Read(buf) > 0)
                {
                    count += 1;
                    buf.Clear();
                    istream.Seek(istream.GetPos() + 5);
                }
            }
            catch (IOException)
            {
            }
            finally
            {
                // Ignore this it's probably a seek after eof.
                istream.Close();
            }
        }
Exemplo n.º 11
0
 /// <summary>
 /// Verify that the read at a specific offset in a stream
 /// matches that expected
 /// </summary>
 /// <param name="stm">stream</param>
 /// <param name="fileContents">original file contents</param>
 /// <param name="seekOff">seek offset</param>
 /// <param name="toRead">number of bytes to read</param>
 /// <exception cref="System.IO.IOException">IO problems</exception>
 public static void VerifyRead(FSDataInputStream stm, byte[] fileContents, int seekOff
                               , int toRead)
 {
     byte[] @out = new byte[toRead];
     stm.Seek(seekOff);
     stm.ReadFully(@out);
     byte[] expected = Arrays.CopyOfRange(fileContents, seekOff, seekOff + toRead);
     CompareByteArrays(expected, @out, toRead);
 }
Exemplo n.º 12
0
        /// <exception cref="System.IO.IOException"/>
        public virtual void TestSeek()
        {
            Path dir = new Path("/test/testSeek");

            NUnit.Framework.Assert.IsTrue(fs.Mkdirs(dir));
            {
                //test zero file size
                Path zero = new Path(dir, "zero");
                fs.Create(zero).Close();
                int count             = 0;
                FSDataInputStream @in = fs.Open(zero);
                for (; @in.Read() != -1; count++)
                {
                }
                @in.Close();
                NUnit.Framework.Assert.AreEqual(0, count);
            }
            byte[] mydata = new byte[1 << 20];
            new Random().NextBytes(mydata);
            Path p = new Path(dir, "file");
            FSDataOutputStream @out = fs.Create(p, false, 4096, (short)3, 1L << 17);

            @out.Write(mydata, 0, mydata.Length);
            @out.Close();
            int one_third = mydata.Length / 3;
            int two_third = one_third * 2;
            {
                //test seek
                int               offset = one_third;
                int               len    = mydata.Length - offset;
                byte[]            buf    = new byte[len];
                FSDataInputStream @in    = fs.Open(p);
                @in.Seek(offset);
                //read all remaining data
                @in.ReadFully(buf);
                @in.Close();
                for (int i = 0; i < buf.Length; i++)
                {
                    NUnit.Framework.Assert.AreEqual("Position " + i + ", offset=" + offset + ", length="
                                                    + len, mydata[i + offset], buf[i]);
                }
            }
            {
                //test position read (read the data after the two_third location)
                int               offset = two_third;
                int               len    = mydata.Length - offset;
                byte[]            buf    = new byte[len];
                FSDataInputStream @in    = fs.Open(p);
                @in.ReadFully(offset, buf);
                @in.Close();
                for (int i = 0; i < buf.Length; i++)
                {
                    NUnit.Framework.Assert.AreEqual("Position " + i + ", offset=" + offset + ", length="
                                                    + len, mydata[i + offset], buf[i]);
                }
            }
        }
Exemplo n.º 13
0
 /// <exception cref="System.IO.IOException"/>
 private void ReadAndCompare(FSDataInputStream @in, int position, int len)
 {
     byte[] b = new byte[len];
     @in.Seek(position);
     IOUtils.ReadFully(@in, b, 0, b.Length);
     for (int i = 0; i < b.Length; i++)
     {
         NUnit.Framework.Assert.AreEqual(expected[position + i], b[i]);
     }
 }
Exemplo n.º 14
0
        public virtual void TestSeekFile()
        {
            Describe("basic seek operations");
            instream = GetFileSystem().Open(smallSeekFile);
            Assert.Equal(0, instream.GetPos());
            //expect that seek to 0 works
            instream.Seek(0);
            int result = instream.Read();

            Assert.Equal(0, result);
            Assert.Equal(1, instream.Read());
            Assert.Equal(2, instream.GetPos());
            Assert.Equal(2, instream.Read());
            Assert.Equal(3, instream.GetPos());
            instream.Seek(128);
            Assert.Equal(128, instream.GetPos());
            Assert.Equal(128, instream.Read());
            instream.Seek(63);
            Assert.Equal(63, instream.Read());
        }
Exemplo n.º 15
0
 public virtual void TestSeekAndReadPastEndOfFile()
 {
     Describe("verify that reading past the last bytes in the file returns -1");
     instream = GetFileSystem().Open(smallSeekFile);
     Assert.Equal(0, instream.GetPos());
     //expect that seek to 0 works
     //go just before the end
     instream.Seek(TestFileLen - 2);
     Assert.True("Premature EOF", instream.Read() != -1);
     Assert.True("Premature EOF", instream.Read() != -1);
     AssertMinusOne("read past end of file", instream.Read());
 }
Exemplo n.º 16
0
        /// <exception cref="System.IO.IOException"/>
        public override void Initialize(InputSplit genericSplit, TaskAttemptContext context
                                        )
        {
            FileSplit     split = (FileSplit)genericSplit;
            Configuration job   = context.GetConfiguration();

            this.maxLineLength = job.GetInt(MaxLineLength, int.MaxValue);
            start = split.GetStart();
            end   = start + split.GetLength();
            Path file = split.GetPath();
            // open the file and seek to the start of the split
            FileSystem fs = file.GetFileSystem(job);

            fileIn = fs.Open(file);
            CompressionCodec codec = new CompressionCodecFactory(job).GetCodec(file);

            if (null != codec)
            {
                isCompressedInput = true;
                decompressor      = CodecPool.GetDecompressor(codec);
                if (codec is SplittableCompressionCodec)
                {
                    SplitCompressionInputStream cIn = ((SplittableCompressionCodec)codec).CreateInputStream
                                                          (fileIn, decompressor, start, end, SplittableCompressionCodec.READ_MODE.Byblock);
                    @in          = new CompressedSplitLineReader(cIn, job, this.recordDelimiterBytes);
                    start        = cIn.GetAdjustedStart();
                    end          = cIn.GetAdjustedEnd();
                    filePosition = cIn;
                }
                else
                {
                    @in = new SplitLineReader(codec.CreateInputStream(fileIn, decompressor), job, this
                                              .recordDelimiterBytes);
                    filePosition = fileIn;
                }
            }
            else
            {
                fileIn.Seek(start);
                @in = new UncompressedSplitLineReader(fileIn, job, this.recordDelimiterBytes, split
                                                      .GetLength());
                filePosition = fileIn;
            }
            // If this is not the first split, we always throw away first record
            // because we always (except the last split) read one extra line in
            // next() method.
            if (start != 0)
            {
                start += @in.ReadLine(new Text(), 0, MaxBytesToConsume(start));
            }
            this.pos = start;
        }
Exemplo n.º 17
0
        /// <summary>
        /// Retrieve the map output of a single map task
        /// and send it to the merger.
        /// </summary>
        /// <exception cref="System.IO.IOException"/>
        private bool CopyMapOutput(TaskAttemptID mapTaskId)
        {
            // Figure out where the map task stored its output.
            Path mapOutputFileName = localMapFiles[mapTaskId].GetOutputFile();
            Path indexFileName     = mapOutputFileName.Suffix(".index");
            // Read its index to determine the location of our split
            // and its size.
            SpillRecord sr = new SpillRecord(indexFileName, job);
            IndexRecord ir = sr.GetIndex(reduce);
            long        compressedLength   = ir.partLength;
            long        decompressedLength = ir.rawLength;

            compressedLength   -= CryptoUtils.CryptoPadding(job);
            decompressedLength -= CryptoUtils.CryptoPadding(job);
            // Get the location for the map output - either in-memory or on-disk
            MapOutput <K, V> mapOutput = merger.Reserve(mapTaskId, decompressedLength, id);

            // Check if we can shuffle *now* ...
            if (mapOutput == null)
            {
                Log.Info("fetcher#" + id + " - MergeManager returned Status.WAIT ...");
                return(false);
            }
            // Go!
            Log.Info("localfetcher#" + id + " about to shuffle output of map " + mapOutput.GetMapId
                         () + " decomp: " + decompressedLength + " len: " + compressedLength + " to " + mapOutput
                     .GetDescription());
            // now read the file, seek to the appropriate section, and send it.
            FileSystem        localFs  = FileSystem.GetLocal(job).GetRaw();
            FSDataInputStream inStream = localFs.Open(mapOutputFileName);

            inStream = CryptoUtils.WrapIfNecessary(job, inStream);
            try
            {
                inStream.Seek(ir.startOffset + CryptoUtils.CryptoPadding(job));
                mapOutput.Shuffle(Localhost, inStream, compressedLength, decompressedLength, metrics
                                  , reporter);
            }
            finally
            {
                try
                {
                    inStream.Close();
                }
                catch (IOException ioe)
                {
                    Log.Warn("IOException closing inputstream from map output: " + ioe.ToString());
                }
            }
            scheduler.CopySucceeded(mapTaskId, Localhost, compressedLength, 0, 0, mapOutput);
            return(true);
        }
Exemplo n.º 18
0
        public virtual void TestSeek()
        {
            Path testFile           = new Path("/testfile+1");
            FSDataOutputStream @out = hdfs.Create(testFile, true);

            @out.WriteBytes("0123456789");
            @out.Close();
            FSDataInputStream @in = hftpFs.Open(testFile);

            @in.Seek(7);
            NUnit.Framework.Assert.AreEqual('7', @in.Read());
            @in.Close();
        }
Exemplo n.º 19
0
        public virtual void TestSeekPastEndOfFileThenReseekAndRead()
        {
            Describe("do a seek past the EOF, then verify the stream recovers");
            instream = GetFileSystem().Open(smallSeekFile);
            //go just before the end. This may or may not fail; it may be delayed until the
            //read
            bool canSeekPastEOF = !GetContract().IsSupported(ContractOptions.RejectsSeekPastEof
                                                             , true);

            try
            {
                instream.Seek(TestFileLen + 1);
                //if this doesn't trigger, then read() is expected to fail
                AssertMinusOne("read after seeking past EOF", instream.Read());
            }
            catch (EOFException e)
            {
                //This is an error iff the FS claims to be able to seek past the EOF
                if (canSeekPastEOF)
                {
                    //a failure wasn't expected
                    throw;
                }
                HandleExpectedException(e);
            }
            catch (IOException e)
            {
                //This is an error iff the FS claims to be able to seek past the EOF
                if (canSeekPastEOF)
                {
                    //a failure wasn't expected
                    throw;
                }
                HandleRelaxedException("a seek past the end of the file", "EOFException", e);
            }
            //now go back and try to read from a valid point in the file
            instream.Seek(1);
            Assert.True("Premature EOF", instream.Read() != -1);
        }
Exemplo n.º 20
0
            /// <exception cref="System.IO.IOException"/>
            /// <exception cref="System.Exception"/>
            public override void Initialize(InputSplit split, TaskAttemptContext context)
            {
                Path       p  = ((FileSplit)split).GetPath();
                FileSystem fs = p.GetFileSystem(context.GetConfiguration());

                @in = fs.Open(p);
                long start = ((FileSplit)split).GetStart();

                // find the offset to start at a record boundary
                offset = (RecordLength - (start % RecordLength)) % RecordLength;
                @in.Seek(start + offset);
                length = ((FileSplit)split).GetLength();
            }
Exemplo n.º 21
0
            /// <exception cref="System.IO.IOException"/>
            protected internal override int ReadChunk(long pos, byte[] buf, int offset, int len
                                                      , byte[] checksum)
            {
                bool eof = false;

                if (NeedChecksum())
                {
                    System.Diagnostics.Debug.Assert(checksum != null);
                    // we have a checksum buffer
                    System.Diagnostics.Debug.Assert(checksum.Length % ChecksumSize == 0);
                    // it is sane length
                    System.Diagnostics.Debug.Assert(len >= bytesPerSum);
                    // we must read at least one chunk
                    int checksumsToRead = Math.Min(len / bytesPerSum, checksum.Length / ChecksumSize);
                    // number of checksums based on len to read
                    // size of checksum buffer
                    long checksumPos = GetChecksumFilePos(pos);
                    if (checksumPos != sums.GetPos())
                    {
                        sums.Seek(checksumPos);
                    }
                    int sumLenRead = sums.Read(checksum, 0, ChecksumSize * checksumsToRead);
                    if (sumLenRead >= 0 && sumLenRead % ChecksumSize != 0)
                    {
                        throw new ChecksumException("Checksum file not a length multiple of checksum size "
                                                    + "in " + file + " at " + pos + " checksumpos: " + checksumPos + " sumLenread: "
                                                    + sumLenRead, pos);
                    }
                    if (sumLenRead <= 0)
                    {
                        // we're at the end of the file
                        eof = true;
                    }
                    else
                    {
                        // Adjust amount of data to read based on how many checksum chunks we read
                        len = Math.Min(len, bytesPerSum * (sumLenRead / ChecksumSize));
                    }
                }
                if (pos != datas.GetPos())
                {
                    datas.Seek(pos);
                }
                int nread = ReadFully(datas, buf, offset, len);

                if (eof && nread > 0)
                {
                    throw new ChecksumException("Checksum error: " + file + " at " + pos, pos);
                }
                return(nread);
            }
Exemplo n.º 22
0
        /// <exception cref="System.IO.IOException"/>
        public LineRecordReader(Configuration job, FileSplit split, byte[] recordDelimiter
                                )
        {
            this.maxLineLength = job.GetInt(LineRecordReader.MaxLineLength, int.MaxValue);
            start = split.GetStart();
            end   = start + split.GetLength();
            Path file = split.GetPath();

            compressionCodecs = new CompressionCodecFactory(job);
            codec             = compressionCodecs.GetCodec(file);
            // open the file and seek to the start of the split
            FileSystem fs = file.GetFileSystem(job);

            fileIn = fs.Open(file);
            if (IsCompressedInput())
            {
                decompressor = CodecPool.GetDecompressor(codec);
                if (codec is SplittableCompressionCodec)
                {
                    SplitCompressionInputStream cIn = ((SplittableCompressionCodec)codec).CreateInputStream
                                                          (fileIn, decompressor, start, end, SplittableCompressionCodec.READ_MODE.Byblock);
                    @in          = new CompressedSplitLineReader(cIn, job, recordDelimiter);
                    start        = cIn.GetAdjustedStart();
                    end          = cIn.GetAdjustedEnd();
                    filePosition = cIn;
                }
                else
                {
                    // take pos from compressed stream
                    @in = new SplitLineReader(codec.CreateInputStream(fileIn, decompressor), job, recordDelimiter
                                              );
                    filePosition = fileIn;
                }
            }
            else
            {
                fileIn.Seek(start);
                @in = new UncompressedSplitLineReader(fileIn, job, recordDelimiter, split.GetLength
                                                          ());
                filePosition = fileIn;
            }
            // If this is not the first split, we always throw away first record
            // because we always (except the last split) read one extra line in
            // next() method.
            if (start != 0)
            {
                start += @in.ReadLine(new Text(), 0, MaxBytesToConsume(start));
            }
            this.pos = start;
        }
Exemplo n.º 23
0
        /// <exception cref="System.IO.IOException"/>
        private void TestEOF(MiniDFSCluster cluster, int fileLength)
        {
            FileSystem fs   = cluster.GetFileSystem();
            Path       path = new Path("testEOF." + fileLength);

            DFSTestUtil.CreateFile(fs, path, fileLength, (short)1, unchecked ((int)(0xBEEFBEEF
                                                                                    )));
            FSDataInputStream fis   = fs.Open(path);
            ByteBuffer        empty = ByteBuffer.Allocate(0);

            // A read into an empty bytebuffer at the beginning of the file gives 0.
            NUnit.Framework.Assert.AreEqual(0, fis.Read(empty));
            fis.Seek(fileLength);
            // A read into an empty bytebuffer at the end of the file gives -1.
            NUnit.Framework.Assert.AreEqual(-1, fis.Read(empty));
            if (fileLength > BlockSize)
            {
                fis.Seek(fileLength - BlockSize + 1);
                ByteBuffer dbb = ByteBuffer.AllocateDirect(BlockSize);
                NUnit.Framework.Assert.AreEqual(BlockSize - 1, fis.Read(dbb));
            }
            fis.Close();
        }
Exemplo n.º 24
0
        // This is also called from the old FixedLengthRecordReader API implementation
        /// <exception cref="System.IO.IOException"/>
        public virtual void Initialize(Configuration job, long splitStart, long splitLength
                                       , Path file)
        {
            start = splitStart;
            end   = start + splitLength;
            long partialRecordLength = start % recordLength;
            long numBytesToSkip      = 0;

            if (partialRecordLength != 0)
            {
                numBytesToSkip = recordLength - partialRecordLength;
            }
            // open the file and seek to the start of the split
            FileSystem fs = file.GetFileSystem(job);

            fileIn = fs.Open(file);
            CompressionCodec codec = new CompressionCodecFactory(job).GetCodec(file);

            if (null != codec)
            {
                isCompressedInput = true;
                decompressor      = CodecPool.GetDecompressor(codec);
                CompressionInputStream cIn = codec.CreateInputStream(fileIn, decompressor);
                filePosition = cIn;
                inputStream  = cIn;
                numRecordsRemainingInSplit = long.MaxValue;
                Log.Info("Compressed input; cannot compute number of records in the split");
            }
            else
            {
                fileIn.Seek(start);
                filePosition = fileIn;
                inputStream  = fileIn;
                long splitSize = end - start - numBytesToSkip;
                numRecordsRemainingInSplit = (splitSize + recordLength - 1) / recordLength;
                if (numRecordsRemainingInSplit < 0)
                {
                    numRecordsRemainingInSplit = 0;
                }
                Log.Info("Expecting " + numRecordsRemainingInSplit + " records each with a length of "
                         + recordLength + " bytes in the split with an effective size of " + splitSize +
                         " bytes");
            }
            if (numBytesToSkip != 0)
            {
                start += inputStream.Skip(numBytesToSkip);
            }
            this.pos = start;
        }
Exemplo n.º 25
0
 /// <exception cref="System.IO.IOException"/>
 internal virtual void Init(Counters.Counter readsCounter)
 {
     if (reader == null)
     {
         FSDataInputStream @in = fs.Open(file);
         @in.Seek(segmentOffset);
         @in    = CryptoUtils.WrapIfNecessary(conf, @in);
         reader = new IFile.Reader <K, V>(conf, @in, segmentLength - CryptoUtils.CryptoPadding
                                              (conf), codec, readsCounter);
     }
     if (mapOutputsCounter != null)
     {
         mapOutputsCounter.Increment(1);
     }
 }
Exemplo n.º 26
0
        /// <summary>
        /// Test (expected to throw IOE) for <code>FSDataInpuStream#seek</code>
        /// when the position argument is larger than the file size.
        /// </summary>
        /// <exception cref="System.IO.IOException"/>
        public virtual void TestSeekPastFileSize()
        {
            Configuration  conf    = new HdfsConfiguration();
            MiniDFSCluster cluster = new MiniDFSCluster.Builder(conf).Build();
            FileSystem     fs      = cluster.GetFileSystem();

            try
            {
                Path seekFile = new Path("seekboundaries.dat");
                DFSTestUtil.CreateFile(fs, seekFile, Onemb, fs.GetDefaultReplication(seekFile), seed
                                       );
                FSDataInputStream stream = fs.Open(seekFile);
                // Perform "safe seek" (expected to pass)
                stream.Seek(65536);
                NUnit.Framework.Assert.AreEqual(65536, stream.GetPos());
                // expect IOE for this call
                stream.Seek(Onemb + Onemb + Onemb);
            }
            finally
            {
                fs.Close();
                cluster.Shutdown();
            }
        }
Exemplo n.º 27
0
        public virtual void TestSeekZeroByteFile()
        {
            Describe("seek and read a 0 byte file");
            instream = GetFileSystem().Open(zeroByteFile);
            Assert.Equal(0, instream.GetPos());
            //expect initial read to fai;
            int result = instream.Read();

            AssertMinusOne("initial byte read", result);
            byte[] buffer = new byte[1];
            //expect that seek to 0 works
            instream.Seek(0);
            //reread, expect same exception
            result = instream.Read();
            AssertMinusOne("post-seek byte read", result);
            result = instream.Read(buffer, 0, 1);
            AssertMinusOne("post-seek buffer read", result);
        }
Exemplo n.º 28
0
        /// <exception cref="System.IO.IOException"/>
        public virtual void TestSkipWithVerifyChecksum()
        {
            int           size = blockSize;
            Configuration conf = new Configuration();

            conf.SetBoolean(DFSConfigKeys.DfsClientReadShortcircuitKey, true);
            conf.SetBoolean(DFSConfigKeys.DfsClientReadShortcircuitSkipChecksumKey, false);
            conf.Set(DFSConfigKeys.DfsDomainSocketPathKey, "/tmp/testSkipWithVerifyChecksum._PORT"
                     );
            DomainSocket.DisableBindPathValidation();
            MiniDFSCluster cluster = new MiniDFSCluster.Builder(conf).NumDataNodes(1).Format(
                true).Build();
            FileSystem fs = cluster.GetFileSystem();

            try
            {
                // check that / exists
                Path path = new Path("/");
                NUnit.Framework.Assert.IsTrue("/ should be a directory", fs.GetFileStatus(path).IsDirectory
                                                  () == true);
                byte[] fileData = AppendTestUtil.RandomBytes(seed, size * 3);
                // create a new file in home directory. Do not close it.
                Path file1             = new Path("filelocal.dat");
                FSDataOutputStream stm = CreateFile(fs, file1, 1);
                // write to file
                stm.Write(fileData);
                stm.Close();
                // now test the skip function
                FSDataInputStream instm  = fs.Open(file1);
                byte[]            actual = new byte[fileData.Length];
                // read something from the block first, otherwise BlockReaderLocal.skip()
                // will not be invoked
                int  nread   = instm.Read(actual, 0, 3);
                long skipped = 2 * size + 3;
                instm.Seek(skipped);
                nread = instm.Read(actual, (int)(skipped + nread), 3);
                instm.Close();
            }
            finally
            {
                fs.Close();
                cluster.Shutdown();
            }
        }
Exemplo n.º 29
0
        /// <exception cref="System.Exception"/>
        public virtual void TestSeekAfterSetDropBehind()
        {
            // start a cluster
            Log.Info("testSeekAfterSetDropBehind");
            Configuration  conf        = new HdfsConfiguration();
            MiniDFSCluster cluster     = null;
            string         TestPath    = "/test";
            int            TestPathLen = MaxTestFileLen;

            try
            {
                cluster = new MiniDFSCluster.Builder(conf).NumDataNodes(1).Build();
                cluster.WaitActive();
                FileSystem fs = cluster.GetFileSystem();
                CreateHdfsFile(fs, new Path(TestPath), TestPathLen, false);
                // verify that we can seek after setDropBehind
                FSDataInputStream fis = fs.Open(new Path(TestPath));
                try
                {
                    NUnit.Framework.Assert.IsTrue(fis.Read() != -1);
                    // create BlockReader
                    fis.SetDropBehind(false);
                    // clear BlockReader
                    fis.Seek(2);
                }
                finally
                {
                    // seek
                    fis.Close();
                }
            }
            finally
            {
                if (cluster != null)
                {
                    cluster.Shutdown();
                }
            }
        }
Exemplo n.º 30
0
        /// <exception cref="System.IO.IOException"/>
        private long TailFile(Path file, long startPos)
        {
            long numRead = 0;
            FSDataInputStream inputStream = fileSystem.Open(file);

            inputStream.Seek(startPos);
            int len = 4 * 1024;

            byte[] buf = new byte[len];
            int    read;

            while ((read = inputStream.Read(buf)) > -1)
            {
                Log.Info(string.Format("read %d bytes", read));
                if (!ValidateSequentialBytes(buf, (int)(startPos + numRead), read))
                {
                    Log.Error(string.Format("invalid bytes: [%s]\n", Arrays.ToString(buf)));
                    throw new ChecksumException(string.Format("unable to validate bytes"), startPos);
                }
                numRead += read;
            }
            inputStream.Close();
            return(numRead + startPos - 1);
        }