private async void Initialize()
{
// Apply initial display settings
UpdateDisplaySettings();
// Initialize the map with an oceans basemap
MyMapView.Map = new Map(Basemap.CreateOceans());
// Get the path to the ENC Exchange Set
string encPath = DataManager.GetDataFolder("9d2987a825c646468b3ce7512fb76e2d", "ExchangeSetwithoutUpdates", "ENC_ROOT",
"CATALOG.031");
// Create the Exchange Set
// Note: this constructor takes an array of paths because so that update sets can be loaded alongside base data
EncExchangeSet myEncExchangeSet = new EncExchangeSet(new string[] { encPath });
// Wait for the exchange set to load
await myEncExchangeSet.LoadAsync();
// Store a list of data set extent's - will be used to zoom the mapview to the full extent of the Exchange Set
List <Envelope> dataSetExtents = new List <Envelope>();
// Add each data set as a layer
foreach (EncDataset myEncDataSet in myEncExchangeSet.Datasets)
{
// Create the cell and layer
EncLayer myEncLayer = new EncLayer(new EncCell(myEncDataSet));
// Add the layer to the map
MyMapView.Map.OperationalLayers.Add(myEncLayer);
// Wait for the layer to load
await myEncLayer.LoadAsync();
// Add the extent to the list of extents
dataSetExtents.Add(myEncLayer.FullExtent);
}
// Use the geometry engine to compute the full extent of the ENC Exchange Set
Envelope fullExtent = GeometryEngine.CombineExtents(dataSetExtents);
// Set the viewpoint
MyMapView.SetViewpoint(new Viewpoint(fullExtent));
// Subscribe to notifications about leaving so that settings can be re-set
this.Unloaded += SampleUnloaded;
// Enable the setting change UI.
DayRadioButton.Checked += Setting_Checked;
DuskRadioButton.Checked += Setting_Checked;
NightRadioButton.Checked += Setting_Checked;
PaperPointRadioButton.Checked += Setting_Checked;
SymbolizedAreaRadioButton.Checked += Setting_Checked;
PlainAreaRadioButton.Checked += Setting_Checked;
SimplifiedRadioButton.Checked += Setting_Checked;
}
private async void Initialize()
{
// Subscribe to event notifications.
_colorSchemeSegment.ValueChanged += ColorSchemeChanged;
_areaSegment.ValueChanged += AreaStyleChanged;
_pointSegment.ValueChanged += PointStyleChanged;
// Initialize the map with an oceans basemap.
_myMapView.Map = new Map(Basemap.CreateOceans());
// Get the path to the ENC Exchange Set.
string encPath = DataManager.GetDataFolder("9d2987a825c646468b3ce7512fb76e2d", "ExchangeSetwithoutUpdates", "ENC_ROOT", "CATALOG.031");
// Create the Exchange Set.
// Note: this constructor takes an array of paths because so that update sets can be loaded alongside base data.
EncExchangeSet encExchangeSet = new EncExchangeSet(encPath);
try
{
// Wait for the layer to load.
await encExchangeSet.LoadAsync();
// Store a list of data set extent's - will be used to zoom the mapview to the full extent of the Exchange Set.
List <Envelope> dataSetExtents = new List <Envelope>();
// Add each data set as a layer.
foreach (EncDataset encDataSet in encExchangeSet.Datasets)
{
EncLayer encLayer = new EncLayer(new EncCell(encDataSet));
// Add the layer to the map.
_myMapView.Map.OperationalLayers.Add(encLayer);
// Wait for the layer to load.
await encLayer.LoadAsync();
// Add the extent to the list of extents.
dataSetExtents.Add(encLayer.FullExtent);
}
// Use the geometry engine to compute the full extent of the ENC Exchange Set.
Envelope fullExtent = GeometryEngine.CombineExtents(dataSetExtents);
// Set the viewpoint.
_myMapView.SetViewpoint(new Viewpoint(fullExtent));
}
catch (Exception e)
{
new UIAlertView("Error", e.ToString(), (IUIAlertViewDelegate)null, "OK", null).Show();
}
}
private async void Initialize()
{
// Initialize the map with an oceans basemap.
MyMapView.Map = new Map(Basemap.CreateOceans());
// Get the path to the ENC Exchange Set.
string encPath = DataManager.GetDataFolder("9d2987a825c646468b3ce7512fb76e2d", "ExchangeSetwithoutUpdates", "ENC_ROOT", "CATALOG.031");
// Create the Exchange Set.
// Note: this constructor takes an array of paths because so that update sets can be loaded alongside base data.
EncExchangeSet myEncExchangeSet = new EncExchangeSet(encPath);
try
{
// Wait for the exchange set to load.
await myEncExchangeSet.LoadAsync();
// Store a list of data set extent's - will be used to zoom the mapview to the full extent of the Exchange Set.
List <Envelope> dataSetExtents = new List <Envelope>();
// Add each data set as a layer.
foreach (EncDataset myEncDataset in myEncExchangeSet.Datasets)
{
// Create the cell and layer.
EncLayer myEncLayer = new EncLayer(new EncCell(myEncDataset));
// Add the layer to the map.
MyMapView.Map.OperationalLayers.Add(myEncLayer);
// Wait for the layer to load.
await myEncLayer.LoadAsync();
// Add the extent to the list of extents.
dataSetExtents.Add(myEncLayer.FullExtent);
Console.WriteLine("Loop 1");
}
// Use the geometry engine to compute the full extent of the ENC Exchange Set.
Envelope fullExtent = GeometryEngine.CombineExtents(dataSetExtents);
// Set the viewpoint.
MyMapView.SetViewpoint(new Viewpoint(fullExtent));
// Subscribe to tap events (in order to use them to identify and select features).
MyMapView.GeoViewTapped += MyMapView_GeoViewTapped;
}
catch (Exception e)
{
MessageBox.Show(e.ToString(), "Error");
}
}
private async void Initialize()
{
// Initialize the map with an oceans basemap
MyMapView.Map = new Map(BasemapStyle.ArcGISOceans);
// Get the path to the ENC Exchange Set
string encPath = DataManager.GetDataFolder("9d2987a825c646468b3ce7512fb76e2d", "ExchangeSetwithoutUpdates", "ENC_ROOT",
"CATALOG.031");
// Create the Exchange Set
// Note: this constructor takes an array of paths because so that update sets can be loaded alongside base data
EncExchangeSet myEncExchangeSet = new EncExchangeSet(encPath);
try
{
// Wait for the exchange set to load
await myEncExchangeSet.LoadAsync();
// Store a list of data set extent's - will be used to zoom the mapview to the full extent of the Exchange Set
List <Envelope> dataSetExtents = new List <Envelope>();
// Add each data set as a layer
foreach (EncDataset myEncDataSet in myEncExchangeSet.Datasets)
{
EncLayer myEncLayer = new EncLayer(new EncCell(myEncDataSet));
// Add the layer to the map
MyMapView.Map.OperationalLayers.Add(myEncLayer);
// Wait for the layer to load
await myEncLayer.LoadAsync();
// Add the extent to the list of extents
dataSetExtents.Add(myEncLayer.FullExtent);
}
// Use the geometry engine to compute the full extent of the ENC Exchange Set
Envelope fullExtent = GeometryEngine.CombineExtents(dataSetExtents);
// Set the viewpoint
await MyMapView.SetViewpointAsync(new Viewpoint(fullExtent));
}
catch (Exception e)
{
await Application.Current.MainPage.DisplayAlert("Error", e.ToString(), "OK");
}
}
private async void Initialize()
{
// Initialize the map with an oceans basemap.
_myMapView.Map = new Map(Basemap.CreateOceans());
// Get the path to the ENC Exchange Set.
string encPath = DataManager.GetDataFolder("9d2987a825c646468b3ce7512fb76e2d", "ExchangeSetwithoutUpdates", "ENC_ROOT", "CATALOG.031");
// Create the Exchange Set.
// Note: this constructor takes an array of paths because so that update sets can be loaded alongside base data.
EncExchangeSet encExchangeSet = new EncExchangeSet(encPath);
// Wait for the layer to load.
await encExchangeSet.LoadAsync();
// Store a list of data set extent's - will be used to zoom the mapview to the full extent of the Exchange Set.
List <Envelope> dataSetExtents = new List <Envelope>();
// Add each data set as a layer.
foreach (EncDataset encDataSet in encExchangeSet.Datasets)
{
EncLayer encLayer = new EncLayer(new EncCell(encDataSet));
// Add the layer to the map.
_myMapView.Map.OperationalLayers.Add(encLayer);
// Wait for the layer to load.
await encLayer.LoadAsync();
// Add the extent to the list of extents.
dataSetExtents.Add(encLayer.FullExtent);
}
// Use the geometry engine to compute the full extent of the ENC Exchange Set.
Envelope fullExtent = GeometryEngine.CombineExtents(dataSetExtents);
// Set the viewpoint.
_myMapView.SetViewpoint(new Viewpoint(fullExtent));
}
private async void Initialize()
{
// Add display options to UI
ColorSchemePicker.ItemsSource = new List <String>()
{
"Day", "Dusk", "Night"
};
AreaPicker.ItemsSource = new List <String>()
{
"Plain", "Symbolized"
};
PointPicker.ItemsSource = new List <String>()
{
"Paper Chart", "Simplified"
};
// Provide initial selection
ColorSchemePicker.SelectedIndex = 0; AreaPicker.SelectedIndex = 0; PointPicker.SelectedIndex = 0;
// Apply initial display settings
UpdateDisplaySettings();
// Initialize the map with an oceans basemap
MyMapView.Map = new Map(BasemapStyle.ArcGISOceans);
// Get the path to the ENC Exchange Set
string encPath = DataManager.GetDataFolder("9d2987a825c646468b3ce7512fb76e2d", "ExchangeSetwithoutUpdates", "ENC_ROOT",
"CATALOG.031");
// Create the Exchange Set
// Note: this constructor takes an array of paths because so that update sets can be loaded alongside base data
EncExchangeSet myEncExchangeSet = new EncExchangeSet(new string[] { encPath });
try
{
// Wait for the exchange set to load
await myEncExchangeSet.LoadAsync();
// Store a list of data set extent's - will be used to zoom the mapview to the full extent of the Exchange Set
List <Envelope> dataSetExtents = new List <Envelope>();
// Add each data set as a layer
foreach (EncDataset myEncDataSet in myEncExchangeSet.Datasets)
{
EncLayer myEncLayer = new EncLayer(new EncCell(myEncDataSet));
// Add the layer to the map
MyMapView.Map.OperationalLayers.Add(myEncLayer);
// Wait for the layer to load
await myEncLayer.LoadAsync();
// Add the extent to the list of extents
dataSetExtents.Add(myEncLayer.FullExtent);
}
// Use the geometry engine to compute the full extent of the ENC Exchange Set
Envelope fullExtent = GeometryEngine.CombineExtents(dataSetExtents);
// Set the viewpoint
await MyMapView.SetViewpointAsync(new Viewpoint(fullExtent));
// Subscribe to notifications about leaving so that settings can be reset.
// This looks different because of sample viewer plumbing.
// Replace `((ArcGISRuntime.SamplePage)this.Parent)` with `this` in your app.
((Page)this.Parent).Disappearing += SampleUnloaded;
}
catch (Exception e)
{
await Application.Current.MainPage.DisplayAlert("Error", e.ToString(), "OK");
}
}
