void Initialize()
{
double dummy = 0.0f;
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
var nf = flowsheet.FlowsheetOptions.NumberFormat;
if (section.TipoSegmento == "Tubulaosimples")
{
section.TipoSegmento = "Straight Tube Section";
}
var lblseg = container.CreateAndAddTwoLabelsRow("Segment", section.Indice.ToString());
container.CreateAndAddDropDownRow("Type", sectypes, Array.IndexOf(sectypes.ToArray(), section.TipoSegmento), (sender, e) => section.TipoSegmento = sectypes[sender.SelectedIndex]);
container.CreateAndAddDropDownRow("Material", materials, Array.IndexOf(materials.ToArray(), section.Material), (sender, e) => section.Material = materials[sender.SelectedIndex]);
container.CreateAndAddTextBoxRow("N0", "Increments", section.Incrementos, (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.Incrementos = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow("N0", "Quantity", section.Quantidade, (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.Quantidade = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow(nf, "Length" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Comprimento), (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.Comprimento = cv.ConvertToSI(su.distance, double.Parse(sender.Text.ToString()));
}
});
container.CreateAndAddTextBoxRow(nf, "Elevation" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Elevacao), (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.Elevacao = cv.ConvertToSI(su.distance, double.Parse(sender.Text.ToString()));
}
});
container.CreateAndAddTextBoxRow(nf, "External Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DE), (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.DE = cv.Convert(su.diameter, "in", double.Parse(sender.Text.ToString()));
}
});
container.CreateAndAddTextBoxRow(nf, "Internal Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DI), (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.DI = cv.Convert(su.diameter, "in", double.Parse(sender.Text.ToString()));
}
});
}
void Initialize()
{
var su = SimObject.GetFlowsheet().FlowsheetOptions.SelectedUnitSystem;
var nf = SimObject.GetFlowsheet().FlowsheetOptions.NumberFormat;
var nff = SimObject.GetFlowsheet().FlowsheetOptions.FractionNumberFormat;
s.CreateAndAddLabelRow(container, "Dynamic Properties Editor");
s.CreateAndAddDescriptionRow(container, "Property values are updated/stored as they are changed/edited. There's no need to press ENTER to commit the changes.");
switch (SimObject.GraphicObject.ObjectType)
{
case ObjectType.MaterialStream:
container.CreateAndAddDropDownRow("Dynamic Specification",
SimObject.DynamicsSpec.GetEnumNames(), (int)SimObject.DynamicsSpec, (dd, e) => {
SimObject.DynamicsSpec = dd.SelectedIndex.ToEnum <Interfaces.Enums.Dynamics.DynamicsSpecType>();
SimObject.GetFlowsheet().UpdateInterface();
});
break;
}
var col1 = (IDictionary <string, object>)SimObject.ExtraProperties;
var col2 = (IDictionary <string, object>)SimObject.ExtraPropertiesDescriptions;
var col3 = (IDictionary <string, object>)SimObject.ExtraPropertiesUnitTypes;
foreach (var p in col1)
{
if (col2.ContainsKey(p.Key) && col3.ContainsKey(p.Key))
{
string unitsstring = "";
try
{
var utype = col3[p.Key];
Interfaces.Enums.UnitOfMeasure eval = (Interfaces.Enums.UnitOfMeasure)System.Enum.ToObject(typeof(Interfaces.Enums.UnitOfMeasure), utype);
unitsstring = su.GetCurrentUnits(eval);
}
catch { }
container.CreateAndAddTextBoxRow("G", unitsstring != "" ? p.Key + " (" + unitsstring + ")" : p.Key,
p.Value.ToString().ToDoubleFromCurrent(),
(tb, e) => {
try
{
col1[p.Key] = tb.Text.ToDoubleFromCurrent();
tb.TextColor = Colors.Blue;
}
catch
{
tb.TextColor = Colors.Red;
}
});
container.CreateAndAddDescriptionRow(col2[p.Key].ToString());
container.CreateAndAddEmptySpace();
}
}
s.CreateAndAddEmptySpace(container);
s.CreateAndAddEmptySpace(container);
}
void Initialize()
{
container.CreateAndAddLabelRow("Reaction ID");
container.CreateAndAddStringEditorRow2("Name", "", rx.Name, (sender, e) => { rx.Name = sender.Text; });
container.CreateAndAddLabelRow("Compounds and Stoichiometry (Include / Name / Stoich. Coeff. / Direct Order Exponent / Reverse Order Exponent)");
var compcontainer = new DynamicLayout();
compcontainer.BackgroundColor = Colors.White;
Double val;
foreach (ICompoundConstantProperties comp in flowsheet.SelectedCompounds.Values)
{
var chk = new CheckBox()
{
Text = comp.Name, Checked = (rx.Components.ContainsKey(comp.Name) ? true : false)
};
chk.CheckedChanged += (sender, e) =>
{
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, 0, 0));
}
else
{
rx.Components.Remove(comp.Name);
}
UpdateEquation();
};
var sc = new TextBox()
{
Width = 30, Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].StoichCoeff.ToString() : 0.0f.ToString())
};
sc.TextChanged += (sender, e) =>
{
if (Double.TryParse(sc.Text.ToString(), out val))
{
sc.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, Double.Parse(sc.Text), false, 0, 0));
}
else
{
rx.Components[comp.Name].StoichCoeff = double.Parse(sc.Text);
}
UpdateEquation();
}
else
{
sc.TextColor = Colors.Red;
}
};
var txtdo = new TextBox()
{
Width = 30, Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].DirectOrder.ToString() : 0.0f.ToString())
};
txtdo.TextChanged += (sender, e) =>
{
if (Double.TryParse(txtdo.Text.ToString(), out val))
{
txtdo.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, Double.Parse(txtdo.Text), 0));
}
else
{
rx.Components[comp.Name].DirectOrder = double.Parse(txtdo.Text);
}
UpdateEquation();
}
else
{
txtdo.TextColor = Colors.Red;
}
};
var txtro = new TextBox()
{
Width = 30, Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].ReverseOrder.ToString() : 0.0f.ToString())
};
txtro.TextChanged += (sender, e) =>
{
if (Double.TryParse(txtro.Text.ToString(), out val))
{
txtro.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, 0, Double.Parse(txtro.Text)));
}
else
{
rx.Components[comp.Name].ReverseOrder = double.Parse(txtro.Text);
}
UpdateEquation();
}
else
{
txtro.TextColor = Colors.Red;
}
};
compcontainer.Add(new TableRow(chk, null, sc, txtdo, txtro));
}
container.CreateAndAddControlRow(compcontainer);
container.CreateAndAddEmptySpace();
var comps = flowsheet.SelectedCompounds.Values.Select((x) => x.Name).ToList();
comps.Insert(0, "");
container.CreateAndAddLabelRow("Base Compound");
var basecompselector = container.CreateAndAddDropDownRow("Base Compound", comps, 0, null);
var basecomp = rx.Components.Values.Where((x) => x.IsBaseReactant).FirstOrDefault();
if (basecomp != null)
{
basecompselector.SelectedIndex = comps.IndexOf(basecomp.CompName);
}
else
{
basecompselector.SelectedIndex = 0;
}
basecompselector.SelectedIndexChanged += (sender, e) =>
{
if (rx.Components.ContainsKey(comps[basecompselector.SelectedIndex]))
{
foreach (var rxc in rx.Components.Values)
{
rxc.IsBaseReactant = false;
}
rx.Components[comps[basecompselector.SelectedIndex]].IsBaseReactant = true;
rx.BaseReactant = comps[basecompselector.SelectedIndex];
}
};
container.CreateAndAddLabelRow("Reaction Balance");
txtEquation = container.CreateAndAddLabelRow2("");
container.CreateAndAddLabelRow("Reaction Phase");
var rxphaseselector = container.CreateAndAddDropDownRow("Reaction Phase", Shared.StringArrays.reactionphase().ToList(), 0, null);
switch (rx.ReactionPhase)
{
case Interfaces.Enums.PhaseName.Vapor:
rxphaseselector.SelectedIndex = (0);
break;
case Interfaces.Enums.PhaseName.Liquid:
rxphaseselector.SelectedIndex = (1);
break;
case Interfaces.Enums.PhaseName.Mixture:
rxphaseselector.SelectedIndex = (2);
break;
}
rxphaseselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxphaseselector.SelectedIndex)
{
case 0:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Vapor;
break;
case 1:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Liquid;
break;
case 2:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Mixture;
break;
}
};
container.CreateAndAddLabelRow("Reaction Basis");
var rxbasisselector = container.CreateAndAddDropDownRow("Reaction Basis", Shared.StringArrays.reactionbasis().ToList(), 0, null);
switch (rx.ReactionBasis)
{
case Interfaces.Enums.ReactionBasis.Activity:
rxphaseselector.SelectedIndex = (0);
break;
case Interfaces.Enums.ReactionBasis.Fugacity:
rxphaseselector.SelectedIndex = (1);
break;
case Interfaces.Enums.ReactionBasis.MassConc:
rxphaseselector.SelectedIndex = (2);
break;
case Interfaces.Enums.ReactionBasis.MassFrac:
rxphaseselector.SelectedIndex = (3);
break;
case Interfaces.Enums.ReactionBasis.MolarConc:
rxphaseselector.SelectedIndex = (4);
break;
case Interfaces.Enums.ReactionBasis.MolarFrac:
rxphaseselector.SelectedIndex = (5);
break;
case Interfaces.Enums.ReactionBasis.PartialPress:
rxphaseselector.SelectedIndex = (6);
break;
}
rxbasisselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxbasisselector.SelectedIndex)
{
case 0:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.Activity;
break;
case 1:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.Fugacity;
break;
case 2:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MassConc;
break;
case 3:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MassFrac;
break;
case 4:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MolarConc;
break;
case 5:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MolarFrac;
break;
case 6:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.PartialPress;
break;
}
};
container.CreateAndAddLabelRow("Kinetic Parameters");
container.CreateAndAddLabelRow2("Direct and Reverse Reactions Velocity Constants (k = A*exp(-E/RT), E in J/mol and T in K)");
container.CreateAndAddStringEditorRow2("Direct Reaction A", "", rx.A_Forward.ToString(), (sender, e) => {
if (Double.TryParse(sender.Text.ToString(), out val))
{
sender.TextColor = SystemColors.ControlText;
rx.A_Forward = double.Parse(sender.Text);
}
else
{
sender.TextColor = Colors.Red;
}
});
container.CreateAndAddStringEditorRow2("Direct Reaction E", "", rx.E_Forward.ToString(), (sender, e) =>
{
if (Double.TryParse(sender.Text.ToString(), out val))
{
sender.TextColor = SystemColors.ControlText;
rx.E_Forward = double.Parse(sender.Text);
}
else
{
sender.TextColor = Colors.Red;
}
});
container.CreateAndAddStringEditorRow2("Reverse Reaction A", "", rx.A_Reverse.ToString(), (sender, e) =>
{
if (Double.TryParse(sender.Text.ToString(), out val))
{
sender.TextColor = SystemColors.ControlText;
rx.A_Reverse = double.Parse(sender.Text);
}
else
{
sender.TextColor = Colors.Red;
}
});
container.CreateAndAddStringEditorRow2("Reverse Reaction E", "", rx.E_Reverse.ToString(), (sender, e) =>
{
if (Double.TryParse(sender.Text.ToString(), out val))
{
sender.TextColor = SystemColors.ControlText;
rx.E_Reverse = double.Parse(sender.Text);
}
else
{
sender.TextColor = Colors.Red;
}
});
container.CreateAndAddLabelRow("Units");
var us = new DWSIM.SharedClasses.SystemsOfUnits.Units();
var units = us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.molar_conc);
units.AddRange(us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.mass_conc));
units.AddRange(us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.pressure));
units.Insert(0, "");
container.CreateAndAddDropDownRow("Basis Units (Base Compound)", units, units.IndexOf(rx.ConcUnit), (sender, e) => rx.ConcUnit = sender.SelectedValue.ToString());
container.CreateAndAddDropDownRow("Velocity Units", units, units.IndexOf(rx.VelUnit), (sender, e) => rx.VelUnit = sender.SelectedValue.ToString());
UpdateEquation();
}
void Initialize()
{
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
var nf = flowsheet.FlowsheetOptions.NumberFormat;
if (section.TipoSegmento == "Tubulaosimples")
{
section.TipoSegmento = "Straight Tube Section";
}
var lblseg = container.CreateAndAddTwoLabelsRow("Segment", section.Indice.ToString());
container.CreateAndAddDropDownRow("Type", sectypes, Array.IndexOf(sectypes.ToArray(), section.TipoSegmento), (sender, e) => section.TipoSegmento = sectypes[sender.SelectedIndex]);
var cbm = container.CreateAndAddDropDownRow("Material", materials, Array.IndexOf(materials.ToArray(), section.Material), (sender, e) => section.Material = materials[sender.SelectedIndex]);
var tbr = container.CreateAndAddTextBoxRow("G8", "Rugosity " + " (" + su.distance + ") *", cv.ConvertFromSI(su.distance, section.PipeWallRugosity), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.PipeWallRugosity = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
var tbtc = container.CreateAndAddStringEditorRow("Thermal Conductivity " + " (" + su.thermalConductivity + ") *", section.PipeWallThermalConductivityExpression, (sender, e) => { section.PipeWallThermalConductivityExpression = sender.Text.ToString(); });
container.CreateAndAddTextBoxRow("N0", "Increments", section.Incrementos, (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Incrementos = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow("N0", "Quantity", section.Quantidade, (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Quantidade = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow(nf, "Length" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Comprimento), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Comprimento = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddTextBoxRow(nf, "Elevation" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Elevacao), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Elevacao = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddTextBoxRow(nf, "External Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DE), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.DE = cv.Convert(su.diameter, "in", sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddTextBoxRow(nf, "Internal Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DI), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.DI = cv.Convert(su.diameter, "in", sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddDescriptionRow("* Fields required/used only for User-Defined materials");
tbr.ReadOnly = section.Material != flowsheet.GetTranslatedString("UserDefined");
tbtc.ReadOnly = tbr.ReadOnly;
if (tbr.ReadOnly)
{
tbr.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbtc.BackgroundColor = Eto.Drawing.Colors.LightGrey;
}
else
{
tbr.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbtc.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
}
cbm.SelectedValueChanged += (sender, e) =>
{
if (cbm.SelectedValue.ToString() == flowsheet.GetTranslatedString("UserDefined"))
{
tbr.ReadOnly = false;
tbtc.ReadOnly = false;
tbr.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbtc.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbr.Text = section.PipeWallRugosity.ConvertFromSI(su.distance).ToString(nf);
tbtc.Text = section.PipeWallThermalConductivityExpression;
tbtc.TextAlignment = TextAlignment.Left;
}
else
{
tbr.ReadOnly = true;
tbtc.ReadOnly = true;
tbr.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbtc.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbr.Text = pipe.rugosidade(cbm.SelectedValue.ToString(), section).ConvertFromSI(su.distance).ToString(nf);
if (pipe.GraphicObject.InputConnectors[0].IsAttached)
{
var stream = (MaterialStream)flowsheet.SimulationObjects[pipe.GraphicObject.InputConnectors[0].AttachedConnector.AttachedFrom.Name];
tbtc.Text = pipe.k_parede(cbm.SelectedValue.ToString(), stream.GetTemperature(), section).ConvertFromSI(su.thermalConductivity).ToString(nf);
}
else
{
tbtc.Text = pipe.k_parede(cbm.SelectedValue.ToString(), 298.15, section).ConvertFromSI(su.thermalConductivity).ToString(nf);
}
tbtc.TextAlignment = TextAlignment.Right;
}
};
}
void Initialize()
{
container.CreateAndAddLabelRow("Reaction ID");
container.CreateAndAddStringEditorRow2("Name", "", rx.Name, (sender, e) => { rx.Name = sender.Text; });
container.CreateAndAddLabelRow("Compounds and Stoichiometry (Include / Name / Stoich. Coeff.)");
var compcontainer = new DynamicLayout();
compcontainer.BackgroundColor = Colors.White;
Double val;
foreach (ICompoundConstantProperties comp in flowsheet.SelectedCompounds.Values)
{
var chk = new CheckBox()
{
Text = comp.Name, Checked = (rx.Components.ContainsKey(comp.Name) ? true : false)
};
chk.CheckedChanged += (sender, e) =>
{
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, 0, 0));
}
else
{
rx.Components.Remove(comp.Name);
}
UpdateEquation();
};
var sc = new TextBox()
{
Width = (int)(sf * 50), Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].StoichCoeff.ToString() : 0.0f.ToString())
};
sc.TextChanged += (sender, e) =>
{
if (Double.TryParse(sc.Text.ToString(), out val))
{
sc.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, Double.Parse(sc.Text), false, 0, 0));
}
else
{
rx.Components[comp.Name].StoichCoeff = double.Parse(sc.Text);
}
UpdateEquation();
}
else
{
sc.TextColor = Colors.Red;
}
};
compcontainer.Add(new TableRow(chk, null, sc));
}
container.CreateAndAddControlRow(compcontainer);
container.CreateAndAddEmptySpace();
var comps = flowsheet.SelectedCompounds.Values.Select((x) => x.Name).ToList();
comps.Insert(0, "");
container.CreateAndAddLabelRow("Base Compound");
var basecompselector = container.CreateAndAddDropDownRow("Base Compound", comps, 0, null);
var basecomp = rx.Components.Values.Where((x) => x.IsBaseReactant).FirstOrDefault();
if (basecomp != null)
{
basecompselector.SelectedIndex = comps.IndexOf(basecomp.CompName);
}
else
{
basecompselector.SelectedIndex = 0;
}
basecompselector.SelectedIndexChanged += (sender, e) =>
{
if (rx.Components.ContainsKey(comps[basecompselector.SelectedIndex]))
{
foreach (var rxc in rx.Components.Values)
{
rxc.IsBaseReactant = false;
}
rx.Components[comps[basecompselector.SelectedIndex]].IsBaseReactant = true;
rx.BaseReactant = comps[basecompselector.SelectedIndex];
}
};
container.CreateAndAddLabelRow("Reaction Balance");
txtEquation = container.CreateAndAddLabelRow2("");
container.CreateAndAddLabelRow("Reaction Phase");
var rxphaseselector = container.CreateAndAddDropDownRow("Reaction Phase", Shared.StringArrays.reactionphase().ToList(), 0, null);
switch (rx.ReactionPhase)
{
case Interfaces.Enums.PhaseName.Vapor:
rxphaseselector.SelectedIndex = (0);
break;
case Interfaces.Enums.PhaseName.Liquid:
rxphaseselector.SelectedIndex = (1);
break;
case Interfaces.Enums.PhaseName.Mixture:
rxphaseselector.SelectedIndex = (2);
break;
}
rxphaseselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxphaseselector.SelectedIndex)
{
case 0:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Vapor;
break;
case 1:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Liquid;
break;
case 2:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Mixture;
break;
}
};
UpdateEquation();
}
void Initialize()
{
container.CreateAndAddLabelRow("Reaction ID");
container.CreateAndAddStringEditorRow2("Name", "", rx.Name, (sender, e) => { rx.Name = sender.Text; });
container.CreateAndAddLabelRow("Compounds and Stoichiometry (Include / Name / Heat of Formation (kJ/kg) / Stoich. Coeff.)");
var compcontainer = new DynamicLayout();
//compcontainer.BackgroundColor = Colors.White;
Double val;
foreach (ICompoundConstantProperties comp in flowsheet.SelectedCompounds.Values)
{
var chk = new CheckBox()
{
Text = comp.Name, Checked = (rx.Components.ContainsKey(comp.Name) ? true : false)
};
chk.CheckedChanged += (sender, e) =>
{
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, 0, 0));
}
else
{
rx.Components.Remove(comp.Name);
}
UpdateEquation();
};
var sc = new TextBox()
{
Width = (int)(sf * 50), Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].StoichCoeff.ToString() : 0.0f.ToString())
};
sc.TextChanged += (sender, e) =>
{
if (Double.TryParse(sc.Text.ToString(), out val))
{
sc.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, Double.Parse(sc.Text), false, 0, 0));
}
else
{
rx.Components[comp.Name].StoichCoeff = double.Parse(sc.Text);
}
UpdateEquation();
}
else
{
sc.TextColor = Colors.Red;
}
};
var hf = new TextBox()
{
Enabled = false, Width = (int)(sf * 100), Text = comp.IG_Enthalpy_of_Formation_25C.ToString("N2")
};
compcontainer.Add(new TableRow(chk, null, hf, sc));
}
container.CreateAndAddControlRow(compcontainer);
container.CreateAndAddEmptySpace();
var comps = flowsheet.SelectedCompounds.Values.Select((x) => x.Name).ToList();
comps.Insert(0, "");
container.CreateAndAddLabelRow("Base Compound");
var basecompselector = container.CreateAndAddDropDownRow("Base Compound", comps, 0, null);
var basecomp = rx.Components.Values.Where((x) => x.IsBaseReactant).FirstOrDefault();
if (basecomp != null)
{
basecompselector.SelectedIndex = comps.IndexOf(basecomp.CompName);
}
else
{
basecompselector.SelectedIndex = 0;
}
basecompselector.SelectedIndexChanged += (sender, e) =>
{
if (rx.Components.ContainsKey(comps[basecompselector.SelectedIndex]))
{
foreach (var rxc in rx.Components.Values)
{
rxc.IsBaseReactant = false;
}
rx.Components[comps[basecompselector.SelectedIndex]].IsBaseReactant = true;
rx.BaseReactant = comps[basecompselector.SelectedIndex];
}
};
container.CreateAndAddLabelRow("Reaction Balance");
txtEquation = container.CreateAndAddLabelRow2("");
container.CreateAndAddLabelRow("Reaction Phase");
var rxphaseselector = container.CreateAndAddDropDownRow("Reaction Phase", Shared.StringArrays.reactionphase().ToList(), 0, null);
switch (rx.ReactionPhase)
{
case Interfaces.Enums.PhaseName.Mixture:
rxphaseselector.SelectedIndex = 0;
break;
case Interfaces.Enums.PhaseName.Vapor:
rxphaseselector.SelectedIndex = 1;
break;
case Interfaces.Enums.PhaseName.Liquid:
rxphaseselector.SelectedIndex = 2;
break;
}
rxphaseselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxphaseselector.SelectedIndex)
{
case 0:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Mixture;
break;
case 1:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Vapor;
break;
case 2:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Liquid;
break;
}
};
container.CreateAndAddLabelRow("Reaction Basis");
var rxbasisselector = container.CreateAndAddDropDownRow("Reaction Basis", Shared.StringArrays.reactionbasis().ToList(), 0, null);
switch (rx.ReactionBasis)
{
case Interfaces.Enums.ReactionBasis.Activity:
rxbasisselector.SelectedIndex = (0);
break;
case Interfaces.Enums.ReactionBasis.Fugacity:
rxbasisselector.SelectedIndex = (1);
break;
case Interfaces.Enums.ReactionBasis.MassConc:
rxbasisselector.SelectedIndex = (2);
break;
case Interfaces.Enums.ReactionBasis.MassFrac:
rxbasisselector.SelectedIndex = (3);
break;
case Interfaces.Enums.ReactionBasis.MolarConc:
rxbasisselector.SelectedIndex = (4);
break;
case Interfaces.Enums.ReactionBasis.MolarFrac:
rxbasisselector.SelectedIndex = (5);
break;
case Interfaces.Enums.ReactionBasis.PartialPress:
rxbasisselector.SelectedIndex = (6);
break;
}
rxbasisselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxbasisselector.SelectedIndex)
{
case 0:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.Activity;
break;
case 1:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.Fugacity;
break;
case 2:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MassConc;
break;
case 3:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MassFrac;
break;
case 4:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MolarConc;
break;
case 5:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MolarFrac;
break;
case 6:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.PartialPress;
break;
}
};
container.CreateAndAddLabelRow("Rate Expressions");
container.CreateAndAddLabelRow2("Reaction Rate Numerator Expression:");
container.CreateAndAddMultilineTextBoxRow(rx.RateEquationNumerator, false, false, (sender, e) => rx.RateEquationNumerator = sender.Text);
container.CreateAndAddLabelRow2("Reaction Rate Denominator Expression:");
container.CreateAndAddMultilineTextBoxRow(rx.RateEquationDenominator, false, false, (sender, e) => rx.RateEquationDenominator = sender.Text);
container.CreateAndAddDescriptionRow("Reaction Rate (r) = f(T, Ri, Pi) = Numerator / Denominator");
container.CreateAndAddDescriptionRow("Expression Variables: Temperature (T) in K, reactant amounts (R1, R2, ..., Rn) and product amounts (P1, P2, ..., Pn in the selected amount units, Reaction Rate (r) in the selected velocity units.");
container.CreateAndAddLabelRow("Units");
var us = new DWSIM.SharedClasses.SystemsOfUnits.Units();
var units = us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.molar_conc);
units.AddRange(us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.mass_conc));
units.AddRange(us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.pressure));
units.Insert(0, "");
container.CreateAndAddDropDownRow("Amount Units", units, units.IndexOf(rx.ConcUnit), (sender, e) => rx.ConcUnit = sender.SelectedValue.ToString());
var units2 = us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.reac_rate_heterog);
units2.Insert(0, "");
container.CreateAndAddDropDownRow("Velocity Units", units2, units2.IndexOf(rx.VelUnit), (sender, e) => rx.VelUnit = sender.SelectedValue.ToString());
UpdateEquation();
}
void Initialize()
{
container.CreateAndAddLabelRow("Reaction ID");
container.CreateAndAddStringEditorRow2("Name", "", rx.Name, (sender, e) => { rx.Name = sender.Text; });
container.CreateAndAddLabelRow("Compounds and Stoichiometry (Include / Name / Heat of Formation (kJ/kg) / Stoich. Coeff.)");
var compcontainer = new DynamicLayout();
//compcontainer.BackgroundColor = Colors.White;
Double val;
foreach (ICompoundConstantProperties comp in flowsheet.SelectedCompounds.Values)
{
var chk = new CheckBox()
{
Text = comp.Name, Checked = (rx.Components.ContainsKey(comp.Name) ? true : false)
};
chk.CheckedChanged += (sender, e) =>
{
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, 0, 0));
}
else
{
rx.Components.Remove(comp.Name);
}
UpdateEquation();
};
var sc = new TextBox()
{
Width = (int)(sf * 50), Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].StoichCoeff.ToString() : 0.0f.ToString())
};
sc.TextChanged += (sender, e) =>
{
if (Double.TryParse(sc.Text.ToString(), out val))
{
sc.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, Double.Parse(sc.Text), false, 0, 0));
}
else
{
rx.Components[comp.Name].StoichCoeff = double.Parse(sc.Text);
}
UpdateEquation();
}
else
{
sc.TextColor = Colors.Red;
}
};
var hf = new TextBox()
{
Enabled = false, Width = (int)(sf * 100), Text = comp.IG_Enthalpy_of_Formation_25C.ToString("N2")
};
compcontainer.Add(new TableRow(chk, null, hf, sc));
}
container.CreateAndAddControlRow(compcontainer);
container.CreateAndAddEmptySpace();
var comps = flowsheet.SelectedCompounds.Values.Select((x) => x.Name).ToList();
comps.Insert(0, "");
container.CreateAndAddLabelRow("Base Compound");
var basecompselector = container.CreateAndAddDropDownRow("Base Compound", comps, 0, null);
var basecomp = rx.Components.Values.Where((x) => x.IsBaseReactant).FirstOrDefault();
if (basecomp != null)
{
basecompselector.SelectedIndex = comps.IndexOf(basecomp.CompName);
}
else
{
basecompselector.SelectedIndex = 0;
}
basecompselector.SelectedIndexChanged += (sender, e) =>
{
if (rx.Components.ContainsKey(comps[basecompselector.SelectedIndex]))
{
foreach (var rxc in rx.Components.Values)
{
rxc.IsBaseReactant = false;
}
rx.Components[comps[basecompselector.SelectedIndex]].IsBaseReactant = true;
rx.BaseReactant = comps[basecompselector.SelectedIndex];
UpdateEquation();
}
};
container.CreateAndAddLabelRow("Reaction Balance");
txtEquation = container.CreateAndAddLabelRow2("");
container.CreateAndAddLabelRow("Temperature Limits");
var nf = flowsheet.FlowsheetOptions.NumberFormat;
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
container.CreateAndAddTextBoxRow(nf, "Minimum Temperature (" + su.temperature + ")", rx.Tmin.ConvertFromSI(su.temperature), (sender, e) => { if (sender.Text.IsValidDouble())
{
rx.Tmin = sender.Text.ToDoubleFromCurrent().ConvertToSI(su.temperature);
}
});
container.CreateAndAddTextBoxRow(nf, "Maximum Temperature (" + su.temperature + ")", rx.Tmax.ConvertFromSI(su.temperature), (sender, e) => { if (sender.Text.IsValidDouble())
{
rx.Tmax = sender.Text.ToDoubleFromCurrent().ConvertToSI(su.temperature);
}
});
container.CreateAndAddTextBoxRow(nf, "Approach (" + su.temperature + ")", rx.Approach.ConvertFromSI(su.temperature), (sender, e) => { if (sender.Text.IsValidDouble())
{
rx.Approach = sender.Text.ToDoubleFromCurrent().ConvertToSI(su.temperature);
}
});
container.CreateAndAddLabelRow("Reaction Basis");
var rxbasisselector = container.CreateAndAddDropDownRow("Reaction Basis", Shared.StringArrays.reactionbasis().ToList(), 0, null);
switch (rx.ReactionBasis)
{
case Interfaces.Enums.ReactionBasis.Activity:
rxbasisselector.SelectedIndex = (0);
break;
case Interfaces.Enums.ReactionBasis.Fugacity:
rxbasisselector.SelectedIndex = (1);
break;
case Interfaces.Enums.ReactionBasis.MassConc:
rxbasisselector.SelectedIndex = (2);
break;
case Interfaces.Enums.ReactionBasis.MassFrac:
rxbasisselector.SelectedIndex = (3);
break;
case Interfaces.Enums.ReactionBasis.MolarConc:
rxbasisselector.SelectedIndex = (4);
break;
case Interfaces.Enums.ReactionBasis.MolarFrac:
rxbasisselector.SelectedIndex = (5);
break;
case Interfaces.Enums.ReactionBasis.PartialPress:
rxbasisselector.SelectedIndex = (6);
break;
}
rxbasisselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxbasisselector.SelectedIndex)
{
case 0:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.Activity;
break;
case 1:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.Fugacity;
break;
case 2:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MassConc;
break;
case 3:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MassFrac;
break;
case 4:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MolarConc;
break;
case 5:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MolarFrac;
break;
case 6:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.PartialPress;
break;
}
};
container.CreateAndAddLabelRow("Reaction Phase");
var rxphaseselector = container.CreateAndAddDropDownRow("Reaction Phase", Shared.StringArrays.reactionphase().ToList(), 0, null);
switch (rx.ReactionPhase)
{
case Interfaces.Enums.PhaseName.Mixture:
rxphaseselector.SelectedIndex = (0);
break;
case Interfaces.Enums.PhaseName.Vapor:
rxphaseselector.SelectedIndex = (1);
break;
case Interfaces.Enums.PhaseName.Liquid:
rxphaseselector.SelectedIndex = (2);
break;
}
rxphaseselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxphaseselector.SelectedIndex)
{
case 0:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Mixture;
break;
case 1:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Vapor;
break;
case 2:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Liquid;
break;
}
};
UpdateEquation();
}
public void UpdatePropertiesLayout()
{
Application.Instance.Invoke(() =>
{
try
{
var pm = (PlotModel)Chart.PlotModel;
var pl = new DynamicLayout();
pl.Padding = new Eto.Drawing.Padding(10);
pl.CreateAndAddButtonRow("Update Chart Data", null, (btn, e) =>
{
Application.Instance.Invoke(() =>
{
UpdatePlotModelData();
UpdatePropertiesLayout();
});
});
pl.CreateAndAddLabelRow("General");
pl.CreateAndAddStringEditorRow("Chart Name", Chart.DisplayName, (t, e) =>
{
Chart.DisplayName = t.Text;
}, () => Application.Instance.Invoke(() => ((DocumentPage)Parent).Text = Chart.DisplayName));
pl.CreateAndAddDropDownRow("Data Source", Chart.ChartSource.GetEnumNames(), (int)Chart.ChartSource, (dd, e) =>
{
Chart.ChartSource = (ChartSource)dd.SelectedIndex;
UpdatePropertiesLayout();
});
if (Chart.ChartSource == ChartSource.FlowsheetObject)
{
pl.CreateAndAddLabelRow("Data Source");
var objlist = new List <String>();
objlist = Flowsheet.SimulationObjects.Values.Select((x) => x.GraphicObject.Tag).ToList();
objlist.Insert(0, "");
string selobj = "";
if (Flowsheet.SimulationObjects.ContainsKey(Chart.ChartSourceObjectID))
{
selobj = Flowsheet.SimulationObjects[Chart.ChartSourceObjectID].GraphicObject.Tag;
}
pl.CreateAndAddDropDownRow("Source Object", objlist, objlist.IndexOf(selobj), (dd, e) =>
{
var obj = Flowsheet.GetFlowsheetSimulationObject(dd.SelectedValue.ToString());
if (obj != null)
{
Chart.ChartSourceObjectID = obj.Name;
}
UpdatePropertiesLayout();
});
if (Flowsheet.SimulationObjects.ContainsKey(Chart.ChartSourceObjectID))
{
var obj = Flowsheet.GetFlowsheetSimulationObject(selobj);
var chartnames = obj.GetChartModelNames();
var cindex = 0;
if (Chart.ChartSourceObjectChartID != "")
{
if (chartnames.Contains(Chart.ChartSourceObjectChartID))
{
cindex = chartnames.IndexOf(Chart.ChartSourceObjectChartID);
}
}
pl.CreateAndAddDropDownRow("Source Object Chart Type", chartnames, cindex, (dd, e) =>
{
Chart.ChartSourceObjectChartID = chartnames[dd.SelectedIndex];
Application.Instance.Invoke(() =>
{
UpdatePlotModelData();
UpdatePropertiesLayout();
});
});
pl.CreateAndAddCheckBoxRow("Auto Update Chart from Object", Chart.ChartSourceObjectAutoUpdate,
(chk, e) => { Chart.ChartSourceObjectAutoUpdate = chk.Checked.GetValueOrDefault(); });
}
}
else
{
pl.CreateAndAddLabelRow2("X Axis Data Sources");
var ml1 = pl.CreateAndAddMultilineTextBoxRow(String.Join(Environment.NewLine, Chart.SpreadsheetDataSourcesX), false, true, (txt, e) =>
{
});
pl.CreateAndAddButtonRow("Update Data", null, (btn, e) =>
{
try
{
Chart.SpreadsheetDataSourcesX.Clear();
foreach (var line in ml1.Text.Split('\n'))
{
Chart.SpreadsheetDataSourcesX.Add(line.Trim());
}
Application.Instance.Invoke(() =>
{
UpdatePlotModelData();
});
}
catch (Exception ex)
{
MessageBox.Show("Error updating chart data: " + ex.Message, "DWSIM", MessageBoxType.Error);
}
});
pl.CreateAndAddLabelRow2("Y Axis Data Sources");
var ml2 = pl.CreateAndAddMultilineTextBoxRow(String.Join(Environment.NewLine, Chart.SpreadsheetDataSourcesY), false, true, (txt, e) =>
{
});
pl.CreateAndAddButtonRow("Update Data", null, (btn, e) =>
{
try
{
Chart.SpreadsheetDataSourcesY.Clear();
foreach (var line in ml2.Text.Split('\n'))
{
Chart.SpreadsheetDataSourcesY.Add(line.Trim());
}
Application.Instance.Invoke(() =>
{
UpdatePlotModelData();
});
}
catch (Exception ex)
{
MessageBox.Show("Error updating chart data: " + ex.Message, "DWSIM", MessageBoxType.Error);
}
});
}
if (pm != null)
{
pl.CreateAndAddLabelRow("Plot");
pl.CreateAndAddStringEditorRow("Title", pm.Title, (txt, e) =>
{
Application.Instance.Invoke(() =>
{
pm.Title = txt.Text;
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Title Position", pm.TitleHorizontalAlignment.GetEnumNames(),
(int)pm.TitleHorizontalAlignment, (dd, e) =>
{
pm.TitleHorizontalAlignment = dd.SelectedIndex.ToEnum <TitleHorizontalAlignment>();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Title Font Size", pm.TitleFontSize, 4.0, 30, 1, (ns, e) =>
{
pm.TitleFontSize = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddStringEditorRow("Subtitle", pm.Subtitle, (txt, e) =>
{
pm.Subtitle = txt.Text;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Subtitle Font Size", pm.SubtitleFontSize, 4.0, 30, 1, (ns, e) =>
{
pm.SubtitleFontSize = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddCheckBoxRow("Display Legend", pm.IsLegendVisible,
(chk, e) =>
{
pm.IsLegendVisible = chk.Checked.GetValueOrDefault();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
if (pm.IsLegendVisible)
{
pl.CreateAndAddDropDownRow("Legend Position", pm.LegendPosition.GetEnumNames(),
(int)pm.LegendPosition, (dd, e) =>
{
pm.LegendPosition = dd.SelectedIndex.ToEnum <LegendPosition>();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Legend Placement", pm.LegendPlacement.GetEnumNames(),
(int)pm.LegendPlacement, (dd, e) =>
{
pm.LegendPlacement = dd.SelectedIndex.ToEnum <LegendPlacement>();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Legend Orientation", pm.LegendOrientation.GetEnumNames(),
(int)pm.LegendOrientation, (dd, e) =>
{
pm.LegendOrientation = dd.SelectedIndex.ToEnum <LegendOrientation>();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddStringEditorRow("Legend Title", pm.LegendTitle, (txt, e) =>
{
pm.LegendTitle = txt.Text;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Legend Title Font Size", pm.LegendTitleFontSize, 4.0, 30, 1, (ns, e) =>
{
pm.LegendTitleFontSize = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Legend Item Alignment", pm.LegendItemAlignment.GetEnumNames(),
(int)pm.LegendItemAlignment, (dd, e) =>
{
pm.LegendItemAlignment = dd.SelectedIndex.ToEnum <OxyPlot.HorizontalAlignment>();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Legend Item Order", pm.LegendItemOrder.GetEnumNames(),
(int)pm.LegendItemOrder, (dd, e) =>
{
pm.LegendItemOrder = dd.SelectedIndex.ToEnum <OxyPlot.LegendItemOrder>();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Legend Item Spacing", pm.LegendItemSpacing, 0.1, 5, 1, (ns, e) =>
{
pm.LegendItemSpacing = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Legend Line Spacing", pm.LegendLineSpacing, 0.1, 5, 1, (ns, e) =>
{
pm.LegendLineSpacing = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
}
if (pm.Axes.Count >= 1)
{
pl.CreateAndAddLabelRow("X Axis");
pl.CreateAndAddStringEditorRow("Title", pm.Axes[0].Title, (txt, e) =>
{
pm.Axes[0].Title = txt.Text;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Font Size", pm.Axes[0].FontSize, 4.0, 30, 1, (ns, e) =>
{
pm.Axes[0].FontSize = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Title Font Size", pm.Axes[0].TitleFontSize, 4.0, 30, 1, (ns, e) =>
{
pm.Axes[0].TitleFontSize = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Title Position", pm.Axes[0].TitlePosition, 0.0, 1.0, 2, (ns, e) =>
{
pm.Axes[0].TitlePosition = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
}
if (pm.Axes.Count >= 2)
{
pl.CreateAndAddLabelRow("Y Axis");
pl.CreateAndAddStringEditorRow("Title", pm.Axes[1].Title, (txt, e) =>
{
pm.Axes[1].Title = txt.Text;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Font Size", pm.Axes[1].FontSize, 4.0, 30, 1, (ns, e) =>
{
pm.Axes[1].FontSize = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Title Font Size", pm.Axes[1].TitleFontSize, 4.0, 30, 1, (ns, e) =>
{
pm.Axes[1].TitleFontSize = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Title Position", pm.Axes[1].TitlePosition, 0.0, 1.0, 2, (ns, e) =>
{
pm.Axes[1].TitlePosition = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
}
}
var i = 0;
foreach (LineSeries series in pm.Series)
{
pl.CreateAndAddLabelRow(String.Format("Line Series #{0}", i));
pl.CreateAndAddStringEditorRow("Title", series.Title, (txt, e) =>
{
series.Title = txt.Text;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Line Type", series.LineStyle.GetEnumNames(),
(int)series.LineStyle, (dd, e) =>
{
series.LineStyle = dd.SelectedIndex.ToEnum <LineStyle>();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
var cchoices = new List <string>(ColorChoices);
cchoices.Insert(0, series.Color.ToString());
pl.CreateAndAddDropDownRow("Line Color", cchoices, 0, (dd, e) =>
{
if (dd.SelectedIndex > 0)
{
series.Color = (OxyColor)typeof(OxyColors).GetField(dd.SelectedValue.ToString()).GetValue(null);
}
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Line Width", series.StrokeThickness, 0.1, 10.0, 1, (ns, e) =>
{
series.StrokeThickness = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Marker Type", series.MarkerType.GetEnumNames(),
(int)series.MarkerType, (dd, e) =>
{
series.MarkerType = dd.SelectedIndex.ToEnum <MarkerType>();
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
cchoices = new List <string>(ColorChoices);
cchoices.Insert(0, series.Color.ToString());
pl.CreateAndAddNumericEditorRow("Marker Size", series.MarkerSize, 0.1, 10.0, 1, (ns, e) =>
{
series.MarkerSize = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Marker Fill Color", cchoices, 0, (dd, e) =>
{
if (dd.SelectedIndex > 0)
{
series.MarkerFill = (OxyColor)typeof(OxyColors).GetField(dd.SelectedValue.ToString()).GetValue(null);
}
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddNumericEditorRow("Marker Stroke Size", series.MarkerStrokeThickness, 0.1, 10.0, 1, (ns, e) =>
{
series.MarkerStrokeThickness = ns.Value;
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
pl.CreateAndAddDropDownRow("Marker Stroke Color", cchoices, 0, (dd, e) =>
{
if (dd.SelectedIndex > 0)
{
series.MarkerStroke = (OxyColor)typeof(OxyColors).GetField(dd.SelectedValue.ToString()).GetValue(null);
}
Application.Instance.Invoke(() =>
{
ChartView.Model.InvalidatePlot(true);
ChartView.Invalidate();
});
});
}
Splitter.Panel2 = new Scrollable {
Content = pl
};
Splitter.Panel2.Width = 350;
}
catch (Exception ex)
{
Flowsheet.ShowMessage("Error updating chart property list: " + ex.Message, Interfaces.IFlowsheet.MessageType.GeneralError);
}
});
}
void Initialize()
{
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
var nf = flowsheet.FlowsheetOptions.NumberFormat;
if (section.TipoSegmento == "Tubulaosimples")
{
section.TipoSegmento = "Straight Tube Section";
}
var lblseg = container.CreateAndAddTwoLabelsRow("Segment", section.Indice.ToString());
container.CreateAndAddDropDownRow("Type", sectypes, Array.IndexOf(sectypes.ToArray(), section.TipoSegmento), (sender, e) => section.TipoSegmento = sectypes[sender.SelectedIndex]);
var cbm = container.CreateAndAddDropDownRow("Material", materials, Array.IndexOf(materials.ToArray(), section.Material), (sender, e) => section.Material = materials[sender.SelectedIndex]);
var tbr = container.CreateAndAddTextBoxRow("G8", "Rugosity " + " (" + su.distance + ") *", cv.ConvertFromSI(su.distance, section.PipeWallRugosity), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.PipeWallRugosity = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
var tbtc = container.CreateAndAddStringEditorRow("Thermal Conductivity " + " (" + su.thermalConductivity + ") *", section.PipeWallThermalConductivityExpression, (sender, e) => { section.PipeWallThermalConductivityExpression = sender.Text.ToString(); });
container.CreateAndAddDescriptionRow("* Fields required/used only for User-Defined materials");
container.CreateAndAddTextBoxRow("N0", "Increments", section.Incrementos, (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Incrementos = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow("N0", "Quantity", section.Quantidade, (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Quantidade = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow(nf, "Length" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Comprimento), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Comprimento = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddTextBoxRow(nf, "Elevation" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Elevacao), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Elevacao = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
var edtb = container.CreateAndAddTextBoxRow(nf, "External Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DE), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.DE = cv.Convert(su.diameter, "in", sender.Text.ParseExpressionToDouble());
}
});
var idtb = container.CreateAndAddTextBoxRow(nf, "Internal Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DI), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.DI = cv.Convert(su.diameter, "in", sender.Text.ParseExpressionToDouble());
}
});
var ssizes = Pipe.GetStandardPipeSizes();
var cmenussizes = new ContextMenu();
foreach (var key in ssizes.Keys)
{
var mi = new ButtonMenuItem {
Text = key
};
foreach (var item in ssizes[key])
{
var mi2 = new ButtonMenuItem
{
Text = item.StandardSizeDescription + " (OD = " +
item.ExternalDiameter_Inches + " in., ID = " +
item.InternalDiameter_Inches + " in.)"
};
mi2.Click += (s, e) =>
{
flowsheet.RunCodeOnUIThread(() =>
{
edtb.Text = item.ExternalDiameter_Inches.ConvertUnits("in", su.diameter).ToString(nf);
idtb.Text = item.InternalDiameter_Inches.ConvertUnits("in", su.diameter).ToString(nf);
});
};
mi.Items.Add(mi2);
}
cmenussizes.Items.Add(mi);
}
container.CreateAndAddButtonRow("Standard Pipe Sizes...", null, (btn, ev) =>
{
cmenussizes.Show(btn);
});
tbr.ReadOnly = section.Material != flowsheet.GetTranslatedString("UserDefined");
tbtc.ReadOnly = tbr.ReadOnly;
if (tbr.ReadOnly)
{
tbr.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbtc.BackgroundColor = Eto.Drawing.Colors.LightGrey;
}
else
{
tbr.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbtc.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
}
cbm.SelectedValueChanged += (sender, e) =>
{
if (cbm.SelectedValue.ToString() == flowsheet.GetTranslatedString("UserDefined"))
{
tbr.ReadOnly = false;
tbtc.ReadOnly = false;
tbr.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbtc.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbr.Text = section.PipeWallRugosity.ConvertFromSI(su.distance).ToString(nf);
tbtc.Text = section.PipeWallThermalConductivityExpression;
tbtc.TextAlignment = TextAlignment.Left;
}
else
{
tbr.ReadOnly = true;
tbtc.ReadOnly = true;
tbr.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbtc.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbr.Text = pipe.GetRugosity(cbm.SelectedValue.ToString(), section).ConvertFromSI(su.distance).ToString(nf);
if (pipe.GraphicObject != null && pipe.GraphicObject.InputConnectors[0].IsAttached)
{
var stream = (MaterialStream)flowsheet.SimulationObjects[pipe.GraphicObject.InputConnectors[0].AttachedConnector.AttachedFrom.Name];
tbtc.Text = pipe.k_parede(cbm.SelectedValue.ToString(), stream.GetTemperature(), section).ConvertFromSI(su.thermalConductivity).ToString(nf);
}
else
{
tbtc.Text = pipe.k_parede(cbm.SelectedValue.ToString(), 298.15, section).ConvertFromSI(su.thermalConductivity).ToString(nf);
}
tbtc.TextAlignment = TextAlignment.Right;
}
};
}
public PIDTuningTool(Shared.Flowsheet fs, DynamicsIntegratorControl intcontrol) : base()
{
Flowsheet = fs;
intc = intcontrol;
Padding = new Eto.Drawing.Padding(5);
Spacing = new Size(5, 5);
Padding = new Eto.Drawing.Padding(5);
Spacing = new Size(10, 10);
var leftcontainer = new DynamicLayout {
Width = 300
};
leftcontainer.CreateAndAddLabelRow("Schedule");
var schlist = Flowsheet.DynamicsManager.ScheduleList.Values.ToList();
var cbSchedule = leftcontainer.CreateAndAddDropDownRow("Schedule", schlist.Select((x) => x.Description).ToList(), 0,
(dd, e) => schedule = schlist[dd.SelectedIndex]);
leftcontainer.CreateAndAddLabelRow("Controllers");
leftcontainer.CreateAndAddDescriptionRow("Select the PID Controllers to tune.");
var listb = new CheckBoxList()
{
Height = 200
};
foreach (var obj in Flowsheet.SimulationObjects.Values.Where((x) => x.ObjectClass == Interfaces.Enums.SimulationObjectClass.Controllers))
{
listb.Items.Add(obj.GraphicObject.Tag, obj.Name);
}
leftcontainer.CreateAndAddControlRow(listb);
leftcontainer.CreateAndAddNumericEditorRow("Maximum Iterations", iterations, 5, 100, 0,
(ns, e) =>
{
iterations = (int)ns.Value;
});
var btnRun = leftcontainer.CreateAndAddButtonRow("Begin Tuning", null, null);
var btnCancel = leftcontainer.CreateAndAddButtonRow("Cancel", null, (btn, e) => Abort = true);
txtResults = new TextArea {
ReadOnly = true, Wrap = true
};
Rows.Add(new TableRow(leftcontainer, new Scrollable {
Content = txtResults
}));
btnRun.Click += (s, e) =>
{
Flowsheet.RunCodeOnUIThread(() =>
{
txtResults.Text = "";
if (!Flowsheet.DynamicMode)
{
txtResults.Text += "Error: Dynamic Mode is not activated. Activate Dynamic Mode and try again.";
return;
}
intc.cbsc.SelectedIndex = cbSchedule.SelectedIndex;
var schedule = Flowsheet.DynamicsManager.ScheduleList[Flowsheet.DynamicsManager.CurrentSchedule];
List <OptSimplexBoundVariable> vars = new List <OptSimplexBoundVariable>();
List <PIDController> controllers = new List <PIDController>();
foreach (var item in listb.SelectedKeys)
{
var controller = (PIDController)Flowsheet.SimulationObjects[item];
controllers.Add(controller);
vars.Add(new OptSimplexBoundVariable(controller.Kp, 0.0, controller.Kp * 10));
vars.Add(new OptSimplexBoundVariable(controller.Ki, 0.0, 100.0));
vars.Add(new OptSimplexBoundVariable(controller.Kd, 0.0, 100.0));
}
btnRun.Enabled = false;
btnCancel.Enabled = true;
Simplex simplex = new Simplex();
simplex.MaxFunEvaluations = iterations;
Abort = false;
int counter = 1;
if (schedule.InitialFlowsheetStateID == "" | schedule.UseCurrentStateAsInitial)
{
txtResults.Text += "The selected schedule must have a valid initial state to start from.";
btnRun.Enabled = true;
btnCancel.Enabled = false;
return;
}
var result = simplex.ComputeMin(x =>
{
if (Abort)
{
return(0.0);
}
Flowsheet.RunCodeOnUIThread(() =>
{
txtResults.Text += (string.Format("Beginning Iteration #{0}...\n", counter));
});
intc.RestoreState(schedule.InitialFlowsheetStateID);
var i = 0;
foreach (var controller in controllers)
{
controller.Kp = x[i];
controller.Ki = x[i + 1];
controller.Kd = x[i + 2];
Flowsheet.RunCodeOnUIThread(() =>
{
txtResults.Text += (string.Format("Controller: {0} - Kp = {1}, Ki = {2}, Kd = {3}\n", controller.GraphicObject.Tag, controller.Kp, controller.Ki, controller.Kd));
});
i += 3;
}
intc.RunIntegrator(false, true);
var totalerror = controllers.Select(c => c.CumulativeError).ToArray().AbsSumY();
Flowsheet.RunCodeOnUIThread(() =>
{
txtResults.Text += (string.Format("Total Error: {0}\n", totalerror));
txtResults.CaretIndex = txtResults.Text.Length - 1;
});
Application.Instance.RunIteration();
counter += 1;
return(totalerror);
}, vars.ToArray());
if (Abort)
{
txtResults.Text += (string.Format("Tuning aborted by the user. Results:\n"));
}
else
{
txtResults.Text += (string.Format("Tuning finished successfully. Results:\n"));
}
var j = 0;
foreach (var controller in controllers)
{
controller.Kp = result[j];
controller.Ki = result[j + 1];
controller.Kd = result[j + 2];
txtResults.Text += (string.Format("Controller: {0} - Kp = {1}, Ki = {2}, Kd = {3}\n", controller.GraphicObject.Tag, controller.Kp, controller.Ki, controller.Kd));
j += 3;
}
btnRun.Enabled = true;
btnCancel.Enabled = false;
Flowsheet.UpdateInterface();
});
};
}
