/// <summary>
/// Return geometry for a particular representation item.
/// </summary>
/// <param name="shapeEditScope">The geometry creation scope.</param>
/// <param name="unscaledLcs">The unscaled local coordinate system for the geometry, if the scaled version isn't supported downstream.</param>
/// <param name="scaledLcs">The scaled (true) local coordinate system for the geometry.</param>
/// <param name="guid">The guid of an element for which represntation is being created.</param>
/// <returns>The created geometry.</returns>
protected override IList <GeometryObject> CreateGeometryInternal(
IFCImportShapeEditScope shapeEditScope, Transform unscaledLcs, Transform scaledLcs, string guid)
{
Transform unscaledObjectPosition = (unscaledLcs == null) ? Position : unscaledLcs.Multiply(Position);
Transform scaledObjectPosition = (scaledLcs == null) ? Position : scaledLcs.Multiply(Position);
CurveLoop baseProfileCurve = Directrix.GetCurveLoop();
if (baseProfileCurve == null)
{
return(null);
}
CurveLoop trimmedDirectrix = IFCGeometryUtil.TrimCurveLoop(Id, baseProfileCurve, StartParameter, EndParameter);
if (trimmedDirectrix == null)
{
return(null);
}
double startParam = 0.0; // If the directrix isn't bound, this arbitrary parameter will do.
Transform originTrf0 = null;
Curve firstCurve0 = trimmedDirectrix.First();
if (firstCurve0.IsBound)
{
startParam = firstCurve0.GetEndParameter(0);
}
originTrf0 = firstCurve0.ComputeDerivatives(startParam, false);
if (originTrf0 == null)
{
return(null);
}
// Note: the computation of the reference Surface Local Transform must be done before the directrix is transform to LCS (because the ref surface isn't)
// and therefore the origin is at the start of the curve should be the start of the directrix that lies on the surface.
// This is needed to transform the swept area that must be perpendicular to the start of the directrix curve
Transform referenceSurfaceLocalTransform = ReferenceSurface.GetTransformAtPoint(originTrf0.Origin);
CurveLoop trimmedDirectrixInLCS = IFCGeometryUtil.CreateTransformed(trimmedDirectrix, Id, unscaledObjectPosition, scaledObjectPosition);
// Create the sweep.
Transform originTrf = null;
Curve firstCurve = trimmedDirectrixInLCS.First();
//if (firstCurve.IsBound)
// startParam = firstCurve.GetEndParameter(0);
originTrf = firstCurve.ComputeDerivatives(startParam, false);
Transform unscaledReferenceSurfaceTransform = unscaledObjectPosition.Multiply(referenceSurfaceLocalTransform);
Transform scaledReferenceSurfaceTransform = scaledObjectPosition.Multiply(referenceSurfaceLocalTransform);
Transform profileCurveLoopsTransform = Transform.CreateTranslation(originTrf.Origin);
profileCurveLoopsTransform.BasisX = scaledReferenceSurfaceTransform.BasisZ;
profileCurveLoopsTransform.BasisZ = originTrf.BasisX.Normalize();
profileCurveLoopsTransform.BasisY = profileCurveLoopsTransform.BasisZ.CrossProduct(profileCurveLoopsTransform.BasisX);
ISet <IList <CurveLoop> > profileCurveLoops = GetTransformedCurveLoops(profileCurveLoopsTransform, profileCurveLoopsTransform);
if (profileCurveLoops == null || profileCurveLoops.Count == 0)
{
return(null);
}
SolidOptions solidOptions = new SolidOptions(GetMaterialElementId(shapeEditScope), shapeEditScope.GraphicsStyleId);
IList <GeometryObject> myObjs = new List <GeometryObject>();
foreach (IList <CurveLoop> loops in profileCurveLoops)
{
GeometryObject myObj = GeometryCreationUtilities.CreateSweptGeometry(trimmedDirectrixInLCS, 0, startParam, loops, solidOptions);
if (myObj != null)
{
myObjs.Add(myObj);
}
}
return(myObjs);
}
/// <summary>
/// Return geometry for a particular representation item.
/// </summary>
/// <param name="shapeEditScope">The geometry creation scope.</param>
/// <param name="lcs">Local coordinate system for the geometry.</param>
/// <param name="guid">The guid of an element for which represntation is being created.</param>
/// <returns>The created geometry.</returns>
protected override IList <GeometryObject> CreateGeometryInternal(
IFCImportShapeEditScope shapeEditScope, Transform lcs, Transform scaledLcs, string guid)
{
Transform objectPosition = (lcs == null) ? Position : lcs.Multiply(Position);
CurveLoop baseProfileCurve = Directrix.GetCurveLoop();
if (baseProfileCurve == null)
{
return(null);
}
CurveLoop trimmedDirectrix = IFCGeometryUtil.TrimCurveLoop(baseProfileCurve, StartParameter, EndParameter);
if (trimmedDirectrix == null)
{
return(null);
}
CurveLoop trimmedDirectrixInLCS = IFCGeometryUtil.CreateTransformed(trimmedDirectrix, objectPosition);
// Create the sweep.
double startParam = 0.0; // If the directrix isn't bound, this arbitrary parameter will do.
Transform originTrf = null;
Curve firstCurve = trimmedDirectrixInLCS.First();
if (firstCurve.IsBound)
{
startParam = firstCurve.GetEndParameter(0);
}
originTrf = firstCurve.ComputeDerivatives(startParam, false);
if (originTrf == null)
{
return(null);
}
Transform referenceSurfaceLocalTransform = ReferenceSurface.GetTransformAtPoint(originTrf.Origin);
Transform referenceSurfaceTransform = objectPosition.Multiply(referenceSurfaceLocalTransform);
Transform profileCurveLoopsTransform = Transform.CreateTranslation(originTrf.Origin);
profileCurveLoopsTransform.BasisX = referenceSurfaceTransform.BasisZ;
profileCurveLoopsTransform.BasisZ = originTrf.BasisX.Normalize();
profileCurveLoopsTransform.BasisY = profileCurveLoopsTransform.BasisZ.CrossProduct(profileCurveLoopsTransform.BasisX);
ISet <IList <CurveLoop> > profileCurveLoops = GetTransformedCurveLoops(profileCurveLoopsTransform);
if (profileCurveLoops == null || profileCurveLoops.Count == 0)
{
return(null);
}
SolidOptions solidOptions = new SolidOptions(GetMaterialElementId(shapeEditScope), shapeEditScope.GraphicsStyleId);
IList <GeometryObject> myObjs = new List <GeometryObject>();
foreach (IList <CurveLoop> loops in profileCurveLoops)
{
GeometryObject myObj = GeometryCreationUtilities.CreateSweptGeometry(trimmedDirectrixInLCS, 0, startParam, loops, solidOptions);
if (myObj != null)
{
myObjs.Add(myObj);
}
}
return(myObjs);
}
/// <summary>
/// Return geometry for a particular representation item.
/// </summary>
/// <param name="shapeEditScope">The geometry creation scope.</param>
/// <param name="lcs">Local coordinate system for the geometry, without scale.</param>
/// <param name="scaledLcs">Local coordinate system for the geometry, including scale, potentially non-uniform.</param>
/// <param name="guid">The guid of an element for which represntation is being created.</param>
/// <returns>Zero or more created geometries.</returns>
protected override IList <GeometryObject> CreateGeometryInternal(
IFCImportShapeEditScope shapeEditScope, Transform lcs, Transform scaledLcs, string guid)
{
Transform sweptDiskPosition = (lcs == null) ? Transform.Identity : lcs;
CurveLoop baseProfileCurve = Directrix.GetCurveLoop();
if (baseProfileCurve == null)
{
return(null);
}
CurveLoop trimmedDirectrix = IFCGeometryUtil.TrimCurveLoop(baseProfileCurve, StartParameter, EndParameter);
if (trimmedDirectrix == null)
{
return(null);
}
CurveLoop trimmedDirectrixInLCS = IFCGeometryUtil.CreateTransformed(trimmedDirectrix, sweptDiskPosition);
// Create the disk.
Transform originTrf = null;
double startParam = 0.0; // If the directrix isn't bound, this arbitrary parameter will do.
foreach (Curve curve in trimmedDirectrixInLCS)
{
if (curve.IsBound)
{
startParam = curve.GetEndParameter(0);
}
originTrf = curve.ComputeDerivatives(startParam, false);
break;
}
if (originTrf == null)
{
return(null);
}
// The X-dir of the transform of the start of the directrix will form the normal of the disk.
Plane diskPlane = new Plane(originTrf.BasisX, originTrf.Origin);
IList <CurveLoop> profileCurveLoops = new List <CurveLoop>();
CurveLoop diskOuterCurveLoop = new CurveLoop();
diskOuterCurveLoop.Append(Arc.Create(diskPlane, Radius, 0, Math.PI));
diskOuterCurveLoop.Append(Arc.Create(diskPlane, Radius, Math.PI, 2.0 * Math.PI));
profileCurveLoops.Add(diskOuterCurveLoop);
if (InnerRadius.HasValue)
{
CurveLoop diskInnerCurveLoop = new CurveLoop();
diskInnerCurveLoop.Append(Arc.Create(diskPlane, InnerRadius.Value, 0, Math.PI));
diskInnerCurveLoop.Append(Arc.Create(diskPlane, InnerRadius.Value, Math.PI, 2.0 * Math.PI));
profileCurveLoops.Add(diskInnerCurveLoop);
}
SolidOptions solidOptions = new SolidOptions(GetMaterialElementId(shapeEditScope), shapeEditScope.GraphicsStyleId);
Solid sweptDiskSolid = GeometryCreationUtilities.CreateSweptGeometry(trimmedDirectrixInLCS, 0, startParam, profileCurveLoops,
solidOptions);
IList <GeometryObject> myObjs = new List <GeometryObject>();
if (sweptDiskSolid != null)
{
myObjs.Add(sweptDiskSolid);
}
return(myObjs);
}
/// <summary>
/// Return geometry for a particular representation item.
/// </summary>
/// <param name="shapeEditScope">The geometry creation scope.</param>
/// <param name="lcs">Local coordinate system for the geometry, without scale.</param>
/// <param name="scaledLcs">Local coordinate system for the geometry, including scale, potentially non-uniform.</param>
/// <param name="guid">The guid of an element for which represntation is being created.</param>
/// <returns>Zero or more created geometries.</returns>
protected override IList <GeometryObject> CreateGeometryInternal(
IFCImportShapeEditScope shapeEditScope, Transform lcs, Transform scaledLcs, string guid)
{
Transform sweptDiskPosition = (lcs == null) ? Transform.Identity : lcs;
CurveLoop baseProfileCurve = Directrix.GetCurveLoop();
if (baseProfileCurve == null)
{
return(null);
}
CurveLoop trimmedDirectrix = IFCGeometryUtil.TrimCurveLoop(baseProfileCurve, StartParameter, EndParameter);
if (trimmedDirectrix == null)
{
return(null);
}
CurveLoop trimmedDirectrixInWCS = IFCGeometryUtil.CreateTransformed(trimmedDirectrix, sweptDiskPosition);
// Create the disk.
Curve firstCurve = null;
foreach (Curve curve in trimmedDirectrixInWCS)
{
firstCurve = curve;
break;
}
double startParam = 0.0;
IList <CurveLoop> profileCurveLoops = CreateProfileCurveLoopsForDirectrix(firstCurve, out startParam);
if (profileCurveLoops == null)
{
return(null);
}
SolidOptions solidOptions = new SolidOptions(GetMaterialElementId(shapeEditScope), shapeEditScope.GraphicsStyleId);
IList <GeometryObject> myObjs = new List <GeometryObject>();
try
{
Solid sweptDiskSolid = GeometryCreationUtilities.CreateSweptGeometry(trimmedDirectrixInWCS, 0, startParam, profileCurveLoops,
solidOptions);
if (sweptDiskSolid != null)
{
myObjs.Add(sweptDiskSolid);
}
}
catch (Exception ex)
{
// If we can't create a solid, we will attempt to split the Solid into valid pieces (that will likely have some overlap).
if (ex.Message.Contains("self-intersections"))
{
Importer.TheLog.LogWarning(Id, "The IfcSweptDiskSolid definition does not define a valid solid, likely due to self-intersections or other such problems; the profile probably extends too far toward the inner curvature of the sweep path. Creating the minimum number of solids possible to represent the geometry.", false);
myObjs = SplitSweptDiskIntoValidPieces(trimmedDirectrixInWCS, profileCurveLoops, solidOptions);
}
else
{
throw ex;
}
}
return(myObjs);
}
