public SetupStepComPortManual(PrinterConfig printer)
{
this.printer = printer;
FlowLayoutWidget printerComPortContainer = CreateComPortContainer();
contentRow.AddChild(printerComPortContainer);
// Construct buttons
nextButton = theme.CreateDialogButton("Done".Localize());
nextButton.Click += (s, e) => Parent.Close();
nextButton.Visible = false;
connectButton = theme.CreateDialogButton("Connect".Localize());
connectButton.Click += (s, e) =>
{
try
{
printerComPortHelpLink.Visible = false;
printerComPortError.TextColor = theme.TextColor;
printerComPortError.Text = "Attempting to connect".Localize() + "...";
printerComPortError.TextColor = theme.TextColor;
printer.Connection.ConnectionFailed += Connection_CommunicationStateChanged;
printer.Connection.ConnectionSucceeded += Connection_CommunicationStateChanged;
printer.Settings.Helpers.SetComPort(GetSelectedSerialPort());
printer.Connection.Connect();
connectButton.Visible = false;
refreshButton.Visible = false;
}
catch
{
printerComPortHelpLink.Visible = false;
printerComPortError.TextColor = Color.Red;
printerComPortError.Text = "Oops! Please select a serial port.".Localize();
}
};
refreshButton = theme.CreateDialogButton("Refresh".Localize());
refreshButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupStepComPortManual(printer));
});
this.AddPageAction(nextButton);
this.AddPageAction(connectButton);
this.AddPageAction(refreshButton);
// Register listeners
printer.Connection.CommunicationStateChanged += Connection_CommunicationStateChanged;
}
protected override void OnCancel(out bool abortCancel)
{
if (!ProfileManager.Instance.ActiveProfiles.Any())
{
abortCancel = true;
UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage <SetupStepMakeModelName>();
});
}
abortCancel = false;
}
public SetupStepComPortTwo(PrinterConfig printer)
{
this.printer = printer;
startingPortNames = FrostedSerialPort.GetPortNames();
contentRow.AddChild(createPrinterConnectionMessageContainer());
//Construct buttons
nextButton = theme.CreateDialogButton("Done".Localize());
nextButton.Click += (s, e) => Parent.Close();
nextButton.Visible = false;
connectButton = theme.CreateDialogButton("Connect".Localize());
connectButton.Click += (s, e) =>
{
// Select the first port that's in GetPortNames() but not in startingPortNames
string candidatePort = FrostedSerialPort.GetPortNames().Except(startingPortNames).FirstOrDefault();
if (candidatePort == null)
{
printerErrorMessage.TextColor = Color.Red;
printerErrorMessage.Text = "Oops! Printer could not be detected ".Localize();
}
else
{
printerErrorMessage.TextColor = theme.TextColor;
printerErrorMessage.Text = "Attempting to connect".Localize() + "...";
printer.Settings.Helpers.SetComPort(candidatePort);
printer.Connection.Connect();
connectButton.Visible = false;
}
};
var backButton = theme.CreateDialogButton("<< Back".Localize());
backButton.Click += (s, e) =>
{
DialogWindow.ChangeToPage(new SetupStepComPortOne(printer));
};
this.AddPageAction(nextButton);
this.AddPageAction(backButton);
this.AddPageAction(connectButton);
// Register listeners
printer.Connection.CommunicationStateChanged += Connection_CommunicationStateChanged;
}
public FlowLayoutWidget createPrinterConnectionMessageContainer()
{
FlowLayoutWidget container = new FlowLayoutWidget(FlowDirection.TopToBottom);
container.VAnchor = VAnchor.Stretch;
container.Margin = new BorderDouble(5);
BorderDouble elementMargin = new BorderDouble(top: 5);
string printerMessageOneText = "MatterControl will now attempt to auto-detect printer.".Localize();
TextWidget printerMessageOne = new TextWidget(printerMessageOneText, 0, 0, 10);
printerMessageOne.Margin = new BorderDouble(0, 10, 0, 5);
printerMessageOne.TextColor = ActiveTheme.Instance.PrimaryTextColor;
printerMessageOne.HAnchor = HAnchor.Stretch;
printerMessageOne.Margin = elementMargin;
string printerMessageFourBeg = "Connect printer and power on".Localize();
string printerMessageFourFull = string.Format("1.) {0}.", printerMessageFourBeg);
TextWidget printerMessageFour = new TextWidget(printerMessageFourFull, 0, 0, 12);
printerMessageFour.TextColor = ActiveTheme.Instance.PrimaryTextColor;
printerMessageFour.HAnchor = HAnchor.Stretch;
printerMessageFour.Margin = elementMargin;
string printerMessageFiveTxtBeg = "Press".Localize();
string printerMessageFiveTxtEnd = "Connect".Localize();
string printerMessageFiveTxtFull = string.Format("2.) {0} '{1}'.", printerMessageFiveTxtBeg, printerMessageFiveTxtEnd);
TextWidget printerMessageFive = new TextWidget(printerMessageFiveTxtFull, 0, 0, 12);
printerMessageFive.TextColor = ActiveTheme.Instance.PrimaryTextColor;
printerMessageFive.HAnchor = HAnchor.Stretch;
printerMessageFive.Margin = elementMargin;
GuiWidget vSpacer = new GuiWidget();
vSpacer.VAnchor = VAnchor.Stretch;
var manualLink = new LinkLabel("Manual Configuration".Localize(), theme)
{
Margin = new BorderDouble(0, 5),
TextColor = theme.Colors.PrimaryTextColor
};
manualLink.Click += (s, e) => UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupStepComPortManual(printer));
});
printerErrorMessage = new TextWidget("", 0, 0, 10)
{
AutoExpandBoundsToText = true,
TextColor = Color.Red,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageOne);
container.AddChild(printerMessageFour);
container.AddChild(printerErrorMessage);
container.AddChild(vSpacer);
container.AddChild(manualLink);
container.HAnchor = HAnchor.Stretch;
return(container);
}
public SetupStepMakeModelName()
{
bool userIsLoggedIn = !ApplicationController.GuestUserActive?.Invoke() ?? false;
this.HeaderText = this.WindowTitle = "Printer Setup".Localize();
this.WindowSize = new VectorMath.Vector2(800 * GuiWidget.DeviceScale, 600 * GuiWidget.DeviceScale);
contentRow.BackgroundColor = theme.SectionBackgroundColor;
nextButton = theme.CreateDialogButton("Next".Localize());
printerPanel = new AddPrinterWidget(theme, (enabled) =>
{
nextButton.Enabled = enabled;
})
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch
};
if (userIsLoggedIn)
{
contentRow.AddChild(printerPanel);
contentRow.Padding = 0;
}
else
{
contentRow.Padding = theme.DefaultContainerPadding;
printerPanel.Margin = new BorderDouble(left: 15, top: theme.DefaultContainerPadding);
var commonMargin = new BorderDouble(4, 2);
// Create export button for each plugin
signInRadioButton = new RadioButton(new RadioButtonViewText("Sign in to access your existing printers".Localize(), theme.TextColor))
{
HAnchor = HAnchor.Left,
Margin = commonMargin.Clone(bottom: 10),
Cursor = Cursors.Hand,
Name = "Sign In Radio Button",
};
contentRow.AddChild(signInRadioButton);
createPrinterRadioButton = new RadioButton(new RadioButtonViewText("Create a new printer", theme.TextColor))
{
HAnchor = HAnchor.Left,
Margin = commonMargin,
Cursor = Cursors.Hand,
Name = "Create Printer Radio Button",
Checked = true
};
contentRow.AddChild(createPrinterRadioButton);
createPrinterRadioButton.CheckedStateChanged += (s, e) =>
{
printerPanel.Enabled = createPrinterRadioButton.Checked;
this.SetElementVisibility();
};
contentRow.AddChild(printerPanel);
}
nextButton.Name = "Next Button";
nextButton.Click += (s, e) => UiThread.RunOnIdle(async() =>
{
if (signInRadioButton?.Checked == true)
{
var authContext = new AuthenticationContext();
authContext.SignInComplete += (s2, e2) =>
{
this.DialogWindow.ChangeToPage(new OpenPrinterPage("Finish".Localize()));
};
this.DialogWindow.ChangeToPage(ApplicationController.GetAuthPage(authContext));
}
else
{
bool controlsValid = printerPanel.ValidateControls();
if (controlsValid &&
printerPanel.SelectedPrinter is AddPrinterWidget.MakeModelInfo selectedPrinter)
{
var printer = await ProfileManager.CreatePrinterAsync(selectedPrinter.Make, selectedPrinter.Model, printerPanel.NewPrinterName);
if (printer == null)
{
printerPanel.SetError("Error creating profile".Localize());
return;
}
UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(AppContext.Platform.GetConnectDevicePage(printer) as DialogPage);
});
}
}
});
var printerNotListedButton = theme.CreateDialogButton("Define New".Localize());
printerNotListedButton.ToolTipText = "Select this option only if your printer does not appear in the list".Localize();
printerNotListedButton.Click += async(s, e) =>
{
var printer = await ProfileManager.CreatePrinterAsync("Other", "Other", "Custom Printer");
if (printer == null)
{
printerPanel.SetError("Error creating profile".Localize());
return;
}
UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupCustomPrinter(printer) as DialogPage);
});
};
this.AddPageAction(printerNotListedButton, false);
this.AddPageAction(nextButton);
SetElementVisibility();
}
public SetupStepComPortOne(PrinterConfig printer)
{
this.WindowTitle = "Setup Wizard".Localize();
var container = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
VAnchor = VAnchor.Stretch,
Margin = new BorderDouble(5),
HAnchor = HAnchor.Stretch
};
var elementMargin = new BorderDouble(top: 5);
var printerMessageOne = new TextWidget("MatterControl will now attempt to auto-detect your printer.".Localize(), 0, 0, 10)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageOne);
var printerMessageTwo = new WrappedTextWidget(string.Format("1.) {0} ({1}).", "Unplug printer USB cable from computer".Localize(), "if connected".Localize()), 12)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageTwo);
var printerMessageThree = new TextWidget(string.Format("2.) {0} '{1}'.", "Press".Localize(), "Continue".Localize()), 0, 0, 12)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageThree);
var removeImage = StaticData.Instance.LoadImage(Path.Combine("Images", "remove usb.png"));
removeImage.SetRecieveBlender(new BlenderPreMultBGRA());
container.AddChild(new ImageWidget(removeImage)
{
HAnchor = HAnchor.Center,
Margin = new BorderDouble(0, 10),
});
GuiWidget vSpacer = new GuiWidget();
vSpacer.VAnchor = VAnchor.Stretch;
container.AddChild(vSpacer);
var setupManualConfigurationOrSkipConnectionWidget = new TextWidget("You can also".Localize() + ":", 0, 0, 10)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(setupManualConfigurationOrSkipConnectionWidget);
var manualLink = new LinkLabel("Manually Configure Connection".Localize(), theme)
{
Margin = new BorderDouble(0, 5),
TextColor = theme.TextColor
};
manualLink.Click += (s, e) => UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupStepComPortManual(printer));
});
container.AddChild(manualLink);
var printerMessageFour = new TextWidget("or".Localize(), 0, 0, 10)
{
TextColor = theme.TextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageFour);
var skipConnectionLink = new LinkLabel("Skip Connection Setup".Localize(), theme)
{
Margin = new BorderDouble(0, 8),
TextColor = theme.TextColor
};
skipConnectionLink.Click += (s, e) =>
{
printer.Connection.HaltConnectionThread();
Parent.Close();
};
container.AddChild(skipConnectionLink);
contentRow.AddChild(container);
// Construct buttons
var nextButton = theme.CreateDialogButton("Continue".Localize());
nextButton.Click += (s, e) =>
{
DialogWindow.ChangeToPage(new SetupStepComPortTwo(printer));
};
this.AddPageAction(nextButton);
}
public SetupStepComPortOne(PrinterConfig printer)
{
this.WindowTitle = "Setup Wizard".Localize();
var container = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
VAnchor = VAnchor.Stretch,
Margin = new BorderDouble(5),
HAnchor = HAnchor.Stretch
};
BorderDouble elementMargin = new BorderDouble(top: 5);
var printerMessageOne = new TextWidget("MatterControl will now attempt to auto-detect printer.".Localize(), 0, 0, 10)
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageOne);
var printerMessageTwo = new TextWidget(string.Format("1.) {0} ({1}).", "Disconnect printer".Localize(), "if currently connected".Localize()), 0, 0, 12)
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageTwo);
var printerMessageThree = new TextWidget(string.Format("2.) {0} '{1}'.", "Press".Localize(), "Continue".Localize()), 0, 0, 12)
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageThree);
GuiWidget vSpacer = new GuiWidget();
vSpacer.VAnchor = VAnchor.Stretch;
container.AddChild(vSpacer);
var setupManualConfigurationOrSkipConnectionWidget = new TextWidget("You can also".Localize() + ":", 0, 0, 10)
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(setupManualConfigurationOrSkipConnectionWidget);
Button manualLink = linkButtonFactory.Generate("Manually Configure Connection".Localize());
manualLink.Margin = new BorderDouble(0, 5);
manualLink.Click += (s, e) => UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupStepComPortManual(printer));
});
container.AddChild(manualLink);
var printerMessageFour = new TextWidget("or".Localize(), 0, 0, 10)
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
HAnchor = HAnchor.Stretch,
Margin = elementMargin
};
container.AddChild(printerMessageFour);
Button skipConnectionLink = linkButtonFactory.Generate("Skip Connection Setup".Localize());
skipConnectionLink.Margin = new BorderDouble(0, 8);
skipConnectionLink.Click += (s, e) => UiThread.RunOnIdle(() =>
{
printer.Connection.HaltConnectionThread();
Parent.Close();
});
container.AddChild(skipConnectionLink);
contentRow.AddChild(container);
//Construct buttons
var nextButton = theme.CreateDialogButton("Continue".Localize());
nextButton.Click += (s, e) => UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupStepComPortTwo(printer));
});
this.AddPageAction(nextButton);
}
public SetupStepMakeModelName()
{
bool userIsLoggedIn = !ApplicationController.GuestUserActive?.Invoke() ?? false;
this.HeaderText = this.WindowTitle = "Printer Setup".Localize();
var addPrinterColumn = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
};
printerManufacturerSelector = new BoundDropList(string.Format("- {0} -", "Select Make".Localize()), theme, maxHeight: 200)
{
HAnchor = HAnchor.Stretch,
Margin = elementMargin,
Name = "Select Make",
ListSource = OemSettings.Instance.AllOems,
TabStop = true
};
printerManufacturerSelector.SelectionChanged += ManufacturerDropList_SelectionChanged;
printerMakeContainer = CreateSelectionContainer(
"Make".Localize() + ":",
"Select the printer manufacturer".Localize(),
printerManufacturerSelector);
printerModelSelector = new BoundDropList(string.Format("- {0} -", "Select Model".Localize()), theme, maxHeight: 200)
{
Name = "Select Model",
HAnchor = HAnchor.Stretch,
Margin = elementMargin,
TabStop = true
};
printerModelSelector.SelectionChanged += ModelDropList_SelectionChanged;
printerModelContainer = CreateSelectionContainer(
"Model".Localize() + ":",
"Select the printer model".Localize(),
printerModelSelector);
//Add inputs to main container
addPrinterColumn.AddChild(printerMakeContainer);
addPrinterColumn.AddChild(printerModelContainer);
addPrinterColumn.AddChild(createPrinterNameContainer());
RadioButton signInRadioButton = null;
if (userIsLoggedIn)
{
contentRow.AddChild(addPrinterColumn);
}
else
{
contentRow.Padding = 10;
addPrinterColumn.Margin = new BorderDouble(28, 15, 15, 5);
var commonMargin = new BorderDouble(4, 2);
// Create export button for each plugin
signInRadioButton = new RadioButton(new RadioButtonViewText("Sign in to access your existing printers".Localize(), theme.Colors.PrimaryTextColor))
{
HAnchor = HAnchor.Left,
Margin = commonMargin.Clone(bottom: 10),
Cursor = Cursors.Hand,
Name = "Sign In Radio Button",
};
contentRow.AddChild(signInRadioButton);
createPrinterRadioButton = new RadioButton(new RadioButtonViewText("Create a new printer", theme.Colors.PrimaryTextColor))
{
HAnchor = HAnchor.Left,
Margin = commonMargin,
Cursor = Cursors.Hand,
Name = "Create Printer Radio Button",
Checked = true
};
contentRow.AddChild(createPrinterRadioButton);
createPrinterRadioButton.CheckedStateChanged += (s, e) =>
{
addPrinterColumn.Enabled = createPrinterRadioButton.Checked;
this.SetElementVisibility();
};
contentRow.AddChild(addPrinterColumn);
}
nextButton = theme.CreateDialogButton("Next".Localize());
nextButton.Name = "Next Button";
nextButton.Click += (s, e) => UiThread.RunOnIdle(async() =>
{
if (signInRadioButton?.Checked == true)
{
var authContext = new AuthenticationContext();
authContext.SignInComplete += (s2, e2) =>
{
this.DialogWindow.ChangeToPage(new SelectPrinterPage("Finish".Localize()));
};
this.DialogWindow.ChangeToPage(ApplicationController.GetAuthPage(authContext));
}
else
{
bool controlsValid = this.ValidateControls();
if (controlsValid)
{
var printer = await ProfileManager.CreateProfileAsync(activeMake, activeModel, activeName);
if (printer == null)
{
this.printerNameError.Text = "Error creating profile".Localize();
this.printerNameError.Visible = true;
return;
}
this.LoadCalibrationPrints();
#if __ANDROID__
UiThread.RunOnIdle(() => DialogWindow.ChangeToPage <AndroidConnectDevicePage>());
#else
UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupStepComPortOne(printer));
});
#endif
}
}
});
this.AddPageAction(nextButton);
usingDefaultName = true;
if (printerManufacturerSelector.MenuItems.Count == 1)
{
printerManufacturerSelector.SelectedIndex = 0;
}
SetElementVisibility();
}
public SetupStepMakeModelName()
{
this.WindowTitle = "Setup Wizard".Localize();
printerManufacturerSelector = new BoundDropList(string.Format("- {0} -", "Select Make".Localize()), theme, maxHeight: 200)
{
HAnchor = HAnchor.Stretch,
Margin = elementMargin,
Name = "Select Make",
ListSource = OemSettings.Instance.AllOems,
TabStop = true
};
printerManufacturerSelector.SelectionChanged += ManufacturerDropList_SelectionChanged;
printerMakeContainer = CreateSelectionContainer(
"Make".Localize() + ":",
"Select the printer manufacturer".Localize(),
printerManufacturerSelector);
printerModelSelector = new BoundDropList(string.Format("- {0} -", "Select Model".Localize()), theme, maxHeight: 200)
{
Name = "Select Model",
HAnchor = HAnchor.Stretch,
Margin = elementMargin,
TabStop = true
};
printerModelSelector.SelectionChanged += ModelDropList_SelectionChanged;
printerModelContainer = CreateSelectionContainer("Model".Localize() + ":", "Select the printer model".Localize(), printerModelSelector);
//Add inputs to main container
contentRow.AddChild(printerMakeContainer);
contentRow.AddChild(printerModelContainer);
contentRow.AddChild(createPrinterNameContainer());
//Construct buttons
nextButton = theme.CreateDialogButton("Next".Localize());
nextButton.Name = "Save & Continue Button";
nextButton.Click += async(s, e) =>
{
bool controlsValid = this.ValidateControls();
if (controlsValid)
{
var printer = await ProfileManager.CreateProfileAsync(activeMake, activeModel, activeName);
if (printer == null)
{
this.printerNameError.Text = "Error creating profile".Localize();
this.printerNameError.Visible = true;
return;
}
LoadCalibrationPrints();
#if __ANDROID__
UiThread.RunOnIdle(() => DialogWindow.ChangeToPage <AndroidConnectDevicePage>());
#else
UiThread.RunOnIdle(() =>
{
DialogWindow.ChangeToPage(new SetupStepComPortOne(printer));
});
#endif
}
};
this.AddPageAction(nextButton);
usingDefaultName = true;
if (printerManufacturerSelector.MenuItems.Count == 1)
{
printerManufacturerSelector.SelectedIndex = 0;
}
SetElementVisibility();
}
public SetupStepComPortTwo(PrinterConfig printer)
{
this.printer = printer;
startingPortNames = FrostedSerialPort.GetPortNames();
contentRow.AddChild(createPrinterConnectionMessageContainer());
//Construct buttons
nextButton = theme.CreateDialogButton("Done".Localize());
nextButton.Click += (s, e) => Parent.Close();
nextButton.Visible = false;
var connectButtonHasBeenClicked = false;
void CheckOnPorts()
{
string candidatePort = FrostedSerialPort.GetPortNames().Except(startingPortNames).FirstOrDefault();
if (candidatePort != null)
{
// we found a new added port click the connect button for the user
connectButton.InvokeClick();
}
else if (!connectButtonHasBeenClicked && this.ActuallyVisibleOnScreen())
{
// keep checking as long as this is open
UiThread.RunOnIdle(CheckOnPorts, .2);
}
}
UiThread.RunOnIdle(CheckOnPorts, .2);
connectButton = theme.CreateDialogButton("Connect".Localize());
connectButton.Click += (s, e) =>
{
connectButtonHasBeenClicked = true;
// Select the first port that's in GetPortNames() but not in startingPortNames
foundPort = FrostedSerialPort.GetPortNames().Except(startingPortNames).FirstOrDefault();
if (foundPort == null)
{
foundPort = FrostedSerialPort.GetPortNames(includeEmulator: false).LastOrDefault();
if (foundPort != null)
{
// try to connect to the last port found
printerConnectionMessage.TextColor = theme.TextColor;
printerConnectionMessage.Text = "Attempting to connect to {0}".Localize().FormatWith(foundPort) + "...";
printer.Settings.Helpers.SetComPort(foundPort);
printer.Connection.Connect();
connectButton.Visible = false;
}
else
{
// no com port was found, attempt to connect to a com port if there is any
printerConnectionMessage.TextColor = Color.Red;
printerConnectionMessage.Text = "Oops! Printer could not be detected ".Localize();
}
}
else
{
printerConnectionMessage.TextColor = theme.TextColor;
printerConnectionMessage.Text = "Attempting to connect to {0}".Localize().FormatWith(foundPort) + "...";
printer.Settings.Helpers.SetComPort(foundPort);
printer.Connection.Connect();
connectButton.Visible = false;
}
};
var backButton = theme.CreateDialogButton("<< Back".Localize());
backButton.Click += (s, e) =>
{
DialogWindow.ChangeToPage(new SetupStepComPortOne(printer));
};
this.AddPageAction(nextButton);
this.AddPageAction(backButton);
this.AddPageAction(connectButton);
// Register listeners
printer.Connection.CommunicationStateChanged += Connection_CommunicationStateChanged;
}