/// <summary>
/// Initializes a new instance of the <see cref="ConfigureRadioStackRequest"/> class.
/// </summary>
/// <param name="dataRateIndex">Default Data Rate Index.</param>
/// <param name="adaptiveDataRateEnabled">Adaptive Data Rate enabled/disabled.</param>
/// <param name="dutyCycleControlEnabled">Duty Cycle Control enabled/disabled. (Customer Mode Required).</param>
/// <param name="isClassC">Class indicator. Class A if false, Class C device if true.</param>
/// <param name="extendedOutputFormatEnabled">Extended RF packet output format: Tx/Rx channel info attached if true.</param>
/// <param name="rxMacForwardingEnabled">Rx MAC Command Forwarding enabled/disabled.</param>
/// <param name="powerSavingEnabled">Power Saving. Off is false, automatic if true.</param>
/// <param name="retryAttemps">Maximum number of retries for a reliable radio packet (parameter range: 0 to 254).</param>
/// <param name="headerMacCmdCapacity">Maximum length of the MAC commands to be piggybacked in the header (parameter range: 0 to 15).</param>
public ConfigureRadioStackRequest(
DataRateIndex dataRateIndex,
bool adaptiveDataRateEnabled = false,
bool dutyCycleControlEnabled = true,
bool isClassC = true,
bool extendedOutputFormatEnabled = true,
bool rxMacForwardingEnabled = true,
bool powerSavingEnabled = false,
byte retryAttemps = 10,
byte headerMacCmdCapacity = 15)
: base(LoRaWanMessageIdentifier.SetRadioStackRequest, new List <byte>())
{
var dataRateByte = (byte)dataRateIndex;
byte trxLevel = 0x10; // 16 in dec
var powerSavingByte = powerSavingEnabled ? (byte)0x01 : (byte)0x00;
var optionsByte = BuildOptionsByte(adaptiveDataRateEnabled, dutyCycleControlEnabled, isClassC, extendedOutputFormatEnabled, rxMacForwardingEnabled);
byte bandIndex = 0x01; // Doesn't seem to work with any other value than 1. Could be a bug, but I can't be assed to investigate. Or maybe something with regions...
Payload !.Add(dataRateByte);
Payload !.Add(trxLevel);
Payload !.Add(optionsByte);
Payload !.Add(powerSavingByte);
Payload !.Add(retryAttemps);
Payload !.Add(bandIndex);
Payload !.Add(headerMacCmdCapacity);
}
public void TestDownstreamFrequency(Region region, Hertz inputFrequency, DataRateIndex inputDataRate, Hertz outputFreq, int?joinChannel = null)
{
var deviceJoinInfo = new DeviceJoinInfo(joinChannel);
Assert.True(region.TryGetDownstreamChannelFrequency(inputFrequency, inputDataRate, deviceJoinInfo, out var frequency));
Assert.Equal(frequency, outputFreq);
}
public LoRaADRResult ComputeResult(LoRaADRTable table, float requiredSnr, DataRateIndex upstreamDataRate, int minTxPower, DataRateIndex maxDr)
{
// We do not have enough frame to calculate ADR. We can assume that a crash was the cause.
if (table == null || table.Entries.Count < 20)
{
this.logger.LogDebug("ADR: not enough frames captured. Sending default power values");
return(null);
}
// This is the first contact case to harmonize the txpower state between device and server or the crash case.
if (!table.CurrentNbRep.HasValue || !table.CurrentTxPower.HasValue)
{
this.logger.LogDebug("ADR: Sending the device default power values");
return(null);
}
// This is a case of standard ADR calculus.
var newNbRep = ComputeNbRepetion(table.Entries[0].FCnt, table.Entries[LoRaADRTable.FrameCountCaptureCount - 1].FCnt, table.CurrentNbRep.GetValueOrDefault());
(var newTxPowerIndex, var newDatarate) = GetPowerAndDRConfiguration(requiredSnr, upstreamDataRate, table.Entries.Max(x => x.Snr), table.CurrentTxPower.GetValueOrDefault(), minTxPower, maxDr);
if (newNbRep != table.CurrentNbRep || newTxPowerIndex != table.CurrentTxPower || newDatarate != upstreamDataRate)
{
return(new LoRaADRResult()
{
DataRate = newDatarate,
NbRepetition = newNbRep,
TxPower = newTxPowerIndex
});
}
return(null);
}
public void TestRegionLimit(Region region, Hertz inputFrequency, DataRateIndex datarate, int?joinChannel = null)
{
var deviceJoinInfo = new DeviceJoinInfo(joinChannel);
var ex = Assert.Throws <LoRaProcessingException>(() => region.TryGetDownstreamChannelFrequency(inputFrequency, datarate, deviceJoinInfo, out _));
Assert.Equal(LoRaProcessingErrorCode.InvalidFrequency, ex.ErrorCode);
ex = Assert.Throws <LoRaProcessingException>(() => region.GetDownstreamDataRate(datarate));
Assert.Equal(LoRaProcessingErrorCode.InvalidDataRate, ex.ErrorCode);
}
private static LoRaADRResult ReturnDefaultValues(DataRateIndex upstreamDataRate, int defaultNbRep, int maxTxPowerIndex)
{
return(new LoRaADRResult
{
DataRate = upstreamDataRate,
NbRepetition = defaultNbRep,
TxPower = maxTxPowerIndex
});
}
public static RadioMetadata GenerateTestRadioMetadata(
DataRateIndex dataRate = DataRateIndex.DR2,
Hertz?frequency = null,
uint antennaPreference = 1,
ulong xtime = 100000,
uint gpstime = 100000,
double rssi = 2.0,
float snr = 0.1f) =>
new RadioMetadata(dataRate, frequency ?? Hertz.Mega(868.3),
new RadioMetadataUpInfo(antennaPreference, xtime, gpstime, rssi, snr));
public void TestIsDRIndexWithinAcceptableValues(Region region, DataRateIndex datarate, bool upstream, bool isValid)
{
if (upstream)
{
Assert.Equal(isValid, region.RegionLimits.IsCurrentUpstreamDRIndexWithinAcceptableValue(datarate));
}
else
{
Assert.Equal(isValid, region.RegionLimits.IsCurrentDownstreamDRIndexWithinAcceptableValue(datarate));
}
}
public void TestDownstreamRX2DataRate(Region region, DataRateIndex?nwksrvrx2dr, DataRateIndex?rx2drfromtwins, DataRateIndex expectedDr, int?reportedJoinChannel = null, int?desiredJoinChannel = null)
{
var deviceJoinInfo = new DeviceJoinInfo(reportedJoinChannel, desiredJoinChannel);
var datr = region.GetDownstreamRX2DataRate(nwksrvrx2dr, rx2drfromtwins, deviceJoinInfo, NullLogger.Instance);
Assert.Equal(expectedDr, datr);
}
public void TestMaxPayloadLength(Region region, DataRateIndex datarate, uint maxPyldSize)
{
Assert.Equal(region.GetMaxPayloadSize(datarate), maxPyldSize);
}
public async Task Perform_Rate_Adapatation_When_Possible(uint deviceId, int count, DataRateIndex expectedDR, int expectedTXPower, int expectedNbRep, uint initialDeviceFcntUp)
{
uint payloadFcnt = 0;
const uint InitialDeviceFcntDown = 0;
var simulatedDevice = new SimulatedDevice(
TestDeviceInfo.CreateABPDevice(deviceId, gatewayID: ServerConfiguration.GatewayID),
frmCntUp: initialDeviceFcntUp);
var loraDevice = CreateLoRaDevice(simulatedDevice);
LoRaDeviceClient.Setup(x => x.SendEventAsync(It.IsNotNull <LoRaDeviceTelemetry>(), null))
.ReturnsAsync(true);
LoRaDeviceClient.Setup(x => x.ReceiveAsync(It.IsNotNull <TimeSpan>()))
.ReturnsAsync((Message)null);
LoRaDeviceClient.Setup(x => x.UpdateReportedPropertiesAsync(It.IsNotNull <TwinCollection>(), It.IsAny <CancellationToken>()))
.ReturnsAsync(true);
using var cache = EmptyMemoryCache();
using var loraDeviceCache = CreateDeviceCache(loraDevice);
using var deviceRegistry = new LoRaDeviceRegistry(ServerConfiguration, cache, LoRaDeviceApi.Object, LoRaDeviceFactory, loraDeviceCache);
// Send to message processor
using var messageProcessor = new MessageDispatcher(
ServerConfiguration,
deviceRegistry,
FrameCounterUpdateStrategyProvider);
// In this case we want to simulate a cache failure, so we don't initialize the cache.
if (deviceId != 12)
{
payloadFcnt = await InitializeCacheToDefaultValuesAsync(payloadFcnt, simulatedDevice, messageProcessor);
}
else
{
var payloadInt = simulatedDevice.CreateConfirmedDataUpMessage("1234", fcnt: payloadFcnt);
using var requestInt = CreateWaitableRequest(TestUtils.GenerateTestRadioMetadata(), payloadInt);
messageProcessor.DispatchRequest(requestInt);
Assert.True(await requestInt.WaitCompleteAsync(-1));
payloadFcnt++;
}
for (var i = 0; i < count; i++)
{
var payloadInt = simulatedDevice.CreateUnconfirmedDataUpMessage("1234", fcnt: payloadFcnt, fctrlFlags: FrameControlFlags.Adr);
using var requestInt = CreateWaitableRequest(TestUtils.GenerateTestRadioMetadata(), payloadInt);
messageProcessor.DispatchRequest(requestInt);
Assert.True(await requestInt.WaitCompleteAsync(-1));
payloadFcnt++;
}
var payload = simulatedDevice.CreateUnconfirmedDataUpMessage("1234", fcnt: payloadFcnt, fctrlFlags: FrameControlFlags.AdrAckReq | FrameControlFlags.Adr);
using var request = CreateWaitableRequest(TestUtils.GenerateTestRadioMetadata(), payload);
messageProcessor.DispatchRequest(request);
Assert.True(await request.WaitCompleteAsync());
// Expectations
// 1. Message was sent to IoT Hub
LoRaDeviceClient.VerifyAll();
LoRaDeviceApi.VerifyAll();
Assert.NotNull(request.ResponseDownlink);
Assert.True(request.ProcessingSucceeded);
Assert.Equal(2, DownstreamMessageSender.DownlinkMessages.Count);
var downlinkMessage = DownstreamMessageSender.DownlinkMessages[1];
var payloadDataDown = new LoRaPayloadData(downlinkMessage.Data);
// in this case we expect a null payload
if (deviceId == 11)
{
Assert.Equal(0, payloadDataDown.Frmpayload.Span.Length);
}
else
{
// We expect a mac command in the payload
Assert.Equal(5, payloadDataDown.Frmpayload.Span.Length);
var decryptedPayload = payloadDataDown.Serialize(simulatedDevice.NwkSKey.Value);
Assert.Equal(FramePort.MacCommand, payloadDataDown.Fport);
Assert.Equal((byte)Cid.LinkADRCmd, decryptedPayload[0]);
var linkAdr = new LinkADRRequest(decryptedPayload);
Assert.Equal(expectedDR, linkAdr.DataRate);
Assert.Equal(expectedDR, loraDevice.DataRate);
Assert.Equal(expectedTXPower, linkAdr.TxPower);
Assert.Equal(expectedTXPower, loraDevice.TxPower);
Assert.Equal(expectedNbRep, linkAdr.NbRep);
Assert.Equal(expectedNbRep, loraDevice.NbRep);
}
// in case no payload the mac is in the FRMPayload and is decrypted with NwkSKey
Assert.Equal(payloadDataDown.DevAddr, loraDevice.DevAddr);
Assert.False(payloadDataDown.IsConfirmed);
Assert.Equal(MacMessageType.UnconfirmedDataDown, payloadDataDown.MessageType);
// 4. Frame counter up was updated
Assert.Equal(payloadFcnt, loraDevice.FCntUp);
// 5. Frame counter down is updated
Assert.Equal(InitialDeviceFcntDown + 1, loraDevice.FCntDown);
Assert.Equal(InitialDeviceFcntDown + 1, payloadDataDown.Fcnt);
}
public void GetDownstreamDataRate_ThrowsWhenOffsetInvalid(Region region, DataRateIndex inputDataRate, int rx1DrOffset)
{
var ex = Assert.Throws <LoRaProcessingException>(() => region.GetDownstreamDataRate(inputDataRate, rx1DrOffset));
Assert.Equal(LoRaProcessingErrorCode.InvalidDataRateOffset, ex.ErrorCode);
}
public void TestDownstreamDataRate(Region region, DataRateIndex inputDataRate, DataRateIndex outputDr, int rx1DrOffset = 0)
{
Assert.Equal(region.GetDownstreamDataRate(inputDataRate, rx1DrOffset), outputDr);
}
public override Task <LoRaADRResult> CalculateADRResultAndAddEntryAsync(DevEui devEUI, string gatewayId, uint fCntUp, uint fCntDown, float requiredSnr, DataRateIndex dataRate, int minTxPower, DataRateIndex maxDr, LoRaADRTableEntry newEntry = null)
{
return(Task.FromResult <LoRaADRResult>(null));
}
public async Task Perform_DR_Adaptation_When_Needed(uint deviceId, float currentLsnr, string currentDRString, DataRateIndex expectedDR, int expectedTxPower)
{
var currentDR = LoRaDataRate.Parse(currentDRString);
var messageCount = 21;
uint payloadFcnt = 0;
const uint InitialDeviceFcntUp = 9;
const uint ExpectedDeviceFcntDown = 0;
var simulatedDevice = new SimulatedDevice(
TestDeviceInfo.CreateABPDevice(deviceId, gatewayID: ServerConfiguration.GatewayID),
frmCntUp: InitialDeviceFcntUp);
var loraDevice = CreateLoRaDevice(simulatedDevice);
LoRaDeviceClient.Setup(x => x.SendEventAsync(It.IsNotNull <LoRaDeviceTelemetry>(), null))
.ReturnsAsync(true);
LoRaDeviceClient.Setup(x => x.ReceiveAsync(It.IsNotNull <TimeSpan>()))
.ReturnsAsync((Message)null);
var twinDR = DR0;
var twinTxPower = 0;
LoRaDeviceClient.Setup(x => x.UpdateReportedPropertiesAsync(It.IsNotNull <TwinCollection>(), It.IsAny <CancellationToken>()))
.Callback <TwinCollection, CancellationToken>((t, _) =>
{
if (t.Contains(TwinProperty.DataRate))
{
twinDR = t[TwinProperty.DataRate];
}
if (t.Contains(TwinProperty.TxPower))
{
twinTxPower = (int)t[TwinProperty.TxPower];
}
})
.ReturnsAsync(true);
using var cache = EmptyMemoryCache();
using var loraDeviceCache = CreateDeviceCache(loraDevice);
using var deviceRegistry = new LoRaDeviceRegistry(ServerConfiguration, cache, LoRaDeviceApi.Object, LoRaDeviceFactory, loraDeviceCache);
// Send to message processor
using var messageProcessor = new MessageDispatcher(
ServerConfiguration,
deviceRegistry,
FrameCounterUpdateStrategyProvider);
payloadFcnt = await InitializeCacheToDefaultValuesAsync(payloadFcnt, simulatedDevice, messageProcessor);
for (var i = 0; i < messageCount; i++)
{
payloadFcnt = await SendMessage(currentLsnr, currentDR, payloadFcnt, simulatedDevice, messageProcessor, FrameControlFlags.Adr);
}
var payload = simulatedDevice.CreateUnconfirmedDataUpMessage("1234", fcnt: payloadFcnt, fctrlFlags: FrameControlFlags.AdrAckReq | FrameControlFlags.Adr);
var radioMetadata = new RadioMetadata(TestUtils.TestRegion.GetDataRateIndex(currentDR), Hertz.Mega(868.1), new RadioMetadataUpInfo(0, 0, 0, 0, currentLsnr));
using var request = CreateWaitableRequest(radioMetadata, payload);
messageProcessor.DispatchRequest(request);
Assert.True(await request.WaitCompleteAsync());
// Expectations
// 1. Message was sent to IoT Hub
LoRaDeviceClient.VerifyAll();
LoRaDeviceApi.VerifyAll();
Assert.True(request.ProcessingSucceeded);
Assert.NotNull(request.ResponseDownlink);
var downlinkMessage = DownstreamMessageSender.DownlinkMessages[1];
var payloadDataDown = new LoRaPayloadData(downlinkMessage.Data);
// We expect a mac command in the payload
if (deviceId == 221)
{
// In this case, no ADR adaptation is performed, so the message should be empty
Assert.Equal(0, payloadDataDown.Frmpayload.Span.Length);
Assert.Equal(0, payloadDataDown.Fopts.Span.Length);
}
else
{
Assert.Equal(5, payloadDataDown.Frmpayload.Span.Length);
var decryptedPayload = payloadDataDown.Serialize(simulatedDevice.NwkSKey.Value);
Assert.Equal(FramePort.MacCommand, payloadDataDown.Fport);
Assert.Equal((byte)Cid.LinkADRCmd, decryptedPayload[0]);
var linkAdr = new LinkADRRequest(decryptedPayload);
Assert.Equal(expectedDR, linkAdr.DataRate);
Assert.Equal(expectedDR, loraDevice.DataRate);
Assert.Equal(expectedDR, twinDR);
Assert.Equal(expectedTxPower, linkAdr.TxPower);
Assert.Equal(expectedTxPower, loraDevice.TxPower);
Assert.Equal(expectedTxPower, twinTxPower);
// in case no payload the mac is in the FRMPayload and is decrypted with NwkSKey
Assert.Equal(payloadDataDown.DevAddr, loraDevice.DevAddr);
Assert.False(payloadDataDown.IsConfirmed);
Assert.Equal(MacMessageType.UnconfirmedDataDown, payloadDataDown.MessageType);
// 4. Frame counter up was updated
Assert.Equal(payloadFcnt, loraDevice.FCntUp);
// 5. Frame counter down is updated
Assert.Equal(ExpectedDeviceFcntDown + 1, loraDevice.FCntDown);
Assert.Equal(ExpectedDeviceFcntDown + 1, payloadDataDown.Fcnt);
}
}
public async Task When_Getting_DLSettings_From_Twin_Returns_JoinAccept_With_Correct_Settings(int rx1DROffset, DataRateIndex rx2datarate)
{
var deviceGatewayID = ServerGatewayID;
var simulatedDevice = new SimulatedDevice(TestDeviceInfo.CreateOTAADevice(1, gatewayID: deviceGatewayID));
var joinRequest = simulatedDevice.CreateJoinRequest();
var devAddr = (DevAddr?)null;
var devEui = simulatedDevice.LoRaDevice.DevEui;
// Device twin will be queried
var twin = new Twin();
twin.Properties.Desired[TwinProperty.DevEUI] = devEui.ToString();
twin.Properties.Desired[TwinProperty.AppEui] = simulatedDevice.LoRaDevice.AppEui?.ToString();
twin.Properties.Desired[TwinProperty.AppKey] = simulatedDevice.LoRaDevice.AppKey?.ToString();
twin.Properties.Desired[TwinProperty.GatewayID] = deviceGatewayID;
twin.Properties.Desired[TwinProperty.SensorDecoder] = simulatedDevice.LoRaDevice.SensorDecoder;
twin.Properties.Desired[TwinProperty.RX1DROffset] = rx1DROffset;
twin.Properties.Desired[TwinProperty.RX2DataRate] = rx2datarate;
LoRaDeviceClient.Setup(x => x.GetTwinAsync(CancellationToken.None)).ReturnsAsync(twin);
LoRaDeviceClient.Setup(x => x.UpdateReportedPropertiesAsync(It.IsNotNull <TwinCollection>(), It.IsAny <CancellationToken>()))
.ReturnsAsync(true);
// Lora device api will be search by devices with matching deveui,
LoRaDeviceApi.Setup(x => x.SearchAndLockForJoinAsync(ServerConfiguration.GatewayID, devEui, joinRequest.DevNonce))
.ReturnsAsync(new SearchDevicesResult(new IoTHubDeviceInfo(devAddr, devEui, "aabb").AsList()));
using var memoryCache = new MemoryCache(new MemoryCacheOptions());
using var deviceRegistry = new LoRaDeviceRegistry(ServerConfiguration, memoryCache, LoRaDeviceApi.Object, LoRaDeviceFactory, DeviceCache);
// Send to message processor
using var messageProcessor = new MessageDispatcher(
ServerConfiguration,
deviceRegistry,
FrameCounterUpdateStrategyProvider);
using var request = CreateWaitableRequest(TestUtils.GenerateTestRadioMetadata(), joinRequest);
messageProcessor.DispatchRequest(request);
Assert.True(await request.WaitCompleteAsync());
Assert.NotNull(request.ResponseDownlink);
Assert.Single(DownstreamMessageSender.DownlinkMessages);
var downlinkMessage = DownstreamMessageSender.DownlinkMessages[0];
var joinAccept = new LoRaPayloadJoinAccept(downlinkMessage.Data, simulatedDevice.LoRaDevice.AppKey.Value);
Assert.Equal(rx1DROffset, joinAccept.Rx1DrOffset);
Assert.Equal(rx2datarate, joinAccept.Rx2Dr);
}
public override bool TryGetDownstreamChannelFrequency(Hertz upstreamFrequency, DataRateIndex upstreamDataRate, DeviceJoinInfo deviceJoinInfo, out Hertz downstreamFrequency) => throw new NotImplementedException();
private static (int txPower, DataRateIndex datarate) GetPowerAndDRConfiguration(float requiredSnr, DataRateIndex dataRate, double maxSnr, int currentTxPowerIndex, int minTxPowerIndex, DataRateIndex maxDr)
{
var snrMargin = maxSnr - requiredSnr - MarginDb;
var computedDataRate = dataRate;
var nStep = (int)snrMargin;
while (nStep != 0)
{
if (nStep > 0)
{
if (computedDataRate < maxDr)
{
computedDataRate++;
}
// txpower is an inverted scale, hence if we want to reduce
else if (currentTxPowerIndex < minTxPowerIndex)
{
currentTxPowerIndex++;
}
nStep--;
if (currentTxPowerIndex >= minTxPowerIndex)
{
return(minTxPowerIndex, computedDataRate);
}
}
else if (nStep < 0)
{
if (currentTxPowerIndex > MaxTxPowerIndex)
{
currentTxPowerIndex--;
nStep++;
}
else
{
return(currentTxPowerIndex, computedDataRate);
}
}
}
return(currentTxPowerIndex, computedDataRate);
}
public async Task When_Getting_Custom_RX2_DR_From_Twin_Returns_JoinAccept_With_Correct_Settings_And_Behaves_Correctly(DataRateIndex rx2datarate)
{
var deviceGatewayID = ServerGatewayID;
var simulatedDevice = new SimulatedDevice(TestDeviceInfo.CreateOTAADevice(1, gatewayID: deviceGatewayID));
var joinRequest = simulatedDevice.CreateJoinRequest();
AppSessionKey? afterJoinAppSKey = null;
NetworkSessionKey?afterJoinNwkSKey = null;
string afterJoinDevAddr = null;
var afterJoinFcntDown = -1;
var afterJoinFcntUp = -1;
uint startingPayloadFcnt = 0;
var devAddr = (DevAddr?)null;
var devEui = simulatedDevice.LoRaDevice.DevEui;
// message will be sent
var sentTelemetry = new List <LoRaDeviceTelemetry>();
LoRaDeviceClient.Setup(x => x.SendEventAsync(It.IsNotNull <LoRaDeviceTelemetry>(), null))
.Callback <LoRaDeviceTelemetry, Dictionary <string, string> >((t, _) => sentTelemetry.Add(t))
.ReturnsAsync(true);
// C2D message will be checked
LoRaDeviceClient.Setup(x => x.ReceiveAsync(It.IsNotNull <TimeSpan>()))
.ReturnsAsync((Message)null);
// Device twin will be queried
var twin = new Twin();
twin.Properties.Desired[TwinProperty.DevEUI] = devEui.ToString();
twin.Properties.Desired[TwinProperty.AppEui] = simulatedDevice.LoRaDevice.AppEui?.ToString();
twin.Properties.Desired[TwinProperty.AppKey] = simulatedDevice.LoRaDevice.AppKey?.ToString();
twin.Properties.Desired[TwinProperty.GatewayID] = deviceGatewayID;
twin.Properties.Desired[TwinProperty.SensorDecoder] = simulatedDevice.LoRaDevice.SensorDecoder;
twin.Properties.Desired[TwinProperty.RX2DataRate] = rx2datarate;
twin.Properties.Desired[TwinProperty.PreferredWindow] = 2;
LoRaDeviceClient.Setup(x => x.GetTwinAsync(CancellationToken.None)).ReturnsAsync(twin);
LoRaDeviceClient.Setup(x => x.UpdateReportedPropertiesAsync(It.IsNotNull <TwinCollection>(), It.IsAny <CancellationToken>()))
.Callback <TwinCollection, CancellationToken>((updatedTwin, _) =>
{
afterJoinAppSKey = AppSessionKey.Parse(updatedTwin[TwinProperty.AppSKey].Value);
afterJoinNwkSKey = NetworkSessionKey.Parse(updatedTwin[TwinProperty.NwkSKey].Value);
afterJoinDevAddr = updatedTwin[TwinProperty.DevAddr].Value;
afterJoinFcntDown = updatedTwin[TwinProperty.FCntDown].Value;
afterJoinFcntUp = updatedTwin[TwinProperty.FCntUp].Value;
})
.ReturnsAsync(true);
// Lora device api will be search by devices with matching deveui,
LoRaDeviceApi.Setup(x => x.SearchAndLockForJoinAsync(ServerConfiguration.GatewayID, devEui, joinRequest.DevNonce))
.ReturnsAsync(new SearchDevicesResult(new IoTHubDeviceInfo(devAddr, devEui, "aabb").AsList()));
using var memoryCache = new MemoryCache(new MemoryCacheOptions());
using var deviceRegistry = new LoRaDeviceRegistry(ServerConfiguration, memoryCache, LoRaDeviceApi.Object, LoRaDeviceFactory, DeviceCache);
// Send to message processor
using var messageProcessor = new MessageDispatcher(
ServerConfiguration,
deviceRegistry,
FrameCounterUpdateStrategyProvider);
using var request = CreateWaitableRequest(TestUtils.GenerateTestRadioMetadata(), joinRequest);
messageProcessor.DispatchRequest(request);
Assert.True(await request.WaitCompleteAsync());
Assert.NotNull(request.ResponseDownlink);
Assert.Single(DownstreamMessageSender.DownlinkMessages);
var downlinkMessage = DownstreamMessageSender.DownlinkMessages[0];
var joinAccept = new LoRaPayloadJoinAccept(downlinkMessage.Data, simulatedDevice.LoRaDevice.AppKey.Value);
if (rx2datarate is > DR0 and < DR8)
{
Assert.Equal(rx2datarate, joinAccept.Rx2Dr);
}
public void MemberValue(int expected, DataRateIndex input)
{
Assert.Equal(expected, (int)input);
}
public virtual async Task <LoRaADRResult> CalculateADRResultAndAddEntryAsync(DevEui devEUI, string gatewayId, uint fCntUp, uint fCntDown, float requiredSnr, DataRateIndex dataRate, int minTxPower, DataRateIndex maxDr, LoRaADRTableEntry newEntry = null)
{
var table = newEntry != null
? await this.store.AddTableEntry(newEntry)
: await this.store.GetADRTable(devEUI);
var currentStrategy = this.strategyProvider.GetStrategy();
var result = currentStrategy.ComputeResult(table, requiredSnr, dataRate, minTxPower, maxDr);
if (result == null)
{
// In this case we want to reset the device to default values as we have null values
if (table == null ||
!table.CurrentNbRep.HasValue ||
!table.CurrentTxPower.HasValue ||
fCntUp > currentStrategy.MinimumNumberOfResult)
{
result = ReturnDefaultValues(dataRate, currentStrategy.DefaultNbRep, currentStrategy.DefaultTxPower);
}
else
{
result = await GetLastResultAsync(devEUI) ?? new LoRaADRResult();
result.NumberOfFrames = table.Entries.Count;
return(result);
}
}
var nextFcntDown = await NextFCntDown(devEUI, gatewayId, fCntUp, fCntDown);
result.CanConfirmToDevice = nextFcntDown > 0;
if (result.CanConfirmToDevice)
{
if (table == null)
{
// in a reset case, we may not have a table, but still want to store the default
// values that we sent to the client
table = new LoRaADRTable();
}
table.CurrentNbRep = result.NbRepetition;
table.CurrentTxPower = result.TxPower;
await this.store.UpdateADRTable(devEUI, table);
UpdateState(result);
result.FCntDown = nextFcntDown;
}
result.NumberOfFrames = table.Entries.Count;
this.logger.LogDebug($"calculated ADR: CanConfirmToDevice: {result.CanConfirmToDevice}, TxPower: {result.TxPower}, DataRate: {result.DataRate}");
return(result);
}
