private void timer1_Tick(object sender, EventArgs e)//定时器
{
CTran.CommTimerCall();
if (bRefresh())
{
this.Invalidate();
}
if (DI076.GetBoolValue())
{
button141.Enabled = true;
button142.Enabled = false;
}
else
{
button141.Enabled = false;
if (SPLC.System[0] == 7)
{
button142.Enabled = false;//配方运行是水冷套下不能点击
}
else
{
button142.Enabled = true;
}
}
if (SPLC.System[0] == 18)
{
button018.Enabled = false;
}
else
{
button018.Enabled = true;
}
if (SPLC.System[0] == 7)
{
button074.Enabled = false;
}
else
{
button074.Enabled = true;
}
if (DI074.GetBoolValue())
{
button074.BackColor = Color.LimeGreen;
button074.Text = "生长室门阀关闭";
}
else if (DI075.GetBoolValue())
{
button074.BackColor = Color.Red;
button074.Text = "生长室门阀开启";
}
else
{
button074.BackColor = Color.Gray;
button074.Text = "生长室门阀";
}
if (DI110.GetBoolValue())
{
button110.BackColor = Color.LimeGreen;
button110.Text = "进样室门阀关闭";
}
else if (DI111.GetBoolValue())
{
button110.BackColor = Color.Red;
button110.Text = "进样室门阀开启";
}
else
{
button110.BackColor = Color.Gray;
button110.Text = "进样室门阀";
}
this.Invalidate();
//Rectangle rc = new Rectangle(new Point(158, 13), new Size(203, 93));
//this.Invalidate(rc,true);
}
private void buttonSend1002(object sender, EventArgs e)//下发程序控制
{
Button nCon = (Button)sender;
switch (nCon.Name)
{
case "button074":
if (DI074.GetBoolValue())
{
if (bMsgBoxShowYN("是否进行生长室门阀关闭程序？", "关闭"))
{
SPLC.SendAODO("1002", 12, "SY"); //12：生长室门阀关闭
}
}
else if (DI075.GetBoolValue())
{
if (SPLC.System[0] == 7)
{
return;
}
if (bMsgBoxShowYN("是否进行生长室门阀开启程序？", "开启"))
{
SPLC.SendAODO("1002", 11, "SY"); //11:生长室门阀开启
}
}
break;
case "button110": //进样室门阀
if (DI110.GetBoolValue())
{
if (bMsgBoxShowYN("是否进行进样室门阀关闭程序？", "关闭"))
{
if (SPLC.System[0] == 7)
{
SPLC.SendAODO("1046", 17, "SY"); //17：进样室门阀关闭
}
else
{
SPLC.SendAODO("1002", 17, "SY"); //17：进样室门阀关闭
}
}
}
else if (DI111.GetBoolValue())
{
if (bMsgBoxShowYN("是否进行进样室门阀开启程序？", "开启"))
{
if (SPLC.System[0] == 7)
{
SPLC.SendAODO("1046", 16, "SY"); //16：进样室门阀开启
}
else
{
SPLC.SendAODO("1002", 16, "SY"); //16：进样室门阀开启
}
}
}
break;
case "button018":
if (bMsgBoxShowYN("是否进行进样室吹扫程序？", "吹扫"))
{
SPLC.SendAODO("1002", 18, "SY"); //18：进样室吹扫
}
break;
case "button147":
if (bMsgBoxShowYN("是否打开进样室抽气门阀？", "抽气"))
{
SPLC.SendAODO("AV147", 0, "DO");
}
break;
case "button145":
if (bMsgBoxShowYN("是否打开进样室充气门阀？", "充气"))
{
SPLC.SendAODO("AV145", 0, "DO");
}
break;
case "button141":
if (bMsgBoxShowYN("是否关闭水冷套？", "关闭"))
{
SPLC.SendAODO("AV141", 1, "DO2");
SPLC.SendAODO("AV142", 0, "DO2");
}
break;
case "button142":
if (bMsgBoxShowYN("是否开启水冷套？", "开启"))
{
SPLC.SendAODO("AV141", 0, "DO2");
SPLC.SendAODO("AV142", 1, "DO2");
}
break;
}
}
private void DrawRing(Graphics g)//画阀门和进样室上下位
{
RectangleF rect1 = new RectangleF(CMach.PFCenter.X - 147, CMach.PFCenter.Y - 70, 14, 140);
RectangleF rect2 = new RectangleF(CMach.PFCenter.X + 117, CMach.PFCenter.Y - 70, 14, 140);
if (DI074.GetBoolValue())
{
g.FillRectangle(Brushes.Lime, rect1);
}
else if (DI075.GetBoolValue())
{
g.FillRectangle(Brushes.Red, rect1);
}
else
{
g.FillRectangle(Brushes.Gray, rect1);
}
if (DI110.GetBoolValue())
{
g.FillRectangle(Brushes.Lime, rect2);
}
else if (DI111.GetBoolValue())
{
g.FillRectangle(Brushes.Red, rect2);
}
else
{
g.FillRectangle(Brushes.Gray, rect2);
}
Single iL = 300;
Single iH = 40;
Single iW = 30;
RectangleF rect3 = new RectangleF(CMach.PFCenter.X - iH, CMach.PFCenter.Y - iL - iW, iH / 2, iW * 2);
RectangleF rect4 = new RectangleF(CMach.PFCenter.X + iH / 2, CMach.PFCenter.Y - iL - iW, iH / 2, iW * 2);
bool B2 = false;
bool B3 = false;
SolidBrush FontBrush = new SolidBrush(System.Drawing.Color.DeepSkyBlue);
FontBrush.Color = Color.White;
StringFormat format1 = new StringFormat(StringFormatFlags.LineLimit);
format1.Alignment = StringAlignment.Center;
format1.LineAlignment = StringAlignment.Center;
for (int i = 0; i < CMach.TuoPanNum; i++)
{
if (CMach.TuoPan[i] == 2)//进样室高位
{
B2 = true;
}
else if (CMach.TuoPan[i] == 3)//进样室高位
{
B3 = true;
}
}
if (B2)//进样室高位
{
g.FillRectangle(Brushes.Red, rect3);
g.DrawString("上", new Font("宋体", 16, GraphicsUnit.World), FontBrush, rect3, format1);
}
else
{
g.FillRectangle(Brushes.Gray, rect3);
g.DrawString("上", new Font("宋体", 16, GraphicsUnit.World), FontBrush, rect3, format1);
}
if (B3)//进样室高位
{
g.FillRectangle(Brushes.Red, rect4);
g.DrawString("下", new Font("宋体", 16, GraphicsUnit.World), FontBrush, rect4, format1);
}
else
{
g.FillRectangle(Brushes.Gray, rect4);
g.DrawString("下", new Font("宋体", 16, GraphicsUnit.World), FontBrush, rect4, format1);
}
}
