public CutLine GetNearestLine(Vector3 fromPosition)
{
bool lineFound = false;
int nearestLineIndex = -1;
float smallestDistance = 0.0f;
if (WoodToCut == null)
{
Debug.Log(WoodToCut);
}
if (WoodToCut[currentPieceIndex] == null)
{
Debug.Log(WoodToCut[currentPieceIndex]);
}
if (WoodToCut[currentPieceIndex].GetComponent <WoodMaterialObject>() == null)
{
Debug.Log(WoodToCut[currentPieceIndex].GetComponent <WoodMaterialObject>());
}
if (WoodToCut[currentPieceIndex].GetComponent <WoodMaterialObject>() == null)
{
Debug.Log(WoodToCut[currentPieceIndex].GetComponent <WoodMaterialObject>().LinesToCut);
}
if (WoodToCut[currentPieceIndex].GetComponent <WoodMaterialObject>().LinesToCut == null)
{
Debug.Log(WoodToCut[currentPieceIndex].GetComponent <WoodMaterialObject>().LinesToCut);
}
List <CutLine> lines = WoodToCut[currentPieceIndex].GetComponent <WoodMaterialObject>().LinesToCut;
for (int i = 0; i < lines.Count && !lineFound; i++)
{
CutLine currentLine = lines[i];
if (currentLine != null)
{
if (currentLine.CutType == CutLineType.CurvatureCut)
{
float firstDistance = Vector3.Distance(fromPosition, currentLine.Checkpoints[0].GetPosition());
float lastDistance = Vector3.Distance(fromPosition, currentLine.Checkpoints[currentLine.Checkpoints.Count - 1].GetPosition());
if (nearestLineIndex == -1 || firstDistance < smallestDistance || lastDistance < smallestDistance)
{
if (nearestLineIndex == -1)
{
smallestDistance = (firstDistance < lastDistance) ? firstDistance : lastDistance;
}
else
{
smallestDistance = (firstDistance < smallestDistance) ? firstDistance : smallestDistance;
smallestDistance = (lastDistance < smallestDistance) ? lastDistance : smallestDistance;
}
nearestLineIndex = i;
}
}
}
}
return(lines[nearestLineIndex]);
}
void OnDisable()
{
if (currentLine != null)
{
currentLine.DisplayLine(false, true);
currentLine = null;
}
CurrentState = CutState.ReadyToCut;
SawBlade.ResetEdgePosition();
}
public void SplitMaterial(CutLine lineToRemove)
{
WoodToCut[currentPieceIndex].transform.rotation = Quaternion.identity;
WoodMaterialObject woodBoard = WoodToCut[currentPieceIndex].GetComponent <WoodMaterialObject>();
LinesToCut.Remove(lineToRemove);
List <GameObject> pieces = WoodManagerHelper.SplitBoard(lineToRemove.GetFirstBaseNode(),
lineToRemove.GetSecondBaseNode(),
woodBoard, lineToRemove);
if (LinesToCut.Count > 0)
{
foreach (GameObject piece in pieces)
{
if (piece.tag == "Piece")
{
WoodToCut.RemoveAt(currentPieceIndex);
Destroy(piece);
NextPiece();
}
else if (piece.tag == "Leftover")
{
}
else
{
Rigidbody physics = piece.GetComponent <Rigidbody>();
if (physics == null)
{
physics = piece.AddComponent <Rigidbody>();
}
physics.useGravity = true;
BandSawPieceController controller = piece.AddComponent <BandSawPieceController>();
controller.Moveable = true;
WoodToCut[currentPieceIndex] = piece;
PlacePiece();
}
}
}
else
{
UI_Manager.InfoPanel.SetActive(true);
UI_Manager.InfoText.text = "All of the lines are cut. \nOn to the next step.";
UI_Manager.HideButton.gameObject.SetActive(false);
UI_Manager.StartOverButton.gameObject.SetActive(false);
UI_Manager.NextSceneButton.gameObject.SetActive(true);
StillCutting = false;
float percentage = cumulativeLineScore / numberOfCuts;
Debug.Log(percentage);
if (GameManager.instance != null)
{
GameManager.instance.scoreTracker.ApplyScore(percentage);
}
}
}
private void SwitchLine()
{
CutLine nearestLine = manager.GetNearestLine(Blade.transform.position);
nearestLine.ChangeColor(SelectedLineColor);
if (currentLine != null && currentLine != nearestLine)
{
currentLine.ResetColor(NotSelectedLineColor);
}
currentLine = nearestLine;
}
public void LeaveMark(Gesture gesture)
{
if (gesture.pickedObject != null && CanMeasure && gesture.touchCount == 1)
{
if ((gesture.pickedObject.tag == "Piece" || gesture.pickedObject.tag == "Leftover") && SecondPointIsOnWoodMaterial(gesture.position))
{
LineMark markedLine = currentLineRenderer.gameObject.AddComponent <LineMark>();
CutLine nearestLine = manager.GetNearestLine(currentLineRenderer.gameObject.transform.position);
Vector3 markedPosition = currentLineRenderer.gameObject.transform.position;
if (nearestLine.IsMarked)
{
GameObject previousLine = nearestLine.LineMark;
nearestLine.LineMark = null;
Destroy(previousLine);
}
if (MarkIsNearLine(nearestLine, markedPosition))
{
markedLine.GoodLineMark = true;
nearestLine.IsMarked = true;
currentLineRenderer.material.color = GoodLineColor;
}
else
{
markedLine.GoodLineMark = false;
nearestLine.IsMarked = true;
currentLineRenderer.material.color = BadLineColor;
}
nearestLine.LineMark = currentLineRenderer.gameObject;
markedLine.StartPoint = currentLineRenderer.gameObject.transform;
GameObject secondPoint = new GameObject();
secondPoint.transform.position = SecondPosition;
secondPoint.transform.parent = currentLineMark.transform;
markedLine.EndPoint = secondPoint.transform;
markedLine.line = currentLineRenderer;
}
else
{
if (currentLineRenderer != null)
{
Destroy(currentLineRenderer.material);
Destroy(currentLineRenderer.gameObject);
}
}
}
else
{
if (currentLineRenderer != null)
{
Destroy(currentLineRenderer.material);
Destroy(currentLineRenderer.gameObject);
}
}
}
private void SwitchLine()
{
CutLine nearestLine = manager.GetNearestLine(SawBlade.transform.position);
if (nearestLine.IsMarked && nearestLine.LineMark != null)
{
if (nearestLine.LineMark.GetComponent <LineMark>().GoodLineMark)
{
nearestLine.DisplayLine(true, true);
}
}
if (currentLine != null && currentLine != nearestLine)
{
currentLine.DisplayLine(false, true);
}
currentLine = nearestLine;
}
public bool MarkIsNearLine(CutLine line, Vector3 markPosition)
{
bool closeToLine = false;
if (line.CutType == CutLineType.TableSawCut)
{
float distanceToLine = line.CalculateDistance(markPosition);
closeToLine = (distanceToLine < OffsetFromLine);
}
else if (line.CutType == CutLineType.ChopSawCut)
{
Vector3 linePosition = line.Checkpoints[0].GetPosition();
Vector3 adjustedMarkedPosition = new Vector3(markPosition.x, linePosition.y, markPosition.z);
Vector3 toAdjustedMark = adjustedMarkedPosition - linePosition;
Vector3 rightOfLine = (linePosition + line.Checkpoints[0].transform.forward) - linePosition;
float projectionOntoLine = Vector3.Dot(toAdjustedMark, rightOfLine);
closeToLine = (Mathf.Abs(projectionOntoLine) < OffsetFromLine);
}
return(closeToLine);
}
public void SplitMaterial(CutLine lineToRemove)
{
WoodMaterialObject board = AvailableWoodMaterial[currentPieceIndex].GetComponent <WoodMaterialObject>();
BoardController previousBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
LinesToCut.Remove(lineToRemove);
AvailableWoodMaterial.RemoveAt(currentPieceIndex);
List <GameObject> pieces = WoodManagerHelper.SplitBoard(lineToRemove.GetFirstBaseNode(),
lineToRemove.GetSecondBaseNode(),
board, lineToRemove);
bool pieceAdded = false;
foreach (GameObject piece in pieces)
{
WoodMaterialObject boardPiece = piece.GetComponent <WoodMaterialObject>();
if (boardPiece != null)
{
bool lineFound = false;
for (int i = 0; i < LinesToCut.Count && !lineFound; i++)
{
lineFound = boardPiece.ContainsLine(LinesToCut[i]);
}
if (lineFound)
{
BoardController controller = piece.AddComponent <BoardController>();
controller.Moveable = true;
controller.WoodObject = boardPiece;
controller.MaxLimit_X = previousBoardController.MaxLimit_X;
controller.MaxLimit_Z = previousBoardController.MaxLimit_Z;
controller.MinLimit_X = previousBoardController.MinLimit_X;
controller.MinLimit_Z = previousBoardController.MinLimit_Z;
AvailableWoodMaterial.Add(piece);
if (!pieceAdded)
{
pieceAdded = true;
int index = AvailableWoodMaterial.IndexOf(piece);
currentPieceIndex = index;
AvailableWoodMaterial[currentPieceIndex].SetActive(true);
currentBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
}
else
{
piece.SetActive(false);
piece.transform.position = Vector3.zero;
piece.transform.rotation = Quaternion.identity;
}
}
else
{
Destroy(piece);
}
}
else
{
Destroy(piece);
}
if (!pieceAdded && AvailableWoodMaterial.Count > 0)
{
currentPieceIndex = 0;
AvailableWoodMaterial[currentPieceIndex].SetActive(true);
currentBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
SetupForCutting();
EnableCurrentBoardMovement(true);
RestrictCurrentBoardMovement(false, false);
AvailableWoodMaterial[currentPieceIndex].transform.position = currentSpawnPoint.position + new Vector3(0.0f, 0.0f, -1.0f);
Vector3 directionToPiece = (AvailableWoodMaterial[currentPieceIndex].transform.position - currentSpawnPoint.position).normalized;
Ray ray = new Ray(currentSpawnPoint.position, directionToPiece);
RaycastHit hit;
if (Physics.Raycast(ray, out hit, Mathf.Infinity))
{
float distance = (hit.point - currentSpawnPoint.position).magnitude;
AvailableWoodMaterial[currentPieceIndex].transform.position += (distance * -directionToPiece);
}
}
SawBlade.TurnOff();
UI_Manager.ChangeSawButtons(false);
}
if (LinesToCut.Count > 0)
{
UI_Manager.UpdateSelectionButtons(currentPieceIndex, AvailableWoodMaterial.Count);
}
else
{
UI_Manager.InfoPanel.SetActive(true);
UI_Manager.InfoText.text = "All of the lines are cut. \nOn to the next step.";
UI_Manager.HideButton.gameObject.SetActive(false);
UI_Manager.StartOverButton.gameObject.SetActive(false);
UI_Manager.NextSceneButton.gameObject.SetActive(true);
StillCutting = false;
float percentage = cumulativeLineScore / numberOfCuts;
if (GameManager.instance != null)
{
GameManager.instance.ApplyScore(percentage);
}
else
{
Debug.Log("Score Applied: " + percentage);
}
}
}
public static List <GameObject> SplitBoard(Node baseNode, Node baseNode2, WoodMaterialObject boardToSplit, CutLine detachedLine)
{
WoodManagerHelper.RemoveCutLine(boardToSplit, detachedLine);
List <GameObject> splitPieces = new List <GameObject>();
splitPieces.Add(WoodManagerHelper.DeterminePiece(baseNode, ref boardToSplit));
splitPieces.Add(WoodManagerHelper.DeterminePiece(baseNode2, ref boardToSplit));
Destroy(boardToSplit.gameObject);
return(splitPieces);
}
void Start()
{
currentLine = null;
//timeStalling = 0.0f;
CurrentState = CutState.ReadyToCut;
}
void Start()
{
currentLine = null;
cuttingAlongLine = false;
CurrentState = CutState.ReadyToCut;
}
void Start()
{
CheckScoreRanges();
line = GetComponent <CutLine>();
}
void Update()
{
#region CuttingCode
if (manager.StillCutting)
{
currentBladePosition = SawBlade.EdgePosition();
totalTimePassed += Time.deltaTime;
UpdateFeedRateDate();
if (CurrentState == CutState.ReadyToCut)
{
SwitchLine();
if (SawBlade.CuttingWoodBoard && SawBlade.SawBladeActive)
{
Vector3 origin = SawBlade.EdgePosition() + new Vector3(0.0f, 0.5f, 0.0f);
Ray ray = new Ray(origin, Vector3.down);
RaycastHit hit;
if (Physics.Raycast(ray, out hit, Mathf.Infinity, mask) && (hit.collider.tag == "Piece" || hit.collider.tag == "Leftover"))
{
Vector3 bladeEdgePosition = new Vector3(currentLine.GetCurrentCheckpointPosition().x, hit.point.y, hit.point.z);
StartWoodCutting(bladeEdgePosition);
}
}
}
else if (CurrentState == CutState.Cutting && SawBlade.SawBladeActive)
{
if (cuttingAlongLine)
{
currentLine.UpdateLine(SawBlade.EdgePosition());
if (currentLine.LineIsCut())
{
CurrentState = CutState.EndingCut;
}
else
{
if (totalTimePassed >= timeUpdateFrequency)
{
totalTimePassed = 0.0f;
totalTimeStalling = 0.0f;
FeedRateTracker.UpdateScoreWithRate(playerFeedRate);
}
if (FeedRateTracker.RateTooSlow || FeedRateTracker.RateTooFast)
{
totalTimeStalling += Time.deltaTime;
FeedRateTracker.ReduceScoreDirectly(0.1f);
if (totalTimeStalling >= MaxStallTime && FeedRateTracker.RateTooSlow)
{
manager.StopGameDueToLowScore("You were cutting too slow, now the wood is burnt.");
}
else if (totalTimeStalling >= 1.0f && FeedRateTracker.RateTooFast)
{
manager.StopGameDueToLowScore("You were cutting too fast and caused the saw to bind.");
}
}
}
}
else
{
if (SawBlade.NoInteractionWithBoard)
{
timeNotCuttingLine = 0.0f;
CurrentState = CutState.ReadyToCut;
SawBlade.ResetEdgePosition();
currentLine = null;
manager.RestrictCurrentBoardMovement(false, false);
}
else
{
timeNotCuttingLine += Time.deltaTime;
if (totalTimePassed >= timeUpdateFrequency)
{
totalTimePassed = 0.0f;
FeedRateTracker.ReduceScoreDirectly(0.8f);
}
if (timeNotCuttingLine >= MaxStallTime)
{
manager.StopGameDueToLowScore("You were not cutting along the line, and now the board is ruined.");
}
}
}
}
else if (CurrentState == CutState.EndingCut)
{
if (!SawBlade.CuttingWoodBoard && SawBlade.NoInteractionWithBoard)
{
manager.DisplayScore(FeedRateTracker);
manager.SplitMaterial(currentLine);
cuttingAlongLine = false;
currentLine = null;
SawBlade.ResetEdgePosition();
CurrentState = CutState.ReadyToCut;
FeedRateTracker.ResetFeedRate();
}
}
}
previousBladePosition = currentBladePosition;
if (FeedRateTracker.GetLineScore() <= 0.0f)
{
manager.StopGameDueToLowScore("This cut is too messed up to keep going.");
}
#endregion
}
public static bool RunLineCut(CutLine line, bool preCut = false)
{
do
{
switch (line.CutStep)
{
case CutStep.Ready: //等待各轴移动到位
{
if (line.SinDir || !line.Dual || (line.Dual && Globals.DevData.DualZlife)) //如果为单项划切或者必须返回
{
Z_Axis.AxisJogAbsWork(line.SelfPos); //划切一刀 必须Z轴上升到安全位
}
if (WaitAxisMoveDone()) //判断各轴是否到位
{
line.Cutting = true; //开始切割
line.FirstCut = true;
if (line.Seg != null && !line.Abs)
{
line.Seg.RepairXPosAndLength(Y_Axis.RealPos + line.StartPos.Y, line); //修正起始位置和长度
}
if (preCut) //根据是否预划切 修正划切速度
{
float s = Globals.Group.PreCut.GetPreDataSpeed();
if (s > 0 && s < line.Speed) //预划切值有效且小于当前划切速度
{
line.Speed = s;
}
else
{
Globals.PreCut = false;
}
}
line.CutStep = CutStep.ST1;
}
else
{
return(false);
}
}
break;
case CutStep.ST1: //X 轴移动到划切位置 需要根据当前Y轴位置重新计算X轴起点和划切长度
{
X_Axis.JogAbs(line.BackSpeed, Globals.MacData.XCutBackAcc, line.StartPos.X); //设置X返回加速度
if (line.Abs)
{
Y_Axis.AxisJogAbsWork(line.StartPos.Y);
}
else
{
//float v = Math.Abs(line.StartPos.Y / line.Length * line.BackSpeed);
//Y_Axis.JogInc(v, 0.1f, line.StartPos.Y);
Y_Axis.AxisJogIncWork(line.StartPos.Y); //相对位置
}
WaitAxisMoveDone(Y_Axis);
if (WaitAxisMoveDone(X_Axis))
{
line.CutStep = CutStep.ST2;
}
else
{
return(false);
}
}
break;
case CutStep.ST2: //Z轴下落到划切位置1
{
float pos = line.ReDepth + Globals.TestHeightValue - Globals.BldData.RealCompensatedValue;
if (pos < Globals.TestHeightValue) //防止切割到工作台
{
pos = Globals.TestHeightValue;
}
Z_Axis.JogAbs(Globals.MacData.ZCutSpeed, Globals.MacData.ZCutAcc, pos); //Z轴下落到位 必须等候Z到位
if (WaitAxisMoveDone(Z_Axis))
{
line.CutStep = CutStep.ST3;
}
else
{
return(false);
}
}
break;
case CutStep.ST3: //X轴进行划切操作
{
X_Axis.JogInc(line.Speed, Globals.MacData.XCutAcc, line.Dir ? -line.Length : line.Length); //X轴开始缓慢划切 判断划切方向
if (WaitAxisMoveDone(X_Axis))
{
line.CutStep = CutStep.ST4;
Globals.BldData.AddCutedLinesAndLength(1, line.Length / 1000); //已划切刀数
}
else
{
return(false);
}
}
break;
case CutStep.ST4: //Z轴是否抬刀
{
if (line.SinDir || !line.Dual || (line.Dual && Globals.DevData.DualZlife)) //如果为单项划切或者必须返回
{
Z_Axis.AxisJogAbsWork(line.SelfPos); //划切一刀 必须Z轴上升到安全位
if (!WaitAxisMoveDone(Z_Axis))
{
return(false);
}
}
if (line.Dual)
{
line.CutStep = CutStep.ST5;
}
else
{
line.CutStep = CutStep.CutStop;
}
}
break;
case CutStep.ST5: //X轴返回到划切位置
{
line.FirstCut = false;
if (line.SinDir) //如果是单向划切X轴必须返回到划切位置
{
X_Axis.JogAbs(line.BackSpeed, Globals.MacData.XCutBackAcc, line.StartPos.X); //需要重新设置X划切返回速度
if (!WaitAxisMoveDone(X_Axis))
{
return(false);
}
}
line.CutStep = CutStep.ST6;
}
break;
case CutStep.ST6: //Z轴下落到划切位置
{
if (preCut) //根据是否预划切 修正划切速度
{
float s = Globals.Group.PreCut.GetPreDataSpeed();
if (s > 0 && s < line.Speed) //预划切值有效且小于当前划切速度
{
line.Speed = s;
}
else
{
Globals.PreCut = false;
}
}
float pos = line.ReDepth2 + Globals.TestHeightValue - Globals.BldData.RealCompensatedValue;
if (pos < Globals.TestHeightValue)
{
pos = Globals.TestHeightValue;
}
Z_Axis.JogAbs(Globals.MacData.ZCutSpeed, Globals.MacData.ZCutAcc, pos); //Z轴下落到位置2
if (WaitAxisMoveDone(Z_Axis))
{
line.CutStep = CutStep.ST7;
}
else
{
return(false);
}
}
break;
case CutStep.ST7: //X轴开始划切
{
if (line.SinDir)
{
X_Axis.JogInc(line.Speed, Globals.MacData.XCutAcc, line.Dir ? -line.Length : line.Length); //需要设置返回加速度
}
else
{
X_Axis.JogInc(line.Speed, Globals.MacData.XCutAcc, line.Dir ? line.Length : -line.Length);
}
if (WaitAxisMoveDone(X_Axis))
{
line.CutStep = CutStep.ST8;
Globals.BldData.AddCutedLinesAndLength(1, line.Length / 1000); //已划切刀数
}
else
{
return(false);
}
}
break;
case CutStep.ST8: //Z轴进行抬刀操作
{
if (line.SinDir || !line.Dual) //如果为单项划切或者必须返回
{
Z_Axis.AxisJogAbsWork(line.SelfPos); //划切一刀 必须Z轴上升到安全位
}
line.Cutting = false;
line.CutStep = CutStep.CutStop;
}
break;
case CutStep.CutStop: //划切结束
{
if (line.Pause)
{
line.CutStep = CutStep.Pause;
}
else
{
line.CutStep = CutStep.STEnd; //当前先判断为切割完成 后续需要判断是否暂停 刀痕检测 和测高
}
ReportWorkingProgress(ProcessCmd.CutLineCmd, line);
}
break;
case CutStep.KniefCheck: //进行刀痕检测
{
}
break;
case CutStep.TestHeigh: //进行非接触式测高
{
}
break;
case CutStep.Pause:
{
ReportCmdKeyProgress(CmdKey.P0105);
line.CutStep = CutStep.STEnd; //配置为划切完成
return(false); //中断当前划切操作
}
case CutStep.STEnd:
{
line.Complate = true;
}
break;
default:
{
}
break;
}
if (Globals.CutStop)
{
return(false);
}
ReportWorkingProgress(ProcessCmd.CutLineCmd, line);
CuttingCheckStatus();
Thread.Sleep(10);
} while (!line.Complate);//没有完成就一直循环
return(true);
}//划切线
public void AddLine(CutLine lineToAdd)
{
LinesToCut.Add(lineToAdd);
}
public static void RemoveCutLine(WoodMaterialObject boardToSplit, CutLine detachedLine)
{
detachedLine.SeverConnections();
boardToSplit.RemoveLine(detachedLine);
Destroy(detachedLine.gameObject);
}
void Update()
{
#region CuttingCode
if (manager.StillCutting)
{
totalTimePassed += Time.deltaTime;
if (CurrentState == CutState.ReadyToCut)
{
SwitchLine();
if (Blade.CuttingWoodBoard && Blade.SawActive)
{
Vector3 origin = Blade.transform.position + new Vector3(0.0f, 0.1f, 0.0f);
Ray ray = new Ray(origin, Vector3.down);
RaycastHit hit;
if (Physics.Raycast(ray, out hit) && (hit.collider.tag == "Piece" || hit.collider.tag == "Leftover" || hit.collider.tag == "Dado"))
{
hit.collider.gameObject.transform.parent.GetComponent <BandSawPieceController>().RotationPoint = hit.point;
StartWoodCutting();
}
}
}
else if (CurrentState == CutState.Cutting && Blade.SawActive)
{
float distanceFromBlade = currentLine.CalculateDistance(Blade.transform.position);
bool cuttingAlongLine = (distanceFromBlade <= ValidCutOffset);
if (cuttingAlongLine)
{
currentLine.UpdateLine(Blade.transform.position, ValidCutOffset);
if (currentLine.LineIsCut())
{
CurrentState = CutState.EndOfCut;
}
if (totalTimePassed >= timeUpdateFrequency)
{
totalTimePassed = 0.0f;
if (distanceFromBlade <= ValidCutOffset && distanceFromBlade >= 0.015f)
{
lineScore -= 0.2f;
}
else if (distanceFromBlade <= 0.015f && distanceFromBlade >= 0.01f)
{
lineScore -= 0.1f;
}
}
}
else
{
if (totalTimePassed >= timeUpdateFrequency)
{
totalTimePassed = 0.0f;
lineScore -= 0.5f;
}
totalTimeNotCuttingLine += Time.deltaTime;
if (totalTimeNotCuttingLine >= MaxTimeAwayFromLine)
{
manager.StopGameDueToLowScore("You've messed up the wood too much.");
}
else if (Blade.NoInteractionWithBoard)
{
CurrentState = CutState.ReadyToCut;
Blade.ResetEdgePosition();
currentLine.Reset();
currentLine = null;
manager.SetUpBoardForCutting(false);
}
}
}
else if (CurrentState == CutState.EndOfCut)
{
if (!Blade.CuttingWoodBoard && Blade.NoInteractionWithBoard)
{
manager.DisplayScore(lineScore);
lineScore = 100.0f;
manager.SetUpBoardForCutting(false);
manager.SplitMaterial(currentLine);
currentLine = null;
Blade.ResetEdgePosition();
CurrentState = CutState.ReadyToCut;
}
}
if (lineScore <= 0.0f)
{
manager.StopGameDueToLowScore("This cut is too messed up to keep going.");
}
if (totalTimePassed >= timeUpdateFrequency)
{
totalTimePassed = 0.0f;
}
}
#endregion
}
/// <summary>
/// Handles what happens after a line is cut
/// </summary>
/// <param name="lineToRemove">The line that was cut</param>
public void SplitMaterial(CutLine lineToRemove)
{
//Delete the cut line and get the split wood material
WoodMaterialObject board = AvailableWoodMaterial[currentPieceIndex].GetComponent <WoodMaterialObject>();
BoardController previousBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
LinesToCut.Remove(lineToRemove);
AvailableWoodMaterial.RemoveAt(currentPieceIndex);
List <GameObject> pieces = WoodManagerHelper.SplitBoard(lineToRemove.GetFirstBaseNode(),
lineToRemove.GetSecondBaseNode(),
board, lineToRemove);
bool pieceAdded = false;
//This loop looks through the wood materials returned, assigns them a BoardController, and use the first piece found as the piece
//to put on the table saw. All other pieces are hidden away until they are needed.
foreach (GameObject piece in pieces)
{
WoodMaterialObject boardPiece = piece.GetComponent <WoodMaterialObject>();
if (boardPiece != null)
{
bool lineFound = false;
for (int i = 0; i < LinesToCut.Count && !lineFound; i++)
{
lineFound = boardPiece.ContainsLine(LinesToCut[i]);
}
//If a line is found, then the piece is a wood material gameobject
if (lineFound)
{
BoardController controller = piece.AddComponent <BoardController>();
controller.Moveable = true;
controller.WoodObject = boardPiece;
controller.MaxLimit_X = previousBoardController.MaxLimit_X;
controller.MaxLimit_Z = previousBoardController.MaxLimit_Z;
controller.MinLimit_X = previousBoardController.MinLimit_X;
controller.MinLimit_Z = previousBoardController.MinLimit_Z;
AvailableWoodMaterial.Add(piece);
if (!pieceAdded)
{
pieceAdded = true;
int index = AvailableWoodMaterial.IndexOf(piece);
currentPieceIndex = index;
AvailableWoodMaterial[currentPieceIndex].SetActive(true);
currentBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
}
else
{
piece.SetActive(false);
piece.transform.position = Vector3.zero;
piece.transform.rotation = Quaternion.identity;
}
}
else
{
Destroy(piece);
}
}
else
{
//This was kept around for the prototype,
//but we technically want to keep the piece around if it is a piece gameobject, or a wood material gameobject
//There just needs to be a container that will store all of the pieces and wood materials in the project.
Destroy(piece);
}
//If none of the pieces were wood material gameobjects, find one from the AvailableWoodMaterial list
if (!pieceAdded && AvailableWoodMaterial.Count > 0)
{
currentPieceIndex = 0;
AvailableWoodMaterial[currentPieceIndex].SetActive(true);
currentBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
SetupForCutting();
EnableCurrentBoardMovement(true);
RestrictCurrentBoardMovement(false, false);
AvailableWoodMaterial[currentPieceIndex].GetComponent <Rigidbody>().position = currentSpawnPoint.position + new Vector3(0.0f, 0.0f, -1.0f);
Vector3 directionToPiece = (AvailableWoodMaterial[currentPieceIndex].GetComponent <Rigidbody>().position - currentSpawnPoint.position).normalized;
Ray ray = new Ray(currentSpawnPoint.position, directionToPiece);
RaycastHit hit;
if (Physics.Raycast(ray, out hit, Mathf.Infinity))
{
float distance = (hit.point - currentSpawnPoint.position).magnitude;
AvailableWoodMaterial[currentPieceIndex].GetComponent <Rigidbody>().position += (distance * -directionToPiece);
}
}
SawBlade.TurnOff();
UI_Manager.ChangeSawButtons(false);
}
//If all the lines are cut, the step is done
if (LinesToCut.Count > 0)
{
UI_Manager.UpdateSelectionButtons(currentPieceIndex, AvailableWoodMaterial.Count);
}
else
{
UI_Manager.InfoPanel.SetActive(true);
UI_Manager.InfoText.text = "All of the lines are cut. \nOn to the next step.";
UI_Manager.HideButton.gameObject.SetActive(false);
UI_Manager.StartOverButton.gameObject.SetActive(false);
UI_Manager.NextSceneButton.gameObject.SetActive(true);
StillCutting = false;
float percentage = cumulativeLineScore / numberOfCuts;
if (GameManager.instance != null)
{
GameManager.instance.scoreTracker.ApplyScore(percentage);
}
else
{
Debug.Log("Score Applied: " + percentage);
}
}
}
public bool ContainsLine(CutLine line)
{
return(LinesToCut.Contains(line));
}
private void ProcessCutLineStep(CutLine line)
{
switch (line.CutStep)
{
case CutStep.ST1: //更新划切等相关信息
{
cutSpeed.Text = line.Speed.ToString(); //当前配置的划切速度
cutLeaveLines.Text = line.Seg.WaitCutNum.ToString(); //当前剩余划切刀数
if (line.Seg != null)
{
cutProcess.StringFormat = string.Format(userFormat, line.Index, line.Seg.Lines.Count) + sysFormat;
cutProcess.Value = (int)(line.Seg.CuttingIndex * 100 / line.Seg.Lines.Count); //划切进度条
}
} break;
case CutStep.ST3:
{
if (!watch.IsRunning)
{
watch.Start(); //开始计时
}
lineCutPen.DashStyle = DashStyle.Dash; //虚线划切
startPoint = Globals.AxisPoint; //获取当前位置绝对位置
timer.Start(); //开始进行模拟划切
}
break;
case CutStep.ST7:
{
lineCutPen.DashStyle = DashStyle.Solid;
startPoint = Globals.AxisPoint; //获取当前位置绝对位置
}
break;
case CutStep.ST8:
case CutStep.CutStop:
{
if (timer.IsEnabled)
{
timer.Stop();
}
} break;
case CutStep.Pause:
case CutStep.STEnd:
{
if (timer.IsEnabled)
{
timer.Stop();
}
if (line.SinDir)
{
DrawLine(g, startPoint, line.Dir ? line.Length : -line.Length, false);
}
else
{
if (line.Dual)
{
DrawLine(g, startPoint, line.Dir ? -line.Length : line.Length, false);
}
else
{
DrawLine(g, startPoint, line.Dir ? line.Length : -line.Length, false);
}
}
}
break; //划切停止
default:
break;
}
}
public void RemoveLine(CutLine lineToRemove)
{
LinesToCut.Remove(lineToRemove);
}
public void SplitMaterial(CutLine lineToRemove)
{
WoodMaterialObject board = AvailableWoodMaterial[currentPieceIndex].GetComponent <WoodMaterialObject>();
BoardController previousBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
LinesToCut.Remove(lineToRemove);
AvailableWoodMaterial.RemoveAt(currentPieceIndex);
List <GameObject> pieces = WoodManagerHelper.SplitBoard(lineToRemove.GetFirstBaseNode(),
lineToRemove.GetSecondBaseNode(),
board, lineToRemove);
bool pieceAdded = false;
foreach (GameObject piece in pieces)
{
WoodMaterialObject boardPiece = piece.GetComponent <WoodMaterialObject>();
if (boardPiece != null)
{
bool lineFound = false;
for (int i = 0; i < LinesToCut.Count && !lineFound; i++)
{
lineFound = boardPiece.ContainsLine(LinesToCut[i]);
}
if (lineFound)
{
BoardController controller = piece.AddComponent <BoardController>();
controller.Moveable = true;
controller.WoodObject = boardPiece;
controller.MaxLimit_X = previousBoardController.MaxLimit_X;
controller.MaxLimit_Z = previousBoardController.MaxLimit_Z;
controller.MinLimit_X = previousBoardController.MinLimit_X;
controller.MinLimit_Z = previousBoardController.MinLimit_Z;
AvailableWoodMaterial.Add(piece);
if (!pieceAdded)
{
pieceAdded = true;
int index = AvailableWoodMaterial.IndexOf(piece);
currentPieceIndex = index;
AvailableWoodMaterial[currentPieceIndex].SetActive(true);
currentBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
}
else
{
piece.SetActive(false);
piece.transform.position = Vector3.zero;
piece.transform.rotation = Quaternion.identity;
}
}
else
{
Destroy(piece);
}
}
}
if (!pieceAdded && AvailableWoodMaterial.Count > 0)
{
currentPieceIndex = 0;
AvailableWoodMaterial[currentPieceIndex].SetActive(true);
currentBoardController = AvailableWoodMaterial[currentPieceIndex].GetComponent <BoardController>();
SetupForCutting();
PlacePiece();
}
SawBlade.TurnOff();
UI_Manager.ChangeSawButtons(false);
if (LinesToCut.Count > 0)
{
UI_Manager.UpdateSelectionButtons(currentPieceIndex, AvailableWoodMaterial.Count);
}
else
{
UI_Manager.InfoPanel.SetActive(true);
UI_Manager.InfoText.text = "All of the lines are cut. \nOn to the next step.";
UI_Manager.HideButton.gameObject.SetActive(false);
UI_Manager.StartOverButton.gameObject.SetActive(false);
UI_Manager.NextSceneButton.gameObject.SetActive(true);
StillCutting = false;
float percentage = cumulativeLineScore / numberOfCuts;
if (GameManager.instance != null)
{
GameManager.instance.ApplyScore(percentage);
}
else
{
Debug.Log("No game manager");
}
}
}
