//////////////////////////////////////////////////////////////////////////////////////////////
// The public static method to start the demo
//
//////////////////////////////////////////////////////////////////////////////////////////////
public static void Demo()
{
Inventor.Application InvApp = AdnInventorUtilities.InvApplication;
object selection = InvApp.CommandManager.Pick(
SelectionFilterEnum.kPartBodyFilter,
"Select a SurfaceBody: ");
if (selection == null)
{
return;
}
SurfaceBody body = selection as SurfaceBody;
AdnClientGraphicsManager clientGraphicsMng = new AdnClientGraphicsManager(
InvApp,
AdnInventorUtilities.AddInGuid);
GraphicsNode node = clientGraphicsMng.CreateNewGraphicsNode();
foreach (Edge edge in body.Edges)
{
CurveGraphics graphic = clientGraphicsMng.DrawCurve(edge.Geometry, node);
graphic.LineWeight = 5.0;
graphic.Parent.RenderStyle = InvApp.ActiveDocument.RenderStyles["Red"];
}
clientGraphicsMng.UpdateView();
}
void DoDemo()
{
Inventor.Application InvApp = AdnInventorUtilities.InvApplication;
_interactionManager = new AdnInteractionManager(InvApp);
_interactionManager.Initialize();
_interactionManager.SelectEvents.SingleSelectEnabled = true;
_interactionManager.OnTerminateEvent +=
new AdnInteractionManager.OnTerminateHandler(OnTerminateEvent);
_interactionManager.SelectEvents.OnSelect +=
new SelectEventsSink_OnSelectEventHandler(SelectEvents_OnSelect);
_interactionManager.AddSelectionFilter(SelectionFilterEnum.kPartFacePlanarFilter);
_interactionManager.AddSelectionFilter(SelectionFilterEnum.kWorkPlaneFilter);
_interactionManager.Start("Select workplane/planar face: ");
_clientGraphicsMng = new AdnClientGraphicsManager(
AdnInventorUtilities.InvApplication,
AdnInventorUtilities.AddInGuid);
_clientGraphicsMng.SetGraphicsSource(
_interactionManager.InteractionEvents);
_curveGraph = null;
_mode = SelectModeEnum.kPlaneSelect;
}
//////////////////////////////////////////////////////////////////////////////////////////////
//
//
//////////////////////////////////////////////////////////////////////////////////////////////
void SelectEvents_OnSelect(
ObjectsEnumerator JustSelectedEntities,
SelectionDeviceEnum SelectionDevice,
Point ModelPosition,
Point2d ViewPosition,
View View)
{
switch (_mode)
{
case SelectModeEnum.kPlaneSelect:
{
_plane = AdnInventorUtilities.GetPlane(JustSelectedEntities[1]);
_interactionManager.MouseEvents.MouseMoveEnabled = true;
_interactionManager.ClearSelectionFilters();
_interactionManager.AddSelectionFilter(SelectionFilterEnum.kPartVertexFilter);
_interactionManager.AddSelectionFilter(SelectionFilterEnum.kWorkPointFilter);
_interactionManager.InteractionEvents.StatusBarText = "Select center: ";
_mode = SelectModeEnum.kCenterSelect;
break;
}
case SelectModeEnum.kCenterSelect:
{
_center = AdnInventorUtilities.GetPoint(JustSelectedEntities[1]);
Circle circle = AdnInventorUtilities.InvApplication.TransientGeometry.CreateCircle(
_center,
_plane.Normal,
0.001);
_curveGraph = _clientGraphicsMng.DrawCurve(circle);
_curveGraph.LineWeight = 0.5;
_interactionManager.InteractionEvents.StatusBarText = "Select radius: ";
_interactionManager.MouseEvents.OnMouseMove +=
new MouseEventsSink_OnMouseMoveEventHandler(MouseEvents_OnMouseMove);
_interactionManager.SelectEvents.OnSelect -=
new SelectEventsSink_OnSelectEventHandler(SelectEvents_OnSelect);
_mode = SelectModeEnum.kRadiusSelect;
break;
}
default:
break;
}
}
//////////////////////////////////////////////////////////////////////////////////////////////
// Creates a new GraphicsNode that contains our graphic symbol
//
//////////////////////////////////////////////////////////////////////////////////////////////
GraphicsNode DrawSymbol(
UnitVector normal,
Point center,
double radius)
{
Circle circle = _Tg.CreateCircle(center, normal, radius);
double[] up = new double[] { center.X, center.Y + radius, 0 };
double[] down = new double[] { center.X, center.Y - radius, 0 };
double[] right = new double[] { center.X + radius, center.Y, 0 };
double[] left = new double[] { center.X - radius, center.Y, 0 };
GraphicsNode node = _clientGraphicsMng.CreateNewGraphicsNode();
node.Selectable = true;
CurveGraphics curve = _clientGraphicsMng.DrawCurve(circle, node);
LineGraphics lineVert = _clientGraphicsMng.DrawLine(up, down, node);
LineGraphics lineHorz = _clientGraphicsMng.DrawLine(left, right, node);
return(node);
}
public CurveGraphics DrawCurve(
object curve,
GraphicsNode node)
{
try
{
AdnGraphics graphicsData = WorkingGraphics;
if (node == null)
{
node = graphicsData.ClientGraphics.AddNode(
graphicsData.GetGraphicNodeFreeId());
}
CurveGraphics graphic = node.AddCurveGraphics(curve);
return(graphic);
}
catch
{
return(null);
}
}
void DoDemo()
{
Inventor.Application InvApp = AdnInventorUtilities.InvApplication;
_interactionManager = new AdnInteractionManager(InvApp);
_interactionManager.Initialize();
_interactionManager.SelectEvents.SingleSelectEnabled = true;
_interactionManager.OnTerminateEvent +=
new AdnInteractionManager.OnTerminateHandler(OnTerminateEvent);
_interactionManager.SelectEvents.OnSelect +=
new SelectEventsSink_OnSelectEventHandler(SelectEvents_OnSelect);
_interactionManager.AddSelectionFilter(SelectionFilterEnum.kPartFacePlanarFilter);
_interactionManager.AddSelectionFilter(SelectionFilterEnum.kWorkPlaneFilter);
_interactionManager.Start("Select workplane/planar face: ");
_clientGraphicsMng = new AdnClientGraphicsManager(
AdnInventorUtilities.InvApplication,
AdnInventorUtilities.AddInGuid);
_clientGraphicsMng.SetGraphicsSource(
_interactionManager.InteractionEvents);
_curveGraph = null;
_mode = SelectModeEnum.kPlaneSelect;
}
//////////////////////////////////////////////////////////////////////////////////////////////
//
//
//////////////////////////////////////////////////////////////////////////////////////////////
void SelectEvents_OnSelect(
ObjectsEnumerator JustSelectedEntities,
SelectionDeviceEnum SelectionDevice,
Point ModelPosition,
Point2d ViewPosition,
View View)
{
switch (_mode)
{
case SelectModeEnum.kPlaneSelect:
{
_plane = AdnInventorUtilities.GetPlane(JustSelectedEntities[1]);
_interactionManager.MouseEvents.MouseMoveEnabled = true;
_interactionManager.ClearSelectionFilters();
_interactionManager.AddSelectionFilter(SelectionFilterEnum.kPartVertexFilter);
_interactionManager.AddSelectionFilter(SelectionFilterEnum.kWorkPointFilter);
_interactionManager.InteractionEvents.StatusBarText = "Select center: ";
_mode = SelectModeEnum.kCenterSelect;
break;
}
case SelectModeEnum.kCenterSelect:
{
_center = AdnInventorUtilities.GetPoint(JustSelectedEntities[1]);
Circle circle = AdnInventorUtilities.InvApplication.TransientGeometry.CreateCircle(
_center,
_plane.Normal,
0.001);
_curveGraph = _clientGraphicsMng.DrawCurve(circle);
_curveGraph.LineWeight = 0.5;
_interactionManager.InteractionEvents.StatusBarText = "Select radius: ";
_interactionManager.MouseEvents.OnMouseMove +=
new MouseEventsSink_OnMouseMoveEventHandler(MouseEvents_OnMouseMove);
_interactionManager.SelectEvents.OnSelect -=
new SelectEventsSink_OnSelectEventHandler(SelectEvents_OnSelect);
_mode = SelectModeEnum.kRadiusSelect;
break;
}
default:
break;
}
}