/// <summary>
/// Test connect click event procedure.
/// </summary>
private void Button_Connect_Click(object sender, EventArgs e)
{
// set result to default value ..
resultVar = ConnectResult.NONE;
// lock controls ..
this.FormControls(false);
// analysis server address ..
IPAddress[] ipadds = Dns.GetHostAddresses(this.TextBox_Server.Text.Trim());
if (ipadds.Length > 0)
{
// assign ip address ..
this.Addr = ipadds[0];
// create therad object ..
__Connect = new System.Threading.Thread(
new System.Threading.ParameterizedThreadStart(this.Connecting));
// start thread process and timer check ..
__Connect.Start(ipadds[0]);
__reply.Start();
}
else
{
MessageBox.Show(this.ParseErrMsg, AssemblyInfoClass.ProductInfo,
MessageBoxButtons.OK, MessageBoxIcon.Error);
// unlock controls ..
this.FormControls(true);
return;
}
}
public static string BuildChannelError(IClientInputChannel channel, ConnectResult result, bool isException)
{
var messageBuilder = new StringBuilder();
messageBuilder.AppendFormat("Unable to connect ");
if (isException)
{
messageBuilder.AppendFormat(" due to an application error");
}
else
{
switch (result)
{
case ConnectResult.AuthFailure:
messageBuilder.AppendFormat(", server said: {0}", channel.AuthMessage);
break;
default:
messageBuilder.AppendFormat(" due to a channel error");
break;
}
}
return(messageBuilder.ToString());
}
public async Task connect_with_clean_session_but_connack_return_code_is_invalid_should_throw()
{
Queue <TestPacket> packets = new();
TestPacket connectPacket = TestPacket.Outgoing("101600044d5154540402001e000a434b4d71747454657374");
const int startSkipCount = 6; // These packets are valid, so we skip them.
for (byte i = startSkipCount; i != 0; i++) //Ok there we loop over all non zero bytes.
{
packets.Enqueue(connectPacket);
packets.Enqueue(TestPacket.Incoming("200200" + BitConverter.ToString(new byte[] { i })));
}
PacketReplayer packetReplayer = new(packets);
IMqtt3Client client = MqttClient.Factory.CreateMQTT3Client(TestConfigs.DefaultTestConfig(packetReplayer), (IActivityMonitor m, DisposableApplicationMessage msg) =>
{
msg.Dispose();
return(new ValueTask());
});
for (byte i = startSkipCount; i != 0; i++)
{
ConnectResult res = await client.ConnectAsync(TestHelper.Monitor, new MqttClientCredentials( "CKMqttTest", true ));
res.ConnectError.Should().Be(ConnectError.ProtocolError_UnknownReturnCode);
}
packetReplayer.LastWorkTask !.IsCompletedSuccessfully.Should().BeTrue();
}
void desktopConnector1_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric <ConnectResult>(this.desktopConnector1_ConnectEnded), res);
}
else
{
this.Cursor = Cursors.Default;
if (res == ConnectResult.Succeed)
{
this.desktopConnector1.Visible = true;
this.skinComboBox_quality.Visible = true;
this.skinLabel_quality.Visible = true;
int quality = this.desktopConnector1.GetVideoQuality();
int index = (quality - 1) / 5;
if (index < 0)
{
index = 0;
}
if (index > 3)
{
index = 3;
}
this.skinComboBox_quality.SelectedIndex = index;
return;
}
MessageBoxEx.Show(string.Format("连接{0}的桌面失败。原因：{1}", this.ownerName, res));
this.Close();
}
}
public async Task <ConnectResult> SendAccountAuthentication(ConnectData connectData)
{
var response = new SocketMessage();
if (_socketManager.IsReconnecting)
{
response = await SendStandardMessage(
RouteProvider.AUTHENTICATION_RECONNECT,
RouteProvider.AuthenticationReconnect(connectData, _socketManager.ActiveCharacterId));
}
else
{
response = await SendStandardMessage(RouteProvider.LOGIN, RouteProvider.Login(connectData));
}
var loginData = SocketUtilities.ParseDataFromResponse <LoginDataDTO>(response.Response);
ConnectResult connectResult = _socketManager.GetConnectResult();
connectResult.IsConnected = true;
connectResult.AccessToken = loginData?.AccessToken;
connectResult.TW2AccountId = loginData?.PlayerId;
_socketManager.ConnectData.AccessToken = loginData?.AccessToken;
DataEvents.InvokeLoginDataAvailable(loginData);
DataEvents.InvokeConnectionResult(connectResult);
return(connectResult);
}
void camera_ConnectEnded(ConnectResult obj)
{
if (this.ConnectEnded != null)
{
this.ConnectEnded(obj);
}
}
public ConnectEvent(EventInformation eventInformation, uint socket, EndPoint remoteEP, ConnectResult result)
: base(eventInformation)
{
m_socket = socket;
m_remoteEndPoint = remoteEP;
m_result = result;
}
public static async void StartConnectionAndTestConnectionDuration()
{
//Arrange
SocketManager socketManager = MockData.GetSocketManager();
Account account = SecretData.GetValidTestAccount();
ConnectData validCredentials = new ConnectData
{
Username = account.Username,
Password = account.Password,
ServerCountryCode = "en",
WorldID = "en48"
};
//Act
ConnectResult result1 = await socketManager.StartConnection(validCredentials);
Thread.Sleep(6000);
SocketMessage message = RouteProvider.GetDefaultSendMessage(RouteProvider.SYSTEM_GETTIME);
var result = await socketManager.Emit(message);
Thread.Sleep(600000);
//Assert
Assert.True(socketManager.IsConnected);
await socketManager.StopConnection(true);
}
public async Task <ConnectResult> Connect(string strDeviceID, NukiConnectionConfig connectionInfo)
{
ConnectResult result = ConnectResult.Failed;
try
{
if (connectionInfo != null)
{
m_connectionInfo = connectionInfo;
}
var deviceService = await GattDeviceService.FromIdAsync(strDeviceID);
if (deviceService != null)
{
foreach (var character in
deviceService.GetCharacteristics(KeyTurnerUGDIO.Value).
Concat(deviceService.GetCharacteristics(KeyTurnerPairingGDIO.Value)))
{
if (character.Uuid == KeyTurnerPairingGDIO.Value)
{
result = ConnectResult.Successfull;
m_pairingGDIO.SetConnection(character);
}
else if (character.Uuid == KeyTurnerUGDIO.Value)
{
result = ConnectResult.Successfull;
m_UGDIO.SetConnection(character);
}
}
if (m_bleDevice != null)
{
m_bleDevice.ConnectionStatusChanged -= M_bleDevice_ConnectionStatusChanged;
}
m_bleDevice = deviceService.Device;
m_bleDevice.ConnectionStatusChanged += M_bleDevice_ConnectionStatusChanged;
RaisePropertyChanged(nameof(Connected));
}
else
{
Log.Warn($"Unable to get GattDeviceService.FromIdAsync(\"{strDeviceID}\");");
}
if (m_bleDevice?.ConnectionStatus == BluetoothConnectionStatus.Connected)
{
result = ConnectResult.Connected;
}
}
catch (Exception ex)
{
Log.Error("Connect failed: {0}", ex);
if (ex is InvalidOperationException && (uint)ex.HResult == 0x8000000E)
{
result = ConnectResult.NeedRepair;
}
else
{
}
}
return(result);
}
public ConnectEvent(EventInformation eventInformation, uint socket, EndPoint remoteEP, ConnectResult result)
: base(eventInformation)
{
m_socket = socket;
m_remoteEndPoint = remoteEP;
m_result = result;
}
void desktopConnector1_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric<ConnectResult>(this.desktopConnector1_ConnectEnded), res);
}
else
{
this.Cursor = Cursors.Default;
if (res == ConnectResult.Succeed)
{
this.desktopConnector1.Visible = true;
this.skinComboBox_quality.Visible = true;
this.skinLabel_quality.Visible = true;
int quality = this.desktopConnector1.GetVideoQuality();
int index = (quality - 1) / 5;
if (index < 0)
{
index = 0;
}
if (index > 3)
{
index = 3;
}
this.skinComboBox_quality.SelectedIndex = index;
return;
}
MessageBoxEx.Show(string.Format("连接{0}的桌面失败。原因：{1}", this.ownerName, res));
this.Close();
}
}
void whiteBoard_ConnectEnded(ConnectResult obj)
{
if (this.ConnectEnded != null)
{
this.ConnectEnded(obj);
}
}
public async Task connect_with_clean_session_but_connack_session_present_is_not_zero_should_fail()
{
Queue <TestPacket> packets = new();
TestPacket connectPacket = TestPacket.Outgoing("101600044d5154540402001e000a434b4d71747454657374");
for (byte i = 1; i != 0; i++) //Ok there we loop over all non zero bytes.
{
packets.Enqueue(connectPacket);
packets.Enqueue(TestPacket.Incoming("2002" + BitConverter.ToString(new byte[] { i }) + "00"));
}
PacketReplayer pcktReplayer = new(packets);
IMqtt3Client client = MqttClient.Factory.CreateMQTT3Client(TestConfigs.DefaultTestConfig(pcktReplayer), (IActivityMonitor m, DisposableApplicationMessage msg) =>
{
msg.Dispose();
return(new ValueTask());
});
ConnectResult res = await client.ConnectAsync(TestHelper.Monitor, new MqttClientCredentials( "CKMqttTest", true ));
res.ConnectError.Should().Be(ConnectError.ProtocolError_SessionNotFlushed);
for (byte i = 2; i != 0; i++)
{
res = await client.ConnectAsync(TestHelper.Monitor, new MqttClientCredentials( "CKMqttTest", true ));
res.ConnectError.Should().Be(ConnectError.ProtocolError_InvalidConnackState);
}
pcktReplayer.LastWorkTask !.IsCompletedSuccessfully.Should().BeTrue();
}
internal static string BuildChannelError(IClientInputChannel channel, ConnectResult result, bool isException)
{
var messageBuilder = new StringBuilder();
messageBuilder.Append(Strings.UnableToConnect);
messageBuilder.Append(", ");
if (isException)
{
messageBuilder.Append(Strings.DueToAnApplicationError);
}
else
{
switch (result)
{
case ConnectResult.AuthFailure:
messageBuilder.AppendFormat(Strings.ServerSaid, channel.AuthMessage);
break;
default:
messageBuilder.Append(Strings.DueToAChannelError);
break;
}
}
return messageBuilder.ToString();
}
public static string BuildChannelError(IClientInputChannel channel, ConnectResult result, bool isException)
{
var messageBuilder = new StringBuilder();
messageBuilder.AppendFormat("Unable to connect ");
if (isException)
{
messageBuilder.AppendFormat(" due to an application error");
}
else
{
switch (result)
{
case ConnectResult.AuthFailure:
messageBuilder.AppendFormat(", server said: {0}", channel.AuthMessage);
break;
default:
messageBuilder.AppendFormat(" due to a channel error");
break;
}
}
return messageBuilder.ToString();
}
public ConnectResult Connect()
{
_socket.SendHttpRequest("POST", "/vpnsvc/connect.cgi", Encoding.ASCII.GetBytes("VPNCONNECT"),
SoftEtherNetwork.GetDefaultHeaders());
var connectResponse = _socket.GetHttpResponse();
if (connectResponse.code != 200)
{
return new ConnectResult {
Error = SoftEtherError.ConnectFailed
}
}
;
var connectDict = SoftEtherProtocol.Deserialize(connectResponse.body);
var connectResult = ConnectResult.Deserialize(connectDict);
if (connectResult.Valid())
{
RandomFromServer = connectResult.random;
}
return(connectResult);
}
public async Task <ConnectResult> IsServerAvailable()
{
var uriBuilder = new UriBuilder(Endpoint.Uri);
uriBuilder.Path += "/";
uriBuilder.Scheme = uriBuilder.Scheme.Replace("ws", "http"); // FIXME: replacing "ws" with "http" is too hacky!
var req = new UnityWebRequest();
req.method = "GET";
var url = uriBuilder.Uri.ToString().Replace("2567", "2568");
req.url = url;
req.SetRequestHeader("Accept", "application/json");
req.downloadHandler = new DownloadHandlerBuffer();
await req.SendWebRequest();
var json = req.downloadHandler.text;
ConnectResult response;
if (string.IsNullOrEmpty(json))
{
response = new ConnectResult();
response.result = false;
}
else
{
response = JsonUtility.FromJson <ConnectResult>(json);
}
return(response);
}
void UpdateLastValidationMemoWithOfflineError(ConnectResult result)
{
Dispatcher.Invoke(() =>
{
switch (result)
{
case ConnectResult.Success:
break;
case ConnectResult.ConnectFailed:
case ConnectResult.LoginFailed:
var uniqueId = UniqueID;
var memo = new DesignValidationMemo
{
InstanceID = uniqueId,
IsValid = false,
};
memo.Errors.Add(new ErrorInfo
{
InstanceID = uniqueId,
ErrorType = ErrorType.Warning,
FixType = FixType.None,
Message = result == ConnectResult.ConnectFailed
? "Server is offline. This service will only execute when the server is online."
: "Server login failed. This service will only execute when the login permissions issues have been resolved."
});
UpdateLastValidationMemo(memo);
break;
}
});
}
/// <summary>
/// Will attempt to login with the account provided, if in test-mode then the connection will be closed immediately after.
/// </summary>
/// <param name="account">The account with which to login</param>
/// <param name="testMode">Will close the connection immediately after if true</param>
/// <returns>The connection result</returns>
public async Task <ConnectResult> LoginWithAccount(Account account, bool testMode = false)
{
// Make sure to reset the connection and deleting it.
await _socketManager.StopConnection(true);
ConnectResult result = await _socketManager.StartConnection(account.ToConnectData());
if (!result.IsConnected)
{
return(result);
}
result = await SendAccountAuthentication(account.ToConnectData());
await SendSystemIdentify();
result.IsConnected = await SendCharacterSelect(account.DefaultCharacter);
if (testMode)
{
await _socketManager.StopConnection(true);
}
else
{
DataEvents.InvokeConnectionStatus(true);
}
return(result);
}
internal static string BuildChannelError(IClientInputChannel channel, ConnectResult result, bool isException)
{
var messageBuilder = new StringBuilder();
messageBuilder.Append(Strings.UnableToConnect);
messageBuilder.Append(", ");
if (isException)
{
messageBuilder.Append(Strings.DueToAnApplicationError);
}
else
{
switch (result)
{
case ConnectResult.AuthFailure:
messageBuilder.AppendFormat(Strings.ServerSaid, channel.AuthMessage);
break;
default:
messageBuilder.Append(Strings.DueToAChannelError);
break;
}
}
return(messageBuilder.ToString());
}
public void ShowError(ConnectResult connectResult)
{
switch (connectResult)
{
case ConnectResult.Timeout:
case ConnectResult.InvalidEndpoint:
case ConnectResult.InvalidSocket:
case ConnectResult.SocketError:
{
var messageBox = _messageBoxFactory.CreateMessageBox(DialogResourceID.CONNECTION_SERVER_NOT_FOUND,
EODialogButtons.Ok,
EOMessageBoxStyle.SmallDialogLargeHeader);
messageBox.ShowDialog();
}
break;
default:
{
var errorCode = (int)connectResult;
var ex = new SocketException(errorCode);
var messageBox = _messageBoxFactory.CreateMessageBox(
$"Error code from socket: {ex.SocketErrorCode}",
"Internal Error");
messageBox.ShowDialog();
}
break;
}
}
void ShowChannelError(ConnectResult result, bool isException)
{
ClientState.Current.ShowMessage(
new AppMessage(ExceptionHelper.BuildChannelError(channel, result, isException))
{
SourceChannelId = config.ChannelId
}, MessageType.Error);
}
// This is executed in a new thread each time, so it is safe to use blocking calls
protected override void OnIncomingCall(Call call)
{
Console.WriteLine("Answering");
// Answer the incoming call, block until it's answered or an error occurs
AnswerResult resultAnswer = call.Answer();
if (!resultAnswer.Successful)
{
// The call was not answered successfully, stop the consumer and bail out
Stop();
return;
}
call.PlayTTS("Welcome to SignalWire!");
Console.WriteLine("Connecting");
// Connect the inbound call to an outbound call
ConnectResult resultConnect = call.Connect(new List <List <CallDevice> >
{
new List <CallDevice>
{
new CallDevice
{
Type = CallDevice.DeviceType.phone,
Parameters = new CallDevice.PhoneParams
{
ToNumber = "+1555XXXXXXX",
FromNumber = "+1555XXXXXXX",
}
}
}
});
if (resultConnect.Successful)
{
Console.WriteLine("Connected");
resultConnect.Call.PlayTTS("Welcome!");
// Wait upto 15 seconds for the connected side to hangup
if (!resultConnect.Call.WaitForEnded()) //TimeSpan.FromSeconds(15)))
{
// If the other side of the outbound call doesn't hang up, then hang it up
resultConnect.Call.Hangup();
}
}
call.PlayTTS("Thank you for trying SignalWire!");
// Hangup the inbound call
call.Hangup();
// Stop the consumer
Stop();
}
public void onResult(string p0, ConnectResult resultObject)
{
Debug.Log("[HMS] NearbyManager onResult");
if (resultObject.Status.StatusCode == StatusCode.STATUS_SUCCESS)
{
Debug.Log("[HMS] NearbyManager Connection Established. Stop discovery. Start to send file.");
}
nearbyManagerObject.OnResult?.Invoke(p0, resultObject);
}
void microphoneConnector1_ConnectEnded(ConnectResult result)
{
this.microConnect = result == ConnectResult.Succeed ? true : false;
if (microConnect.Value)
{
//音频连接成功的时候初始化 信号控件
this.channelQualityDisplayer1.Initialize(this.friendName);
}
this.DealConnectResult();
}
private void comboBox_Server_SelectedIndexChanged(object sender, EventArgs e)
{
if (this.comboBox_Server.Text.ToString().Trim() != "0.0.0.0")
{
#region 設定IP、Port顯示
this.NumericUpDown_Port.Value = this.MyServerList[this.comboBox_Server.SelectedIndex].ServerPort;
if (this.MyServerList[this.comboBox_Server.SelectedIndex].IsMaster)
{
this.checkBox_IsMaster.Checked = true;
}
else
{
this.checkBox_IsMaster.Checked = false;
}
#endregion
#region 測試是否可鏈接 Test connect click event procedure.
// set result to default value ..
resultVar = ConnectResult.NONE;
// lock controls ..
this.FormControls(false);
// 獲取地址 analysis server address ..
IPAddress[] ipadds = Dns.GetHostAddresses(this.comboBox_Server.Text.Trim());
if (ipadds.Length > 0)
{
// assign ip address ..
this.Addr = ipadds[0];
//創建新的線程鏈接伺服器 create therad object ..
__Connect = new System.Threading.Thread(new System.Threading.ParameterizedThreadStart(this.Connecting));
// start thread process and timer check ..
__Connect.Start(ipadds[0]);
__reply.Start();
}
else
{
MessageBox.Show(this.ParseErrMsg, AssemblyInfoClass.ProductInfo, MessageBoxButtons.OK, MessageBoxIcon.Error);
// unlock controls ..
this.FormControls(true);
return;
}
}
else
{
MessageBox.Show("未指定的位址");
}
#endregion
}
/// <summary>
/// 连接结束事件
/// </summary>
/// <param name="result"></param>
private void OnConnectEnded(ConnectResult result)
{
if (result == ConnectResult.Succeed)
{
ConnectEnded?.Invoke(new Result(baseResult.Successful));
}
else
{
ConnectEnded?.Invoke(new Result(baseResult.Faild, result.ToString()));
}
}
public ConnectResult TryConnect(string portName, bool sayhello)
{
if (portName == "")
{
return(ConnectResult.InvalidArgument);
}
Disconnect();
EventWaitHandle ewh = new EventWaitHandle(false, EventResetMode.AutoReset);
ConnectResult result = ConnectResult.None;
Arduino = new ArduinoSerial(portName);
Arduino.BytesSent += (port, bytes) => BytesSent?.Invoke(port, bytes);
Arduino.BytesReceived += (port, bytes) => BytesReceived?.Invoke(port, bytes);
ArduinoSerial.StatusChangedHandler statuschanged = status =>
{
lock (ewh)
{
if (result != ConnectResult.None)
{
return;
}
if (status == ArduinoSerial.Status.Connected || status == ArduinoSerial.Status.ConnectedUnsafe)
{
result = ConnectResult.Success;
ewh.Set();
}
if (status == ArduinoSerial.Status.Error)
{
result = ConnectResult.Error;
ewh.Set();
}
}
};
Arduino.StatusChanged += statuschanged;
Arduino.Connect(sayhello);
if (!ewh.WaitOne(300) && sayhello)
{
Arduino.Disconnect();
Arduino = null;
return(ConnectResult.Timeout);
}
if (result != ConnectResult.Success)
{
Arduino.Disconnect();
Arduino = null;
return(result);
}
Arduino.StatusChanged -= statuschanged;
_thread = new Thread(Loop);
_thread.IsBackground = true;
_thread.Start();
return(ConnectResult.Success);
}
void MicrophoneConnector_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric <ConnectResult>(this.MicrophoneConnector_ConnectEnded), res);
}
else
{
this.connectResult = res;
this.ShowMicState();
}
}
void MicrophoneConnector_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric<ConnectResult>(this.MicrophoneConnector_ConnectEnded), res);
}
else
{
this.connectResult = res;
this.ShowMicState();
}
}
//摄像头连接器尝试连接的结果
void DynamicCameraConnector_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric <ConnectResult>(this.DynamicCameraConnector_ConnectEnded), res);
}
else
{
this.label_tip.Visible = false;
this.connectCameraResult = res;
this.ShowCameraState();
}
}
public async Task ConnectToCFAsync_ReturnsConnectResult_WhenLoginFails()
{
mockCfApiClient.Setup(mock => mock.LoginAsync(It.IsAny <string>(), It.IsAny <string>(), It.IsAny <string>())).ReturnsAsync((string)null);
mockCfCliService.Setup(mock => mock.ExecuteCfCliCommandAsync(It.IsAny <string>(), It.IsAny <StdOutDelegate>(), It.IsAny <string>())).ReturnsAsync(new DetailedResult(true));
ConnectResult result = await cfService.ConnectToCFAsync(fakeValidTarget, fakeValidUsername, fakeValidPassword, fakeHttpProxy, skipSsl);
Assert.IsFalse(result.IsLoggedIn);
Assert.IsTrue(result.ErrorMessage.Contains(cfService.LoginFailureMessage));
Assert.IsNull(result.Token);
mockCfApiClient.Verify(mock => mock.LoginAsync(fakeValidTarget, fakeValidUsername, It.IsAny <string>()), Times.Once);
mockCfCliService.VerifyAll();
}
private PackageCatalog GetPackageCatalog(CompositeSearchBehavior behavior)
{
PackageCatalogReference reference = this.GetPackageCatalogReference(behavior);
ConnectResult result = reference.Connect();
if (result.Status == ConnectResultStatus.Ok)
{
return(result.PackageCatalog);
}
else
{
throw new RuntimeException(Utilities.ResourceManager.GetString("RuntimeExceptionCatalogError"));
}
}
/// <summary>
/// 获取ConnectResult枚举值对应的中文描述。
/// </summary>
public static string GetDescription(ConnectResult connectResult)
{
if (connectResult == ConnectResult.Succeed)
{
return("Succeed：连接成功。");
}
if (connectResult == ConnectResult.CantConnectRepeatly)
{
return("CantConnectRepeatly：不能重复连接同一设备！");
}
if (connectResult == ConnectResult.ChannelUnavailable)
{
return("ChannelUnavailable：通道不可用，当前客户端与OMCS服务器之间的连接尚未建立或已经断开！");
}
if (connectResult == ConnectResult.DeviceInUsing)
{
return("DeviceInUsing：要连接的目标设备已经被其它程序占用！");
}
if (connectResult == ConnectResult.DeviceInvalid)
{
return("DeviceInvalid：要连接的目标设备不存在或不可用！");
}
if (connectResult == ConnectResult.DeviceUnauthorized)
{
return("DeviceUnauthorized：本次OMCS授权不包含目标设备类型！");
}
if (connectResult == ConnectResult.ExceptionOccured)
{
return("ExceptionOccured：在连接的过程中出现了异常！");
}
if (connectResult == ConnectResult.OwnerNotInitialized)
{
return("MultimediaManagerNotInitialized目标设备主人的多媒体管理器还未完成初始化！");
}
if (connectResult == ConnectResult.SelfOffline)
{
return("SelfOffline：在连接的过程中，当前客户端与OMCS服务器之间的连接已经断开！");
}
if (connectResult == ConnectResult.TargetUserOffline)
{
return("TargetUserOffline：在连接的过程中，对方与OMCS之间的连接已经断开！");
}
if (connectResult == ConnectResult.Timeout)
{
return("Timeout：等待对方回复超时！");
}
return("");
}
void whiteBoardConnector1_ConnectEnded(ConnectResult result)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric<ConnectResult>(this.whiteBoardConnector1_ConnectEnded), result);
}
else
{
if (result != ConnectResult.Succeed)
{
MessageBox.Show("连接失败!" + result.ToString());
return;
}
}
}
/// <summary>
/// 鏈接指定地址的服務器 Connect remote server thread event.
/// </summary>
/// <param name="address">test address.</param>
private void Connecting(object address)
{
// create connect remote machine class object instance ..
ScanPort runConnect = new ScanPort();
// 測試是否可連接 scanning ..
if (!runConnect.Scan((IPAddress)address, (ushort)this.NumericUpDown_Port.Value))
{
resultVar = ConnectResult.FAILCONNECT;
}
else
{
resultVar = ConnectResult.SUCCESS;
}
}
public async Task<ConnectResult> TryConnectAsync(AsyncTcpConnector connector, int milliseconds)
{
var result = new ConnectResult { TimerTask = Task.Delay(milliseconds, Token) };
try
{
task = connector.ConnectAsync(tcp);
if (task == await Task.WhenAny(task, result.TimerTask).ConfigureAwait(false))
{
await task;
stream = tcp.GetStream();
result.Connected = true;
}
}
catch (SocketException)
{
// ignore
}
return result;
}
private void connectWorker_DoWork(object sender, DoWorkEventArgs e)
{
DbConnection cn = _factory.CreateConnection();
cn.ConnectionString = _connection.ConnectionString;
_connection.OpenConnection = cn;
try
{
cn.Open();
ConnectResult r = new ConnectResult();
r.Success = true;
r.Message = SR.ConnectSuccess;
e.Result = r;
}
catch (Exception ex)
{
ConnectResult r = new ConnectResult();
r.Success = false;
r.Message = SR.ConnectFail + "\r\n\r\n" + ex.GetBaseException().Message;
e.Result = r;
}
}
void ShowChannelError(ConnectResult result, bool isException)
{
ClientState.Current.ShowMessage(
new AppMessage(ExceptionHelper.BuildChannelError(channel, result, isException))
{
SourceChannelId = config.ChannelId
}, MessageType.Error);
}
public ChannelConnectException(ConnectResult result, string authMessage)
: base(string.Empty)
{
this.result = result;
this.authMessage = authMessage;
}
private void microphoneConnector1_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric<ConnectResult>(this.microphoneConnector1_ConnectEnded), res);
}
else
{
if (res != ConnectResult.Succeed)
{
this.decibelDisplayer_speaker.Working = false;
this.decibelDisplayer_speaker.Error = true;
}
}
}
private void dynamicCameraConnector1_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric<ConnectResult>(this.dynamicCameraConnector1_ConnectEnded), res);
}
else
{
try
{
this.skinPanel_tool.Visible = true;
this.skinLabel_tip.Visible = false;
this.timerLabel1.Start();
if (res == ConnectResult.Succeed)
{
this.skinCheckBox_HighR.Visible = true;
int sum = this.dynamicCameraConnector1.VideoSize.Width + this.dynamicCameraConnector1.VideoSize.Height;
int delt1 = Math.Abs(sum - GlobalConsts.CommonQualityVideo);
int delt2 = Math.Abs(sum - GlobalConsts.HighQualityVideo);
this.skinCheckBox_HighR.CheckState = delt2 < delt1 ? CheckState.Checked : CheckState.Unchecked;
this.button_record.Visible = true;
}
else
{
this.skinCheckBox_HighR.Visible = false;
this.skinLabel_cameraError.Text = res.ToString();
this.skinLabel_cameraError.Visible = true;
}
}
catch (Exception ee)
{
GlobalResourceManager.Logger.Log(ee, "dynamicCameraConnector1_ConnectEnded", ESBasic.Loggers.ErrorLevel.Standard);
MessageBox.Show(ee.Message + " - " + ee.StackTrace);
}
}
}
public override void ReadPayload(ISerializationContext context, IValueReader reader)
{
Result = (ConnectResult)reader.ReadByte();
KeyboardEncryption = reader.ReadBool();
MouseEncryption = reader.ReadBool();
}
void microphoneConnector1_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric<ConnectResult>(this.microphoneConnector1_ConnectEnded), res);
}
else
{
if (res != ConnectResult.Succeed)
{
this.label_error2.Visible = true;
this.label_error2.Text = res.ToString();
}
else
{
this.label_error2.Visible = false;
}
}
}
void cameraConnector1_ConnectEnded(ConnectResult res)
{
if (this.InvokeRequired)
{
this.BeginInvoke(new CbGeneric<ConnectResult>(this.cameraConnector1_ConnectEnded), res);
}
else
{
if (res != ConnectResult.Succeed)
{
this.label_error.Visible = true;
this.label_error.Text = res.ToString();
}
else
{
this.label_error.Visible = false;
}
this.label_info.Visible = false;
this.Cursor = Cursors.Default;
}
}