// ------------------ MAIN ----------------------
// Setup function
public void Setup(ControllerForm controllerForm)
{
// storing the controller form for later reference
_controllerForm = controllerForm;
// Create Serial Port object
_serialPortManager = new SerialPortManager
{
CurrentSerialSettings = { PortName = "COM6", BaudRate = 115200 } // object initializer
};
_cmdMessenger = new CmdMessenger(_serialPortManager);
// Tell CmdMessenger to "Invoke" commands on the thread running the WinForms UI
_cmdMessenger.SetControlToInvokeOn(_controllerForm);
// Attach the callbacks to the Command Messenger
AttachCommandCallBacks();
// Attach to NewLineReceived for logging purposes
_cmdMessenger.NewLineReceived += NewLineReceived;
// Attach to NewLineSent for logging purposes
_cmdMessenger.NewLineSent += NewLineSent;
// Start listening
_cmdMessenger.StartListening();
_controllerForm.SetLedState(true);
_controllerForm.SetFrequency(2);
}
public Action GoalTemperatureChanged; // Action that is called when the goal temperature has changed
// Setup function
public void Setup(ChartForm chartForm)
{
// getting the chart control on top of the chart form.
_chartForm = chartForm;
// Set up chart
_chartForm.SetupChart();
// Connect slider to GoalTemperatureChanged
GoalTemperatureChanged += () => _chartForm.GoalTemperatureTrackBarScroll(null, null);
// Create Serial Port object
// Note that for some boards (e.g. Sparkfun Pro Micro) DtrEnable may need to be true.
_serialTransport = new SerialTransport
{
CurrentSerialSettings = { PortName = "COM6", BaudRate = 115200, DtrEnable = false } // object initializer
};
// Initialize the command messenger with the Serial Port transport layer
_cmdMessenger = new CmdMessenger(_serialTransport)
{
BoardType = BoardType.Bit16, // Set if it is communicating with a 16- or 32-bit Arduino board
PrintLfCr = false // Do not print newLine at end of command, to reduce data being sent
};
// Tell CmdMessenger to "Invoke" commands on the thread running the WinForms UI
_cmdMessenger.SetControlToInvokeOn(chartForm);
// Set command strategy to continuously to remove all commands on the receive queue that
// are older than 1 sec. This makes sure that if data logging comes in faster that it can
// be plotted, the graph will not start lagging
_cmdMessenger.AddReceiveCommandStrategy(new StaleGeneralStrategy(1000));
// Attach the callbacks to the Command Messenger
AttachCommandCallBacks();
// Attach to NewLinesReceived for logging purposes
_cmdMessenger.NewLineReceived += NewLineReceived;
// Attach to NewLineSent for logging purposes
_cmdMessenger.NewLineSent += NewLineSent;
// Start listening
_cmdMessenger.StartListening();
// Send command to start sending data
var command = new SendCommand((int)Command.StartLogging);
// Send command
_cmdMessenger.SendCommand(command);
// Wait for a little bit and clear the receive queue
Thread.Sleep(250);
_cmdMessenger.ClearReceiveQueue();
// Set initial goal temperature
GoalTemperature = 25;
}
public Action GoalTemperatureChanged; // Action that is called when the goal temperature has changed
// Setup function
public void Setup(ChartForm chartForm)
{
// getting the chart control on top of the chart form.
_chartForm = chartForm;
// Set up chart
_chartForm.SetupChart();
// Connect slider to GoalTemperatureChanged
GoalTemperatureChanged += new Action(() => _chartForm.GoalTemperatureTrackBarScroll(null, null));
// Create Serial Port object
_serialTransport = new SerialTransport
{
CurrentSerialSettings = { PortName = "COM6", BaudRate = 115200 } // object initializer
};
// Initialize the command messenger with the Serial Port transport layer
_cmdMessenger = new CmdMessenger(_serialTransport);
// Tell CmdMessenger to "Invoke" commands on the thread running the WinForms UI
_cmdMessenger.SetControlToInvokeOn(chartForm);
// Set command strategy to continuously to remove all commands on the receive queue that
// are older than 1 sec. This makes sure that if data logging comes in faster that it can
// be plotted, the graph will not start lagging
_cmdMessenger.AddReceiveCommandStrategy(new StaleGeneralStrategy(1000));
// Attach the callbacks to the Command Messenger
AttachCommandCallBacks();
// Attach to NewLinesReceived for logging purposes
_cmdMessenger.NewLineReceived += NewLineReceived;
// Attach to NewLineSent for logging purposes
_cmdMessenger.NewLineSent += NewLineSent;
// Start listening
_cmdMessenger.StartListening();
// Send command to start sending data
var command = new SendCommand((int)Command.StartLogging);
// Send command
_cmdMessenger.SendCommand(command);
// Wait for a little bit and clear the receive queue
Thread.Sleep(250);
_cmdMessenger.ClearReceiveQueue();
// Set initial goal temperature
GoalTemperature = 25;
}
// ------------------ MAIN ----------------------
// Setup function
public void Setup(ChartForm chartForm)
{
// getting the chart control on top of the chart form.
_chartForm = chartForm;
// Set up chart
_chartForm.SetupChart();
// Create Serial Port object
// Note that for some boards (e.g. Sparkfun Pro Micro) DtrEnable may need to be true.
_serialTransport = new SerialTransport
{
CurrentSerialSettings = { PortName = "COM6", BaudRate = 115200, DtrEnable = false } // object initializer
};
// Initialize the command messenger with the Serial Port transport layer
_cmdMessenger = new CmdMessenger(_serialTransport)
{
BoardType = BoardType.Bit16 // Set if it is communicating with a 16- or 32-bit Arduino board
};
// Tell CmdMessenger to "Invoke" commands on the thread running the WinForms UI
_cmdMessenger.SetControlToInvokeOn(chartForm);
// Set Received command strategy that removes commands that are older than 1 sec
_cmdMessenger.AddReceiveCommandStrategy(new StaleGeneralStrategy(1000));
// Attach the callbacks to the Command Messenger
AttachCommandCallBacks();
// Attach to NewLinesReceived for logging purposes
_cmdMessenger.NewLineReceived += NewLineReceived;
// Attach to NewLineSent for logging purposes
_cmdMessenger.NewLineSent += NewLineSent;
// Start listening
_cmdMessenger.StartListening();
// Send command to start sending data
var command = new SendCommand((int)Command.StartLogging);
// Send command
_cmdMessenger.SendCommand(command);
}
// ------------------ MAIN ----------------------
// Setup function
public void Setup(ChartForm chartForm)
{
// getting the chart control on top of the chart form.
_chartForm = chartForm;
// Set up chart
_chartForm.SetupChart();
// Create Serial Port object
_serialTransport = new SerialTransport
{
CurrentSerialSettings = { PortName = "COM6", BaudRate = 115200 } // object initializer
};
// Initialize the command messenger with the Serial Port transport layer
_cmdMessenger = new CmdMessenger(_serialTransport);
// Tell CmdMessenger to "Invoke" commands on the thread running the WinForms UI
_cmdMessenger.SetControlToInvokeOn(chartForm);
// Set Received command strategy that removes commands that are older than 1 sec
_cmdMessenger.AddReceiveCommandStrategy(new StaleGeneralStrategy(1000));
// Attach the callbacks to the Command Messenger
AttachCommandCallBacks();
// Attach to NewLinesReceived for logging purposes
_cmdMessenger.NewLineReceived += NewLineReceived;
// Attach to NewLineSent for logging purposes
_cmdMessenger.NewLineSent += NewLineSent;
// Start listening
_cmdMessenger.StartListening();
// Send command to start sending data
var command = new SendCommand((int)Command.StartLogging);
// Send command
_cmdMessenger.SendCommand(command);
}
// ------------------ MAIN ----------------------
// Setup function
public void Setup(ChartForm chartForm)
{
// getting the chart control on top of the chart form.
_chartForm = chartForm;
// Set up chart
_chartForm.SetupChart();
// Create Serial Port object
_serialPortManager = new SerialPortManager
{
CurrentSerialSettings = { PortName = "COM6", BaudRate = 115200 } // object initializer
};
_cmdMessenger = new CmdMessenger(_serialPortManager);
// Tell CmdMessenger to "Invoke" commands on the thread running the WinForms UI
_cmdMessenger.SetControlToInvokeOn(chartForm);
// Attach the callbacks to the Command Messenger
AttachCommandCallBacks();
// Attach to NewLineReceived for logging purposes
_cmdMessenger.NewLineReceived += NewLineReceived;
// Attach to NewLineSent for logging purposes
_cmdMessenger.NewLineSent += NewLineSent;
// Start listening
_cmdMessenger.StartListening();
// Send command to start sending data
var command = new SendCommand((int)Command.StartLogging);
// Send command
_cmdMessenger.SendCommand(command);
}
// ------------------ MAIN ----------------------
// Setup function
public void Setup(ControllerForm controllerForm)
{
// storing the controller form for later reference
_controllerForm = controllerForm;
// Create Serial Port object
// Note that for some boards (e.g. Sparkfun Pro Micro) DtrEnable may need to be true.
_serialTransport = new SerialTransport
{
CurrentSerialSettings = { PortName = "COM6", BaudRate = 115200, DtrEnable = false } // object initializer
};
// Initialize the command messenger with the Serial Port transport layer
_cmdMessenger = new CmdMessenger(_serialTransport)
{
BoardType = BoardType.Bit16 // Set if it is communicating with a 16- or 32-bit Arduino board
};
// Tell CmdMessenger to "Invoke" commands on the thread running the WinForms UI
_cmdMessenger.SetControlToInvokeOn(_controllerForm);
// Attach the callbacks to the Command Messenger
AttachCommandCallBacks();
// Attach to NewLinesReceived for logging purposes
_cmdMessenger.NewLineReceived += NewLineReceived;
// Attach to NewLineSent for logging purposes
_cmdMessenger.NewLineSent += NewLineSent;
// Start listening
_cmdMessenger.Connect();
_controllerForm.SetLedState(true);
_controllerForm.SetFrequency(2);
}
// Setup function
public void Setup(ChartForm chartForm)
{
// Choose which transport mode you want to use:
// 1. Serial port. This can be a real serial port but is usually a virtual serial port over USB.
// It can also be a virtual serial port over Bluetooth, but the direct bluetooth works better
// 2. Bluetooth This bypasses the Bluetooth virtual serial port, but communicates over the RFCOMM layer
var transportMode = TransportMode.Serial;
// getting the chart control on top of the chart form.
_chartForm = chartForm;
// Set up chart
_chartForm.SetupChart();
// Connect slider to GoalTemperatureChanged
GoalTemperatureChanged += () => _chartForm.GoalTemperatureTrackBarScroll(null, null);
// Set up transport
if (transportMode == TransportMode.Bluetooth)
{
_transport = new BluetoothTransport();
}
// We do not need to set the device: it will be found by the connection manager
else
{
_transport = new SerialTransport {
CurrentSerialSettings = { DtrEnable = false }
}
}; // some boards (e.g. Sparkfun Pro Micro) DtrEnable may need to be true.
// We do not need to set serial port and baud rate: it will be found by the connection manager
// Initialize the command messenger with the Serial Port transport layer
_cmdMessenger = new CmdMessenger(_transport)
{
BoardType = BoardType.Bit16, // Set if it is communicating with a 16- or 32-bit Arduino board
PrintLfCr = false // Do not print newLine at end of command, to reduce data being sent
};
// Tell CmdMessenger to "Invoke" commands on the thread running the WinForms UI
_cmdMessenger.SetControlToInvokeOn(chartForm);
// Set command strategy to continuously to remove all commands on the receive queue that
// are older than 1 sec. This makes sure that if data logging comes in faster that it can
// be plotted, the graph will not start lagging
_cmdMessenger.AddReceiveCommandStrategy(new StaleGeneralStrategy(1000));
// Attach the callbacks to the Command Messenger
AttachCommandCallBacks();
// Attach to NewLinesReceived for logging purposes
_cmdMessenger.NewLineReceived += NewLineReceived;
// Attach to NewLineSent for logging purposes
_cmdMessenger.NewLineSent += NewLineSent;
// Set up connection manager
if (transportMode == TransportMode.Bluetooth)
{
_connectionManager = new BluetoothConnectionManager((_transport as BluetoothTransport), _cmdMessenger, (int)Command.RequestId, (int)Command.SendId);
}
else
{
_connectionManager = new SerialConnectionManager((_transport as SerialTransport), _cmdMessenger, (int)Command.RequestId, (int)Command.SendId);
}
// Tell the Connection manager to "Invoke" commands on the thread running the WinForms UI
_connectionManager.SetControlToInvokeOn(chartForm);
// Event when the connection manager finds a connection
_connectionManager.ConnectionFound += ConnectionFound;
// Event when the connection manager watchdog notices that the connection is gone
_connectionManager.ConnectionTimeout += ConnectionTimeout;
// Event notifying on scanning process
_connectionManager.Progress += LogProgress;
// Initialize the application
InitializeTemperatureControl();
// Start scanning for ports/devices
_connectionManager.StartScan();
}