public void Synth(SectorSynthJob job)
{
//be lazy, just generate the whole sector unconditionally
//this is mostly based on mednafen's approach, which was probably finely tailored for PSX
//heres the comments on the subject:
// I'm not trusting that the "control" field for the TOC leadout entry will always be set properly, so | the control fields for the last track entry
// and the leadout entry together before extracting the D2 bit. Audio track->data leadout is fairly benign though maybe noisy(especially if we ever implement
// data scrambling properly), but data track->audio leadout could break things in an insidious manner for the more accurate drive emulation code).
var ses = job.Disc.Structure.Sessions[SessionNumber];
int lba_relative = job.LBA - ses.LeadoutTrack.LBA;
//data is zero
int ts = lba_relative;
int ats = job.LBA;
const int ADR = 0x1; // Q channel data encodes position
EControlQ control = ses.LeadoutTrack.Control;
//ehhh? CDI?
//if(toc.tracks[toc.last_track].valid)
// control |= toc.tracks[toc.last_track].control & 0x4;
//else if(toc.disc_type == DISC_TYPE_CD_I)
// control |= 0x4;
control |= (EControlQ)(((int)ses.LastInformationTrack.Control) & 4);
SubchannelQ sq = new SubchannelQ();
sq.SetStatus(ADR, control);
sq.q_tno.BCDValue = 0xAA;
sq.q_index.BCDValue = 0x01;
sq.Timestamp = ts;
sq.AP_Timestamp = ats;
sq.zero = 0;
//finally, rely on a gap sector to do the heavy lifting to synthesize this
CUE.CueTrackType TrackType = CUE.CueTrackType.Audio;
if (ses.LeadoutTrack.IsData)
{
if (job.Disc.TOC.Session1Format == SessionFormat.Type20_CDXA || job.Disc.TOC.Session1Format == SessionFormat.Type10_CDI)
{
TrackType = CUE.CueTrackType.Mode2_2352;
}
else
{
TrackType = CUE.CueTrackType.Mode1_2352;
}
}
CUE.SS_Gap ss_gap = new CUE.SS_Gap()
{
Policy = Policy,
sq = sq,
TrackType = TrackType,
Pause = true //?
};
ss_gap.Synth(job);
}
/// <exception cref="MDSParseException">no file found at <paramref name="mdsPath"/> or BLOB error</exception>
public Disc LoadMDSToDisc(string mdsPath, DiscMountPolicy IN_DiscMountPolicy)
{
var loadResults = LoadMDSPath(mdsPath);
if (!loadResults.Valid)
{
throw loadResults.FailureException;
}
Disc disc = new Disc();
// load all blobs
Dictionary <int, IBlob> BlobIndex = MountBlobs(loadResults.ParsedMDSFile, disc);
var mdsf = loadResults.ParsedMDSFile;
//generate DiscTOCRaw items from the ones specified in the MDS file
disc.RawTOCEntries = new List <RawTOCEntry>();
foreach (var entry in mdsf.TOCEntries)
{
disc.RawTOCEntries.Add(EmitRawTOCEntry(entry));
}
//analyze the RAWTocEntries to figure out what type of track track 1 is
var tocSynth = new Synthesize_DiscTOC_From_RawTOCEntries_Job(disc.RawTOCEntries);
tocSynth.Run();
// now build the sectors
int currBlobIndex = 0;
foreach (var session in mdsf.ParsedSession)
{
for (int i = session.StartTrack; i <= session.EndTrack; i++)
{
int relMSF = -1;
var track = mdsf.TOCEntries.FirstOrDefault(t => t.Point == i);
if (track == null)
{
break;
}
// ignore the info entries
if (track.Point == 0xA0 ||
track.Point == 0xA1 ||
track.Point == 0xA2)
{
continue;
}
// get the blob(s) for this track
// it's probably a safe assumption that there will be only one blob per track, but I'm still not 100% sure on this
var tr = mdsf.TOCEntries.FirstOrDefault(a => a.Point == i) ?? throw new MDSParseException("BLOB Error!");
#if true
if (tr.ImageFileNamePaths.Count == 0)
{
throw new MDSParseException("BLOB Error!");
}
#else // this is the worst use of lists and LINQ I've seen in this god-forsaken codebase, I hope for all our sakes that it's not a workaround for some race condition --yoshi
List <string> blobstrings = new List <string>();
foreach (var t in tr.ImageFileNamePaths)
{
if (!blobstrings.Contains(t))
{
blobstrings.Add(t);
}
}
var tBlobs = (from a in tr.ImageFileNamePaths
select a).ToList();
if (tBlobs.Count < 1)
{
throw new MDSParseException("BLOB Error!");
}
// is the currBlob valid for this track, or do we need to increment?
string bString = tBlobs.First();
#endif
IBlob mdfBlob = null;
// check for track pregap and create if necessary
// this is specified in the track extras block
if (track.ExtraBlock.Pregap > 0)
{
CUE.CueTrackType pregapTrackType = CUE.CueTrackType.Audio;
if (tocSynth.Result.TOCItems[1].IsData)
{
if (tocSynth.Result.Session1Format == SessionFormat.Type20_CDXA)
{
pregapTrackType = CUE.CueTrackType.Mode2_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type10_CDI)
{
pregapTrackType = CUE.CueTrackType.CDI_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type00_CDROM_CDDA)
{
pregapTrackType = CUE.CueTrackType.Mode1_2352;
}
}
for (int pre = 0; pre < track.ExtraBlock.Pregap; pre++)
{
relMSF++;
var ss_gap = new CUE.SS_Gap()
{
Policy = IN_DiscMountPolicy,
TrackType = pregapTrackType
};
disc._Sectors.Add(ss_gap);
int qRelMSF = pre - Convert.ToInt32(track.ExtraBlock.Pregap);
//tweak relMSF due to ambiguity/contradiction in yellowbook docs
if (!IN_DiscMountPolicy.CUE_PregapContradictionModeA)
{
qRelMSF++;
}
//setup subQ
byte ADR = 1; //absent some kind of policy for how to set it, this is a safe assumption:
ss_gap.sq.SetStatus(ADR, tocSynth.Result.TOCItems[1].Control);
ss_gap.sq.q_tno = BCD2.FromDecimal(1);
ss_gap.sq.q_index = BCD2.FromDecimal(0);
ss_gap.sq.AP_Timestamp = pre;
ss_gap.sq.Timestamp = qRelMSF;
//setup subP
ss_gap.Pause = true;
}
// pregap processing completed
}
// create track sectors
long currBlobOffset = track.TrackOffset;
for (long sector = session.StartSector; sector <= session.EndSector; sector++)
{
CUE.SS_Base sBase = null;
// get the current blob from the BlobIndex
Blob_RawFile currBlob = (Blob_RawFile)BlobIndex[currBlobIndex];
long currBlobLength = currBlob.Length;
long currBlobPosition = sector;
if (currBlobPosition == currBlobLength)
{
currBlobIndex++;
}
mdfBlob = disc.DisposableResources[currBlobIndex] as Blob_RawFile;
//int userSector = 2048;
switch (track.SectorSize)
{
case 2448:
sBase = new CUE.SS_2352()
{
Policy = IN_DiscMountPolicy
};
//userSector = 2352;
break;
case 2048:
default:
sBase = new CUE.SS_Mode1_2048()
{
Policy = IN_DiscMountPolicy
};
//userSector = 2048;
break;
//throw new Exception($"Not supported: Sector Size {track.SectorSize}");
}
// configure blob
sBase.Blob = mdfBlob;
sBase.BlobOffset = currBlobOffset;
currBlobOffset += track.SectorSize; // userSector;
// add subchannel data
relMSF++;
BCD2 tno, ino;
//this should actually be zero. im not sure if this is stored as BCD2 or not
tno = BCD2.FromDecimal(track.TrackNo);
//these are special values.. I think, taken from this:
//http://www.staff.uni-mainz.de/tacke/scsi/SCSI2-14.html
//the CCD will contain Points as decimal values except for these specially converted decimal values which should stay as BCD.
//Why couldn't they all be BCD? I don't know. I guess because BCD is inconvenient, but only A0 and friends have special meaning. It's confusing.
ino = BCD2.FromDecimal(track.Point);
if (track.Point == 0xA0)
{
ino.BCDValue = 0xA0;
}
else if (track.Point == 0xA1)
{
ino.BCDValue = 0xA1;
}
else if (track.Point == 0xA2)
{
ino.BCDValue = 0xA2;
}
// get ADR & Control from ADR_Control byte
byte adrc = Convert.ToByte(track.ADR_Control);
var Control = adrc & 0x0F;
var ADR = adrc >> 4;
var q = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(ADR, (EControlQ)(Control & 0xF)),
q_tno = BCD2.FromDecimal(track.Point),
q_index = ino,
AP_Timestamp = disc._Sectors.Count,
Timestamp = relMSF - Convert.ToInt32(track.ExtraBlock.Pregap)
};
sBase.sq = q;
disc._Sectors.Add(sBase);
}
}
}
return(disc);
}
/// <exception cref="CCDParseException">file <paramref name="ccdPath"/> not found, nonexistent IMG file, nonexistent SUB file, IMG or SUB file not multiple of <c>2352 B</c>, or IMG and SUB files differ in length</exception>
public Disc LoadCCDToDisc(string ccdPath, DiscMountPolicy IN_DiscMountPolicy)
{
var loadResults = LoadCCDPath(ccdPath);
if (!loadResults.Valid)
{
throw loadResults.FailureException;
}
Disc disc = new Disc();
IBlob imgBlob = null, subBlob = null;
long imgLen = -1, subLen;
//mount the IMG file
//first check for a .ecm in place of the img
var imgPath = loadResults.ImgPath;
if (!File.Exists(imgPath))
{
var ecmPath = Path.ChangeExtension(imgPath, ".img.ecm");
if (File.Exists(ecmPath))
{
if (Disc.Blob_ECM.IsECM(ecmPath))
{
var ecm = new Disc.Blob_ECM();
ecm.Load(ecmPath);
imgBlob = ecm;
imgLen = ecm.Length;
}
}
}
if (imgBlob == null)
{
if (!File.Exists(loadResults.ImgPath))
{
throw new CCDParseException("Malformed CCD format: nonexistent IMG file!");
}
var imgFile = new Disc.Blob_RawFile()
{
PhysicalPath = loadResults.ImgPath
};
imgLen = imgFile.Length;
imgBlob = imgFile;
}
disc.DisposableResources.Add(imgBlob);
//mount the SUB file
if (!File.Exists(loadResults.SubPath))
{
throw new CCDParseException("Malformed CCD format: nonexistent SUB file!");
}
var subFile = new Disc.Blob_RawFile()
{
PhysicalPath = loadResults.SubPath
};
subBlob = subFile;
disc.DisposableResources.Add(subBlob);
subLen = subFile.Length;
//quick integrity check of file sizes
if (imgLen % 2352 != 0)
{
throw new CCDParseException("Malformed CCD format: IMG file length not multiple of 2352");
}
int NumImgSectors = (int)(imgLen / 2352);
if (subLen != NumImgSectors * 96)
{
throw new CCDParseException("Malformed CCD format: SUB file length not matching IMG");
}
var ccdf = loadResults.ParsedCCDFile;
//the only instance of a sector synthesizer we'll need
SS_CCD synth = new SS_CCD();
//generate DiscTOCRaw items from the ones specified in the CCD file
//TODO - range validate these (too many truncations to byte)
disc.RawTOCEntries = new List <RawTOCEntry>();
foreach (var entry in ccdf.TOCEntries)
{
BCD2 tno, ino;
//this should actually be zero. im not sure if this is stored as BCD2 or not
tno = BCD2.FromDecimal(entry.TrackNo);
//these are special values.. I think, taken from this:
//http://www.staff.uni-mainz.de/tacke/scsi/SCSI2-14.html
//the CCD will contain Points as decimal values except for these specially converted decimal values which should stay as BCD.
//Why couldn't they all be BCD? I don't know. I guess because BCD is inconvenient, but only A0 and friends have special meaning. It's confusing.
ino = BCD2.FromDecimal(entry.Point);
if (entry.Point == 0xA0)
{
ino.BCDValue = 0xA0;
}
else if (entry.Point == 0xA1)
{
ino.BCDValue = 0xA1;
}
else if (entry.Point == 0xA2)
{
ino.BCDValue = 0xA2;
}
var q = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(entry.ADR, (EControlQ)(entry.Control & 0xF)),
q_tno = tno,
q_index = ino,
min = BCD2.FromDecimal(entry.AMin),
sec = BCD2.FromDecimal(entry.ASec),
frame = BCD2.FromDecimal(entry.AFrame),
zero = (byte)entry.Zero,
ap_min = BCD2.FromDecimal(entry.PMin),
ap_sec = BCD2.FromDecimal(entry.PSec),
ap_frame = BCD2.FromDecimal(entry.PFrame),
q_crc = 0, //meaningless
};
disc.RawTOCEntries.Add(new RawTOCEntry {
QData = q
});
}
//analyze the RAWTocEntries to figure out what type of track track 1 is
var tocSynth = new Synthesize_DiscTOC_From_RawTOCEntries_Job()
{
Entries = disc.RawTOCEntries
};
tocSynth.Run();
//Add sectors for the mandatory track 1 pregap, which isn't stored in the CCD file
//We reuse some CUE code for this.
//If we load other formats later we might should abstract this even further (to a synthesizer job)
//It can't really be abstracted from cue files though due to the necessity of merging this with other track 1 pregaps
CUE.CueTrackType pregapTrackType = CUE.CueTrackType.Audio;
if (tocSynth.Result.TOCItems[1].IsData)
{
if (tocSynth.Result.Session1Format == SessionFormat.Type20_CDXA)
{
pregapTrackType = CUE.CueTrackType.Mode2_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type10_CDI)
{
pregapTrackType = CUE.CueTrackType.CDI_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type00_CDROM_CDDA)
{
pregapTrackType = CUE.CueTrackType.Mode1_2352;
}
}
for (int i = 0; i < 150; i++)
{
var ss_gap = new CUE.SS_Gap()
{
Policy = IN_DiscMountPolicy,
TrackType = pregapTrackType
};
disc._Sectors.Add(ss_gap);
int qRelMSF = i - 150;
//tweak relMSF due to ambiguity/contradiction in yellowbook docs
if (!IN_DiscMountPolicy.CUE_PregapContradictionModeA)
{
qRelMSF++;
}
//setup subQ
byte ADR = 1; //absent some kind of policy for how to set it, this is a safe assumption:
ss_gap.sq.SetStatus(ADR, tocSynth.Result.TOCItems[1].Control);
ss_gap.sq.q_tno = BCD2.FromDecimal(1);
ss_gap.sq.q_index = BCD2.FromDecimal(0);
ss_gap.sq.AP_Timestamp = i;
ss_gap.sq.Timestamp = qRelMSF;
//setup subP
ss_gap.Pause = true;
}
//build the sectors:
//set up as many sectors as we have img/sub for, even if the TOC doesnt reference them
//(the TOC is unreliable, and the Track records are redundant)
for (int i = 0; i < NumImgSectors; i++)
{
disc._Sectors.Add(synth);
}
return(disc);
}
