/// <summary>
/// 判断右侧的零部件;
/// </summary>
/// <param name="mrPart"></param>
private void JudgeRightPart(CMrPart mrPart)
{
double minX = mrPart.GetMinXPoint().X;
double maxX = mrPart.GetMinXPoint().X;
double minY = mrPart.GetMinYPoint().Y;
double maxY = mrPart.GetMaxYPoint().Y;
if (maxX < 0 || minY > 0 || maxY < 0)
{
return;
}
if (mRightPart == null)
{
mRightPart = mrPart;
return;
}
if (Math.Abs(maxX - minX) > 50)
{
return;
}
double rightPartMaxX = mRightPart.GetMaxXPoint().X;
if (rightPartMaxX > maxX)
{
mRightPart = mrPart;
}
}
/// <summary>
/// 判断左侧的零部件;
/// </summary>
/// <param name="mrPart"></param>
private void JudgeLeftPart(CMrPart mrPart)
{
double minX = mrPart.GetMinXPoint().X;
double maxX = mrPart.GetMaxXPoint().X;
double minY = mrPart.GetMinYPoint().Y;
double maxY = mrPart.GetMaxYPoint().Y;
if (minX > 0 || minY > 0 || maxY < 0)
{
return;
}
if (mLeftPart == null)
{
mLeftPart = mrPart;
return;
}
if (Math.Abs(maxX - minX) > 50)
{
return;
}
double leftPartMinX = mLeftPart.GetMinXPoint().X;
if (leftPartMinX < minX)
{
mLeftPart = mrPart;
}
}
/// <summary>
/// 判断是否是中间的板状零件;
/// </summary>
/// <param name="mrPart"></param>
/// <returns></returns>
private bool IsMidPlate(CMrPart mrPart)
{
Vector normal = mrPart.mNormal;
if (!CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(0, 0, 1)))
{
return(false);
}
if (!mrPart.IsHaveBolt())
{
return(false);
}
double minX = mrPart.GetMinXPoint().X;
double maxX = mrPart.GetMaxXPoint().X;
double minY = mrPart.GetMinYPoint().Y;
double maxY = mrPart.GetMaxYPoint().Y;
if (minX < 0 && maxX > 0 && minY < 0 && maxY > 0)
{
return(true);
}
return(false);
}
/// <summary>
/// 判断右侧的零部件是否需要标注;
/// </summary>
/// <param name="mrPart"></param>
/// <returns></returns>
private bool IsRightPartNeedDim(CMrPart mrPart)
{
double minX = mrPart.GetMinXPoint().X;
double maxX = mrPart.GetMaxXPoint().X;
double rightPartMaxX = mRightPart.GetMaxXPoint().X;
double rightPartMinX = mRightPart.GetMinXPoint().X;
if (CDimTools.GetInstance().CompareTwoDoubleValue(maxX, rightPartMaxX) == 0 ||
CDimTools.GetInstance().CompareTwoDoubleValue(minX, rightPartMinX) == 0 ||
CDimTools.GetInstance().CompareTwoDoubleValue(maxX, rightPartMinX) == 0)
{
return(false);
}
if (CDimTools.GetInstance().CompareTwoDoubleValue(minX, rightPartMinX) >= 0 &&
CDimTools.GetInstance().CompareTwoDoubleValue(maxX, rightPartMaxX) <= 0)
{
return(false);
}
if (!CDimTools.GetInstance().IsTwoVectorParallel(mLeftPart.mNormal, new Vector(1, 0, 0)))
{
return(false);
}
return(true);
}
/// <summary>
/// 判断是否需要向下标注;
/// </summary>
/// <returns></returns>
private bool IsNeedDownDim(CMrPart mrPart)
{
Vector normal = mrPart.mNormal;
Vector zVector = new Vector(0, 0, 1);
if (!CDimTools.GetInstance().IsTwoVectorParallel(normal, zVector) || !mrPart.IsHaveBolt())
{
return(false);
}
double minY = mrPart.GetMinYPoint().Y;
double maxY = mrPart.GetMaxYPoint().Y;
double minX = mrPart.GetMinXPoint().X;
double maxX = mrPart.GetMaxXPoint().X;
// if (minY < 0 && maxY > 0 && minX < 0 && maxX > 0)
// {
// return true;
// }
if (maxY < 0)
{
return(true);
}
return(false);
}
/// <summary>
/// 获取左侧檩托板的标注集;
/// </summary>
/// <param name="nFlag">1:左侧;2:右侧</param>
/// <returns></returns>
private List <CMrDimSet> GetMrApronPlateDimSet(int nFlag)
{
List <CMrDimSet> mrDimSetList = new List <CMrDimSet>();
Dictionary <CMrPart, CMrApronPlate> mMapPartToApronPlate = CMrCylinderDoorTopManager.GetInstance().mMapYNormalPartToMrApronPlate;
//如果是右侧;
if (nFlag == 2)
{
foreach (CMrApronPlate mrApronPlate in mMapPartToApronPlate.Values)
{
CMrPart yNormalPart = mrApronPlate.mYNormalPart;
double minX = yNormalPart.GetMinXPoint().X;
if (minX < 0)
{
continue;
}
CMrDimSet mrDimSet = new CMrDimSet();
bool bIsUp = mrApronPlate.mIsUp;
if (bIsUp)
{
mrDimSet.AddPoint(yNormalPart.GetMaxXMinYPoint());
}
else
{
mrDimSet.AddPoint(yNormalPart.GetMaxXMaxYPoint());
}
mrDimSetList.Add(mrDimSet);
}
}
//如果是左侧;
else if (nFlag == 1)
{
foreach (CMrApronPlate mrApronPlate in mMapPartToApronPlate.Values)
{
CMrPart yNormalPart = mrApronPlate.mYNormalPart;
double maxX = yNormalPart.GetMaxXPoint().X;
if (maxX > 0)
{
continue;
}
CMrDimSet mrDimSet = new CMrDimSet();
bool bIsUp = mrApronPlate.mIsUp;
if (bIsUp)
{
mrDimSet.AddPoint(yNormalPart.GetMinXMinYPoint());
}
else
{
mrDimSet.AddPoint(yNormalPart.GetMinXMaxYPoint());
}
mrDimSetList.Add(mrDimSet);
}
}
return(mrDimSetList);
}
/// <summary>
/// 获得支撑及牛腿中间的垂直加筋板;
/// </summary>
/// <param name="mrSupportPlate"></param>
/// <returns></returns>
private List <CMrPart> GetSupportPlateMiddleConnectPlates(CMrPart mrSupportPlate)
{
Point maxXPoint = mrSupportPlate.GetMaxXPoint();
Point minXPoint = mrSupportPlate.GetMinXPoint();
List <CMrPart> mrConnectPlates = new List <CMrPart>();
if (maxXPoint.X < 0)
{
foreach (CMrPart mrPart in mVerticalConnectPlateList)
{
if (IsOutsidePlate(mrPart) || mrPart.GetMaxXPoint().X > 0)
{
continue;
}
if (CDimTools.GetInstance().IsPartInOtherPartBox(mrPart, mrSupportPlate))
{
mrConnectPlates.Add(mrPart);
}
}
return(mrConnectPlates);
}
else if (minXPoint.X > 0)
{
foreach (CMrPart mrPart in mVerticalConnectPlateList)
{
if (IsOutsidePlate(mrPart) || mrPart.GetMinXPoint().X < 0)
{
continue;
}
if (CDimTools.GetInstance().IsPartInOtherPartBox(mrPart, mrSupportPlate))
{
mrConnectPlates.Add(mrPart);
}
}
return(mrConnectPlates);
}
return(null);
}
/// <summary>
/// 判断主梁的螺钉是否在该平板内;
/// </summary>
private bool JudgeMainBeamBoltInPlate(CMrPart mrPart)
{
List <CMrBoltArray> mrBoltArrayList = CMrMainBeam.GetInstance().GetBoltArrayList();
double minX = mrPart.GetMinXPoint().X;
double maxX = mrPart.GetMaxXPoint().X;
double minY = mrPart.GetMinYPoint().Y;
double maxY = mrPart.GetMaxYPoint().Y;
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
List <Point> pointList = mrBoltArray.GetBoltPointList();
foreach (Point pt in pointList)
{
if (pt.X < maxX && pt.X > minX && pt.Y < maxY && pt.Y > minY)
{
return(true);
}
}
}
return(false);
}
/// <summary>
/// 构建所有需要进行打剖面的零部件;
/// </summary>
private void BuildNeedSectionPartList()
{
CMrPart mainBeam = CMrMainBeam.GetInstance();
double mainBeamMinY = mainBeam.GetMinYPoint().Y;
double mainBeamMaxY = mainBeam.GetMaxYPoint().Y;
double mainBeamMinX = mainBeam.GetMinXPoint().X;
double mainBeamMaxX = mainBeam.GetMaxXPoint().X;
foreach (CMrPart mrPart in mrPartList)
{
Vector normal = mrPart.mNormal;
if (CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(0, 1, 0)))
{
if (!mrPart.IsHaveBolt())
{
continue;
}
double partMinX = mrPart.GetMinXPoint().X;
double partMaxX = mrPart.GetMaxXPoint().X;
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMaxX, mainBeamMinX) <= 0 ||
CDimTools.GetInstance().CompareTwoDoubleValue(partMinX, mainBeamMaxX) >= 0)
{
continue;
}
mAllSectionPartList.Add(mrPart);
}
else if (CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(1, 0, 0)))
{
if (!mrPart.IsHaveBolt())
{
continue;
}
double partMinX = mrPart.GetMinXPoint().X;
double partMaxX = mrPart.GetMaxXPoint().X;
double partMinY = mrPart.GetMinYPoint().Y;
double partMaxY = mrPart.GetMaxYPoint().Y;
//过滤掉双夹板;
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMinY, mainBeamMinY) < 0 &&
CDimTools.GetInstance().CompareTwoDoubleValue(partMaxY, mainBeamMinY) > 0)
{
continue;
}
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMinY, mainBeamMaxY) < 0 &&
CDimTools.GetInstance().CompareTwoDoubleValue(partMaxY, mainBeamMaxY) > 0)
{
continue;
}
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMaxX, mainBeamMinX) <= 0 ||
CDimTools.GetInstance().CompareTwoDoubleValue(partMinX, mainBeamMaxX) >= 0)
{
mAllSectionPartList.Add(mrPart);
}
}
else if (CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(0, 0, 1)))
{
if (mrPart.IsHaveBolt())
{
double partMinX = mrPart.GetMinXPoint().X;
double partMaxX = mrPart.GetMaxXPoint().X;
double partMinY = mrPart.GetMinYPoint().Y;
double partMaxY = mrPart.GetMaxYPoint().Y;
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMinX, mainBeamMaxX) >= 0 ||
CDimTools.GetInstance().CompareTwoDoubleValue(partMaxX, mainBeamMinX) <= 0)
{
mAllSectionPartList.Add(mrPart);
}
}
else //判断是否是底板零部件,底板零部件默认加入到链表中;
{
double partMinX = mrPart.GetMinXPoint().X;
double partMaxX = mrPart.GetMaxXPoint().X;
double partMaxY = mrPart.GetMaxYPoint().Y;
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMaxY, mainBeamMinY) == 0 &&
partMinX < mainBeamMinX && partMaxX > mainBeamMaxX)
{
mAllSectionPartList.Add(mrPart);
}
}
}
}
}
/// <summary>
/// 创建水平方向的剖面;
/// </summary>
/// <param name="mrSection"></param>
private void CreateVerticalMiddleSection(CMrSection mrSection, CMrPart mrPart)
{
//判断是否需要创建该剖面或者只是添加零件标记;
CMrSection mrSameSection = null;
View.ViewAttributes viewAttributes = new View.ViewAttributes();
viewAttributes.LoadAttributes(CCommonPara.mSectionAttPath);
SectionMarkBase.SectionMarkAttributes sectionMarkAttributes = new SectionMarkBase.SectionMarkAttributes();
sectionMarkAttributes.LoadAttributes(CCommonPara.mSectionMarkNotePath);
View sectionView = null;
SectionMark setionMark = null;
double dblX = 50;
CMrPart mTopBeam = CMrBeamDoorManager.GetInstance().mTopBeam;
Point tBLeftTopPt = mTopBeam.mLeftTopPoint;
Point tBRightTopPt = mTopBeam.mRightTopPoint;
Point midMaxYPt = CMrBeamDoorManager.GetInstance().mMidMaxPoint;
Vector leftDirectVector = new Vector(midMaxYPt.X - tBLeftTopPt.X, midMaxYPt.Y - tBLeftTopPt.Y, 0);
Vector rightDirectVector = new Vector(midMaxYPt.X - tBRightTopPt.X, midMaxYPt.Y - tBRightTopPt.Y, 0);
Point leftTopPt = null;
Point rightTopPt = null;
if (CDimTools.GetInstance().IsTwoVectorParallel(mrPart.mNormal, new Vector(0, 1, 0)))
{
leftTopPt = mrPart.GetMinXMaxYPoint();
rightTopPt = mrPart.GetMaxXMaxYPoint();
}
else if (CDimTools.GetInstance().JudgeLineSlope(new Point(0, 0, 0), leftDirectVector) == MrSlopeType.MORETHAN_ZERO ||
CDimTools.GetInstance().JudgeLineSlope(new Point(0, 0, 0), rightDirectVector) == MrSlopeType.MORETHAN_ZERO)
{
leftTopPt = mrPart.GetMinXPoint();
rightTopPt = mrPart.GetMaxYPoint();
}
else if (CDimTools.GetInstance().JudgeLineSlope(new Point(0, 0, 0), leftDirectVector) == MrSlopeType.LESSTHAN_ZERO ||
CDimTools.GetInstance().JudgeLineSlope(new Point(0, 0, 0), rightDirectVector) == MrSlopeType.LESSTHAN_ZERO)
{
leftTopPt = mrPart.GetMaxYPoint();
rightTopPt = mrPart.GetMaxXPoint();
}
Point newPt = new Point(rightTopPt.X + dblX, rightTopPt.Y, 0);
Point startPt = CDimTools.GetInstance().ComputeFootPointToLine(newPt, leftTopPt, rightTopPt);
newPt = new Point(leftTopPt.X - dblX, leftTopPt.Y, 0);
Point endPt = CDimTools.GetInstance().ComputeFootPointToLine(newPt, leftTopPt, rightTopPt);
if (CCommonPara.mVerticalSection == MrSectionOrientation.MrSectionDown)
{
Point tempPt = startPt;
startPt = endPt;
endPt = startPt;
}
bool bNeedCreateView = IsTheSectionNeedCreateView(mrSection, ref mrSameSection);
if (bNeedCreateView)
{
mSectionMarkIndex++;
mrSection.mSectionMark = mSectionMarkArray[mSectionMarkIndex];
View.CreateSectionView(mFrontView, startPt, endPt, new Point(0, 0, 0), CCommonPara.mDblSectionUpDepth
, CCommonPara.mDblSectionDownDepth, viewAttributes, sectionMarkAttributes, out sectionView, out setionMark);
}
}
/// <summary>
/// 构建需要进行剖视的零部件;
/// </summary>
private void BuildNeedSectionPartList()
{
CMrPart mainBeam = CMrMainBeam.GetInstance();
double mainBeamMinY = mainBeam.GetMinYPoint().Y;
double mainBeamMaxY = mainBeam.GetMaxYPoint().Y;
double mainBeamMinX = mainBeam.GetMinXPoint().X;
double mainBeamMaxX = mainBeam.GetMaxXPoint().X;
CMrPart leftPart = CMrCylinderDoorFrontManager.GetInstance().mLeftPart;
CMrPart leftMiddlePart = CMrCylinderDoorFrontManager.GetInstance().mLeftTopMiddlePart;
CMrPart leftTopPart = CMrCylinderDoorFrontManager.GetInstance().mLeftTopPart;
CMrPart rightPart = CMrCylinderDoorFrontManager.GetInstance().mRightPart;
CMrPart rightMiddlePart = CMrCylinderDoorFrontManager.GetInstance().mRightTopMiddlePart;
CMrPart rightTopPart = CMrCylinderDoorFrontManager.GetInstance().mRightTopPart;
mrPartList.Remove(leftPart);
mrPartList.Remove(leftMiddlePart);
mrPartList.Remove(rightPart);
mrPartList.Remove(rightMiddlePart);
foreach (CMrPart mrPart in mrPartList)
{
double partMinX = mrPart.GetMinXPoint().X;
double partMaxX = mrPart.GetMaxXPoint().X;
double partMaxY = mrPart.GetMaxYPoint().Y;
double partMinY = mrPart.GetMinYPoint().Y;
if (!mrPart.IsHaveBolt())
{
continue;
}
Vector normal = mrPart.mNormal;
//如果法向量与X轴平行;
if (CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(1, 0, 0)))
{
if (mrPart == leftTopPart || mrPart == rightTopPart)
{
mAllSectionPartList.Add(mrPart);
}
//1.如果竖直的板在柱子中间;
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMinX, mainBeamMinX) > 0 &&
CDimTools.GetInstance().CompareTwoDoubleValue(partMaxX, mainBeamMaxX) < 0)
{
mAllSectionPartList.Add(mrPart);
}
//2.如果竖直的板在主梁侧板的外侧;
if (leftPart != null && CDimTools.GetInstance().CompareTwoDoubleValue(partMaxX, leftPart.GetMinXPoint().X) < 0)
{
mAllSectionPartList.Add(mrPart);
}
if (rightPart != null && CDimTools.GetInstance().CompareTwoDoubleValue(partMinX, rightPart.GetMaxXPoint().X) > 0)
{
mAllSectionPartList.Add(mrPart);
}
}
//如果法向量与Y轴平行;
else if (CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(0, 1, 0)))
{
//如果是檩托板中的零部件则返回;
if (CMrCylinderDoorFrontManager.GetInstance().FindMrApronPlateByYNormalPart(mrPart) != null)
{
continue;
}
//如果是底板;
if (CDimTools.GetInstance().CompareTwoDoubleValue(mainBeamMinY, partMaxY) == 0)
{
mAllSectionPartList.Add(mrPart);
}
//如果是顶板;
if (CDimTools.GetInstance().CompareTwoDoubleValue(mainBeamMaxY, partMinY) == 0)
{
mAllSectionPartList.Add(mrPart);
}
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMinX, mainBeamMaxX) > 0 ||
CDimTools.GetInstance().CompareTwoDoubleValue(partMaxX, mainBeamMinX) < 0)
{
mAllSectionPartList.Add(mrPart);
}
if (CDimTools.GetInstance().CompareTwoDoubleValue(partMinX, mainBeamMinX) > 0 ||
CDimTools.GetInstance().CompareTwoDoubleValue(partMaxX, mainBeamMaxX) < 0)
{
mAllSectionPartList.Add(mrPart);
}
}
}
//1.把类型1中檩托板的任意一块板加进来;
CMrApronPlate mrApronPlate = CMrCylinderDoorFrontManager.GetInstance().GetFirstMrApronPlateType1();
if (mrApronPlate != null)
{
mAllSectionPartList.Add(mrApronPlate.mYNormalPart);
}
}
/// <summary>
/// 绘制上侧的零部件标注;
/// </summary>
private void DrawYVectorUpDim()
{
List <Point> pointList = new List <Point>();
bool bNeedAddLeftPart = true;
bool bNeedAddRightPart = true;
foreach (CMrPart mrPart in mMrPartList)
{
double minY = mrPart.GetMinYPoint().Y;
double maxY = mrPart.GetMaxYPoint().Y;
if (minY < 0 && maxY < 0)
{
continue;
}
Vector normal = mrPart.mNormal;
//1.先判断螺钉的标注;
List <CMrBoltArray> mrBoltArrayList = mrPart.GetBoltArrayList();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
if (!CDimTools.GetInstance().IsTwoVectorParallel(mrBoltArray.mNormal, new Vector(0, 0, 01)))
{
continue;
}
List <Point> maxYPointList = mrBoltArray.GetMaxYPointList();
pointList.AddRange(maxYPointList);
//把该螺钉组添加到映射表中;
mDicBoltArrayToUpDim.Add(mrBoltArray, true);
}
//2.如果法向与Y轴平行;
if (CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(1, 0, 0)))
{
if (mrPart.GetMaxXPoint().X < mLeftPart.GetMaxXPoint().X || mrPart.GetMinXPoint().X > mRightPart.GetMinXPoint().X)
{
continue;
}
if (!IsLeftPartNeedDim(mrPart))
{
bNeedAddLeftPart = false;
pointList.Add(mrPart.GetMaxYMaxXPoint());
}
else if (!IsRightPartNeedDim(mrPart))
{
bNeedAddRightPart = false;
pointList.Add(mrPart.GetMaxYMinXPoint());
}
else
{
pointList.Add(mrPart.GetMaxYMinXPoint());
}
}
if (IsMidPlate(mrPart))
{
pointList.Add(mrPart.GetMaxYMinXPoint());
pointList.Add(mrPart.GetMaxYMaxXPoint());
}
}
if (pointList.Count == 0)
{
return;
}
if (mLeftPart != null && bNeedAddLeftPart)
{
pointList.Add(mLeftPart.GetMaxYMinXPoint());
}
if (mRightPart != null && bNeedAddRightPart)
{
pointList.Add(mRightPart.GetMaxYMaxXPoint());
}
Comparison <Point> sorterX = new Comparison <Point>(CDimTools.ComparePointX);
pointList.Sort(sorterX);
PointList dimPointList = new PointList();
foreach (Point pt in pointList)
{
dimPointList.Add(pt);
}
Vector dimVector = new Vector(0, 1, 0);
double dimDistance = Math.Abs(CCommonPara.mViewMaxY - pointList[0].Y) + 0.6 * CCommonPara.mDefaultDimDistance;
CDimTools.GetInstance().DrawDimensionSet(mViewBase, dimPointList, dimVector, dimDistance, CCommonPara.mSizeDimPath);
}
/// <summary>
/// 绘制主梁上螺钉的标注，需要判断螺钉与主梁顶部的距离，如果距离超过一定的阈值只进行单独标注;
/// </summary>
private void DrawMainBeamBoltDim()
{
CMrPart mrLeftPart = CMrCylinderDoorFrontManager.GetInstance().mLeftPart;
CMrPart mrRightPart = CMrCylinderDoorFrontManager.GetInstance().mRightPart;
List <CMrBoltArray> mrBoltArrayList = mMainBeam.GetBoltArrayList();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
Vector normal = mrBoltArray.mNormal;
if (!CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(0, 0, 1)))
{
continue;
}
double distance = Math.Abs(mrBoltArray.GetMaxYPoint().Y - mMainBeam.GetMaxYPoint().Y);
if (distance < 200)
{
//1.标注螺钉组的上侧标注;
PointList pointList = new PointList();
foreach (Point point in mrBoltArray.GetMaxYPointList())
{
pointList.Add(point);
}
pointList.Add(mrRightPart.GetMaxXMaxYPoint());
pointList.Add(mrLeftPart.GetMinXMaxYPoint());
double dimDistance = Math.Abs(mMainBeam.GetMaxYPoint().Y - pointList[0].Y) + CCommonPara.mDefaultDimDistance;
Vector dimVector = new Vector(0, 1, 0);
CDimTools.GetInstance().DrawDimensionSet(mViewBase, pointList, dimVector, dimDistance, CCommonPara.mSizeDimPath);
}
else
{
//1.标注螺钉组的上侧标注;
PointList pointList = new PointList();
foreach (Point point in mrBoltArray.GetMaxYPointList())
{
pointList.Add(point);
}
Point boltMaxYPt = mrBoltArray.GetMaxYPoint();
Vector leftPartNormal = mrLeftPart.mNormal;
Vector rightPartNormal = mrRightPart.mNormal;
if (CDimTools.GetInstance().IsTwoVectorParallel(leftPartNormal, new Vector(1, 0, 0)))
{
pointList.Add(new Point(mrLeftPart.GetMinXPoint().X, boltMaxYPt.Y, 0));
}
if (CDimTools.GetInstance().IsTwoVectorParallel(rightPartNormal, new Vector(1, 0, 0)))
{
pointList.Add(new Point(mrRightPart.GetMaxXPoint().X, boltMaxYPt.Y, 0));
}
if (pointList.Count >= 2)
{
double dimDistance = CCommonPara.mDefaultDimDistance;
Vector dimVector = new Vector(0, 1, 0);
CDimTools.GetInstance().DrawDimensionSet(mViewBase, pointList, dimVector, dimDistance, CCommonPara.mSizeDimPath);
}
}
}
}
/// <summary>
/// 绘制主梁外侧法向与X轴平行的零件标注;
/// </summary>
private void DrawXNormalAlonePartDim()
{
List <CMrPart> xNormalAlonePartList = CMrCylinderDoorFrontManager.GetInstance().mXNormalAloneDimPartList;
CMrPart leftPart = CMrCylinderDoorFrontManager.GetInstance().mLeftPart;
CMrPart leftTopPart = CMrCylinderDoorFrontManager.GetInstance().mLeftTopPart;
CMrPart leftTopMiddlePart = CMrCylinderDoorFrontManager.GetInstance().mLeftTopMiddlePart;
CMrPart rightPart = CMrCylinderDoorFrontManager.GetInstance().mRightPart;
CMrPart rightTopPart = CMrCylinderDoorFrontManager.GetInstance().mRightTopPart;
CMrPart rightTopMiddlePart = CMrCylinderDoorFrontManager.GetInstance().mRightTopMiddlePart;
double leftPartMinX = leftPart.GetMinXPoint().X;
double rightPartMaxX = rightPart.GetMaxXPoint().X;
foreach (CMrPart mrPart in xNormalAlonePartList)
{
double partMinX = mrPart.GetMinXPoint().X;
double partMaxX = mrPart.GetMaxXPoint().X;
if (partMinX < leftPartMinX)
{
PointList pointList = new PointList();
Point minXmaxYPoint = mrPart.GetMinXMaxYPoint();
pointList.Add(minXmaxYPoint);
double dimDistance = CCommonPara.mDefaultDimDistance;
Vector dimVector = new Vector(0, 1, 0);
if (leftTopPart != null && leftTopPart.GetMinXMinYPoint().Y < minXmaxYPoint.Y)
{
pointList.Add(new Point(leftTopPart.GetMinXPoint().X, minXmaxYPoint.Y, 0));
}
else if (leftTopMiddlePart != null && leftTopMiddlePart.GetMinXMinYPoint().Y < minXmaxYPoint.Y)
{
pointList.Add(new Point(leftTopMiddlePart.GetMinXPoint().X, minXmaxYPoint.Y, 0));
}
else
{
pointList.Add(new Point(leftPartMinX, minXmaxYPoint.Y, 0));
}
CDimTools.GetInstance().DrawDimensionSet(mViewBase, pointList, dimVector, dimDistance, CCommonPara.mSizeDimPath);
}
else if (partMaxX > rightPartMaxX)
{
PointList pointList = new PointList();
Point maxXmaxYPoint = mrPart.GetMaxXMaxYPoint();
pointList.Add(maxXmaxYPoint);
double dimDistance = CCommonPara.mDefaultDimDistance;
Vector dimVector = new Vector(0, 1, 0);
if (rightTopPart != null && rightTopPart.GetMaxXMinYPoint().Y < maxXmaxYPoint.Y)
{
pointList.Add(new Point(rightTopPart.GetMaxXPoint().X, maxXmaxYPoint.Y, 0));
}
else if (rightTopMiddlePart != null && rightTopMiddlePart.GetMaxXMinYPoint().Y < maxXmaxYPoint.Y)
{
pointList.Add(new Point(rightTopMiddlePart.GetMaxXPoint().X, maxXmaxYPoint.Y, 0));
}
else
{
pointList.Add(new Point(rightPartMaxX, maxXmaxYPoint.Y, 0));
}
CDimTools.GetInstance().DrawDimensionSet(mViewBase, pointList, dimVector, dimDistance, CCommonPara.mSizeDimPath);
}
}
}