protected override bool FindTangentialPoint(MouseEventArgs e, IView vw, out GeoPoint found)
{
double mindist = double.MaxValue;
found = GeoPoint.Origin;
if (base.CurrentInput == lengthInput && iCurve is Line)
{
GeoObjectList l = base.GetObjectsUnderCursor(e.Location);
l.DecomposeAll();
for (int i = 0; i < l.Count; i++)
{
if (l[i] is ICurve)
{
double[] tanpos = (l[i] as ICurve).TangentPosition(iCurve.StartDirection);
if (tanpos != null)
{
for (int j = 0; j < tanpos.Length; j++)
{
GeoPoint p = (l[i] as ICurve).PointAt(tanpos[j]);
double d = base.WorldPoint(e.Location) | p;
if (d < mindist)
{
mindist = d;
found = p;
}
}
}
}
}
}
return(mindist != double.MaxValue);
}
/// <summary>
/// Implements <see cref="Action.OnMouseMove"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseMove.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseMove.vw"/></param>
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
using (Frame.Project.Undo.ContextFrame(this))
{
SnapPointFinder.DidSnapModes DidSnap;
GeoPoint p = base.SnapPoint(e, fixPoint, vw, out DidSnap);
// hier möglicherweise einige Fangmethoden ausschalten
// der fixPoint und der aktuelle Punkt werden in die aktuelle Zeichenebene projiziert
if (CalculateAngleEvent != null)
{
SetAngle(new Angle(CalculateAngleEvent(p)));
}
else
{
if (usesLocalPlane)
{
GeoPoint2D pp = localPlane.Project(p);
SetAngle(new Angle(pp, GeoPoint2D.Origin));
}
else
{
GeoPoint2D pp = ActiveDrawingPlane.Project(p);
GeoPoint2D pfixpoint = ActiveDrawingPlane.Project(fixPoint);
SetAngle(new Angle(pp, pfixpoint));
}
}
}
}
/// <summary>
/// Implements <see cref="Action.OnMouseDown"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseDown.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseDown.vw"/></param>
public override void OnMouseDown(MouseEventArgs e, IView vw)
{
if (Mode == 0 && Frame.GetBooleanSetting("ZoomAction.SingleClick", false))
{
OnMouseUp(e, vw); // schaltet in Modus 1 weiter
}
}
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
if (e.Button != MouseButtons.Left)
{
return;
}
if (modelView == null)
{
return;
}
int HScrollOffset = lastPanPosition.X - e.X;
if (HScrollOffset == 0)
{
return;
}
double Factor = 1.0;
if (HScrollOffset > 0)
{
Factor = 1.0 + HScrollOffset / 100.0;
}
else if (HScrollOffset < 0)
{
Factor = 1.0 / (1.0 - HScrollOffset / 100.0);
}
(modelView as IView).ZoomDelta(Factor);
lastPanPosition = new System.Drawing.Point(e.X, e.Y);
}
public void OnMouseMove(MouseEventArgs e, IView View)
{
try
{
Action a = (Actions.Count > 0) ? (Action)Actions.Peek() : null;
if (a != null && a.AcceptMouseInput(View))
{
a.SetCurrentMouseView(View);
a.OnMouseMove(e, View);
}
else
{
View.SetCursor("No");
}
++liceneseCounter; // overflow macht nix, ausprobiert!
if (liceneseCounter % 5000 == 10)
{
}
}
catch (Exception ex)
{ // der ActionStack ist der Verteiler der MouseMessages. Falls dort eine Exception auftritt
// wird die hier gefangen und stört nicht weiter. Das ist eine Forderung von ERSA. Ggf.
// hier eine Möglichkeit die Exceeption doch noch weiterzureichen vorsehen.
if (ex is ThreadAbortException)
{
throw (ex);
}
}
}
/// <summary>
/// Implements <see cref="Action.OnMouseMove"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseMove.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseMove.vw"/></param>
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
using (Frame.Project.Undo.ContextFrame(this))
{
SnapPointFinder.DidSnapModes DidSnap;
SetGeoVector(base.SnapPoint(e, vw, out DidSnap) - basePoint);
}
}
protected override bool FindTangentialPoint(MouseEventArgs e, IView vw, out GeoPoint found)
{
double mindist = double.MaxValue;
found = GeoPoint.Origin;
if (CurrentInput == width && startPointInput.Fixed)
{
GeoObjectList l = base.GetObjectsUnderCursor(e.Location);
l.DecomposeAll();
for (int i = 0; i < l.Count; i++)
{
if (l[i] is ICurve)
{
double[] tanpos = (l[i] as ICurve).TangentPosition(line.ParallelogramSecondaryDirection);
if (tanpos != null)
{
for (int j = 0; j < tanpos.Length; j++)
{
GeoPoint p = (l[i] as ICurve).PointAt(tanpos[j]);
double d = base.WorldPoint(e.Location) | p;
if (d < mindist)
{
mindist = d;
found = p;
}
}
}
}
}
}
if (CurrentInput == height && startPointInput.Fixed)
{
GeoObjectList l = base.GetObjectsUnderCursor(e.Location);
l.DecomposeBlocks(true);
l.DecomposeBlockRefs();
for (int i = 0; i < l.Count; i++)
{
if (l[i] is ICurve)
{
double[] tanpos = (l[i] as ICurve).TangentPosition(line.StartDirection);
if (tanpos != null)
{
for (int j = 0; j < tanpos.Length; j++)
{
GeoPoint p = (l[i] as ICurve).PointAt(tanpos[j]);
double d = base.WorldPoint(e.Location) | p;
if (d < mindist)
{
mindist = d;
found = p;
}
}
}
}
}
}
return(mindist != double.MaxValue);
}
/// <summary>
/// Implements <see cref="Action.OnMouseUp"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseUp.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseUp.vw"/></param>
public override void OnMouseUp(MouseEventArgs e, IView vw)
{
using (Frame.Project.Undo.ContextFrame(this))
{
SnapPointFinder.DidSnapModes DidSnap;
SetGeoVector(base.SnapPoint(e, vw, out DidSnap) - basePoint);
}
Frame.Project.Undo.ClearContext(); // also die nächsten Änderungen sind ein neuer undo Schritt
base.RemoveThisAction();
}
private void OnClickOnSelectedObject(IGeoObject selected, IView vw, MouseEventArgs e, ref bool handled)
{
if (!handled && propertyPage != null)
{
GeoPoint dp = vw.Projection.DrawingPlanePoint(new Point(e.X, e.Y));
int index;
Dimension.HitPosition hp = dimension.GetHitPosition(vw.Projection, vw.Projection.ProjectUnscaled(dp), out index);
if ((hp & Dimension.HitPosition.Text) != 0)
{
propertyPage.MakeVisible(dimText[index]);
propertyPage.SelectEntry(dimText[index]);
}
else if ((hp & Dimension.HitPosition.LowerText) != 0)
{
propertyPage.MakeVisible(tolMinusText[index]);
propertyPage.SelectEntry(tolMinusText[index]);
}
else if ((hp & Dimension.HitPosition.PostFix) != 0)
{
propertyPage.MakeVisible(postfix[index]);
propertyPage.SelectEntry(postfix[index]);
}
else if ((hp & Dimension.HitPosition.PostFixAlt) != 0)
{
propertyPage.MakeVisible(postfixAlt[index]);
propertyPage.SelectEntry(postfixAlt[index]);
}
else if ((hp & Dimension.HitPosition.Prefix) != 0)
{
propertyPage.MakeVisible(prefix[index]);
propertyPage.SelectEntry(prefix[index]);
}
else if ((hp & Dimension.HitPosition.UpperText) != 0)
{
propertyPage.MakeVisible(tolPlusText[index]);
propertyPage.SelectEntry(tolPlusText[index]);
}
else if ((hp & Dimension.HitPosition.AltText) != 0)
{
// den gibts noch nicht
}
// es wird nicht gehandled hier, damit der Text-Hotspot noch geht
// der Texteditor macht noch zu große Probleme hier
// er ist in der Dimension auch erst für DimText mit Index 0 implementiert ...
// Text text = dimension.EditText(vw.Projection,0,Dimension.EditingMode.editDimText);
// editor = new TextEditor(text,dimText[0],Frame);
// editor.OnFilterMouseMessages(SelectObjectsAction.MouseAction.MouseDown, e,vw,ref handled);
// if (handled)
// {
// text.DidChange += new ChangeDelegate(OnTextEdited);
// }
}
}
protected override bool FindTangentialPoint(MouseEventArgs e, IView vw, out GeoPoint found)
{
double mindist = double.MaxValue;
found = GeoPoint.Origin;
// nur beim dritten Punkt:
if (CurrentInput == pointInput && curve1Input.Fixed && curve2Input.Fixed)
{
GeoObjectList l = base.GetObjectsUnderCursor(e.Location);
l.DecomposeAll();
GeoPoint inpoint = base.WorldPoint(e.Location);
Plane pln = arc.Plane;
bool plnOK = false;
for (int i = 0; i < l.Count; i++)
{
if (l[i] is ICurve)
{
ICurve curve = l[i] as ICurve;
if (curve is Line)
{
// alles in einer Ebene? In welcher?
plnOK = !((pln.Distance((curve as Line).StartPoint) > Precision.eps) || (pln.Distance((curve as Line).EndPoint) > Precision.eps));
}
if (curve is Ellipse)
{
plnOK = (curve.IsInPlane(pln));
// alles in einer Ebene?
}
if (plnOK)
{
// Achtung! Die Sortierung mit Linie(n) am Anfang ist wichtig für die Auswertung des Abstandes!!
ICurve2D l2D1 = (l[i] as ICurve).GetProjectedCurve(pln);
ICurve2D l2D2 = tang1Curves[selected1].GetProjectedCurve(pln);
ICurve2D l2D3 = tang2Curves[selected2].GetProjectedCurve(pln);
GeoPoint2D[] tangentPoints = Curves2D.TangentCircle(l2D1, l2D2, l2D3, pln.Project(inpoint), pln.Project(object1Point), pln.Project(object2Point));
if (tangentPoints.Length > 0)
{
for (int k = 0; k < tangentPoints.Length; k += 4)
{
double dist = Geometry.Dist(tangentPoints[k + 1], pln.Project(inpoint));
if (dist < mindist)
{
mindist = dist;
found = pln.ToGlobal(tangentPoints[k + 1]);
}
}
}
}
}
}
}
return(mindist != double.MaxValue);
}
/// <summary>
/// Implements <see cref="Action.OnMouseMove"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseMove.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseMove.vw"/></param>
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
using (Frame.Project.Undo.ContextFrame(this))
{
SnapPointFinder.DidSnapModes DidSnap;
switch (mode)
{
case Mode.fromPoint:
SetLength(Geometry.Dist(base.SnapPoint(e, fixPoint, vw, out DidSnap), fixPoint));
break;
case Mode.fromLine:
SetLength(Geometry.DistPL(base.SnapPoint(e, fixPoint, vw, out DidSnap), linePoint, lineDirection));
break;
}
}
}
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
if (e.Button != MouseButtons.Left)
{
return;
}
if (modelView == null)
{
return;
}
vw.Canvas.Cursor = "SizeAll";
int HScrollOffset = e.X - lastPanPosition.X;
int VScrollOffset = e.Y - lastPanPosition.Y;
modelView.Scroll(HScrollOffset, VScrollOffset);
lastPanPosition = new System.Drawing.Point(e.X, e.Y);
}
/// <summary>
/// Implements <see cref="Action.OnMouseMove"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseMove.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseMove.vw"/></param>
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
using (Frame.Project.Undo.ContextFrame(this))
{
SnapPointFinder.DidSnapModes DidSnap;
GeoPoint p = base.SnapPoint(e, basePoint, vw, out DidSnap);
if (DidSnap == SnapPointFinder.DidSnapModes.DidNotSnap)
{
// der Punkt wurde also nicht gefangen, befindet sich somit in der Zeichenebene
// da diese Aktion aber bei Hotspots drankommt, soll aber statt der Zeichenebene die zur Zeichenebene
// parallele Ebene durch den basePoint (den Ausgangspunkt) genommen werden
Plane parallel = GetMousePlane(vw); // new Plane(basePoint, vw.Projection.DrawingPlane.DirectionX, vw.Projection.DrawingPlane.DirectionY);
p = parallel.ToGlobal(parallel.Project(p));
// die Berechnung ist umständlich, man bräuchte nur den Offsetvektor einmal berechnen
}
SetGeoPoint(p);
}
}
public void OnMouseWheel(MouseEventArgs e, IView View)
{
try
{
Action a = (Actions.Count > 0) ? (Action)Actions.Peek() : null;
if (a != null && a.AcceptMouseInput(View))
{
a.OnMouseWheel(e, View);
}
}
catch (Exception ex)
{ // der ActionStack ist der Verteiler der MouseMessages. Falls dort eine Exception auftritt
// wird die hier gefangen und stört nicht weiter. Das ist eine Forderung von ERSA. Ggf.
// hier eine Möglichkeit die Exceeption doch noch weiterzureichen vorsehen.
if (ex is ThreadAbortException)
{
throw (ex);
}
}
}
/// <summary>
/// Overrides <see cref="CADability.Actions.Action.OnMouseUp (MouseEventArgs, IView)"/>
/// </summary>
/// <param name="e"></param>
/// <param name="vw"></param>
public override void OnMouseUp(MouseEventArgs e, IView vw)
{
OnMouseMove(e, vw); // damit wird Invalidate... aufgerufen
switch (Mode)
{
case 0:
Mode = 1;
SecondPoint = FirstPoint;
break;
case 1:
Mode = -1;
BoundingRect mm = BoundingRect.EmptyBoundingRect;
mm.MinMax(vw.Projection.PointWorld2D(FirstPoint));
mm.MinMax(vw.Projection.PointWorld2D(SecondPoint));
base.RemoveThisAction(); // damit werden auch die PaintHandler abgemeldet
// und es gibt noch ungültige Bereiche im Active. D.h. es wird gelöscht.
vw.ZoomToRect(mm);
break;
}
}
/// <summary>
/// Implements <see cref="Action.OnMouseMove"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseMove.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseMove.vw"/></param>
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
switch (Mode)
{
case 0:
activeView = vw;
vw.Invalidate(PaintBuffer.DrawingAspect.Active, Rectangle.FromLTRB(vw.DisplayRectangle.Left, FirstPoint.Y, vw.DisplayRectangle.Right, FirstPoint.Y + 1));
vw.Invalidate(PaintBuffer.DrawingAspect.Active, Rectangle.FromLTRB(FirstPoint.X, vw.DisplayRectangle.Top, FirstPoint.X + 1, vw.DisplayRectangle.Bottom));
FirstPoint = new Point(e.X, e.Y);
vw.Invalidate(PaintBuffer.DrawingAspect.Active, Rectangle.FromLTRB(vw.DisplayRectangle.Left, FirstPoint.Y, vw.DisplayRectangle.Right, FirstPoint.Y + 1));
vw.Invalidate(PaintBuffer.DrawingAspect.Active, Rectangle.FromLTRB(FirstPoint.X, vw.DisplayRectangle.Top, FirstPoint.X + 1, vw.DisplayRectangle.Bottom));
break;
case 1:
Rectangle Clip = PaintBuffer.RectangleFromPoints(FirstPoint, SecondPoint, new Point(e.X, e.Y));
Clip.Width += 1;
Clip.Height += 1;
vw.Invalidate(PaintBuffer.DrawingAspect.Active, Clip);
SecondPoint = new Point(e.X, e.Y);
break;
}
}
protected override bool FindTangentialPoint(MouseEventArgs e, IView vw, out GeoPoint found)
{
double mindist = double.MaxValue;
found = GeoPoint.Origin;
if (CurrentInput == rad && circCenter.Fixed)
{
GeoObjectList l = base.GetObjectsUnderCursor(e.Location);
l.DecomposeBlocks(true);
l.DecomposeBlockRefs();
GeoPoint inpoint = base.WorldPoint(e.Location);
Plane pln = vw.Projection.DrawingPlane;
for (int i = 0; i < l.Count; i++)
{
if (l[i] is ICurve)
{
ICurve curve = l[i] as ICurve;
if (curve.IsInPlane(pln))
{
ICurve2D c2d = curve.GetProjectedCurve(pln);
GeoPoint2D c12d = pln.Project(circle.Center);
GeoPoint2D[] pp = c2d.PerpendicularFoot(c12d);
for (int j = 0; j < pp.Length; j++)
{
GeoPoint p = pln.ToGlobal(pp[j]);
double d = base.WorldPoint(e.Location) | p;
if (d < mindist)
{
mindist = d;
found = p;
}
}
}
}
}
}
return(mindist != double.MaxValue);
}
public void OnMouseUp(MouseEventArgs e, IView View)
{
try
{
Action a = (Actions.Count > 0) ? (Action)Actions.Peek() : null;
if (a != null && a.AcceptMouseInput(View))
{
a.SetCurrentMouseView(View);
a.OnMouseUp(e, View);
}
{ // folgende Zeile nur zum Aufwecken der open cascade dll
// dmit die Prüfung der Lizenz stattfindet
}
}
catch (Exception ex)
{ // der ActionStack ist der Verteiler der MouseMessages. Falls dort eine Exception auftritt
// wird die hier gefangen und stört nicht weiter. Das ist eine Forderung von ERSA. Ggf.
// hier eine Möglichkeit die Exceeption doch noch weiterzureichen vorsehen.
if (ex is ThreadAbortException)
{
throw (ex);
}
}
}
/// <summary>
/// Implements <see cref="Action.OnMouseDown"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseDown.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseDown.vw"/></param>
public override void OnMouseDown(MouseEventArgs e, IView vw)
{
base.OnMouseDown(e, vw);
}
/// <summary>
/// Implements <see cref="Action.OnMouseUp"/>. If you override this method
/// don't forget to call the bas implementation.
/// </summary>
/// <param name="e"><paramref name="Action.OnMouseUp.e"/></param>
/// <param name="vw"><paramref name="Action.OnMouseUp.vw"/></param>
public override void OnMouseUp(MouseEventArgs e, IView vw)
{
OnMouseMove(e, vw);
Frame.Project.Undo.ClearContext(); // also die nächsten Änderungen sind ein neuer undo Schritt
base.RemoveThisAction();
}
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
if (e.Button != MouseButtons.Left)
{
return;
}
if (modelView == null)
{
return;
}
int HOffset = e.X - lastPanPosition.X;
int VOffset = e.Y - lastPanPosition.Y;
if (VOffset != 0 || HOffset != 0)
{
Projection Projection = vw.Projection;
lastPanPosition = new Point(e.X, e.Y);
GeoVector haxis = Projection.InverseProjection * GeoVector.XAxis;
GeoVector vaxis = Projection.InverseProjection * GeoVector.YAxis;
ModOp mh = ModOp.Rotate(vaxis, SweepAngle.Deg(HOffset / 5.0));
ModOp mv = ModOp.Rotate(haxis, SweepAngle.Deg(VOffset / 5.0));
ModOp project = Projection.UnscaledProjection * mv * mh;
// jetzt noch die Z-Achse einrichten. Die kann senkrecht nach oben oder unten
// zeigen. Wenn die Z-Achse genau auf den Betrachter zeigt oder genau von ihm weg,
// dann wird keine Anpassung vorgenommen, weils sonst zu sehr wackelt
GeoVector z = project * GeoVector.ZAxis;
if (modelView.ZAxisUp)
{
const double mindeg = 0.05; // nur etwas aufrichten, aber in jedem Durchlauf
if (z.y < -0.1)
{ // Z-Achse soll nach unten zeigen
Angle a = new Angle(-GeoVector2D.YAxis, new GeoVector2D(z.x, z.y));
if (a.Radian > mindeg)
{
a.Radian = mindeg;
}
if (a.Radian < -mindeg)
{
a.Radian = -mindeg;
}
if (z.x < 0)
{
project = project * ModOp.Rotate(vaxis ^ haxis, -a.Radian);
}
else
{
project = project * ModOp.Rotate(vaxis ^ haxis, a.Radian);
}
z = project * GeoVector.ZAxis;
}
else if (z.y > 0.1)
{
Angle a = new Angle(GeoVector2D.YAxis, new GeoVector2D(z.x, z.y));
if (a.Radian > mindeg)
{
a.Radian = mindeg;
}
if (a.Radian < -mindeg)
{
a.Radian = -mindeg;
}
if (z.x < 0)
{
project = project * ModOp.Rotate(vaxis ^ haxis, a.Radian);
}
else
{
project = project * ModOp.Rotate(vaxis ^ haxis, -a.Radian);
}
z = project * GeoVector.ZAxis;
}
}
// Fixpunkt bestimmen
Point clcenter = vw.Canvas.ClientRectangle.Location;
clcenter.X += vw.Canvas.ClientRectangle.Width / 2;
clcenter.Y += vw.Canvas.ClientRectangle.Height / 2;
// ium Folgenden ist Temporary auf true zu setzen und ein Mechanismus zu finden
// wie der QuadTree von ProjektedModel berechnet werden soll
//GeoVector newDirection = mv * mh * Projection.Direction;
//GeoVector oldDirection = Projection.Direction;
//GeoVector perp = oldDirection ^ newDirection;
GeoPoint fixpoint;
//if (Settings.GlobalSettings.ContainsSetting("ViewFixPoint"))
if (modelView != null && modelView.FixPointValid)
{
//fixpoint = (GeoPoint)Settings.GlobalSettings.GetValue("ViewFixPoint");
fixpoint = modelView.FixPoint;
}
else
{
fixpoint = Projection.UnProject(clcenter);
}
modelView.SetViewDirection(project, fixpoint, true);
if (Math.Abs(HOffset) > Math.Abs(VOffset))
{
if (HOffset > 0)
{
vw.Canvas.Cursor = "PanEast";
}
else
{
vw.Canvas.Cursor = "PanWest";
}
}
else
{
if (HOffset > 0)
{
vw.Canvas.Cursor = "PanSouth";
}
else
{
vw.Canvas.Cursor = "PanNorth";
}
}
modelView.projectedModelNeedsRecalc = false;
}
}
public override void OnMouseUp(MouseEventArgs e, IView vw)
{
base.RemoveThisAction();
}
public override void OnMouseUp(MouseEventArgs e, IView vw)
{
(layoutView as IView).Invalidate(PaintBuffer.DrawingAspect.Active, (layoutView as IView).Canvas.ClientRectangle);
layoutPatch.RefreshShowProperties();
layoutView.Repaint();
}
public override void OnMouseDown(MouseEventArgs e, IView vw)
{
lastPanPosition = new System.Drawing.Point(e.X, e.Y);
modelView = vw as ModelView; // nur da soll gedreht werden
}
public override void OnMouseDown(MouseEventArgs e, IView vw)
{
lastPos = downPos = layoutView.screenToLayout * new GeoPoint2D(e.X, e.Y);
}
protected override bool FindTangentialPoint(MouseEventArgs e, IView vw, out GeoPoint found)
{
double mindist = double.MaxValue;
found = GeoPoint.Origin;
if (CurrentInput == secondPointInput && startPointInput.Fixed)
{
GeoObjectList l = base.GetObjectsUnderCursor(e.Location);
l.DecomposeAll();
GeoPoint inpoint = base.WorldPoint(e.Location);
Plane pln = vw.Projection.DrawingPlane;
for (int i = 0; i < l.Count; i++)
{
if (l[i] is ICurve)
{
ICurve curve = l[i] as ICurve;
if (curve.IsInPlane(pln))
{
ICurve2D c2d = curve.GetProjectedCurve(pln);
GeoPoint2D c12d = pln.Project(line.RectangleLocation);
GeoPoint2D[] pp = c2d.PerpendicularFoot(c12d);
for (int j = 0; j < pp.Length; j++)
{
GeoPoint p = pln.ToGlobal(pp[j]);
double d = base.WorldPoint(e.Location) | p;
if (d < mindist)
{
mindist = d;
found = p;
}
}
}
}
}
}
if (CurrentInput == height && startPointInput.Fixed && secondPointInput.Fixed)
{
GeoObjectList l = base.GetObjectsUnderCursor(e.Location);
l.DecomposeBlocks(true);
l.DecomposeBlockRefs();
for (int i = 0; i < l.Count; i++)
{
if (l[i] is ICurve)
{
double[] tanpos = (l[i] as ICurve).TangentPosition(line.StartDirection);
if (tanpos != null)
{
for (int j = 0; j < tanpos.Length; j++)
{
GeoPoint p = (l[i] as ICurve).PointAt(tanpos[j]);
double d = base.WorldPoint(e.Location) | p;
if (d < mindist)
{
mindist = d;
found = p;
}
}
}
}
}
}
return(mindist != double.MaxValue);
}
public override void OnMouseMove(MouseEventArgs e, IView vw)
{
if (e.Button == MouseButtons.None)
{
GeoPoint2D p = layoutView.screenToLayout * new GeoPoint2D(e.X, e.Y);
double fr = Math.Abs(layoutView.screenToLayout * 3); // 3 Pixel ModOp2D
// p im LayoutSystem
BoundingRect ext;
if (layoutPatch.Area == null)
{
ext = new BoundingRect(0.0, 0.0, layoutView.Layout.PaperWidth, layoutView.Layout.PaperHeight);
}
else
{
ext = layoutPatch.Area.Extent;
}
BoundingRect.Position pos = ext.GetPosition(p, fr);
if (pos == BoundingRect.Position.inside)
{
currentPosition = Position.inside;
}
else if (pos == BoundingRect.Position.outside)
{
currentPosition = Position.outside;
}
else
{
if (Math.Abs(ext.Bottom - p.y) < fr)
{
currentPosition = Position.bottom;
}
if (Math.Abs(ext.Top - p.y) < fr)
{
currentPosition = Position.top;
}
if (Math.Abs(ext.Left - p.x) < fr)
{
currentPosition = Position.left;
}
if (Math.Abs(ext.Right - p.x) < fr)
{
currentPosition = Position.right;
}
}
setCursor(vw);
}
else if (e.Button == MouseButtons.Left)
{
setCursor(vw);
GeoPoint2D p = layoutView.screenToLayout * new GeoPoint2D(e.X, e.Y);
BoundingRect ext;
if (layoutPatch.Area == null)
{
ext = new BoundingRect(0.0, 0.0, layoutView.Layout.PaperWidth, layoutView.Layout.PaperHeight);
}
else
{
ext = layoutPatch.Area.Extent;
}
double xPos = 0.0;
double yPos = 0.0;
switch (currentPosition)
{
case Position.inside:
xPos = p.x - lastPos.x;
yPos = p.y - lastPos.y;
lastPos = p;
break;
case Position.outside:
xPos = p.x - lastPos.x;
yPos = p.y - lastPos.y;
ext.Move(new GeoVector2D(xPos, yPos));
lastPos = p;
break;
case Position.left:
ext.Left = p.x;
break;
case Position.right:
ext.Right = p.x;
break;
case Position.bottom:
ext.Bottom = p.y;
break;
case Position.top:
ext.Top = p.y;
break;
}
layoutPatch.Area = ext.ToBorder();
if (xPos != 0.0 || yPos != 0.0)
{
layoutView.Layout.MovePatch(layoutPatch, xPos, yPos);
}
(layoutView as IView).Invalidate(PaintBuffer.DrawingAspect.Active, (layoutView as IView).Canvas.ClientRectangle);
}
}
protected override bool FindTangentialPoint(MouseEventArgs e, IView vw, out GeoPoint found)
{
double mindist = double.MaxValue;
found = GeoPoint.Origin;
// nur beim dritten Punkt:
if (CurrentInput == arcPoint3Input && arcPoint1Input.Fixed && arcPoint2Input.Fixed)
{
GeoObjectList l = base.GetObjectsUnderCursor(e.Location);
l.DecomposeAll();
GeoPoint inpoint = base.WorldPoint(e.Location);
Plane pln = Plane.XYPlane;
bool plnOK = false;
for (int i = 0; i < l.Count; i++)
{
if (l[i] is ICurve)
{
ICurve curve = l[i] as ICurve;
if (curve is Line)
{
double eps;
bool linear;
// alles in einer Ebene? In welcher?
pln = Plane.FromPoints(new GeoPoint[] { circlePoint1, circlePoint2, (curve as Line).StartPoint, (curve as Line).EndPoint }, out eps, out linear);
plnOK = !(linear || eps > Precision.eps);
}
if (curve is Ellipse)
{
pln = (curve as Ellipse).GetPlane();
// alles in einer Ebene?
plnOK = !((pln.Distance(circlePoint1) > Precision.eps) || (pln.Distance(circlePoint2) > Precision.eps));
}
if (plnOK)
{ // Hilfskreise machen um die ersten 2 Punkte:
Ellipse circLoc1;
circLoc1 = Ellipse.Construct();
circLoc1.SetCirclePlaneCenterRadius(pln, circlePoint1, 0.0);
Ellipse circLoc2;
circLoc2 = Ellipse.Construct();
circLoc2.SetCirclePlaneCenterRadius(pln, circlePoint2, 0.0);
// Achtung! Die Sortierung mit Linie(n) am Anfang ist wichtig für die Auswertung des Abstandes!!
ICurve2D l2D1 = (l[i] as ICurve).GetProjectedCurve(pln);
ICurve2D l2D2 = circLoc1.GetProjectedCurve(pln);
ICurve2D l2D3 = circLoc2.GetProjectedCurve(pln);
GeoPoint2D[] tangentPoints = Curves2D.TangentCircle(l2D1, l2D2, l2D3, pln.Project(inpoint), pln.Project(circlePoint1), pln.Project(circlePoint2));
if (tangentPoints.Length > 0)
{
for (int k = 0; k < tangentPoints.Length; k += 4)
{
double dist = Geometry.Dist(tangentPoints[k + 1], pln.Project(inpoint));
if (dist < mindist)
{
mindist = dist;
found = pln.ToGlobal(tangentPoints[k + 1]);
}
}
}
}
}
}
}
return(mindist != double.MaxValue);
}