public void ATTClientGroupFoundEvent(object sender, Bluegiga.BLE.Events.ATTClient.GroupFoundEventArgs e)
{
String log = String.Format("ble_evt_attclient_group_found: connection={0}, start={1}, end={2}, uuid=[ {3}]" + Environment.NewLine,
e.connection,
e.start,
e.end,
ByteArrayToHexString(e.uuid)
);
//Console.Write(log);
//ThreadSafeDelegate(delegate { txtLog.AppendText(log); });
if (debug)
{
SetLogText(log);
}
// found "service" attribute groups (UUID=0x2800), check for heart rate measurement service
if (e.uuid.SequenceEqual(new Byte[] { 0x0D, 0x18 }))
{
//ThreadSafeDelegate(delegate { txtLog.AppendText(String.Format("Found attribute group for service w/UUID=0x180D: start={0}, end=%d", e.start, e.end) + Environment.NewLine); });
String logText = String.Format("Found attribute group for service w/UUID=0x180D: start={0}, end=%d", e.start, e.end) + Environment.NewLine;
if (debug)
{
SetLogText(logText);
}
att_handlesearch_start = e.start;
att_handlesearch_end = e.end;
}
}
/// <summary>
/// Information (uuid) about serv. found, have to determine we know it (Serv. List).
/// </summary>
/// <param name="sender"></param>
/// <param name="e">GroupFoundEventArgs</param>
public void ATTClientGroupFoundEvent(object sender, Bluegiga.BLE.Events.ATTClient.GroupFoundEventArgs e)
{
String log = String.Format("group_found: connection={0}, start={1}, end={2}, uuid=[ {3}]" + Environment.NewLine,
e.connection,
e.start,
e.end,
ByteArrayToHexString(e.uuid)
);
Console.Write(log);
ThreadSafeDelegate(delegate { txtLog.AppendText(log); });
// found "service" attribute groups check for sensorplattform and debug service
if (e.uuid.SequenceEqual(new Byte[] { 0x1b, 0xc5, 0xd5, 0xa5, 0x02, 0x00, 0x37, 0xa9, 0xe3, 0x11, 0xde, 0x88, 0x04, 0x00, 0x7e, 0x10 }))
// || e.uuid.SequenceEqual(new Byte[] { 0x1b, 0xc5, 0xd5, 0xa5, 0x02, 0x00, 0x37, 0xa9, 0xe3, 0x11, 0xde, 0x88, 0x01, 0x01, 0x7e, 0x10 }))
{
ThreadSafeDelegate(delegate { txtLog.AppendText(String.Format("attribute group found service {0} start={1}, end={2}", e.uuid, e.start, e.end) + Environment.NewLine); });
att_handlesearch_start = e.start;
att_handlesearch_end = e.end;
// app_state = STATE_SEARCH_PLATTFORM_SERVICE;
}
else
{
ThreadSafeDelegate(delegate { txtLog.AppendText(String.Format("!!! NO group found") + Environment.NewLine); });
}
}
/// <summary>
///
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
public void BLEATTClientGroupFoundEvent(object sender, Bluegiga.BLE.Events.ATTClient.GroupFoundEventArgs e)
{
Application.Current.Dispatcher.Invoke(delegate
{
MessageWriter.LogWrite("ble_evt_att_client_group_found: ", string.Format("connection={0}, start={1}, end={2}, uuid={3}",
e.connection,
e.start,
e.end,
BitConverter.ToString(e.uuid)));
BLEPeripheral peripheral;
if (!connectedDevices.TryGetConnection(e.connection, out peripheral))
{
MessageWriter.LogWrite("Unable to find connection " + e.connection);
return;
}
Service s = new Service();
s.Handle = e.start;
s.GroupEnd = e.end;
s.GroupUUID = e.uuid;
s.Declaration = peripheral.Attributes[e.start];
s.Description = Bluetooth.Parser.Lookup(e.uuid);
if (s.Description == null)
{
s.Description = BitConverter.ToString(s.UUID);
}
if (peripheral.TryAddService(s))
{
peripheral.PopulateService(s);
}
});
}
//-------------------------------------------------------------------------------------------------------------
// Event handler for the ATTClientGroupFoundEvent.
// Here, a service "group" has been found, and that group must be texted to determine if it is
// the specific service group we are interested in.
public void ATTClientGroupFoundEvent(object sender, Bluegiga.BLE.Events.ATTClient.GroupFoundEventArgs e)
{
String log = String.Format("ble_evt_attclient_group_found: connection={0}, start={1}, end={2}, uuid=[ {3}]" + Environment.NewLine,
e.connection,
e.start,
e.end,
ByteArrayToHexString(e.uuid)
);
Console.Write(log);
ThreadSafeDelegate(delegate { txtLog.AppendText(log); });
// Since we were searching for "service" attribute groups (UUID=0x2800), we must have found
// a "service" attribute groups (UUID=0x2800).
// Check the returned e.uuid list for the Heart Rate Measurement service.
// Ref: https://www.bluetooth.com/specifications/gatt/viewer?attributeXmlFile=org.bluetooth.service.heart_rate.xml
// This uses an "extension" method defined in System.Linq.IEnumerable.
if (e.uuid.SequenceEqual(new Byte[] { 0x0D, 0x18 })) // Little-endian
{
// Fount the Heart Rate service, so save the attribute group start and end "indices'.
ThreadSafeDelegate(delegate { txtLog.AppendText(String.Format("Found attribute group for service w/UUID=0x180D: start={0}, end=%d", e.start, e.end) + Environment.NewLine); });
att_handlesearch_start = e.start; // Start of attribute group
att_handlesearch_end = e.end; // End of attribute group
}
}
//This event is produced when an attributed group(a service) is found. Typically this event is produced after Read by Group Type command.
//Data Feild:
// [4] = uint8, connection; Connection handle;
// [5~6] = uint16,start; Starting handle;
// [7~8] = uint16,end; Ending handle; 'end' is a reserved word and in BGScrpit so 'end' conn't be used as such.
// [9..] = uint8array, uuid; UUID os a service; Length is 0 if no service are found.
public void EventGroupFound(object sender, Bluegiga.BLE.Events.ATTClient.GroupFoundEventArgs e)
{
if (!c_BleDev.IsSrvGerenicAccess(e.uuid) && !c_BleDev.IsSrvGenericAttribute(e.uuid))
{
c_BleDev.PrimSrvAdd(e.uuid, e.start, e.end);
}
}
private void ATTClientGroupFoundEvent(object sender, Bluegiga.BLE.Events.ATTClient.GroupFoundEventArgs e)
{
String log = String.Format("ble_evt_attclient_group_found: connection={0}, start={1}, end={2}, uuid=[ {3}]" + Environment.NewLine,
e.connection,
e.start,
e.end,
ByteArrayToHexString(e.uuid)
);
Console.WriteLine("Sipp9X: " + log);
if (e.uuid.SequenceEqual(serviceUuid))
{
Console.WriteLine(String.Format("Found attribute group for service w/UUID={2}: start={0}, end={1}", e.start, e.end, e.uuid) + Environment.NewLine);
SetHandleRange(e.start, e.end);
}
}
public void ATTClientGroupFoundEvent(object sender, Bluegiga.BLE.Events.ATTClient.GroupFoundEventArgs e)
{
String log = String.Format("ble_evt_attclient_group_found: connection={0}, start={1}, end={2}, uuid=[ {3}]" + Environment.NewLine,
e.connection,
e.start,
e.end,
ByteArrayToHexString(e.uuid)
);
Console.Write("Sipp3XII: " + log);
// found "service" attribute groups (UUID=0xfff0), check for heart rate measurement service
if (e.uuid.SequenceEqual(new Byte[] { 0xf0, 0xff }))
{
Console.WriteLine(String.Format("Found attribute group for service w/UUID=0xfff0: start={0}, end={1}", e.start, e.end) + Environment.NewLine);
SetHandleRange(e.start, e.end);
}
}
public void ATTClientGroupFoundEvent(object sender, Bluegiga.BLE.Events.ATTClient.GroupFoundEventArgs e)
{
String log = String.Format("ble_evt_attclient_group_found: connection={0}, start={1}, end={2}, uuid=[ {3}]" + Environment.NewLine,
e.connection,
e.start,
e.end,
ByteArrayToHexString(e.uuid)
);
Console.Write(log);
ThreadSafeDelegate(delegate { txtLog.AppendText(log); });
if (e.uuid.SequenceEqual((new Byte[] { 0x19, 0xb1, 0x00, 0x10, 0xE8, 0xF2,
0x53, 0x7E, 0x4F, 0x6C, 0xD1, 0x04, 0x76, 0x8A, 0x01, 0x16 }).Reverse()))
{
ThreadSafeDelegate(delegate { txtLog.AppendText(String.Format("Found attribute group for service w/UUID=0x180D: start={0}, end=%d", e.start, e.end) + Environment.NewLine); });
att_handlesearch_start = e.start;
att_handlesearch_end = e.end;
}
}