private void BezierQuadraticTest(MyVector3 posA, MyVector3 posB, MyVector3 handle)
{
//Store the interpolated values so we later can display them
List <Vector3> interpolatedValues = new List <Vector3>();
//Loop between 0 and 1 in steps, where 1 step is minimum
//So if steps is 5 then the line will be cut in 5 sections
int steps = 10;
float stepSize = 1f / (float)steps;
float t = 0f;
//+1 becuase wa also have to include the first point
for (int i = 0; i < steps + 1; i++)
{
//Debug.Log(t);
MyVector3 interpolatedValue = BezierQuadratic.GetPosition(posA, posB, handle, t);
interpolatedValues.Add(interpolatedValue.ToVector3());
t += stepSize;
}
//Display the curve
DisplayInterpolation.DisplayCurve(interpolatedValues, useRandomColor: true);
//Display the start and end values and the handle points
DisplayInterpolation.DisplayHandle(handle.ToVector3(), posA.ToVector3());
DisplayInterpolation.DisplayHandle(handle.ToVector3(), posB.ToVector3());
//Display other related data
//Get the forwrd dir of the point at t and display it
MyVector3 forwardDir = BezierQuadratic.GetTangent(posA, posB, handle, tSliderValue);
MyVector3 slidePos = BezierQuadratic.GetPosition(posA, posB, handle, tSliderValue);
Gizmos.color = Color.blue;
Gizmos.DrawRay(slidePos.ToVector3(), forwardDir.ToVector3());
Gizmos.color = Color.red;
Gizmos.DrawWireSphere(slidePos.ToVector3(), 0.15f);
}
private IEnumerator PerformMovementCoroutine(bool ignoreMoveCosts, Action postMovementCallback)
{
Animator.SetTrigger("Moving Requested");
IHexCell startingCell = PositionCanon.GetOwnerOfPossession(this);
IHexCell currentCell = startingCell;
Vector3 currentLocation = Grid.PerformIntersectionWithTerrainSurface(currentCell.AbsolutePosition);
Vector3 a, b, c = currentLocation;
yield return(LookAt(CurrentPath.First().AbsolutePosition));
float t = Time.deltaTime * Config.TravelSpeedPerSecond;
while ((ignoreMoveCosts || CurrentMovement > 0) && CurrentPath != null && CurrentPath.Count > 0)
{
var nextCell = CurrentPath.FirstOrDefault();
Vector3 nextLocation = Grid.PerformIntersectionWithTerrainSurface(nextCell.AbsolutePosition);
if (!PositionCanon.CanChangeOwnerOfPossession(this, nextCell) || nextCell == null)
{
CurrentPath.Clear();
break;
}
if (!ignoreMoveCosts)
{
CurrentMovement = Math.Max(0,
CurrentMovement - PositionCanon.GetTraversalCostForUnit(this, currentCell, nextCell, false)
);
}
PositionCanon.ChangeOwnerOfPossession(this, nextCell);
CurrentPath.RemoveAt(0);
a = c;
b = currentLocation;
c = (b + nextLocation) * 0.5f;
for (; t < 1f; t += Time.deltaTime * Config.TravelSpeedPerSecond)
{
transform.position = BezierQuadratic.GetPoint(a, b, c, t);
Vector3 d = BezierQuadratic.GetFirstDerivative(a, b, c, t);
d.y = 0f;
transform.localRotation = Quaternion.LookRotation(d);
yield return(null);
}
t -= 1f;
currentCell = nextCell;
currentLocation = Grid.PerformIntersectionWithTerrainSurface(currentCell.AbsolutePosition);
}
if (currentCell != startingCell)
{
a = c;
b = currentLocation;
c = b;
for (; t < 1f; t += Time.deltaTime * Config.TravelSpeedPerSecond)
{
transform.position = BezierQuadratic.GetPoint(a, b, c, t);
Vector3 d = BezierQuadratic.GetFirstDerivative(a, b, c, t);
d.y = 0f;
transform.localRotation = Quaternion.LookRotation(d);
yield return(null);
}
}
postMovementCallback();
Animator.SetTrigger("Idling Requested");
}
private void BezierQuadraticEqualSteps(MyVector3 posA, MyVector3 posB, MyVector3 handle)
{
//Store the interpolated values so we later can display them
List <Vector3> actualPositions = new List <Vector3>();
//Create a curve which is the data structure used in the following calculations
BezierQuadratic bezierQuadratic = new BezierQuadratic(posA, posB, handle);
//Step 1. Calculate the length of the entire curve
//This is needed to so we know how long we should walk each step
float lengthNaive = InterpolationHelpMethods.GetLength_Naive(bezierQuadratic, steps: 20, tEnd: 1f);
float lengthExact = InterpolationHelpMethods.GetLength_SimpsonsRule(bezierQuadratic, tStart: 0f, tEnd: 1f);
Debug.Log("Naive length: " + lengthNaive + " Exact length: " + lengthExact);
int steps = 5;
//Important not to confuse this with the step size we use to iterate t
//This step size is distance in m
float length = lengthNaive;
float lengthStepSize = length / (float)steps;
float stepSize = 1f / (float)steps;
float t = 0f;
float distanceTravelled = 0f;
for (int i = 0; i < steps + 1; i++)
{
//MyVector3 inaccuratePos = bezierCubic.GetInterpolatedValue(t);
//Calculate t to get to this distance
//Method 1
//float actualT = InterpolationHelpMethods.Find_t_FromDistance_Iterative(bezierQuadratic, distanceTravelled, length);
//Method 2
float actualT = InterpolationHelpMethods.Find_t_FromDistance_Lookup(bezierQuadratic, distanceTravelled, accumulatedDistances: null);
MyVector3 actualPos = bezierQuadratic.GetInterpolatedValue(actualT);
actualPositions.Add(actualPos.ToVector3());
//Test that the derivative calculations are working
float dEst = InterpolationHelpMethods.EstimateDerivative(bezierQuadratic, t);
float dAct = bezierQuadratic.ExactDerivative(t);
Debug.Log("Estimated derivative: " + dEst + " Actual derivative: " + dAct);
//Debug.Log("Distance " + distanceTravelled);
//Move on to next iteration
distanceTravelled += lengthStepSize;
t += stepSize;
}
//List<MyVector3> positionsOnCurve = InterpolationHelpMethods.SplitCurve(bezierQuadratic, 20, tEnd: 1f);
//foreach (MyVector3 p in positionsOnCurve)
//{
// Gizmos.DrawWireSphere(p.ToVector3(), 0.1f);
//}
DisplayInterpolatedValues(actualPositions, useRandomColor: true);
//Display the start and end values and the handle points
DisplayHandle(handle.ToVector3(), posA.ToVector3());
DisplayHandle(handle.ToVector3(), posB.ToVector3());
}
private void BezierQuadraticTest_EqualSteps(MyVector3 posA, MyVector3 posB, MyVector3 handle)
{
//Create a curve which is the data structure used in the following calculations
BezierQuadratic bezierQuadratic = new BezierQuadratic(posA, posB, handle);
//Step 1. Calculate the length of the entire curve
//This is needed to so we know how long we should walk each step
float lengthNaive = InterpolationHelpMethods.GetLength_Naive(bezierQuadratic, steps: 20, tEnd: 1f);
float lengthExact = InterpolationHelpMethods.GetLength_SimpsonsRule(bezierQuadratic, tStart: 0f, tEnd: 1f);
//Debug.Log("Naive length: " + lengthNaive + " Exact length: " + lengthExact);
//Step 2. Convert the t's to be percentage along the curve
//Save the accurate t at each position on the curve
List <float> accurateTs = new List <float>();
int steps = 5;
//Important not to confuse this with the step size we use to iterate t
//This step size is distance in m
float length = lengthNaive;
float lengthStepSize = length / (float)steps;
float stepSize = 1f / (float)steps;
float t = 0f;
float distanceTravelled = 0f;
for (int i = 0; i < steps + 1; i++)
{
//MyVector3 inaccuratePos = bezierCubic.GetInterpolatedValue(t);
//Calculate t to get to this distance
//Method 1
//float accurateT = InterpolationHelpMethods.Find_t_FromDistance_Iterative(bezierQuadratic, distanceTravelled, length);
//Method 2
float accurateT = InterpolationHelpMethods.Find_t_FromDistance_Lookup(bezierQuadratic, distanceTravelled, accumulatedDistances: null);
accurateTs.Add(accurateT);
//Test that the derivative calculations are working
//float dEst = InterpolationHelpMethods.EstimateDerivative(bezierQuadratic, t);
//float dAct = bezierQuadratic.GetDerivative(t);
//Debug.Log("Estimated derivative: " + dEst + " Actual derivative: " + dAct);
//Debug.Log("Distance " + distanceTravelled);
//Move on to next iteration
distanceTravelled += lengthStepSize;
t += stepSize;
}
//Get the data we want from the curve
//Store the interpolated values so we later can display them
List <Vector3> actualPositions = new List <Vector3>();
//
List <Vector3> tangents = new List <Vector3>();
//Orientation, which includes the tangent and position
List <InterpolationTransform> orientations = new List <InterpolationTransform>();
for (int i = 0; i < accurateTs.Count; i++)
{
float accurateT = accurateTs[i];
MyVector3 actualPos = bezierQuadratic.GetPosition(accurateT);
actualPositions.Add(actualPos.ToVector3());
MyVector3 tangent = bezierQuadratic.GetTangent(accurateT);
tangents.Add(tangent.ToVector3());
//Orientation, which includes both position and tangent
InterpolationTransform orientation = InterpolationTransform.GetTransform_UpRef(bezierQuadratic, accurateT, MyVector3.Up);
orientations.Add(orientation);
}
//Display
//Unity doesnt have a built-in method to display an accurate Qudratic bezier, so we have to create our own
//DisplayInterpolation.DisplayBezierQuadratic(bezierQuadratic, Color.black);
DisplayInterpolation.DisplayCurve(bezierQuadratic, Color.black);
//DisplayInterpolation.DisplayCurve(actualPositions, useRandomColor: true);
DisplayInterpolation.DisplayCurve(actualPositions, Color.gray);
//Display the start and end values and the handle points
DisplayInterpolation.DisplayHandle(handle.ToVector3(), posA.ToVector3());
DisplayInterpolation.DisplayHandle(handle.ToVector3(), posB.ToVector3());
//Stuff on the curve
//DisplayInterpolation.DisplayDirections(actualPositions, tangents, 1f, Color.red);
DisplayInterpolation.DisplayOrientations(orientations, 1f);
}
private void TriangulateCultureCorners_FlatEdge(
IHexCell center, IHexCell left, IHexCell right, IHexCell nextRight, HexDirection direction,
ICivilization centerOwner, ReadOnlyCollection <Vector2> centerRightContour,
ReadOnlyCollection <Vector2> rightCenterContour, IHexMesh cultureMesh
)
{
if (left != null && CivTerritoryLogic.GetCivClaimingCell(left) != centerOwner)
{
Color cultureColor = centerOwner.Template.Color;
var centerLeftContour = CellEdgeContourCanon.GetContourForCellEdge(center, direction.Previous());
var rightLeftContour = CellEdgeContourCanon.GetContourForCellEdge(right, direction.Previous2());
Vector2 centerLeftFirstInner = Vector2.Lerp(centerLeftContour.First(), center.AbsolutePositionXZ, RenderConfig.CultureWidthPercent);
Vector2 centerLeftLastInner = Vector2.Lerp(centerLeftContour.Last(), center.AbsolutePositionXZ, RenderConfig.CultureWidthPercent);
Vector2 rightLeftFirstInner = Vector2.Lerp(rightLeftContour.First(), right.AbsolutePositionXZ, RenderConfig.CultureWidthPercent);
Vector2 rightleftLastInner = Vector2.Lerp(rightLeftContour.Last(), right.AbsolutePositionXZ, RenderConfig.CultureWidthPercent);
Vector2 rayAlongCenterLeft = (centerLeftLastInner - centerLeftFirstInner).normalized;
Vector2 rayAlongRightLeft = (rightLeftFirstInner - rightleftLastInner).normalized;
Vector2 bezierControl;
if (!Geometry2D.ClosestPointsOnTwoLines(
centerLeftLastInner, rayAlongCenterLeft, rightLeftFirstInner, rayAlongRightLeft,
out bezierControl, out bezierControl
))
{
Debug.LogError("TriangulateCultureCorners_FlatEdge failed to find a valid control point");
return;
}
Vector3 pivotXYZ = new Vector3(centerLeftContour.Last().x, 0f, centerLeftContour.Last().y);
float paramDelta = 5f / RenderConfig.RiverQuadsPerCurve;
for (float t = 0; t < 1f; t = Mathf.Clamp01(t + paramDelta))
{
float nextT = Mathf.Clamp01(t + paramDelta);
Vector2 bezierOne = BezierQuadratic.GetPoint(centerLeftLastInner, bezierControl, rightLeftFirstInner, nextT);
Vector2 bezierTwo = BezierQuadratic.GetPoint(centerLeftLastInner, bezierControl, rightLeftFirstInner, t);
cultureMesh.AddTriangle(pivotXYZ, new Vector3(bezierOne.x, 0f, bezierOne.y), new Vector3(bezierTwo.x, 0f, bezierTwo.y));
cultureMesh.AddTriangleUV(new Vector2(0f, 1f), Vector2.zero, Vector2.zero);
cultureMesh.AddTriangleColor(cultureColor);
}
if (rightCenterContour.Count == 3)
{
Vector2 innerPoint = Vector2.Lerp(rightCenterContour.Last(), right.AbsolutePositionXZ, RenderConfig.CultureWidthPercent);
Vector2 secondToLastContour = rightCenterContour[rightCenterContour.Count - 2];
Vector2 lastContour = rightCenterContour.Last();
cultureMesh.AddTriangle(
new Vector3(innerPoint.x, 0f, innerPoint.y), new Vector3(secondToLastContour.x, 0f, secondToLastContour.y),
new Vector3(lastContour.x, 0f, lastContour.y)
);
cultureMesh.AddTriangleUV(new Vector2(0f, 0f), new Vector2(0f, 1f), new Vector2(0f, 1f));
cultureMesh.AddTriangleColor(cultureColor);
}
}
}
