private void BezierCubicTest(MyVector3 posA, MyVector3 posB, MyVector3 handleA, MyVector3 handleB)
{
//Store the interpolated values so we later can display them
List <Vector3> interpolatedValues = new List <Vector3>();
//Loop between 0 and 1 in steps, where 1 step is minimum
//So if steps is 5 then the line will be cut in 5 sections
int steps = 20;
float t_stepSize = 1f / (float)steps;
float t = 0f;
//+1 becuase wa also have to include the first point
for (int i = 0; i < steps + 1; i++)
{
//Debug.Log(t);
MyVector3 interpolatedPos = BezierCubic.GetPosition(posA, posB, handleA, handleB, t);
interpolatedValues.Add(interpolatedPos.ToVector3());
t += t_stepSize;
}
//The curve
DisplayInterpolation.DisplayCurve(interpolatedValues, useRandomColor: true);
//The start and end values and the handle points
DisplayInterpolation.DisplayHandle(handleA.ToVector3(), posA.ToVector3());
DisplayInterpolation.DisplayHandle(handleB.ToVector3(), posB.ToVector3());
}
//Uses transforms as start and end position, the length of the handles is determines by the z scale of each transform
private void BezierCubicTest_Transform(InterpolationTransform transA, InterpolationTransform transB, float scaleA, float scaleB)
{
MyVector3 posA = transA.position;
MyVector3 posB = transB.position;
//The forward vector should move along from a to b
MyVector3 handleA = posA + transA.Forward * scaleA;
MyVector3 handleB = posB + -transB.Forward * scaleB;
BezierCubic curve = new BezierCubic(posA, posB, handleA, handleB);
//The interpolated values
List <Vector3> positions = new List <Vector3>();
List <float> tValues = new List <float>();
//Loop between 0 and 1 in steps, where 1 step is minimum
//So if steps is 5 then the line will be cut in 5 sections
int steps = 30;
float t_stepSize = 1f / (float)steps;
float t = 0f;
//+1 becuase wa also have to include the first point
for (int i = 0; i < steps + 1; i++)
{
//Debug.Log(t);
MyVector3 interpolatedPos = BezierCubic.GetPosition(posA, posB, handleA, handleB, t);
positions.Add(interpolatedPos.ToVector3());
tValues.Add(t);
t += t_stepSize;
}
//Different orientation algorithms
List <InterpolationTransform> transforms = InterpolationTransform.GetTransforms_InterpolateBetweenUpVectors(curve, tValues, transA.Up, transB.Up);
//List<InterpolationTransform> transforms = InterpolationTransform.GetTransforms_UpRef(curve, tValues, transA.Up);
//List<InterpolationTransform> transforms = InterpolationTransform.GetTransforms_FrenetNormal(curve, tValues);
//List<InterpolationTransform> transforms = InterpolationTransform.GetTransforms_RotationMinimisingFrame(curve, tValues, transA.Up);
//The curve
DisplayInterpolation.DisplayCurve(positions, useRandomColor: true);
//The start and end values and the handle points
DisplayInterpolation.DisplayHandle(handleA.ToVector3(), posA.ToVector3());
DisplayInterpolation.DisplayHandle(handleB.ToVector3(), posB.ToVector3());
//Display transform
DisplayInterpolation.DisplayOrientations(transforms, 1f);
//Mesh
Mesh extrudedMesh = ExtrudeMeshAlongCurve.GenerateMesh(transforms, meshProfile, 0.25f);
if (extrudedMesh != null && displayMeshFilter != null)
{
displayMeshFilter.sharedMesh = extrudedMesh;
}
}
private void BezierCubicTest_EqualSteps(MyVector3 posA, MyVector3 posB, MyVector3 handleA, MyVector3 handleB)
{
//Create a curve which is the data structure used in the following calculations
BezierCubic bezierCubic = new BezierCubic(posA, posB, handleA, handleB);
//Step 1. Calculate the length of the entire curve
//This is needed so we know for how long we should walk each step
float lengthNaive = InterpolationHelpMethods.GetLength_Naive(bezierCubic, steps: 20, tEnd: 1f);
float lengthExact = InterpolationHelpMethods.GetLength_SimpsonsRule(bezierCubic, tStart: 0f, tEnd: 1f);
//Debug.Log("Naive length: " + lengthNaive + " Exact length: " + lengthExact);
//Step 2. Convert the t's to be percentage along the curve
//Save the accurate t at each position on the curve
List <float> accurateTs = new List <float>();
//The number of sections we want to divide the curve into
int steps = 20;
//Important not to confuse this with the step size we use to iterate t
//This step size is distance in m
float curveLength = lengthNaive;
float curveLength_stepSize = curveLength / (float)steps;
float t_stepSize = 1f / (float)steps;
float t = 0f;
float distanceTravelled = 0f;
for (int i = 0; i < steps + 1; i++)
{
//MyVector3 inaccuratePos = bezierCubic.GetPosition(t);
//Calculate the t needed to get to this distance along the curve
//Method 1
//float accurateT = InterpolationHelpMethods.Find_t_FromDistance_Iterative(bezierCubic, distanceTravelled, length);
//Method 2
float accurateT = InterpolationHelpMethods.Find_t_FromDistance_Lookup(bezierCubic, distanceTravelled, accumulatedDistances: null);
accurateTs.Add(accurateT);
//Debug.Log(accurateT);
//Test that the derivative calculations are working
//float dEst = InterpolationHelpMethods.EstimateDerivative(bezierCubic, t);
//float dAct = bezierCubic.ExactDerivative(t);
//Debug.Log("Estimated derivative: " + dEst + " Actual derivative: " + dAct);
//Debug.Log("Distance " + distanceTravelled);
//Move on to next iteration
distanceTravelled += curveLength_stepSize;
t += t_stepSize;
}
//Step3. Use the new t's to get information from the curve
//The interpolated positions
List <Vector3> actualPositions = new List <Vector3>();
//Save the tangent at each position on the curve
List <Vector3> tangents = new List <Vector3>();
//Save the orientation, which includes the tangent
//List<InterpolationTransform> orientations = new List<InterpolationTransform>();
for (int i = 0; i < accurateTs.Count; i++)
{
float accurateT = accurateTs[i];
//Position on the curve
MyVector3 actualPos = bezierCubic.GetPosition(accurateT);
actualPositions.Add(actualPos.ToVector3());
//Tangent at each position
MyVector3 tangentDir = BezierCubic.GetTangent(posA, posB, handleA, handleB, accurateT);
tangents.Add(tangentDir.ToVector3());
//Orientation, which includes both position and tangent
//InterpolationTransform orientation = InterpolationTransform.GetTransform(bezierCubic, accurateT);
//orientations.Add(orientation);
}
//The orientation at each t position
MyVector3 startUpRef = MyVector3.Up;
List <InterpolationTransform> orientationsFrames = InterpolationTransform.GetTransforms_RotationMinimisingFrame(bezierCubic, accurateTs, startUpRef);
//Display stuff
//The curve which is split into steps
//DisplayInterpolation.DisplayCurve(actualPositions, useRandomColor: true);
DisplayInterpolation.DisplayCurve(actualPositions, Color.gray);
//The start and end values and the handle points
DisplayInterpolation.DisplayHandle(handleA.ToVector3(), posA.ToVector3());
DisplayInterpolation.DisplayHandle(handleB.ToVector3(), posB.ToVector3());
//The actual Bezier cubic for reference
DisplayInterpolation.DisplayCurve(bezierCubic, Color.black);
//Handles.DrawBezier(posA.ToVector3(), posB.ToVector3(), handleA.ToVector3(), handleB.ToVector3(), Color.black, EditorGUIUtility.whiteTexture, 1f);
//The tangents
//DisplayInterpolation.DisplayDirections(actualPositions, tangents, 1f, Color.red);
//The orientation
//DisplayInterpolation.DisplayOrientations(orientations, 1f);
DisplayInterpolation.DisplayOrientations(orientationsFrames, 1f);
//Extrude mesh along the curve
//InterpolationTransform testTrans = orientationsFrames[1];
//MyVector3 pos = testTrans.LocalToWorld(MyVector3.Up * 2f);
//MyVector3 pos = testTrans.LocalToWorld(MyVector3.Right * 2f);
//Gizmos.DrawSphere(pos.ToVector3(), 0.1f);
//DisplayInterpolation.DisplayExtrudedMesh(orientationsFrames, meshProfile);
}