/// <summary>
/// Final defensive fire scans through all potential FCs that could fire defensively on the incoming missile to see if it is intercepeted.
/// All PD enabled FCs will attempt to shoot down this missile except ones from the same faction, as this missile is practically right on top of said FC.
/// In other words allied/neutral status isn't taken into account.
/// </summary>
/// <param name="P">Faction list</param>
/// <param name="Missile">Missile to try to intercept</param>
/// <param name="RNG">Random Number Generator</param>
/// <returns>Whether the missile has been intercepted</returns>
public static bool FinalDefensiveFire(BindingList <Faction> P, OrdnanceTN Missile, Random RNG)
{
bool Intercept = false;
StarSystem CurrentSystem = Missile.missileGroup.contact.Position.System;
float PointBlank = 10000.0f / (float)Constants.Units.KM_PER_AU;
/// <summary>
/// loop through every faction.
/// </summary>
foreach (Faction faction in P)
{
/// <summary>
/// Is the current faction different from the missile group faction, and does the faction have a detected contacts list for the current system?
/// </summary>
if (faction != Missile.missileGroup.ordnanceGroupFaction && faction.DetectedContactLists.ContainsKey(CurrentSystem) == true)
{
/// <summary>
/// Is the Missile group in this detected contact list?
/// </summary>
if (faction.DetectedContactLists[CurrentSystem].DetectedMissileContacts.ContainsKey(Missile.missileGroup) == true)
{
/// <summary>
/// Is the detection an active detection?
/// </summary>
if (faction.DetectedContactLists[CurrentSystem].DetectedMissileContacts[Missile.missileGroup].active == true)
{
/// <summary>
/// Does this faction have any point defense enabled FCs in this system?
/// </summary>
if (faction.PointDefense.ContainsKey(CurrentSystem) == true)
{
/// <summary>
/// loop through all the possible PD enabled FC.
/// </summary>
foreach (KeyValuePair <ComponentTN, ShipTN> pair in faction.PointDefense[CurrentSystem].PointDefenseFC)
{
ShipTN Ship = pair.Value;
/// <summary>
/// Ship jump sickness will prevent point defense from operating.
/// </summary>
if (Ship.IsJumpSick())
{
continue;
}
/// <summary>
/// Only want BFCs in FDF mode for now.
/// </summary>
if (faction.PointDefense[CurrentSystem].PointDefenseType[pair.Key] == false && pair.Value.ShipBFC[pair.Key.componentIndex].pDState == PointDefenseState.FinalDefensiveFire)
{
BeamFireControlTN ShipBeamFC = pair.Value.ShipBFC[pair.Key.componentIndex];
/// <summary>
/// Do a distance check on pair.Value vs the missile itself. if that checks out to be less than 10k km(or equal to zero), then
/// check to see if the FC can shoot down said missile. This should never be run before a sensor sweep
/// </summary>
float dist = -1;
/// <summary>
/// dist is in AU.
/// </summary>
Missile.missileGroup.contact.DistTable.GetDistance(Ship.ShipsTaskGroup.Contact, out dist);
/// <summary>
/// if distance is less than the 10k km threshold attempt to intercept at Point blank range.
/// </summary>
if (dist < PointBlank)
{
/// <summary>
/// Finally intercept the target.
/// </summary>
bool WF = false;
Intercept = ShipBeamFC.InterceptTarget(RNG, 0, Missile, Ship.ShipsFaction,
Ship.ShipsTaskGroup.Contact, Ship, out WF);
/// <summary>
/// Add this ship to the weapon recharge list since it has fired. This is done here in Sim, or for FDF_Self in Ship.cs
/// </summary>
if (WF == true)
{
if (faction.RechargeList.ContainsKey(Ship) == true)
{
/// <summary>
/// If our recharge value does not have Recharge beams in it(bitflag 2 for now), then add it.
/// </summary>
if ((faction.RechargeList[pair.Value] & (int)Faction.RechargeStatus.Weapons) != (int)Faction.RechargeStatus.Weapons)
{
faction.RechargeList[pair.Value] = (faction.RechargeList[pair.Value] + (int)Faction.RechargeStatus.Weapons);
}
}
else
{
faction.RechargeList.Add(pair.Value, (int)Faction.RechargeStatus.Weapons);
}
}
/// <summary>
/// break out of the first foreach loop.
/// </summary>
if (Intercept == true)
{
break;
}
}
}
}
}
}
}
}
/// <summary>
/// now break out of the faction loop as this missile has been shot down.
/// </summary>
if (Intercept == true)
{
break;
}
}
return(Intercept);
}
/// <summary>
/// Area defensive fire will sweep through a faction's list of BFCs and MFCs to fire at detected ordnance in range.
/// </summary>
/// <param name="Fact">Faction to search for fire controls of</param>
/// <param name="RNG">"global" rng from further up.</param>
public static void AreaDefensiveFire(Faction Fact, Random RNG)
{
/// <summary>
/// No point defense set FCs, just return.
/// </summary>
if (Fact.PointDefense.Count == 0)
{
return;
}
/// <summary>
/// Look through each starsystem with a point defense list.
/// </summary>
foreach (KeyValuePair <StarSystem, PointDefenseList> pair in Fact.PointDefense)
{
StarSystem CurrentSystem = pair.Key;
/// <summary>
/// No detected contacts in this system.
/// </summary>
if (Fact.DetectedContactLists.ContainsKey(CurrentSystem) == false)
{
break;
}
/// <summary>
/// No missile contacts in this system.
/// </summary>
if (Fact.DetectedContactLists[CurrentSystem].DetectedMissileContacts.Count == 0)
{
break;
}
/// <summary>
/// now loop through each FC in the current starsystem.
/// </summary>
foreach (KeyValuePair <ComponentTN, ShipTN> pair2 in pair.Value.PointDefenseFC)
{
/// <summary>
/// The firing ship.
/// </summary>
ShipTN Ship = pair2.Value;
/// <summary>
/// Ship jump sickness will prevent point defense from operating.
/// </summary>
if (Ship.IsJumpSick())
{
continue;
}
/// <summary>
/// BFC set to Area defense mode
/// </summary>
if (pair.Value.PointDefenseType[pair2.Key] == false && pair2.Value.ShipBFC[pair2.Key.componentIndex].pDState == PointDefenseState.AreaDefense)
{
BeamFireControlTN ShipBeamFC = pair2.Value.ShipBFC[pair2.Key.componentIndex];
/// <summary>
/// loop through every missile contact. will have to do distance checks here.
/// </summary>
foreach (KeyValuePair <OrdnanceGroupTN, FactionContact> MisPair in Fact.DetectedContactLists[CurrentSystem].DetectedMissileContacts)
{
OrdnanceGroupTN DetectedMissileGroup = MisPair.Key;
/// <summary>
/// This missile group is already destroyed and will be cleaned up by sim later.
/// </summary>
if (DetectedMissileGroup.missilesDestroyed == DetectedMissileGroup.missiles.Count)
{
break;
}
/// <summary>
/// Do a distance check on pair.Value vs the missile itself. if that checks out to be less than 10k km(or equal to zero), then
/// check to see if the FC can shoot down said missile. This should never be run before a sensor sweep
/// </summary>
float dist;
DetectedMissileGroup.contact.DistTable.GetDistance(Ship.ShipsTaskGroup.Contact, out dist);
/// <summary>
/// Only bother with checks here that are within the maximum beam distance.
/// </summary>
if (dist <= Constants.Units.BEAM_AU_MAX)
{
/// <summary>
/// Value is in units of 10k km
/// </summary>
float rangeAreaDefenseKm;
/// <summary>
/// The user put in an absurdly large value. for convienence, just do this to get maximum range.
/// </summary>
if (ShipBeamFC.pDRange > (float)Constants.Units.TEN_KM_MAX)
{
/// <summary>
/// Max possible beam range in KM.
/// </summary>
rangeAreaDefenseKm = (float)Constants.Units.BEAM_KM_MAX;
}
else
{
#warning magic number related to 10k
rangeAreaDefenseKm = ShipBeamFC.pDRange * 10000.0f;
}
float distKM = dist * (float)Constants.Units.KM_PER_AU;
/// <summary>
/// Additional paranoia check of range, I need to fix Area defense PD range values to ship bfc range in any event, that hasn't been done yet.
/// </summary>
#warning magic number for total bfc range.
float totalRange = ShipBeamFC.beamFireControlDef.range * 2.0f;
float range = Math.Min(totalRange, rangeAreaDefenseKm);
/// <summary>
/// the BFC is set for range defense and is in range of this missile.
/// </summary>
if (distKM <= range)
{
#warning magic number related to 10k km increments.
/// <summary>
/// Increment is a 10k km unit, so distance must be divided by 10000 to yield the appropriate number.
/// </summary>
int increment = (int)Math.Floor((float)distKM / 10000.0f);
bool Intercept = false;
int MissilesToDestroy = 0;
/// <summary>
/// Can't foreach this one, as I do not want every missile, only the ones not destroyed.
/// </summary>
for (int MissileIterator = DetectedMissileGroup.missilesDestroyed; MissileIterator < DetectedMissileGroup.missiles.Count; MissileIterator++)
{
bool WF = false;
Intercept = ShipBeamFC.InterceptTarget(RNG, increment, DetectedMissileGroup.missiles[MissileIterator], Ship.ShipsFaction,
Ship.ShipsTaskGroup.Contact, Ship, out WF);
/// <summary>
/// Add this ship to the weapon recharge list since it has fired. This is done here in Sim, or for FDF_Self in Ship.cs
/// </summary>
if (WF == true)
{
if (Fact.RechargeList.ContainsKey(Ship) == true)
{
/// <summary>
/// If our recharge value does not have Recharge beams in it(bitflag 2 for now), then add it.
/// </summary>
if ((Fact.RechargeList[Ship] & (int)Faction.RechargeStatus.Weapons) != (int)Faction.RechargeStatus.Weapons)
{
Fact.RechargeList[Ship] = (Fact.RechargeList[Ship] + (int)Faction.RechargeStatus.Weapons);
}
}
else
{
Fact.RechargeList.Add(Ship, (int)Faction.RechargeStatus.Weapons);
}
}
if (Intercept == true)
{
/// <summary>
/// Destroy the missile, check if the ordnance group should be removed, if its gone also remove it from the detected contacts list and break that loop.
/// </summary>
MissilesToDestroy++;
}
else if (Intercept == false)
{
/// <summary>
/// This FC can't intercept any more missiles, advance to the next one.
/// </summary>
break;
}
}
/// <summary>
/// Set the missiles destroyed count as appropriate.
/// </summary>
DetectedMissileGroup.missilesDestroyed = DetectedMissileGroup.missilesDestroyed + MissilesToDestroy;
if (DetectedMissileGroup.missilesDestroyed != 0 && Fact.MissileRemoveList.Contains(DetectedMissileGroup) == false)
{
/// <summary>
/// Tell sim to remove missiles from this group, or remove it entirely.
/// </summary>
Fact.MissileRemoveList.Add(DetectedMissileGroup);
}
if (Intercept == false)
{
/// <summary>
/// This condition means advance to the next FC.
/// </summary>
break;
}
}
}
}
}
/// <summary>
/// MFC set to any pd mode that can be applied: 1v2 up to 5v1.
/// </summary>
else if (pair.Value.PointDefenseType[pair2.Key] == true && pair2.Value.ShipMFC[pair2.Key.componentIndex].pDState >= PointDefenseState.AMM1v2 &&
pair2.Value.ShipMFC[pair2.Key.componentIndex].pDState <= PointDefenseState.AMM5v1)
{
MissileFireControlTN ShipMissileFC = pair2.Value.ShipMFC[pair2.Key.componentIndex];
int MissilesLaunched = 0;
int MissilesToLaunch = 0;
foreach (KeyValuePair <OrdnanceGroupTN, FactionContact> MisPair in Fact.DetectedContactLists[CurrentSystem].DetectedMissileContacts)
{
OrdnanceGroupTN DetectedMissileGroup = MisPair.Key;
/// <summary>
/// Advance to next missile group.
/// </summary>
if (DetectedMissileGroup.missilesDestroyed == DetectedMissileGroup.missiles.Count)
{
break;
}
/// <summary>
/// Do a distance check on pair.Value vs the missile itself. if that checks out to be less than 10k km(or equal to zero), then
/// check to see if the FC can shoot down said missile. This should never be run before a sensor sweep
/// </summary>
float dist;
DetectedMissileGroup.contact.DistTable.GetDistance(Ship.ShipsTaskGroup.Contact, out dist);
float MFCEngageDistKm = ShipMissileFC.mFCSensorDef.maxRange;
float rangeAreaDefenseKm = ShipMissileFC.pDRange;
/// <summary>
/// Range is in 10K units so it has to be adjusted to AU for later down.
/// </summary>
#warning magic 10k number here
float range = (Math.Min(MFCEngageDistKm, rangeAreaDefenseKm) / (float)Constants.Units.KM_PER_AU);
range = range * 10000.0f;
int MSize = 0;
int AltMSize = 0;
#warning the +6 is another magic number.
if ((int)Math.Ceiling(DetectedMissileGroup.missiles[0].missileDef.size) <= (Constants.OrdnanceTN.MissileResolutionMinimum + 6))
{
MSize = Constants.OrdnanceTN.MissileResolutionMinimum;
AltMSize = 0;
}
else if ((int)Math.Ceiling(DetectedMissileGroup.missiles[0].missileDef.size) <= (Constants.OrdnanceTN.MissileResolutionMaximum + 6))
{
MSize = (int)Math.Ceiling(DetectedMissileGroup.missiles[0].missileDef.size);
AltMSize = 0;
}
else if ((int)Math.Ceiling(DetectedMissileGroup.missiles[0].missileDef.size) > (Constants.OrdnanceTN.MissileResolutionMaximum + 6))
{
MSize = -1;
AltMSize = (int)Math.Ceiling(Math.Ceiling(DetectedMissileGroup.missiles[0].missileDef.size) / (Constants.OrdnanceTN.MissileResolutionMaximum + 6));
}
int MFCRange = ShipMissileFC.mFCSensorDef.GetActiveDetectionRange(AltMSize, MSize);
bool CanDetect = Fact.LargeDetection(dist, MFCRange);
/// <summary>
/// Can this MFC fire on the targetted missile?
/// </summary>
if (CanDetect == true && dist <= range)
{
/// <summary>
/// Do AMM defense here. Check to see how many amms are targeted on this missile, if less than defense setting fire more.
/// How do I handle 1v2 mode? rounding obviously. if more than 1 missile in group send half, send atleast 1 for 1, and round for odd missile amounts.
/// missiles won't be destroyed here, as they were in beam fire mode, this will just launch amms at missile groups.
/// </summary>
/// <summary>
/// Get total missiles currently targetted on this group. Keeping track of a total missiles incoming variable would mean handling a lot of interactions where
/// missiles can be destroyed, run out of fuel, etc. so I'll just loop through this for now.
/// </summary>
#warning this missile count can be optimized, but it would be difficult to do so.
int TotalCount = 0;
foreach (OrdnanceGroupTN OrdGroupTargetting in DetectedMissileGroup.ordGroupsTargetting)
{
TotalCount = TotalCount + OrdGroupTargetting.missiles.Count;
}
float Value = TotalCount / DetectedMissileGroup.missiles.Count;
switch (ShipMissileFC.pDState)
{
#warning more magic numbers in how point defense states are handled.
case PointDefenseState.AMM1v2:
if (Value < 0.5f)
{
int Max = (int)Math.Ceiling((float)DetectedMissileGroup.missiles.Count / 2.0f);
MissilesToLaunch = Max - TotalCount;
}
break;
case PointDefenseState.AMM1v1:
if (Value < 1.0f)
{
int Max = DetectedMissileGroup.missiles.Count;
MissilesToLaunch = Max - TotalCount;
}
break;
case PointDefenseState.AMM2v1:
if (Value < 2.0f)
{
int Max = DetectedMissileGroup.missiles.Count * 2;
MissilesToLaunch = Max - TotalCount;
}
break;
case PointDefenseState.AMM3v1:
if (Value < 3.0f)
{
int Max = DetectedMissileGroup.missiles.Count * 3;
MissilesToLaunch = Max - TotalCount;
}
break;
case PointDefenseState.AMM4v1:
if (Value < 4.0f)
{
int Max = DetectedMissileGroup.missiles.Count * 4;
MissilesToLaunch = Max - TotalCount;
}
break;
case PointDefenseState.AMM5v1:
if (Value < 5.0f)
{
int Max = DetectedMissileGroup.missiles.Count * 5;
MissilesToLaunch = Max - TotalCount;
}
break;
}
if (MissilesToLaunch != 0)
{
/// <summary>
/// launch up to MissilesToLaunch amms in a new ord group at the target.
/// <summary>
MissilesLaunched = ShipMissileFC.FireWeaponsPD(Ship.ShipsTaskGroup, Ship, DetectedMissileGroup, MissilesToLaunch);
/// <summary>
/// Add this ship to the weapon recharge list since it has fired. This is done here in Sim, or for FDF_Self in Ship.cs
/// </summary>
if (MissilesLaunched != 0)
{
if (Fact.RechargeList.ContainsKey(Ship) == true)
{
/// <summary>
/// If our recharge value does not have Recharge beams in it(bitflag 2 for now), then add it.
/// </summary>
if ((Fact.RechargeList[Ship] & (int)Faction.RechargeStatus.Weapons) != (int)Faction.RechargeStatus.Weapons)
{
Fact.RechargeList[Ship] = (Fact.RechargeList[Ship] + (int)Faction.RechargeStatus.Weapons);
}
}
else
{
Fact.RechargeList.Add(Ship, (int)Faction.RechargeStatus.Weapons);
}
}
/// <summary>
/// This FC can no longer fire at ordnance groups in range.
/// </summary>
if (MissilesLaunched != MissilesToLaunch)
{
break;
}
}
}
/// <summary>
/// advance to the next FC.
/// </summary>
if (MissilesLaunched != MissilesToLaunch && MissilesToLaunch != 0)
{
break;
}
}
}
}
}
}