private void ReadAsOldPalleteA(AsepriteReader reader)
{
// Read the number of packets
ushort numberOfPackets = reader.ReadWORD();
List <AsepritePaletteColor> colors = new List <AsepritePaletteColor>();
for (int i = 0; i < numberOfPackets; i++)
{
// Read the number of palette entries to skip from the last packet
// But we're going to ignore the value since we don't need it.
_ = reader.ReadByte();
// Read the number of colors in the packet
int numberOfColors = reader.ReadByte();
if (numberOfColors == 0)
{
numberOfColors = 256;
}
for (int c = 0; c < numberOfColors; c++)
{
colors.Add(new AsepritePaletteColor(reader, false));
}
}
Colors = colors.ToArray();
}
/// <summary>
/// Creates a new <see cref="AsepritePaletteColor"/> instance.
/// </summary>
/// <param name="reader">
/// The <see cref="AsepriteReader"/> instance being used to read the
/// Aseprite file.
/// </param>
internal AsepritePaletteColor(AsepriteReader reader, bool isNewPalette)
{
if (isNewPalette)
{
// Only read flag if this is the new palette type.
_flag = (AsepritePaletteFlags)reader.ReadWORD();
}
Red = reader.ReadByte();
Green = reader.ReadByte();
Blue = reader.ReadByte();
if (isNewPalette)
{
// Only read alpha value if this is the new palette type
Alpha = reader.ReadByte();
}
else
{
Alpha = 255;
}
PackedValue = Utils.BytesToPacked(Red, Green, Blue, Alpha);
// If the HasName flag is present, we need to read the string value, however
// this seems to always never exist. Not sure what the field is for, but may
// just be some compatibility thing with named palette formats like .gpl.
if ((_flag & AsepritePaletteFlags.HasName) != 0)
{
Name = reader.ReadString();
}
}
/// <summary>
/// Creates a new <see cref="AsepriteLayerChunk"/> instance.
/// </summary>
/// <param name="reader">
/// The <see cref="AsepriteReader"/> instance being used to read the
/// Aseprite file.
/// </param>
internal AsepriteLayerChunk(AsepriteReader reader)
{
// Read the flags that are set for this layer.
Flags = (AsepriteLayerFlags)reader.ReadWORD();
// Read the type of layer we're dealing with.
Type = (AsepriteLayerType)reader.ReadWORD();
// Read the sub level of this layer. If this layer is not a
// child layer, this value will be 0.
ChildLevel = reader.ReadWORD();
// Per ase file spec, default layer width in pixels is ignored
_ = reader.ReadWORD();
// Per ase file spec, default layer height in pixels is ignored
_ = reader.ReadWORD();
// Read the blend mode used by this layer.
BlendMode = (AsepriteBlendMode)reader.ReadWORD();
// Read the opacity level for this layer.
Opacity = reader.ReadByte();
// Per ase file spec, ignroe next 3 bytes, they are reserved for future use
reader.Ignore(3);
// Read the name of this layer.
Name = reader.ReadString();
}
/// <summary>
/// Reads the userdata values for this chunk from the provided
/// reader.
/// </summary>
/// <param name="reader">
/// The <see cref="AsepriteReader"/> instance being used to read the
/// Aseprite file.
/// </param>
internal void ReadUserData(AsepriteReader reader)
{
AsepriteUserDataFlags flags = (AsepriteUserDataFlags)reader.ReadDWORD();
if ((flags & AsepriteUserDataFlags.HasText) != 0)
{
UserDataText = reader.ReadString();
}
if ((flags & AsepriteUserDataFlags.HasColor) != 0)
{
UserDataColor = new byte[4];
UserDataColor[0] = reader.ReadByte();
UserDataColor[1] = reader.ReadByte();
UserDataColor[2] = reader.ReadByte();
UserDataColor[3] = reader.ReadByte();
}
}
/// <summary>
/// Creates a new <see cref="AsepriteTagChunk"/> instance.
/// </summary>
/// <param name="reader">
/// The <see cref="AsepriteReader"/> instance being used to read the
/// Aseprite file.
/// </param>
internal AsepriteTagChunk(AsepriteReader reader)
{
From = reader.ReadWORD();
To = reader.ReadWORD();
Direction = (AsepriteLoopDirection)reader.ReadByte();
// Per ase file spec, ignore next 8 bytes, they are reserved for future use
reader.Ignore(8);
ColorR = reader.ReadByte();
ColorG = reader.ReadByte();
ColorB = reader.ReadByte();
// Per ase file spec, ignore next byte, it's just an extra one set to zero
reader.Ignore(1);
Name = reader.ReadString();
}
/// <summary>
/// Creates a new <see cref="AsepriteHeader"/> instance.
/// </summary>
/// <param name="reader">
/// The <see cref="AsepriteReader"/> instance being used to read the
/// Aseprite file.
/// </param>
internal AsepriteHeader(AsepriteReader reader)
{
// Get the basestream position of the reader
long headerStart = reader.BaseStream.Position;
// Header is 128 bytes. Calcualte the base stream position that is
// at the end of the header
long headerEnd = headerStart + 128;
// Read but ignore the file size
_ = reader.ReadDWORD();
// Read and validate the magic number
if (reader.ReadWORD() != 0xA5E0)
{
throw new Exception($"File given does not appear to be a valid .ase/.aseprite file!");
}
FrameCount = reader.ReadWORD();
Width = reader.ReadWORD();
Height = reader.ReadWORD();
ColorDepth = (AsepriteColorDepth)(reader.ReadWORD() / 8);
_flags = (AsepriteHeaderFlags)reader.ReadDWORD();
// Per ase file specs, the speed field is deprecated, so we'll
// ignroe it.
_ = reader.ReadWORD();
// Per ase file specs, next two DWORDs are ignored.
_ = reader.ReadDWORD();
_ = reader.ReadDWORD();
TransparentIndex = reader.ReadByte();
// Per ase file specs, next 3 bytes are ignored
reader.Ignore(3);
ColorCount = reader.ReadWORD();
// We're going to ignore the rest of the header as we don't need
// the information. For documentation though, the following is
// what we are skipping
//
// Pixel Width
// Pixel Height
// X position of the grid
// Y position of the grid
// Grid width (zero if there is no grid, grid size is 16x16 on Aseprite default)
// Grid height (zero if there is no grid
// 84 bytes which are reserved for future use.
//
// Since we are skipping all this, we'll just set the reader's basestream to
// the end of the header position we calculated earlier
reader.BaseStream.Position = headerEnd;
}
/// <summary>
/// Creates a new <see cref="AsepriteCelChunk"/> instance.
/// <param name="reader">
/// The <see cref="AsepriteReader"/> instance being used to read the
/// Aseprite file.
/// </param>
/// <param name="frame">
/// The <see cref="AsepriteFrame"/> this cel is contained within.
/// </param>
/// <param name="dataSize">
/// The total byte size of the data for this cel chunk.
/// </param>
internal AsepriteCelChunk(AsepriteReader reader, AsepriteFrame frame, int dataSize)
{
// We need to cache the position of the reader before reading any data so we can
// calculate the amount of data to read later for the pixel info.
long readerPos = reader.BaseStream.Position;
LayerIndex = reader.ReadWORD();
X = reader.ReadSHORT();
Y = reader.ReadSHORT();
Opacity = reader.ReadByte();
CelType = (AsepriteCelType)reader.ReadWORD();
// Per ase file spec, ignore next 7 bytes, they are reserved for future use.
reader.Ignore(7);
if (CelType == AsepriteCelType.Raw || CelType == AsepriteCelType.Compressed)
{
Width = reader.ReadWORD();
Height = reader.ReadWORD();
// Calculate the remaning data to read in the cel chunk
long bytesToRead = dataSize - (reader.BaseStream.Position - readerPos);
// Read the remaning bytes into a buffer
byte[] buffer = reader.ReadBytes((int)bytesToRead);
if (CelType == AsepriteCelType.Raw)
{
// For raw cel, the buffer is the raw pixel data
PixelData = new byte[buffer.Length];
Buffer.BlockCopy(buffer, 0, PixelData, 0, buffer.Length);
}
else
{
// For compressed, we need to deflate the buffer. First, we'll put it in a
// memory stream to work with
MemoryStream compressedStream = new MemoryStream(buffer);
// The first 2 bytes of the compressed stream are the zlib header informaiton,
// and we need to ignore them before we attempt to deflate
_ = compressedStream.ReadByte();
_ = compressedStream.ReadByte();
// Now we can deflate the compressed stream
using (MemoryStream decompressedStream = new MemoryStream())
{
using (DeflateStream deflateStream = new DeflateStream(compressedStream, CompressionMode.Decompress))
{
deflateStream.CopyTo(decompressedStream);
PixelData = decompressedStream.ToArray();
}
}
}
Pixels = new uint[Width * Height];
if (frame.File.Header.ColorDepth == AsepriteColorDepth.RGBA)
{
for (int i = 0, b = 0; i < Pixels.Length; i++, b += 4)
{
Pixels[i] = Utils.BytesToPacked(PixelData[b], PixelData[b + 1], PixelData[b + 2], PixelData[b + 3]);
}
}
else if (frame.File.Header.ColorDepth == AsepriteColorDepth.Grayscale)
{
for (int i = 0, b = 0; i < Pixels.Length; i++, b += 2)
{
Pixels[i] = Utils.BytesToPacked(PixelData[b], PixelData[b], PixelData[b], PixelData[b + 1]);
}
}
else if (frame.File.Header.ColorDepth == AsepriteColorDepth.Indexed)
{
for (int i = 0; i < Pixels.Length; i++)
{
int paletteIndex = PixelData[i];
if (paletteIndex == frame.File.Header.TransparentIndex)
{
Pixels[i] = Utils.BytesToPacked(0, 0, 0, 0);
}
else
{
AsepritePaletteColor paletteColor = frame.File.Palette.Colors[paletteIndex];
Microsoft.Xna.Framework.Color color = new Microsoft.Xna.Framework.Color(paletteColor.PackedValue);
Pixels[i] = Utils.BytesToPacked(paletteColor.Red, paletteColor.Green, paletteColor.Blue, paletteColor.Alpha);
}
}
}
else
{
throw new Exception($"Unrecognized color depth mode. {frame.File.Header.ColorDepth}");
}
}
else if (CelType == AsepriteCelType.Linked)
{
ushort linkedFrame = reader.ReadWORD();
// Get a refrence to the cel this cel is linked to.
LinkedCel = frame.File.Frames[linkedFrame].Cels
.FirstOrDefault(c => c.LayerIndex == LayerIndex);
}
}